LM224DR2 - Quad 3-32V Operational Amplifier | onsemi
Артикул: LM224DR2 ✓ АктивенLM224DR2 Обзор
An operational amplifier is a voltage-gain element that compares its differential input voltage and drives its output to represent the amplified difference between those inputs. Within the amplifier-IC hierarchy, the LM224DR2 is a quad operational amplifier, meaning four independent amplifier channels share one package. This integration reduces board area while retaining separate inputs and outputs for instrumentation, buffering, filtering, and closed-loop control functions.
The principal operating characteristics are a 3 V to 32 V single-supply range, four amplifier channels, true differential input capability, and a 14-pin SOIC package. The quad organization allows one package to implement a multi-stage signal path or several independent control channels. Its wide supply range also permits operation from common industrial rails, although the circuit must retain the voltage headroom required by the selected feedback network and load.
The LM224 series architecture is based on internally compensated, high-gain amplifier stages. Internal frequency compensation removes the need for an external compensation capacitor in the standard closed-loop configurations. True differential inputs support direct sensing of a sensor or bridge signal, while the broad supply range supports both single-rail and split-supply arrangements when the total supply span and common-mode limits are satisfied.
Typical uses include temperature and pressure sensor conditioning, current-loop receivers, industrial process-control loops, low-level signal buffers, active filters, and general-purpose instrumentation. The four channels can process related signals in one package or provide independent gain stages. When the source impedance is high, input-bias-current effects must be considered, and when driving a capacitive load, stability should be checked with the load and output-network configuration included in the analysis.
For robust PCB implementation, place the device on a stable analog ground plane, keep input and feedback traces short, and avoid routing sensitive input nodes beneath switching nodes or high-current return paths. Bypass the supply pins locally with the capacitance recommended by the manufacturer datasheet. When replacing LM224DR2 on an existing board, verify the SOIC-14 footprint, pin orientation, supply limits, input common-mode range, output swing, and required output current before finalizing the substitution.
This product page combines the verified manufacturer and distributor information for LM224DR2 with application guidance, package details, design considerations, and technically constrained drop-in comparisons. It is intended to help engineers identify the correct amplifier family, verify footprint compatibility, and evaluate whether an alternative meets the electrical and temperature requirements of the target circuit.
Аналоги без доработки для LM224DR2 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с LM224DR2 (тот же форм-фактор и посадочное место) — отличается по Operating Temperature Range, Package, Product Type.
LM224DR
✅ Прямая замена✓ В наличии
$0.1641 / шт.
Открыть даташит →LM324AM
✅ Прямая заменаУточнить цену
Открыть даташит →LM224DR2 Максимальные параметры и электрические характеристики
| Product Type | Quad operational amplifier |
| Number of Amplifier Channels | 4 channels |
| Supply Voltage Range | 3 V to 32 V |
| Supported Supply Configuration | Single supply or split supply |
| Input Type | True differential input |
| Frequency Compensation | Internally frequency compensated |
| Signal Gain | High gain |
| Package Type | 14-pin SOIC |
| Total Pin Count | 14 pins |
| Тип монтажа | Surface mount |
| Диапазон рабочих температур | -40 °C to +85 °C |
| Power Consumption | Low power |
| Amplifier Class | General-purpose amplifier |
Конфигурация выводов LM224DR2
| Контакт 1 | OUT1 — Amplifier 1 output |
| Контакт 2 | IN1- — Amplifier 1 inverting input |
| Контакт 3 | IN1+ — Amplifier 1 non-inverting input |
| Контакт 4 | GND — Ground connection |
| Контакт 5 | IN2+ — Amplifier 2 non-inverting input |
| Контакт 6 | IN2- — Amplifier 2 inverting input |
| Контакт 7 | OUT2 — Amplifier 2 output |
| Контакт 8 | OUT3 — Amplifier 3 output |
| Контакт 9 | IN3- — Amplifier 3 inverting input |
| Контакт 10 | IN3+ — Amplifier 3 non-inverting input |
| Контакт 11 | GND — Ground connection |
| Контакт 12 | IN4+ — Amplifier 4 non-inverting input |
| Контакт 13 | IN4- — Amplifier 4 inverting input |
| Контакт 14 | OUT4 — Amplifier 4 output |
Типичное применение
LM224DR2 подходит для 6 применениеs: Industrial Sensor Signal Conditioning, Temperature Measurement Loops, Active Low-Pass Filters, Current-to-Voltage Conversion, Control-System Signal Buffering, Test and Measurement Instrumentation.
Industrial Sensor Signal Conditioning
The LM224DR2 fits four-channel sensor conditioning because it provides true differential inputs, internally compensated amplifiers, and a 3 V to 32 V supply range. Two channels can amplify or filter a differential sensor signal while the remaining channels provide excitation buffering or reference conditioning. The 14-pin SOIC keeps the four channels compact, but each signal path must remain within the input common-mode range and achieve the required output swing. For bridge or transducer interfaces, verify input bias current, source impedance, gain error, and the sensor’s ground reference before finalizing resistor values.
