Lattice Semiconductor

LC4064V-10T44I - 64-Macrocell 3.3V CPLD | Lattice

MPN: LC4064V-10T44I ✗ 停產
3.3 V Vdss TQFP-44 Package 125 MHz Speed
MOQ: 1 |

LC4064V-10T44I 概覽

Lattice Semiconductor LC4064V-10T44I is an ispMACH 4000V complex programmable logic device with 64 macrocells, 30 user I/Os, a 3.3 V operating supply, and a TQFP-44 package. It belongs to the SuperFAST high-density PLD family and combines the architectures used in the ispLSI 2000 and ispMACH 4A families. The device supports in-system programming for 3.3 V, 2.5 V, and 1.8 V operation.

A CPLD is a programmable logic device in the FPGA and CPLD hierarchy. Unlike a mask-programmed logic device, a CPLD retains its configuration in nonvolatile memory and can be reprogrammed during manufacturing, prototyping, or field updates. Its macrocell-based architecture provides deterministic combinational and registered logic implementation, making the LC4064V useful for control logic, interface translation, bus arbitration, and fixed-format signal processing.

The -10 speed designation identifies a 125 MHz-class device in the ispMACH 4000V family, while the T44 suffix denotes the 44-pin TQFP package and the I suffix identifies the industrial temperature grade. The family information identifies 64 macrocells and a 3.3 V supply, with 30 available I/Os. These characteristics make the LC4064V-10T44I appropriate for compact industrial, communications, control, and legacy system designs requiring nonvolatile reconfiguration.

The ispMACH 4000V architecture is intended for designs that need more logic density than small PAL devices without moving to a large FPGA. Its 125 MHz-class timing supports faster control paths than typical low-cost GAL and PAL logic. The TQFP-44 surface-mount package also provides a practical route for automated assembly and prototype fabrication where fine-pitch BGA packages would complicate inspection or rework.

Typical applications include industrial control interfaces, peripheral bus controllers, status and sequencing logic, data-acquisition front ends, communications adapters, and embedded system glue logic. The 30-I/O configuration allows the device to bridge multiple digital interfaces while the nonvolatile configuration simplifies repeatable production and field reconfiguration.

Board design must preserve the package footprint, programming interface, and supported I/O standards of the original LC4064V-10T44I. Verify signal voltage levels, unused pins, clock constraints, and programming voltage against the manufacturer datasheet. Because the exact pin names and complete electrical limits are not reproduced in the retrieved technical summaries, use the manufacturer pin-description table when assigning every package connection.

This product record combines the exact manufacturer-family specifications, lifecycle information, drop-in cross-reference findings, and practical selection guidance. It also distinguishes confirmed TQFP-44 replacements from larger-package devices that are not direct PCB drop-ins, helping engineers evaluate replacements without confusing electrical equivalence with physical compatibility.

直接替換替代品,適用於 LC4064V-10T44I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LC4064V-10T44I (相同外形與佔位) — 差異在於 Mounting Type, Package, Product Family, Speed Grade.

Lattice Semiconductor
Mounting Type: Surface mount
Product Family: ispMACH 4000B
比較對象 LC4064V-10T44I →
Lattice Semiconductor
Mounting Type: Surface mount
Package: 44-pin TQFP
Speed Grade: 10 ns
比較對象 LC4064V-10T44I →

LC4064V-10TN44I

✅ 直接替換
📦 TQFP-44
Same 64-macrocell, 3.3 V, 125 MHz class family and TQFP-44 footprint; ordering-code package details must be confirmed in the manufacturer datasheet

📋 參考替代品(不在目錄中)

LC4064C-10T44I

✅ 直接替換
Lattice Semiconductor
📦 TQFP-44
In-system-programmable complex programmable logic device (CPLD) · 64 macros · 10 ns · 3.3 V, 2.5 V, and 1.8 V · 44-pin TQFP · In-system programmable · SuperFAST high-density PLD · LC4064C

聯絡詢價

查看資料表 →

LC4032V-10T44I

✅ 直接替換
📦 TQFP-44
32 macrocells versus 64 macrocells, a 50% capacity reduction; the 10 speed grade and T44 package naming remain aligned

