LC4064B-75T48I - 64-Macrocell 7.5ns CPLD | Lattice
Артикул: LC4064B-75T48I ✗ Снят с производстваLC4064B-75T48I Обзор
A complex programmable logic device, commonly called a CPLD, combines programmable AND/OR logic structures with a non-volatile configuration architecture. Within the broader semiconductor hierarchy, a CPLD sits between simple programmable logic arrays and larger FPGAs. It is used where deterministic timing, compact implementation, and non-volatile logic configuration are more important than the very high logic density available in an FPGA.
The LC4064B-75T48I provides 64 macrocells, a 7.5 ns speed designation, and in-system programming. Its 1.8 V, 2.5 V, and 3.3 V core-voltage choices allow the device to be integrated with systems using more than one common logic-voltage range. The 48-pin TQFP package also provides a conventional surface-mount format for automated assembly and prototype-board construction.
The -75 suffix identifies the 7.5 ns speed grade, while the -48I ordering code corresponds to the 48-pin industrial-temperature option. The I designation identifies the extended industrial temperature range. For timing-critical designs, engineers should treat the 7.5 ns value as the device speed designation and use the manufacturer datasheet for individual path-delay, setup, hold, and AC-parameter limits rather than assuming that every signal path has identical delay.
Typical uses include industrial control logic, peripheral interface decoding, data-routing networks, embedded control glue logic, and legacy system upgrades. The device is especially relevant when a design requires a non-volatile programmable logic solution with moderate density, predictable package availability, and in-system configuration capability.
PCB design should preserve the device's required power, ground, configuration, clock, and I/O routing according to the manufacturer datasheet. Because the LC4064B is an older programmable-logic family, engineers should verify tool support, JEDEC programming-file compatibility, and the availability of a suitable design compiler before committing new production hardware.
This page combines the core device identity, operating options, drop-in replacement candidates, comparison parameters, and implementation guidance. It also highlights the practical checks needed when programming files, industrial-temperature requirements, package fit, and replacement timing ratings must all be evaluated together.
Аналоги без доработки для LC4064B-75T48I — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с LC4064B-75T48I (тот же форм-фактор и посадочное место) — отличается по Speed Grade.
LC4064B-75TN48I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LC4064V-75T48I
✅ Прямая заменаУточнить цену
Открыть даташит →LC4064V-75TN48C
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LC4064ZC-75T48I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LC4064B-5TN48I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LC4064V-10TN48I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LC4064B-75T48I Максимальные параметры и электрические характеристики
| Device Type | Complex Programmable Logic Device (CPLD) |
| Macrocell Count | 64 macrocells |
| Speed Grade | 7.5 ns |
| Корпус | 48-pin TQFP |
| Тип монтажа | Surface mount |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Programmability | In-system programmable |
| Temperature Grade | Industrial temperature range |
| Logic Family | Super Fast High Density PLD |
| Manufacturer | Lattice Semiconductor Corporation |
| Manufacturer Part Number | LC4064B-75T48I |
| Manufacturer Lead Time | 20 weeks |
Руководство по цоколевке LC4064B-75T48I в корпусе 48-pin tqfp
Цоколевка для LC4064B-75T48I (корпус 48-pin tqfp). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для LC4064B-75T48I.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
LC4064B-75T48I подходит для 6 применениеs: Industrial Control Logic, Peripheral Interface Decoding, Data Routing and Signal Conditioning, Legacy System Maintenance, Instrumentation Control Front Ends, Embedded Communication Adapters.
Industrial Control Logic
The LC4064B-75T48I is suitable for compact industrial control logic that combines state-machine decoding, interlocks, and discrete signal routing. Its 64 macrocells provide a direct implementation platform without using a larger FPGA, while the 7.5 ns speed grade supports designs where predictable combinational delays matter. The industrial -I ordering suffix supports its use in extended-temperature equipment, subject to the exact limits in the manufacturer datasheet. Engineers should place its supply and ground connections according to the recommended layout and validate every timing path against the worst-case operating conditions.
Рекомендуется
Peripheral Interface Decoding
The LC4064B-75T48I can implement address decoding, interrupt-request routing, register-overlay control, and programmable bus isolation around a host processor. Its 7.5 ns nominal speed grade allows it to perform common decode-and-glue functions without relying on a high-speed FPGA. The 48-pin TQFP package is convenient for conventional assembly and board repair. Because this is a legacy CPLD, verify that the required compiler can target the device and reproduce the original configuration file before introducing it into a new processor interface.
