LC4064B-75T48I - 64-Macrocell 7.5ns CPLD | Lattice
MPN: LC4064B-75T48I ✗ 停產LC4064B-75T48I 概覽
A complex programmable logic device, commonly called a CPLD, combines programmable AND/OR logic structures with a non-volatile configuration architecture. Within the broader semiconductor hierarchy, a CPLD sits between simple programmable logic arrays and larger FPGAs. It is used where deterministic timing, compact implementation, and non-volatile logic configuration are more important than the very high logic density available in an FPGA.
The LC4064B-75T48I provides 64 macrocells, a 7.5 ns speed designation, and in-system programming. Its 1.8 V, 2.5 V, and 3.3 V core-voltage choices allow the device to be integrated with systems using more than one common logic-voltage range. The 48-pin TQFP package also provides a conventional surface-mount format for automated assembly and prototype-board construction.
The -75 suffix identifies the 7.5 ns speed grade, while the -48I ordering code corresponds to the 48-pin industrial-temperature option. The I designation identifies the extended industrial temperature range. For timing-critical designs, engineers should treat the 7.5 ns value as the device speed designation and use the manufacturer datasheet for individual path-delay, setup, hold, and AC-parameter limits rather than assuming that every signal path has identical delay.
Typical uses include industrial control logic, peripheral interface decoding, data-routing networks, embedded control glue logic, and legacy system upgrades. The device is especially relevant when a design requires a non-volatile programmable logic solution with moderate density, predictable package availability, and in-system configuration capability.
PCB design should preserve the device's required power, ground, configuration, clock, and I/O routing according to the manufacturer datasheet. Because the LC4064B is an older programmable-logic family, engineers should verify tool support, JEDEC programming-file compatibility, and the availability of a suitable design compiler before committing new production hardware.
This page combines the core device identity, operating options, drop-in replacement candidates, comparison parameters, and implementation guidance. It also highlights the practical checks needed when programming files, industrial-temperature requirements, package fit, and replacement timing ratings must all be evaluated together.
直接替換替代品,適用於 LC4064B-75T48I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LC4064B-75T48I (相同外形與佔位) — 差異在於 Speed Grade.
LC4064B-75TN48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064V-75T48I
✅ 直接替換聯絡詢價
查看資料表 →LC4064V-75TN48C
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064ZC-75T48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064B-5TN48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064V-10TN48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064B-75T48I 最大額定值與電氣特性
| Device Type | Complex Programmable Logic Device (CPLD) |
| Macrocell Count | 64 macrocells |
| Speed Grade | 7.5 ns |
| 封裝 | 48-pin TQFP |
| 安裝類型 | Surface mount |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
| Programmability | In-system programmable |
| Temperature Grade | Industrial temperature range |
| Logic Family | Super Fast High Density PLD |
| Manufacturer | Lattice Semiconductor Corporation |
| Manufacturer Part Number | LC4064B-75T48I |
| Manufacturer Lead Time | 20 weeks |
LC4064B-75T48I 48-pin tqfp 腳位配置指南
LC4064B-75T48I(48-pin tqfp 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LC4064B-75T48I.
請參閱 資料表 以查看完整腳位配置。
典型應用
LC4064B-75T48I 適用於 6 應用s: Industrial Control Logic, Peripheral Interface Decoding, Data Routing and Signal Conditioning, Legacy System Maintenance, Instrumentation Control Front Ends, Embedded Communication Adapters.
Industrial Control Logic
The LC4064B-75T48I is suitable for compact industrial control logic that combines state-machine decoding, interlocks, and discrete signal routing. Its 64 macrocells provide a direct implementation platform without using a larger FPGA, while the 7.5 ns speed grade supports designs where predictable combinational delays matter. The industrial -I ordering suffix supports its use in extended-temperature equipment, subject to the exact limits in the manufacturer datasheet. Engineers should place its supply and ground connections according to the recommended layout and validate every timing path against the worst-case operating conditions.
推薦
Peripheral Interface Decoding
The LC4064B-75T48I can implement address decoding, interrupt-request routing, register-overlay control, and programmable bus isolation around a host processor. Its 7.5 ns nominal speed grade allows it to perform common decode-and-glue functions without relying on a high-speed FPGA. The 48-pin TQFP package is convenient for conventional assembly and board repair. Because this is a legacy CPLD, verify that the required compiler can target the device and reproduce the original configuration file before introducing it into a new processor interface.