📋 參考替代品(不在目錄中)

LC4064V-10T44I 最大額定值與電氣特性

Device Type Complex Programmable Logic Device (CPLD)
Product Family ispMACH 4000V
Architecture Description Blend of ispLSI 2000 and ispMACH 4A architectures
Macrocell Count 64 macrocells
User I/O Count 30 I/Os
工作電源電壓 3.3 V
Supported Programming Voltages 3.3 V / 2.5 V / 1.8 V
Speed Grade 125 MHz
Speed Designator -10
Programmable Logic Type SuperFAST high-density PLD
Configuration Method In-System Programmable
封裝 TQFP-44
安裝類型 SMD/SMT
Industrial Temperature Range -40°C to +105°C
生命週期狀態 Discontinued

LC4064V-10T44I tqfp-44 腳位配置指南

LC4064V-10T44I(tqfp-44 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

LC4064V-10T44I 的 tqfp-44 封裝腳位圖

無詳細腳位定義資料: LC4064V-10T44I.

請參閱 資料表 以查看完整腳位配置。

典型應用

LC4064V-10T44I 適用於 6 應用s: Industrial Control and Sequencing, Peripheral Bus Interface Control, Data Acquisition Front-End, Communications Adapter Logic, LED Lighting Controller, Embedded System Glue Logic.

🏭

Industrial Control and Sequencing

The LC4064V-10T44I fits compact industrial control logic that coordinates sensors, actuators, interlocks, and operating-state sequences. Its 64 macrocells provide substantially more capacity than small PAL devices, while 30 user I/Os can connect discrete digital inputs and outputs without immediately moving to a larger FPGA. The 125 MHz speed grade supports deterministic control paths, and the industrial suffix identifies operation across -40°C to +105°C. Use the TQFP-44 footprint and program the nonvolatile configuration during production or maintenance. Verify every voltage domain and unused-pin treatment against the manufacturer datasheet before deploying the design in a safety- or mission-critical machine.

🔧

Peripheral Bus Interface Control

The LC4064V-10T44I is appropriate for bus arbitration, address decoding, protocol-state machines, and interface timing between a host processor and peripheral logic. With 64 macrocells and 30 I/Os, it can consolidate several small address-decoder and glue-logic sections into one nonvolatile CPLD. Its 125 MHz speed grade provides timing margin for synchronous control logic, while in-system programming allows board-level configuration or firmware-driven updates. Keep clock, programming, and I/O paths routed according to the manufacturer layout guidance. Confirm protocol timing, supported I/O standards, and supply requirements in the ispMACH 4000 family documentation.

📡

Data Acquisition Front-End

The LC4064V-10T44I can implement channel selection, control-word generation, trigger routing, and status multiplexing around an external data converter. Its 30 available I/Os and 64 macrocells allow several acquisition functions to share a compact programmable controller instead of using multiple fixed PAL devices. The 125 MHz class timing supports high-rate control sequences, and the nonvolatile configuration preserves the acquisition layout across power cycles. Designers should use the device for digital control and arbitration rather than analog conversion itself. Validate acquisition timing against the converter interface, constrain clock paths, and check the 3.3 V supply tolerances before PCB release.

🌐

Communications Adapter Logic

The LC4064V-10T44I fits communications adapters that require protocol framing, byte stuffing, command parsing, flow control, or programmable signal conditioning. Its 64 macrocells and 30 I/Os allow a compact CPLD to coordinate a host interface with an external transceiver, while the 125 MHz speed grade supports higher-rate parallel logic. The 3.3 V operating supply aligns with many modern interface blocks, but each attached transceiver still requires its own voltage and signal-standard review. Use in-system programming to simplify board bring-up and field configuration. Keep sensitive interfaces away from noisy switching nodes and follow the manufacturer grounding and decoupling guidance.

