LC4064V-10T44I - 64-Macrocell 3.3V CPLD | Lattice
Артикул: LC4064V-10T44I ✗ Снят с производстваLC4064V-10T44I Обзор
A CPLD is a programmable logic device in the FPGA and CPLD hierarchy. Unlike a mask-programmed logic device, a CPLD retains its configuration in nonvolatile memory and can be reprogrammed during manufacturing, prototyping, or field updates. Its macrocell-based architecture provides deterministic combinational and registered logic implementation, making the LC4064V useful for control logic, interface translation, bus arbitration, and fixed-format signal processing.
The -10 speed designation identifies a 125 MHz-class device in the ispMACH 4000V family, while the T44 suffix denotes the 44-pin TQFP package and the I suffix identifies the industrial temperature grade. The family information identifies 64 macrocells and a 3.3 V supply, with 30 available I/Os. These characteristics make the LC4064V-10T44I appropriate for compact industrial, communications, control, and legacy system designs requiring nonvolatile reconfiguration.
The ispMACH 4000V architecture is intended for designs that need more logic density than small PAL devices without moving to a large FPGA. Its 125 MHz-class timing supports faster control paths than typical low-cost GAL and PAL logic. The TQFP-44 surface-mount package also provides a practical route for automated assembly and prototype fabrication where fine-pitch BGA packages would complicate inspection or rework.
Typical applications include industrial control interfaces, peripheral bus controllers, status and sequencing logic, data-acquisition front ends, communications adapters, and embedded system glue logic. The 30-I/O configuration allows the device to bridge multiple digital interfaces while the nonvolatile configuration simplifies repeatable production and field reconfiguration.
Board design must preserve the package footprint, programming interface, and supported I/O standards of the original LC4064V-10T44I. Verify signal voltage levels, unused pins, clock constraints, and programming voltage against the manufacturer datasheet. Because the exact pin names and complete electrical limits are not reproduced in the retrieved technical summaries, use the manufacturer pin-description table when assigning every package connection.
This product record combines the exact manufacturer-family specifications, lifecycle information, drop-in cross-reference findings, and practical selection guidance. It also distinguishes confirmed TQFP-44 replacements from larger-package devices that are not direct PCB drop-ins, helping engineers evaluate replacements without confusing electrical equivalence with physical compatibility.
Аналоги без доработки для LC4064V-10T44I — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с LC4064V-10T44I (тот же форм-фактор и посадочное место) — отличается по Mounting Type, Package, Product Family, Speed Grade.
LC4064V-10TN44I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LC4064C-10T44I
✅ Прямая заменаУточнить цену
Открыть даташит →LC4032V-10T44I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LC4064V-10T44I Максимальные параметры и электрические характеристики
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000V |
| Architecture Description | Blend of ispLSI 2000 and ispMACH 4A architectures |
| Macrocell Count | 64 macrocells |
| User I/O Count | 30 I/Os |
| Рабочее напряжение питания | 3.3 V |
| Supported Programming Voltages | 3.3 V / 2.5 V / 1.8 V |
| Speed Grade | 125 MHz |
| Speed Designator | -10 |
| Programmable Logic Type | SuperFAST high-density PLD |
| Configuration Method | In-System Programmable |
| Корпус | TQFP-44 |
| Тип монтажа | SMD/SMT |
| Industrial Temperature Range | -40°C to +105°C |
| Статус жизненного цикла | Discontinued |
Руководство по цоколевке LC4064V-10T44I в корпусе tqfp-44
Цоколевка для LC4064V-10T44I (корпус tqfp-44). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для LC4064V-10T44I.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
LC4064V-10T44I подходит для 6 применениеs: Industrial Control and Sequencing, Peripheral Bus Interface Control, Data Acquisition Front-End, Communications Adapter Logic, LED Lighting Controller, Embedded System Glue Logic.
Industrial Control and Sequencing
The LC4064V-10T44I fits compact industrial control logic that coordinates sensors, actuators, interlocks, and operating-state sequences. Its 64 macrocells provide substantially more capacity than small PAL devices, while 30 user I/Os can connect discrete digital inputs and outputs without immediately moving to a larger FPGA. The 125 MHz speed grade supports deterministic control paths, and the industrial suffix identifies operation across -40°C to +105°C. Use the TQFP-44 footprint and program the nonvolatile configuration during production or maintenance. Verify every voltage domain and unused-pin treatment against the manufacturer datasheet before deploying the design in a safety- or mission-critical machine.
Рекомендуется
Peripheral Bus Interface Control
The LC4064V-10T44I is appropriate for bus arbitration, address decoding, protocol-state machines, and interface timing between a host processor and peripheral logic. With 64 macrocells and 30 I/Os, it can consolidate several small address-decoder and glue-logic sections into one nonvolatile CPLD. Its 125 MHz speed grade provides timing margin for synchronous control logic, while in-system programming allows board-level configuration or firmware-driven updates. Keep clock, programming, and I/O paths routed according to the manufacturer layout guidance. Confirm protocol timing, supported I/O standards, and supply requirements in the ispMACH 4000 family documentation.
Рекомендуется
Data Acquisition Front-End
The LC4064V-10T44I can implement channel selection, control-word generation, trigger routing, and status multiplexing around an external data converter. Its 30 available I/Os and 64 macrocells allow several acquisition functions to share a compact programmable controller instead of using multiple fixed PAL devices. The 125 MHz class timing supports high-rate control sequences, and the nonvolatile configuration preserves the acquisition layout across power cycles. Designers should use the device for digital control and arbitration rather than analog conversion itself. Validate acquisition timing against the converter interface, constrain clock paths, and check the 3.3 V supply tolerances before PCB release.
Рекомендуется
Communications Adapter Logic
The LC4064V-10T44I fits communications adapters that require protocol framing, byte stuffing, command parsing, flow control, or programmable signal conditioning. Its 64 macrocells and 30 I/Os allow a compact CPLD to coordinate a host interface with an external transceiver, while the 125 MHz speed grade supports higher-rate parallel logic. The 3.3 V operating supply aligns with many modern interface blocks, but each attached transceiver still requires its own voltage and signal-standard review. Use in-system programming to simplify board bring-up and field configuration. Keep sensitive interfaces away from noisy switching nodes and follow the manufacturer grounding and decoupling guidance.
Рекомендуется
LED Lighting Controller
The LC4064V-10T44I can control addressable LED sequencing, display refresh timing, fault flags, and user-interface state in lighting equipment. The 64 macrocells provide ample combinational and registered logic for multiple panels, while 30 I/Os support serial data, clock, enable, and diagnostic signals. Its 125 MHz class performance is more than sufficient for many LED-control functions and allows a single programmable device to consolidate discrete timing logic. The CPLD does not replace LED drivers, so use appropriate constant-current power stages downstream. Validate timing against the LED controller standard and account for switching-node noise in the PCB layout.
Рекомендуется
Embedded System Glue Logic
The LC4064V-10T44I is useful as glue logic between a microprocessor or microcontroller and custom peripherals, implementing chip selects, interrupt control, reset sequencing, latch functions, and communication multiplexers. Its 64 macrocells are useful when a system needs several fixed functions but not the capacity of an FPGA. The device operates from 3.3 V and offers 30 I/Os for peripheral connections, while the industrial temperature option supports wider environments. In-system programming reduces the need for separate configuration storage and enables board-level diagnostics. Confirm pin multiplexing, unused I/O behavior, and startup timing before using the CPLD in a critical reset path.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для LC4064V-10T44I — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LC4064V-10TN44I | LC4064C-10T44I | LC4032V-10T44I |
|---|---|---|---|---|
| Package | TQFP-44 | TQFP-44 | TQFP-44 | TQFP-44 |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Product Family | ispMACH 4000V | ispMACH 4000V | LC4064C | LC4032V |
| Macrocell Count | 64 macrocells | 64 macrocells | 64 macrocells | 32 macrocells |
| Operating Supply Voltage | 3.3 V | 3.3 V | 3.3 V / 2.5 V / 1.8 V | 3.3 V |
| Speed | 125 MHz | 125 MHz | 125 MHz | 125 MHz |
| Programming Method | In-System Programmable | In-System Programmable | In-System Programmable | In-System Programmable |
| Industrial Temperature Grade | I suffix; -40°C to +105°C | I suffix; -40°C to +105°C | I suffix; -40°C to +105°C | I suffix; -40°C to +105°C |
Ключевые отличия
- Provides the full 64-macrocell capacity in the target TQFP-44 configuration (против LC4032V-10T44I)
- Uses the ispMACH 4000V family architecture associated with the ispLSI 2000 and ispMACH 4A architectures (против LC4064C-10T44I)
- Provides the closest same-family 44-pin ordering-code alternative (против LC4064V-10TN44I)
Заметки по проектированию
Treat the TQFP-44 land pattern as a fixed replacement constraint. Before selecting an alternative, compare its package drawing, exposed-pad requirements, pin-1 orientation, and maximum lead temperature against the original board footprint. The LC4064V-10TN44I is the closest identified 44-pin candidate, while 48-pin and 100-pin family members cannot be installed without a PCB redesign.
Use the manufacturer-specified operating supply and decoupling arrangement for the selected device. The LC4064V-10T44I is identified as a 3.3 V part, while its family also supports 2.5 V and 1.8 V in-system programming. Separate core-supply and programming-voltage requirements in the schematic, and include sufficient local bypass capacitance to limit switching noise on the 3.3 V rail.
Keep the programming interface, clock inputs, and sensitive I/O paths away from noisy sources and route them for stable timing. Use the complete pin-description and layout guidance from the manufacturer datasheet because dedicated programming pins and unused I/O requirements cannot be inferred reliably from the package outline. Preserve a clear orientation marker on the assembled board to reduce the risk of reversed placement.
Do not treat the LC4064ZE-7TN48C or LC4064V-10TN100I as drop-in replacements merely because they belong to related product families; their 48-pin and 100-pin packages differ from the 44-pin target. Also verify the logic utilization of the 32-macrocell LC4032V-10T44I before selecting it. Validate programming voltage, timing constraints, unused-pin treatment, and thermal margin before releasing a replacement design.
Информация о соответствии
The retrieved product information identifies an industrial-temperature CPLD but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this exact ordering code.