onsemi

LM224DR2 - Quad 3-32V Operational Amplifier | onsemi

MPN: LM224DR2 ✓ فعال
3 V to 32 V Vdss 14-pin SOIC Package Internally frequency compensated Speed
MOQ: 1 |

LM224DR2 جائزہ

onsemi LM224DR2 is a four-channel, general-purpose operational amplifier designed for single-supply operation from 3 V to 32 V. The device uses true differential inputs and internally frequency-compensated amplifiers, with four amplifiers contained in a 14-pin SOIC package. It belongs to the LM224 family of low-cost quad operational amplifiers for industrial signal-conditioning and control systems.

An operational amplifier is a voltage-gain element that compares its differential input voltage and drives its output to represent the amplified difference between those inputs. Within the amplifier-IC hierarchy, the LM224DR2 is a quad operational amplifier, meaning four independent amplifier channels share one package. This integration reduces board area while retaining separate inputs and outputs for instrumentation, buffering, filtering, and closed-loop control functions.

The principal operating characteristics are a 3 V to 32 V single-supply range, four amplifier channels, true differential input capability, and a 14-pin SOIC package. The quad organization allows one package to implement a multi-stage signal path or several independent control channels. Its wide supply range also permits operation from common industrial rails, although the circuit must retain the voltage headroom required by the selected feedback network and load.

The LM224 series architecture is based on internally compensated, high-gain amplifier stages. Internal frequency compensation removes the need for an external compensation capacitor in the standard closed-loop configurations. True differential inputs support direct sensing of a sensor or bridge signal, while the broad supply range supports both single-rail and split-supply arrangements when the total supply span and common-mode limits are satisfied.

Typical uses include temperature and pressure sensor conditioning, current-loop receivers, industrial process-control loops, low-level signal buffers, active filters, and general-purpose instrumentation. The four channels can process related signals in one package or provide independent gain stages. When the source impedance is high, input-bias-current effects must be considered, and when driving a capacitive load, stability should be checked with the load and output-network configuration included in the analysis.

For robust PCB implementation, place the device on a stable analog ground plane, keep input and feedback traces short, and avoid routing sensitive input nodes beneath switching nodes or high-current return paths. Bypass the supply pins locally with the capacitance recommended by the manufacturer datasheet. When replacing LM224DR2 on an existing board, verify the SOIC-14 footprint, pin orientation, supply limits, input common-mode range, output swing, and required output current before finalizing the substitution.

This product page combines the verified manufacturer and distributor information for LM224DR2 with application guidance, package details, design considerations, and technically constrained drop-in comparisons. It is intended to help engineers identify the correct amplifier family, verify footprint compatibility, and evaluate whether an alternative meets the electrical and temperature requirements of the target circuit.

کے لیے ڈراپ اِن متبادل LM224DR2 — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM224DR2 (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Operating Temperature Range, Package, Product Type.

Texas Instruments
Package: 14-SOIC
Product Type: Standard general-purpose operational amplifier
موازنہ کریں LM224DR2 →
Texas Instruments
Operating Temperature Range: 0 °C to 70 °C
Package: 14-pin SOIC
موازنہ کریں LM224DR2 →

LM224DR

✅ ڈراپ-اِن
Texas Instruments
📦 14-pin SOIC
Standard general-purpose operational amplifier · 4 circuits · 14-SOIC · Surface mount

✓ اسٹاک میں

$0.1641 / یونٹ

ڈیٹا شیٹ دیکھیں →

LM324AM

✅ ڈراپ-اِن
Texas Instruments
📦 14-pin SOIC
General-purpose operational amplifier · 4 channels · 3 V to 32 V · 40 mA · 65 dB · 14-pin SOIC · Surface mount · 0 °C to 70 °C

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

LM224DR2 زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type Quad operational amplifier
Number of Amplifier Channels 4 channels
Supply Voltage Range 3 V to 32 V
Supported Supply Configuration Single supply or split supply
Input Type True differential input
Frequency Compensation Internally frequency compensated
Signal Gain High gain
Package Type 14-pin SOIC
Total Pin Count 14 pins
ماؤنٹنگ ٹائپ Surface mount
آپریٹنگ درجہ حرارت رینج -40 °C to +85 °C
Power Consumption Low power
Amplifier Class General-purpose amplifier