Рекомендуется
Temperature Measurement Loops
The LM224DR2 is suitable for temperature and other slow-moving process signals because four independent channels can handle measurement, amplification, filtering, and output stages in one package. Its 3 V to 32 V operating range accommodates low-voltage sensor systems and industrial control rails, while true differential inputs help reject common-mode voltage on the sensor line. A practical design commonly uses one channel for gain, another for an active low-pass filter, and the remaining channels for offset or reference functions. Verify the sensor resistance, amplifier input bias current, allowed accuracy, and ambient temperature before selecting the external resistor network.
Рекомендуется
Active Low-Pass Filters
The LM224DR2 can implement active filters because its four internally frequency-compensated channels support buffered signal conditioning in the same 14-pin SOIC. A two-channel section can form a second-order low-pass filter, while the other channels can provide input and output buffering. The 3 V to 32 V supply capability provides flexibility for both low-voltage instrumentation and industrial rails. Since external resistors and capacitors determine the actual pole and gain, calculate component tolerances and verify the closed-loop response rather than relying on the amplifier’s nominal gain alone. Keep the filter node layout compact to reduce parasitic feedback and sensitivity to board leakage.
Рекомендуется
Current-to-Voltage Conversion
The LM224DR2 fits current-to-voltage conversion when a transducer produces a small current that must be converted into a measurable voltage. A precision resistor can establish the conversion gain, while the amplifier provides low-impedance signal handling and true differential input capability. The 3 V to 32 V range permits operation across compact sensor systems and industrial control supplies. The practical limitation is the amplifier’s offset and bias-current contribution relative to the smallest measured current. Use low-leakage board materials, keep high-impedance summing nodes away from humidity and contamination, and verify the required transimpedance gain and output compliance across the full operating range.
Рекомендуется
Control-System Signal Buffering
The LM224DR2 can buffer four related control signals where isolation between source and destination impedances is required. The quad organization supports one channel for a command signal, one for a feedback condition, and two for auxiliary functions, while the 3 V to 32 V supply range accommodates conventional industrial control voltages. Because each channel is independent, the same device can serve separate control blocks without cross-channel coupling. During design, check output current, capacitive-load stability, output swing, and the command-signal bandwidth. Short feedback connections and a quiet ground plane help preserve the benefit of buffering rather than introducing new noise or oscillation.
Рекомендуется
Test and Measurement Instrumentation
The LM224DR2 is useful in general-purpose test equipment where several low-level signals require buffering or gain stages on a common board. Its four true-differential channels can reduce the number of separate amplifier packages, while the 3 V to 32 V range supports both compact laboratory interfaces and industrial test fixtures. The device is particularly useful for input conditioning before measurement or conversion stages, provided channel bandwidth and output-swing requirements are satisfied. Use short traces, dedicated return paths, and stable reference grounding to avoid turning the input stage into an antenna. Final calibration should include offset, gain, and temperature effects expected over the measurement range.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для LM224DR2 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LM224DR | LM324AM |
|---|---|---|---|
| Brand | onsemi | Texas Instruments | Texas Instruments |
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| Amplifier Channels | 4 channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 32 V | 3 V to 32 V | 3 V to 32 V |
| Input Type | True differential input | True differential input | True differential input |
| Frequency Compensation | Internally frequency compensated | Internally frequency compensated | Internally frequency compensated |
| Supported Supply Configuration | Single supply or split supply | Single supply or split supply | Single supply or split supply |
| Mounting Type | Surface mount | Surface mount | Surface mount |
| Primary Product Class | General-purpose operational amplifier | General-purpose operational amplifier | General-purpose operational amplifier |
Ключевые отличия
- Broader industrial temperature coverage than the commercial LM324AM option (против LM324AM)
- Directly matches the LM224 family supply and package configuration (против LM224DR)
- Four independent channels reduce package count (против LM224DR)
Заметки по проектированию
Route each differential input pair as a closely coupled signal path and keep it away from switching nodes, inductors, and high-current supply returns. Place the bypass capacitor immediately across the amplifier supply pins and connect it to the quiet ground reference through the shortest practical path. The dual ground pins provide connection flexibility, but both must be connected to a continuous, low-impedance ground plane for reliable operation.
Do not assume that any quad op amp in a 14-pin SOIC is interchangeable solely because the footprint matches. Verify amplifier-channel pin assignments, input polarity, supply range, common-mode range, output swing, and operating temperature. The LM224DR and LM324AM use the familiar quad-op-amp arrangement, but temperature grade and application-level limits can still determine whether a substitution is electrically acceptable.
Keep feedback resistors and high-value input resistors close to their associated amplifier pins, and avoid creating long traces around sensitive summing nodes. For source impedances that are large relative to the amplifier input characteristics, account for bias-current-induced offset. When filtering or driving capacitive loads, verify phase margin with the actual resistor, capacitor, load, and PCB parasitics included.
Информация о соответствии
The onsemi LM224 family is a general-purpose industrial operational amplifier rather than an automotive-qualified AEC-Q100 device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the referenced product descriptions and require confirmation from onsemi.