Рекомендуется
Data Routing and Signal Conditioning
The LC4064B-75T48I can implement fixed routing networks, format converters, pulse stretchers, and deterministic fan-out logic in instrumentation and embedded systems. Sixty-four macrocells provide sufficient capacity for multiple parallel datapaths while preserving a compact 48-pin TQFP footprint. The 7.5 ns speed designation helps constrain propagation delay in short control paths, although each implemented route must be checked using the device's timing tables. The in-system-programmable architecture also supports configuration updates without changing the board's component arrangement.
Рекомендуется
Legacy System Maintenance
The LC4064B-75T48I is most appropriate for maintaining equipment in which its configuration file, board layout, and timing assumptions already depend on this exact CPLD. Its 64-macrocell architecture and 48-pin TQFP package make board-level replacement preferable to redesigning an obsolete control assembly. Before committing a repair, confirm that the replacement has the same pin assignment, acceptable supply voltage, supported programming method, and the required operating-temperature grade. Saving the programming configuration as a controlled manufacturing artifact reduces the risk of an otherwise pin-compatible but functionally incompatible substitution.
Рекомендуется
Instrumentation Control Front Ends
The LC4064B-75T48I can implement sequencing, measurement-valid strobes, mode control, and calibration tables in test and measurement instruments. Its 7.5 ns speed grade is useful for short control paths that must coordinate multiple external circuits, while 64 macrocells allow several functions to remain in one programmable device. The 48-pin TQFP package supports repair and prototype assembly. For new instruments, engineers should verify long-term tool support and compare a current CPLD or FPGA when the design requires more I/O, higher clocking, or faster parallel interfaces.
Рекомендуется
Embedded Communication Adapters
The LC4064B-75T48I can provide protocol steering, command decoding, FIFO control, and status-signal generation around serial or network interface components. Its non-volatile programmable configuration allows the same physical adapter board to implement different protocol variants, while the 7.5 ns speed grade supports fast control-path decoding. The industrial ordering suffix can suit extended-temperature networking equipment, although system-level environmental requirements must still be checked. Route high-speed communications away from the CPLD where practical and observe the manufacturer's grounding and decoupling recommendations.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для LC4064B-75T48I — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LC4064B-75TN48I | LC4064V-75T48I | LC4064V-75TN48C | LC4064ZC-75T48I |
|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD |
| Speed Grade | 7.5 ns | 7.5 ns | 7.5 ns | 7.5 ns | 7.5 ns |
| Temperature Ordering Suffix | Industrial (-I) | Industrial (-I) | Industrial (-I) | Commercial (-C) | Industrial (-I) |
Ключевые отличия
- Faster nominal speed grade than the 10 ns replacement (против LC4064V-10TN48I)
- Industrial ordering option preserves temperature-oriented sourcing (против LC4064V-75TN48C)
- Same 7.5 ns and 48-pin TQFP identity as the closest related variant (против LC4064B-75TN48I)
Заметки по проектированию
Do not treat matching package dimensions and speed-grade suffixes as proof of drop-in compatibility. Before releasing a substitute, compare the complete pin-description table, supply-voltage requirements, configuration pins, dedicated inputs, and programming interface against the original board. The closest LC4064 family members share the 48-pin TQFP format, but their ordering codes can indicate different speed, voltage, or temperature options.
Follow the manufacturer datasheet's power, ground, decoupling, and programming-pin layout exactly. Keep the CPLD close enough to its support circuitry to minimize return-path inductance, provide a low-impedance ground reference, and route sensitive configuration or clock signals away from noisy switching nodes. For maintenance boards, compare the original PCB against the replacement datasheet rather than assuming that every 48-pin TQFP device has identical pin functions.
Confirm the core voltage and external-interface voltage ranges before connecting any signal. The device supports 1.8 V, 2.5 V, and 3.3 V operation, but allowable input levels depend on the selected supply configuration and operating state. Use the manufacturer electrical-characteristics tables to verify input thresholds, output-current limits, and power-down behavior; otherwise a nominally compatible replacement can create an unsafe or unreliable interface.
Preserve the original configuration file and record the programmer, cable, fuse settings, and design-software version used for production. Legacy CPLDs may use JEDEC configuration files that appear interchangeable but are rejected by a programmer if device identification, voltage, or lock-bit settings differ. A controlled programming procedure is essential for maintenance, repair, and obsolescence management.
Информация о соответствии
The -I suffix identifies the industrial ordering option, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration is confirmed for this exact MPN.