LM224DR2 پن کنفیگریشن

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
پن 1 OUT1 — Amplifier 1 output
پن 2 IN1- — Amplifier 1 inverting input
پن 3 IN1+ — Amplifier 1 non-inverting input
پن 4 GND — Ground connection
پن 5 IN2+ — Amplifier 2 non-inverting input
پن 6 IN2- — Amplifier 2 inverting input
پن 7 OUT2 — Amplifier 2 output
پن 8 OUT3 — Amplifier 3 output
پن 9 IN3- — Amplifier 3 inverting input
پن 10 IN3+ — Amplifier 3 non-inverting input
پن 11 GND — Ground connection
پن 12 IN4+ — Amplifier 4 non-inverting input
پن 13 IN4- — Amplifier 4 inverting input
پن 14 OUT4 — Amplifier 4 output

عام استعمالات

LM224DR2 کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Sensor Signal Conditioning, Temperature Measurement Loops, Active Low-Pass Filters, Current-to-Voltage Conversion, Control-System Signal Buffering, Test and Measurement Instrumentation.

🏭

Industrial Sensor Signal Conditioning

The LM224DR2 fits four-channel sensor conditioning because it provides true differential inputs, internally compensated amplifiers, and a 3 V to 32 V supply range. Two channels can amplify or filter a differential sensor signal while the remaining channels provide excitation buffering or reference conditioning. The 14-pin SOIC keeps the four channels compact, but each signal path must remain within the input common-mode range and achieve the required output swing. For bridge or transducer interfaces, verify input bias current, source impedance, gain error, and the sensor’s ground reference before finalizing resistor values.

🌡️

Temperature Measurement Loops

The LM224DR2 is suitable for temperature and other slow-moving process signals because four independent channels can handle measurement, amplification, filtering, and output stages in one package. Its 3 V to 32 V operating range accommodates low-voltage sensor systems and industrial control rails, while true differential inputs help reject common-mode voltage on the sensor line. A practical design commonly uses one channel for gain, another for an active low-pass filter, and the remaining channels for offset or reference functions. Verify the sensor resistance, amplifier input bias current, allowed accuracy, and ambient temperature before selecting the external resistor network.

📡

Active Low-Pass Filters

The LM224DR2 can implement active filters because its four internally frequency-compensated channels support buffered signal conditioning in the same 14-pin SOIC. A two-channel section can form a second-order low-pass filter, while the other channels can provide input and output buffering. The 3 V to 32 V supply capability provides flexibility for both low-voltage instrumentation and industrial rails. Since external resistors and capacitors determine the actual pole and gain, calculate component tolerances and verify the closed-loop response rather than relying on the amplifier’s nominal gain alone. Keep the filter node layout compact to reduce parasitic feedback and sensitivity to board leakage.

⚡

Current-to-Voltage Conversion

The LM224DR2 fits current-to-voltage conversion when a transducer produces a small current that must be converted into a measurable voltage. A precision resistor can establish the conversion gain, while the amplifier provides low-impedance signal handling and true differential input capability. The 3 V to 32 V range permits operation across compact sensor systems and industrial control supplies. The practical limitation is the amplifier’s offset and bias-current contribution relative to the smallest measured current. Use low-leakage board materials, keep high-impedance summing nodes away from humidity and contamination, and verify the required transimpedance gain and output compliance across the full operating range.

🔧

Control-System Signal Buffering

The LM224DR2 can buffer four related control signals where isolation between source and destination impedances is required. The quad organization supports one channel for a command signal, one for a feedback condition, and two for auxiliary functions, while the 3 V to 32 V supply range accommodates conventional industrial control voltages. Because each channel is independent, the same device can serve separate control blocks without cross-channel coupling. During design, check output current, capacitive-load stability, output swing, and the command-signal bandwidth. Short feedback connections and a quiet ground plane help preserve the benefit of buffering rather than introducing new noise or oscillation.

🖥️

Test and Measurement Instrumentation

The LM224DR2 is useful in general-purpose test equipment where several low-level signals require buffering or gain stages on a common board. Its four true-differential channels can reduce the number of separate amplifier packages, while the 3 V to 32 V range supports both compact laboratory interfaces and industrial test fixtures. The device is particularly useful for input conditioning before measurement or conversion stages, provided channel bandwidth and output-swing requirements are satisfied. Use short traces, dedicated return paths, and stable reference grounding to avoid turning the input stage into an antenna. Final calibration should include offset, gain, and temperature effects expected over the measurement range.

