LFE5U-45F-8BG256I - 44K LUT ECP5 FPGA, 256-BGA Industrial | Lattice
Артикул: LFE5U-45F-8BG256I ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $33.47 | $33,47 |
| 10 | $30.12 | $301,20 |
| 100 | $26.78 | $2.678,00 |
| 250 | $24.5 | $6.125,00 |
| 1.000 | $21.85 | $21.850,00 |
LFE5U-45F-8BG256I Обзор
An FPGA (Field Programmable Gate Array) is a semiconductor device whose logic function is defined by a user-programmed configuration bitstream rather than fixed at the fab. The LFE5U sits within the broader taxonomy: FPGA -> programmable logic -> logic IC -> integrated circuit -> semiconductor. FPGAs trade raw performance-per-watt for reconfigurability, making them ideal for evolving interfaces, parallel DSP pipelines, and glue logic that must adapt across product revisions. The ECP5 family in particular uses a 40 nm process and a LUT4-based fabric, optimizing logic density per mW versus prior Lattice generations.
Key specifications include 44,000 LUT4 elements distributed across the fabric, multiple 18 x 18 multipliers for fixed-point DSP, embedded block RAM, and SERDES-capable I/O structures on selected package options. The industrial temperature grade ("I" suffix) extends operation to -40C to +100C, well-suited for factory automation, automotive peripherals, and outdoor networking equipment. The 256-ball caBGA package (17 mm x 17 mm body, 1.0 mm ball pitch) is footprint-compatible with other ECP5 BG256 devices, simplifying PCB reuse across density grades.
Architecturally, the ECP5 fabric uses LUT4-based logic slices, sysDSP blocks for multiply-accumulate, and sysMEM EBR (Embedded Block RAM) for distributed memory. Bitstream configuration is loaded through SPI, JTAG (IEEE 1149.1 boundary-scan), or dual-boot/multi-boot modes, allowing field upgrades via TransFR (Transparent Field Reconfiguration) without halting downstream logic.
Typical applications include low-power video bridging (MIPI CSI-2 to parallel RGB), small-cell baseband signal processing, industrial motor control loops, sensor aggregation hubs, and as a companion logic device to higher-tier processors. Designers value the ECP5 series for its sub-1W active power and instant-on capability for sleep-to-active transitions in battery-powered IoT.
When designing with this FPGA, plan power-rail sequencing (1.1V core, 2.5V/3.3V auxiliary) and reserve decoupling capacitance per Lattice hardware design guidelines. Verify that JTAG and SPI flash footprints match the chosen configuration topology before layout commit; re-use is straightforward when migrating across ECP5 LUT densities within the same BG256 package.
This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для LFE5U-45F-8BG256I — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с LFE5U-45F-8BG256I (тот же форм-фактор и посадочное место) — отличается по Core Voltage, Family, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
LFE5U-45F-8BG256C
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LFE5U-25F-8BG256I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LFE5U-85F-8BG256I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LFE5U-12F-8BG256I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LFE5UM-45F-8BG256I
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LCMXO3LF-6900E-5MG256I
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$15.68 / шт.
Открыть даташит →LFE5U-45F-8BG256I Максимальные параметры и электрические характеристики
| Family | LatticeECP5 |
| Series | LFE5U |
| Logic Elements / LUTs (4-input) | 44000 LUTs (nominal) |
| Total Block RAM | 1944 Kbit (approx. 1,990,656 bits) |
| User I/O (this package) | 197 |
| Core Voltage | 1.1 V |
| Рабочая температура | -40C to +100C (Industrial) |
| Корпус | 256-LFBGA (caBGA, 17x17 mm, 1.0 mm pitch) |
| Тип монтажа | Surface Mount (BGA) |
| Process Node | 40 nm |
| Уровень MSL | 3 |
| Peak Reflow Temperature | 260 C |
| Time at Peak Reflow | 30 s |
| Terminal Finish | Tin-Silver-Copper (e1 per JESD-609) |
| Configuration Interface | JTAG (IEEE 1149.1), SPI, Dual-Boot / Multi-Boot |
| TransFR (Transparent Field Reconfiguration) | Supported |
| Boundary Scan | IEEE 1149.1 compliant |
| Статус RoHS | Compliant |
| Статус жизненного цикла | Active |
Руководство по цоколевке LFE5U-45F-8BG256I в корпусе 256-lfbga (cabga, 17x17 mm, 1.0 mm pitch)
Цоколевка для LFE5U-45F-8BG256I (корпус 256-lfbga (cabga, 17x17 mm, 1.0 mm pitch)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для LFE5U-45F-8BG256I.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
LFE5U-45F-8BG256I подходит для 7 применениеs: Embedded Video Bridge (MIPI CSI-2 to Parallel RGB), Industrial Motor Control and Drive Logic, Sensor Aggregation Hub for IoT Edge Devices, Small-Cell and Wireless Baseband Pre-Processing, LED Display and Lighting Control, Automotive Companion Logic and Interface Bridging, Test & Measurement Instrumentation Front-End.
Embedded Video Bridge (MIPI CSI-2 to Parallel RGB)
The LFE5U-45F-8BG256I is well-suited for embedded video bridging between MIPI CSI-2 image sensors and parallel RGB displays or processors. With 44000 LUTs and 197 user I/O, the device can absorb the lane-deserialization logic, pixel FIFOs, and timing-controller state machine in a single fabric, while the BG256 package provides enough balls for both the CSI-2 differential pairs and the parallel RGB data + sync pins. Designers typically instantiate soft CSI-2 RX IPs and soft video-timing controllers, achieving sub-100 mW active power and bypassing the need for an external bridge ASIC. Industrial temperature grade allows deployment in outdoor or vehicle-mounted camera systems.
Рекомендуется
Industrial Motor Control and Drive Logic
The LFE5U-45F-8BG256I delivers the determinism and parallel DSP capacity required for field-oriented control (FOC) loops driving 3-phase BLDC or PMSM motors. The fabric's 18x18 multipliers and embedded block RAM accelerate the Clarke/Park transforms, SVPWM generation, and PI controller arithmetic at PWM rates up to several hundred kHz. The 197 user I/O accommodate multi-axis encoder feedback (QEP), Hall sensors, and PWM outputs without external mux logic. The industrial -40C to +100C grade ensures stable operation across factory-floor thermal envelopes, while the caBGA package provides robust mechanical attachment for high-vibration mounting typical of industrial servo systems.
Рекомендуется
Sensor Aggregation Hub for IoT Edge Devices
The LFE5U-45F-8BG256I serves as a sensor aggregation hub in IoT edge devices, consolidating I2C/SPI/UART sensor buses, applying on-fabric pre-processing (filtering, thresholding, event detection), and forwarding only relevant data upstream to a host MCU or wireless module. The 1944 Kbit of embedded block RAM provides ample buffer space for time-stamping sensor bursts, while the 197 I/O accommodate 10+ sensor channels plus control GPIOs. Designers pair the ECP5 with a low-power host MCU, putting the ECP5 in sleep when sensor traffic is idle - the family's fast wake-up from 1.1V core makes it ideal for duty-cycled battery-powered sensor nodes.
Рекомендуется
Small-Cell and Wireless Baseband Pre-Processing
The LFE5U-45F-8BG256I is deployed in small-cell baseband pre-processing, where it handles front-end sample-rate conversion, channel filtering, and crest-factor reduction before the data is forwarded to a host processor. The fabric's high-speed I/O structures support LVDS-based ADC interfaces at hundreds of MSPS, while the embedded multipliers accelerate polyphase filter banks. Industrial temperature grade and low sub-watt active power make it suitable for pico-cell and femto-cell deployments where thermal envelope is constrained.
Рекомендуется
LED Display and Lighting Control
The LFE5U-45F-8BG256I drives large LED wall and architectural lighting installations, where each output channel controls PWM dimming for thousands of LEDs. The high I/O count (197 pins) accommodates long data chains with minimum external mux logic, while the 44000 LUTs handle per-channel gamma correction, color-space conversion, and frame buffering in embedded block RAM. The industrial temperature grade supports outdoor facade lighting and stage-rig deployments where ambient temperatures swing widely.
Рекомендуется
Automotive Companion Logic and Interface Bridging
The LFE5U-45F-8BG256I serves as automotive companion logic in infotainment and ADAS subsystems, bridging between automotive SerDes links, Ethernet PHYs, and the host SoC. The fabric's high I/O density supports multiple CAN-FD or FlexRay interfaces alongside LVDS display links, while the LUT4 fabric implements custom protocol translation glue logic. Industrial temperature grade is appropriate for cabin electronics; for under-hood or powertrain applications designers should verify the specific Lattice Q-grade part numbering.
Рекомендуется
Test & Measurement Instrumentation Front-End
The LFE5U-45F-8BG256I is well-suited for test-and-measurement front-end signal conditioning, providing custom triggering, count-and-time logic, and protocol-aware pattern generation. The 197 I/O accommodate multi-standard digital I/O banks (LVCMOS 1.2V to 3.3V), while the multipliers implement on-sine FFT pre-stages that offload the host processor. The caBGB package supports high-density bench-instrument PCB layouts.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для LFE5U-45F-8BG256I — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LFE5U-45F-8BG256C | LFE5U-25F-8BG256I | LFE5U-85F-8BG256I | LFE5U-12F-8BG256I | LFE5UM-45F-8BG256I |
|---|---|---|---|---|---|---|
| Package | 256-LFBGA (caBGA, 17x17 mm) | 256-LFBGA (caBGA) - same | 256-LFBGA (caBGA) - same | 256-LFBGA (caBGA) - same | 256-LFBGA (caBGA) - same | 256-LFBGA (caBGA) - same |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| LUTs (4-input) | 44,000 | 44,000 - same | 25,000 (-43%) | 84,000 (+91%) | 12,000 (-73%) | 44,000 - same |
| Operating Temperature | -40C to +100C (Industrial) | 0C to +85C (Commercial) | -40C to +100C (Industrial) | -40C to +100C (Industrial) | -40C to +100C (Industrial) | -40C to +100C (Industrial) |
| Core Voltage | 1.1 V | 1.1 V - same | 1.1 V - same | 1.1 V - same | 1.1 V - same | 1.1 V - same |
| Family | ECP5 (LFE5U) | ECP5 (LFE5U) | ECP5 (LFE5U) | ECP5 (LFE5U) | ECP5 (LFE5U) | ECP5-5G (LFE5UM) |
| Embedded Block RAM | 1944 Kbit | 1944 Kbit - same | 1086 Kbit (-44%) | 3840 Kbit (+97%) | 756 Kbit (-61%) | 1944 Kbit - same |
Ключевые отличия
- Mid-density 44K LUT sweet spot in the ECP5 family (против LFE5U-25F-8BG256I (25K LUTs))
- Industrial temperature grade vs commercial (против LFE5U-45F-8BG256C (Commercial))
- Lower power than higher-density ECP5 parts (против LFE5U-85F-8BG256I (84K LUTs))
- Upward-compatible with ECP5-5G SERDES variant (против LFE5UM-45F-8BG256I)
Заметки по проектированию
The LFE5U-45F-8BG256I requires three power rails: 1.1V core (VCC), 2.5V or 3.3V auxiliary (VCCAUX/VCCIO), and a separate VCCIO for each I/O bank. Per the LatticeECP5 hardware design guide, place at least one 10uF bulk + four 0.1uF decoupling caps per supply pin group; keep trace lengths under 5 mm. Power sequencing matters: VCCAUX/VCCIO must ramp before or simultaneously with VCC to avoid I/O latch-up. For battery-powered designs, leverage the ECP5 sleep mode (<5 mW) and instant-on wake-up for duty-cycled operation.
In the 256-LFBGA (caBGA) package, the thermal pad on the bottom of the BGA must be soldered to a thermally-connected copper pour on the PCB to dissipate the FPGA's active power (typically 0.5-1W active). Lattice recommends a minimum 4-layer PCB stack-up with at least 1 square inch of unbroken ground copper under the BGA to keep junction temperature below 100C. In industrial enclosures without forced airflow, derate the operating frequency or reduce logic utilization if junction temperature approaches the 100C industrial limit.
BG256 (1.0 mm ball pitch) requires high-quality PCB fab with microvia stack-ups and ENIG or immersion-silver surface finish for reliable BGA soldering. Break out the inner balls using vias-in-pad with filled-and-capped plating, or use dog-bone fanouts if PCB cost is constrained. Match differential-pair length within 5 mils for SERDES-capable balls (if migrating to LFE5UM-45F-8BG256I variant). Verify the chosen PCB house's BGA pitch process (most handle 1.0 mm pitch; 0.8 mm pitch requires advanced fab).
The LFE5U-45F-8BG256I supports JTAG (IEEE 1149.1), SPI, and dual-boot/multi-boot configuration with TransFR (Transparent Field Reconfiguration). For production programming, place a footprint for a SPI flash (e.g., 16 Mbit Winbond or Macronix) adjacent to the BGA and route the SPI signals with length matching. JTAG should be brought out to a 2x5 1.27 mm header for factory programming and boundary-scan testing.
Common pitfalls when designing with the LFE5U-45F-8BG256I include: (1) forgetting to connect unused I/O banks to a valid VCCIO - per Lattice, all VCCIO pins must be powered even if the bank has no I/O; (2) exceeding the 197-user-I/O ball count when assigning pins (use Lattice Diamond PinPlanner to verify); (3) assuming pinout compatibility with ECP5-5G (LFE5UM) - the SERDES balls differ in function; (4) using a non-Lattice SPI flash that does not support the dual-boot bitstream format.
Информация о соответствии
RoHS compliant per Lattice product page; e1 (Tin-Silver-Copper) terminal finish per JESD-609; MSL-3 floor life 168 hours. AEC-Q100 not applicable for this industrial-grade (non-automotive-qualified) Lattice part number.