💡

LED Lighting Controller

The LC4064V-10T44I can control addressable LED sequencing, display refresh timing, fault flags, and user-interface state in lighting equipment. The 64 macrocells provide ample combinational and registered logic for multiple panels, while 30 I/Os support serial data, clock, enable, and diagnostic signals. Its 125 MHz class performance is more than sufficient for many LED-control functions and allows a single programmable device to consolidate discrete timing logic. The CPLD does not replace LED drivers, so use appropriate constant-current power stages downstream. Validate timing against the LED controller standard and account for switching-node noise in the PCB layout.

🖥️

Embedded System Glue Logic

The LC4064V-10T44I is useful as glue logic between a microprocessor or microcontroller and custom peripherals, implementing chip selects, interrupt control, reset sequencing, latch functions, and communication multiplexers. Its 64 macrocells are useful when a system needs several fixed functions but not the capacity of an FPGA. The device operates from 3.3 V and offers 30 I/Os for peripheral connections, while the industrial temperature option supports wider environments. In-system programming reduces the need for separate configuration storage and enables board-level diagnostics. Confirm pin multiplexing, unused I/O behavior, and startup timing before using the CPLD in a critical reset path.

What are the key specifications of LC4064V-10T44I that engineers should know?
The LC4064V-10T44I is a 64-macrocell, 30-I/O CPLD with a 3.3 V operating supply, 125 MHz speed grade, in-system programming, and a TQFP-44 package. According to the Lattice ispMACH 4000 family information, it combines the ispLSI 2000 and ispMACH 4A architectures. The I suffix denotes the industrial grade, whose identified operating range is -40°C to +105°C. It is suited to compact control, interface, and sequencing logic rather than designs requiring the capacity of a large FPGA.
Where can I download the LC4064V-10T44I datasheet PDF?
The LC4064V-10T44I datasheet PDF is available through the Lattice Semiconductor document listing linked on the retrieved product page. The technical summary identifies the device as an ispMACH 4000V SuperFAST high-density PLD supporting 3.3 V, 2.5 V, and 1.8 V in-system programming. Use the manufacturer document for the complete pin-description table, electrical characteristics, timing diagrams, programming instructions, and package drawings before finalizing a PCB design.
Where can I find the LC4064V-10T44I pinout?
The LC4064V-10T44I pinout is defined in the pin-description table of the Lattice ispMACH 4000 family datasheet. The device uses a 44-pin TQFP package, and its principal identified characteristics include 30 user I/Os. Assign signals from the datasheet rather than inferring unused or dedicated programming pins from a generic TQFP drawing. The retrieved product summaries do not provide a complete numbered pin list, so use the manufacturer diagram for every connection.
What can replace the LC4064V-10T44I?
The closest confirmed drop-in candidate is the Lattice LC4064V-10TN44I because it retains the TQFP-44 package and the 64-macrocell, 3.3 V, 125 MHz class configuration. The LC4064C-10T44I is another family-level substitute identified in the cross-reference search, while LC4032V-10T44I is a lower-density 32-macrocell option in the same TQFP-44 naming pattern. Confirm the LC4032V resource use and pin compatibility in the manufacturer datasheet before replacing an existing design.
Is LC4064V-10T44I the same as LC4064V-10TN44I?
The LC4064V-10T44I and LC4064V-10TN44I are both Lattice ispMACH 4000V devices identified with 64 macrocells, a 3.3 V supply, 125 MHz speed, and a TQFP-44 package. The additional N in the ordering code identifies a different package or ordering configuration within the family, so engineers should compare the package drawing and exact ordering information before treating them as interchangeable. The LC4064V-10TN44I is the stronger cross-reference candidate because its package is explicitly identified.
LC4064V-10T44I vs LC4032V-10T44I - which is better for a control design?
Choose the LC4064V-10T44I when the design may outgrow 32 macrocells; it has 64 macrocells, while the LC4032V-10T44I is the 32-macrocell member of the same 44-pin naming pattern. The LC4064V provides 50% more macrocell capacity, which can reduce logic partitioning or provide additional registers. Choose the LC4032V only after confirming that the existing logic fits and that its timing, pin assignments, and programming configuration remain acceptable.
When should I choose LC4064V-10T44I over a smaller GAL or PAL device?