What is the LM224DR2?
The onsemi LM224DR2 is a four-channel general-purpose operational amplifier with true differential inputs, internally frequency-compensated stages, and operation from a 3 V to 32 V single supply. According to the onsemi LM224 datasheet, it is packaged in a 14-pin SOIC and is designed for low-cost signal-conditioning, buffering, filtering, and control applications.
What is the operating voltage range of LM224DR2?
The LM224DR2 operates from 3 V to 32 V when powered by a single supply. The onsemi LM224 datasheet also describes operation from split supplies, subject to the permitted total supply voltage and input common-mode requirements. Designers should verify the output swing at their chosen load before using the amplifier near either supply rail.
Where can I download the LM224DR2 datasheet PDF?
The LM224DR2 datasheet PDF is available from the onsemi product documentation at https://www.onsemi.com/pdf/datasheet/lm224-d.pdf. It documents the four-channel amplifier configuration, 3 V to 32 V supply range, electrical characteristics, pin assignments, typical application circuits, and ordering information for the LM224 family.
Where can I find the LM224DR2 pinout?
The LM224DR2 pinout is defined by the 14-pin SOIC drawing in the onsemi LM224 datasheet. Four amplifier sections are provided: each channel has one non-inverting input, one inverting input, and one output, while pins 4 and 11 are ground. Use the datasheet pin-description table when assigning PCB tracks or testing a replacement board.
What are the key specifications of LM224DR2 that engineers should know?
The main LM224DR2 specifications are four independent amplifier channels, a 3 V to 32 V supply range, true differential inputs, internal frequency compensation, and a 14-pin SOIC package. According to the onsemi LM224 datasheet, the device is intended for low-cost, low-power general-purpose applications and can operate from either a single or split supply.
What can replace the LM224DR2?
A suitable LM224DR2 replacement must use the same 14-pin SOIC footprint and provide the same amplifier-channel assignments, supply range, and input functions. The Texas Instruments LM224DR is the closest listed pin-compatible option because it uses the same 14-SOIC quad-amplifier arrangement. Confirm temperature grade, electrical limits, and sourcing requirements before substitution.
Is the LM224DR2 the same as the LM224DR?
The LM224DR2 and LM224DR describe closely related 14-pin SOIC versions of the LM224 quad operational amplifier, but the complete ordering code must be checked before interchangeability is assumed. Both use the same 3 V to 32 V operating family and four-channel SOIC arrangement; verify the exact suffix, temperature grade, reel configuration, and manufacturer requirements.
LM224DR2 vs LM324AM — which is better for industrial control?
The LM224DR2 is generally the better choice for industrial control when the required ambient range includes temperatures below 0 °C. The LM224 operates from -40 °C to +85 °C, while the LM324AM is identified as the commercial-grade member and is normally specified for 0 °C to +70 °C. Both provide a pin-compatible 14-pin SOIC quad-amplifier arrangement for standard LM324-family circuits.
When should I choose LM224DR2 over LM324AM?
Choose the LM224DR2 when the circuit must operate across cold industrial conditions that fall outside the LM324AM commercial temperature range. The LM224DR2 is specified from -40 °C to +85 °C, providing 40 °C more cold-range margin than a 0 °C commercial-grade lower limit. For ordinary room-temperature designs, confirm all other electrical requirements before choosing between the families.
Is LM224DR2 suitable for sensor signal conditioning?
Yes, the LM224DR2 is suitable for many sensor-conditioning applications because it provides four true-differential amplifier channels and supports a 3 V to 32 V supply range. It can implement non-inverting and inverting gains, active filters, and sensor amplifiers, provided the input common-mode voltage, output swing, source impedance, and precision requirements are checked for the specific sensor.
Where to buy LM224DR2 online?
Use the Request a Quote form on this page to ask for LM224DR2 availability, current lead time, and an order quote. The onsemi LM224DR2 is a 14-SOIC quad operational amplifier intended for general-purpose industrial signal processing. The form allows the requested quantity and delivery requirements to be included in the sourcing request.
What is the price of LM224DR2?
Current LM224DR2 commercial terms are handled through the Request a Quote form on this page. Submit the required quantity, package suffix, shipment destination, and target schedule for an up-to-date quotation. This avoids presenting a stale price and allows stock, traceability, and delivery options to be evaluated together.
What is the lead time for LM224DR2?
The current lead time for LM224DR2 should be confirmed through the Request a Quote form on this page. Include the required quantity and delivery date so the order can be evaluated against current inventory and production scheduling. Because lead time can vary with quantity and market conditions, avoid relying on an unconfirmed generic schedule.
Is LM224DR2 in stock?
LM224DR2 stock status can be requested through the Request a Quote form on this page. State the exact MPN, desired quantity, and shipment destination so current inventory can be matched to the order. For production builds, also request any required date code, traceability, and inspection documentation.
What is the best Texas Instruments equivalent for LM224DR2?
The Texas Instruments LM224DR is the closest directly listed equivalent because it uses the same 14-pin SOIC quad-operational-amplifier arrangement and the same 3 V to 32 V supply family. According to the onsemi and Texas Instruments device descriptions, it is designed for single- or split-supply operation. Review pin functions and electrical limits in each manufacturer datasheet before production substitution.
Does LM224DR2 need external frequency compensation?
The LM224DR2 uses internally frequency-compensated amplifier stages, so the standard closed-loop configurations do not require an external compensation capacitor. According to the onsemi LM224 datasheet, the amplifier is designed for general-purpose operation with true differential inputs. Additional compensation or filtering should only be added after stability and noise requirements are evaluated.