推薦
Data Routing and Signal Conditioning
The LC4064B-75T48I can implement fixed routing networks, format converters, pulse stretchers, and deterministic fan-out logic in instrumentation and embedded systems. Sixty-four macrocells provide sufficient capacity for multiple parallel datapaths while preserving a compact 48-pin TQFP footprint. The 7.5 ns speed designation helps constrain propagation delay in short control paths, although each implemented route must be checked using the device's timing tables. The in-system-programmable architecture also supports configuration updates without changing the board's component arrangement.
推薦
Legacy System Maintenance
The LC4064B-75T48I is most appropriate for maintaining equipment in which its configuration file, board layout, and timing assumptions already depend on this exact CPLD. Its 64-macrocell architecture and 48-pin TQFP package make board-level replacement preferable to redesigning an obsolete control assembly. Before committing a repair, confirm that the replacement has the same pin assignment, acceptable supply voltage, supported programming method, and the required operating-temperature grade. Saving the programming configuration as a controlled manufacturing artifact reduces the risk of an otherwise pin-compatible but functionally incompatible substitution.
推薦
Instrumentation Control Front Ends
The LC4064B-75T48I can implement sequencing, measurement-valid strobes, mode control, and calibration tables in test and measurement instruments. Its 7.5 ns speed grade is useful for short control paths that must coordinate multiple external circuits, while 64 macrocells allow several functions to remain in one programmable device. The 48-pin TQFP package supports repair and prototype assembly. For new instruments, engineers should verify long-term tool support and compare a current CPLD or FPGA when the design requires more I/O, higher clocking, or faster parallel interfaces.
推薦
Embedded Communication Adapters
The LC4064B-75T48I can provide protocol steering, command decoding, FIFO control, and status-signal generation around serial or network interface components. Its non-volatile programmable configuration allows the same physical adapter board to implement different protocol variants, while the 7.5 ns speed grade supports fast control-path decoding. The industrial ordering suffix can suit extended-temperature networking equipment, although system-level environmental requirements must still be checked. Route high-speed communications away from the CPLD where practical and observe the manufacturer's grounding and decoupling recommendations.
推薦
推薦產品摘要
工程參考資料,適用於 LC4064B-75T48I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LC4064B-75TN48I | LC4064V-75T48I | LC4064V-75TN48C | LC4064ZC-75T48I |
|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD |
| Speed Grade | 7.5 ns | 7.5 ns | 7.5 ns | 7.5 ns | 7.5 ns |
| Temperature Ordering Suffix | Industrial (-I) | Industrial (-I) | Industrial (-I) | Commercial (-C) | Industrial (-I) |
主要差異化特點
- Faster nominal speed grade than the 10 ns replacement (對比LC4064V-10TN48I)
- Industrial ordering option preserves temperature-oriented sourcing (對比LC4064V-75TN48C)
- Same 7.5 ns and 48-pin TQFP identity as the closest related variant (對比LC4064B-75TN48I)
設計說明
Do not treat matching package dimensions and speed-grade suffixes as proof of drop-in compatibility. Before releasing a substitute, compare the complete pin-description table, supply-voltage requirements, configuration pins, dedicated inputs, and programming interface against the original board. The closest LC4064 family members share the 48-pin TQFP format, but their ordering codes can indicate different speed, voltage, or temperature options.
Follow the manufacturer datasheet's power, ground, decoupling, and programming-pin layout exactly. Keep the CPLD close enough to its support circuitry to minimize return-path inductance, provide a low-impedance ground reference, and route sensitive configuration or clock signals away from noisy switching nodes. For maintenance boards, compare the original PCB against the replacement datasheet rather than assuming that every 48-pin TQFP device has identical pin functions.
Confirm the core voltage and external-interface voltage ranges before connecting any signal. The device supports 1.8 V, 2.5 V, and 3.3 V operation, but allowable input levels depend on the selected supply configuration and operating state. Use the manufacturer electrical-characteristics tables to verify input thresholds, output-current limits, and power-down behavior; otherwise a nominally compatible replacement can create an unsafe or unreliable interface.
Preserve the original configuration file and record the programmer, cable, fuse settings, and design-software version used for production. Legacy CPLDs may use JEDEC configuration files that appear interchangeable but are rejected by a programmer if device identification, voltage, or lock-bit settings differ. A controlled programming procedure is essential for maintenance, repair, and obsolescence management.
合規資訊
The -I suffix identifies the industrial ordering option, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration is confirmed for this exact MPN.