Choose the LC4064V-10T44I when a design needs more than the limited capacity of a simple GAL or PAL and benefits from a nonvolatile, in-system-programmable CPLD. Its 64 macrocells and 30 I/Os provide substantially more design space than typical small legacy PLDs, while the TQFP-44 package remains inspectable and accessible for prototype assembly. Select the smaller device instead when the logic is simple, its I/O count is sufficient, and lower complexity is a primary design goal.
Is LC4064V-10T44I suitable for industrial control systems?
The LC4064V-10T44I is suitable for industrial control tasks requiring a 3.3 V CPLD, 64 macrocells, 30 I/Os, and an identified industrial temperature range of -40°C to +105°C. Its 125 MHz speed grade can support higher-speed sequencing and interface logic than basic PAL devices. Confirm signal levels, timing constraints, power requirements, and system qualification against the manufacturer datasheet for the final industrial design.
What is the best Lattice equivalent for LC4064V-10T44I?
The best same-brand candidate identified for a direct PCB migration is the Lattice LC4064V-10TN44I in the 44-pin TQFP family, with the same 64-macrocell and 3.3 V device class. The LC4064C-10T44I is another Lattice T44 family alternative, but its electrical limits and configuration compatibility should be checked before substitution. LC4064V-10TN100I and LC4064ZE-7TN48C are not direct drop-ins because their package pin counts differ from 44.
Where to buy LC4064V-10T44I online?
Use the Request a Quote form on this page to request the LC4064V-10T44I, current stock status, minimum order quantity, and delivery lead time. The device is listed as discontinued and still sourced, so a quotation is more appropriate than assuming regular production availability. Confirm the exact LC4064V-10T44I ordering code, condition, package, and quantity when submitting the request.
What is the price of LC4064V-10T44I?
The current commercial terms for LC4064V-10T44I are handled through the Request a Quote form on this page. The part is discontinued and remains sourced, so its historical catalog price should not be treated as a current quotation. Include the required quantity, target package, acceptable condition, and delivery location in the request to obtain a current response.
What is the lead time for LC4064V-10T44I?
The current lead time for LC4064V-10T44I depends on remaining supply and the requested quantity. Because the manufacturer-family listing identifies the product as discontinued and still sourced, request a firm lead time through the Request a Quote form on this page. State whether the requirement is prototype quantity or production volume so the supplier can confirm the appropriate sourcing schedule.
Is LC4064V-10T44I in stock?
Stock for LC4064V-10T44I should be confirmed through the Request a Quote form on this page rather than inferred from general catalog visibility. The product is listed as discontinued and still sourced, which means availability can vary with remaining inventory and order volume. The quote request should identify the exact TQFP-44 ordering code, acceptable condition, and required quantity.
How does in-system programming help the LC4064V-10T44I?
In-system programming lets the LC4064V-10T44I receive its logic configuration after it has been mounted on the board. The family supports 3.3 V, 2.5 V, and 1.8 V programming levels, which can simplify manufacturing, diagnostics, and field updates. The implementation still requires the correct programming interface, voltage levels, timing, and programmer settings specified by Lattice.
What programming tools are used with the LC4064V-10T44I?
The LC4064V-10T44I is programmed through the Lattice ispMACH 4000 device programming flow, with in-system programming supported at 3.3 V, 2.5 V, and 1.8 V. Use a programmer and cable compatible with the device family and configure the operating voltage, pin assignments, and JTAG or programming-chain arrangement according to the manufacturer programming documentation. The retrieved summaries do not identify a specific programmer model.

工程參考資料,適用於 LC4064V-10T44I — 比較、設計指引及合規資訊。

選型指南

Choose the original LC4064V-10T44I when an existing design requires the documented 64-macrocell, 30-I/O ispMACH 4000V implementation and its exact electrical, timing, and programming behavior. For a maintenance replacement, evaluate LC4064V-10TN44I first because it has the strongest confirmed combination of the same family, 64-macrocell capacity, 3.3 V supply, 125 MHz speed class, and TQFP-44 footprint. Consider LC4064C-10T44I when its architecture, voltage ratings, and configuration flow meet the design requirements. Use LC4032V-10T44I only after confirming that the design occupies no more than 32 macrocells and that every timing and pin requirement remains satisfied. Do not use the 48-pin or 100-pin alternatives without changing the PCB. Because the target is discontinued, preserve the original configuration file, programming settings, and schematic review records during any migration.

與替代品比較

參數 本產品 LC4064V-10TN44I LC4064C-10T44I LC4032V-10T44I
Package TQFP-44 TQFP-44 TQFP-44 TQFP-44
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Product Family ispMACH 4000V ispMACH 4000V LC4064C LC4032V
Macrocell Count 64 macrocells 64 macrocells 64 macrocells 32 macrocells
Operating Supply Voltage 3.3 V 3.3 V 3.3 V / 2.5 V / 1.8 V 3.3 V
Speed 125 MHz 125 MHz 125 MHz 125 MHz
Programming Method In-System Programmable In-System Programmable In-System Programmable In-System Programmable
Industrial Temperature Grade I suffix; -40°C to +105°C I suffix; -40°C to +105°C I suffix; -40°C to +105°C I suffix; -40°C to +105°C

主要差異化特點

  • Provides the full 64-macrocell capacity in the target TQFP-44 configuration (對比LC4032V-10T44I)
  • Uses the ispMACH 4000V family architecture associated with the ispLSI 2000 and ispMACH 4A architectures (對比LC4064C-10T44I)
  • Provides the closest same-family 44-pin ordering-code alternative (對比LC4064V-10TN44I)

設計說明

Treat the TQFP-44 land pattern as a fixed replacement constraint. Before selecting an alternative, compare its package drawing, exposed-pad requirements, pin-1 orientation, and maximum lead temperature against the original board footprint. The LC4064V-10TN44I is the closest identified 44-pin candidate, while 48-pin and 100-pin family members cannot be installed without a PCB redesign.

Use the manufacturer-specified operating supply and decoupling arrangement for the selected device. The LC4064V-10T44I is identified as a 3.3 V part, while its family also supports 2.5 V and 1.8 V in-system programming. Separate core-supply and programming-voltage requirements in the schematic, and include sufficient local bypass capacitance to limit switching noise on the 3.3 V rail.

Keep the programming interface, clock inputs, and sensitive I/O paths away from noisy sources and route them for stable timing. Use the complete pin-description and layout guidance from the manufacturer datasheet because dedicated programming pins and unused I/O requirements cannot be inferred reliably from the package outline. Preserve a clear orientation marker on the assembled board to reduce the risk of reversed placement.

Do not treat the LC4064ZE-7TN48C or LC4064V-10TN100I as drop-in replacements merely because they belong to related product families; their 48-pin and 100-pin packages differ from the 44-pin target. Also verify the logic utilization of the 32-macrocell LC4032V-10T44I before selecting it. Validate programming voltage, timing constraints, unused-pin treatment, and thermal margin before releasing a replacement design.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The retrieved product information identifies an industrial-temperature CPLD but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this exact ordering code.

相關搜尋

lc4064v datasheet LC4064V-10T44I datasheet LC4064V-10T44I pinout LC4064V-10T44I datasheet pdf LC4064V-10T44I equivalent LC4064V-10T44I replacement LC4064V-10T44I cross reference LC4064V-10T44I vs LC4032V-10T44I LC4064V-10T44I TQFP-44 footprint Lattice LC4064V-10T44I LC4064V-10T44I price LC4064V-10T44I stock 64 macrocell TQFP-44 CPLD LC4064V-10T44I industrial control LC4064V-10T44I programming

相關元件與詞彙

Lattice Semiconductor LC4064V-10T44I LC4064V-10TN44I LC4064C-10T44I LC4032V-10T44I ispMACH 4000V ispMACH 4A ispLSI 2000 CPLD Complex Programmable Logic Device FPGA and CPLD hierarchy macrocell user I/O in-system programming nonvolatile programmable logic SuperFAST high-density PLD TQFP-44 TQFP package family surface-mount package 3.3 V 2.5 V 1.8 V 125 MHz industrial control data acquisition
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情