کے لیے انجینئرنگ ریفرنس ڈیٹا LM224DR2 — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the LM224DR2 for four-channel industrial signal conditioning when the design requires true differential inputs, a 3 V to 32 V supply range, and operation from -40 °C to +85 °C. Its four integrated channels suit sensor interfaces, active filters, buffering, and process-control functions. The Texas Instruments LM224DR is the preferred drop-in alternative when its complete electrical ratings and ordering code satisfy the circuit, because it retains the same 14-pin SOIC quad-amplifier arrangement and supply range. Select the LM324AM only when commercial-grade temperature limits are acceptable; it offers the same familiar 14-SOIC quad topology and 3 V to 32 V supply family but does not provide the LM224’s cold-temperature margin. Before approving any substitution, verify exact pin functions, input common-mode limits, output swing, offset, bandwidth, load capability, and environmental requirements in the manufacturer datasheet.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ LM224DR LM324AM
Brand onsemi Texas Instruments Texas Instruments
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC
Amplifier Channels 4 channels 4 channels 4 channels
Supply Voltage Range 3 V to 32 V 3 V to 32 V 3 V to 32 V
Input Type True differential input True differential input True differential input
Frequency Compensation Internally frequency compensated Internally frequency compensated Internally frequency compensated
Supported Supply Configuration Single supply or split supply Single supply or split supply Single supply or split supply
Mounting Type Surface mount Surface mount Surface mount
Primary Product Class General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier

اہم امتیازی خصوصیات

  • Broader industrial temperature coverage than the commercial LM324AM option (بمقابلہLM324AM)
  • Directly matches the LM224 family supply and package configuration (بمقابلہLM224DR)
  • Four independent channels reduce package count (بمقابلہLM224DR)

ڈیزائن نوٹس

Route each differential input pair as a closely coupled signal path and keep it away from switching nodes, inductors, and high-current supply returns. Place the bypass capacitor immediately across the amplifier supply pins and connect it to the quiet ground reference through the shortest practical path. The dual ground pins provide connection flexibility, but both must be connected to a continuous, low-impedance ground plane for reliable operation.

Do not assume that any quad op amp in a 14-pin SOIC is interchangeable solely because the footprint matches. Verify amplifier-channel pin assignments, input polarity, supply range, common-mode range, output swing, and operating temperature. The LM224DR and LM324AM use the familiar quad-op-amp arrangement, but temperature grade and application-level limits can still determine whether a substitution is electrically acceptable.

Keep feedback resistors and high-value input resistors close to their associated amplifier pins, and avoid creating long traces around sensitive summing nodes. For source impedances that are large relative to the amplifier input characteristics, account for bias-current-induced offset. When filtering or driving capacitive loads, verify phase margin with the actual resistor, capacitor, load, and PCB parasitics included.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The onsemi LM224 family is a general-purpose industrial operational amplifier rather than an automotive-qualified AEC-Q100 device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the referenced product descriptions and require confirmation from onsemi.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-10 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

LM224DR2 datasheet LM224DR2 datasheet pdf LM224DR2 pinout LM224DR2 equivalent LM224DR2 replacement LM224DR2 cross reference LM224DR2 vs LM224DR onsemi LM224DR2 LM224DR2 3-32V amplifier LM224DR2 14-SOIC footprint LM224DR2 sensor amplifier LM224DR2 active filter LM224DR2 price LM224DR2 stock LM224DR2 lead time

متعلقہ اجزاء اور اصطلاحات

onsemi LM224DR2 LM224 Texas Instruments LM224DR LM324AM operational amplifier quad operational amplifier signal-conditioning amplifier voltage-gain amplifier differential input true differential input single-supply operation split-supply operation frequency compensation internally compensated amplifier SOIC-14 surface-mount package 3 V to 32 V power supply industrial control sensor signal conditioning active filter process control general-purpose amplifier
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں