onsemi

LM258DR2 - Dual 3-32V Op Amp | onsemi | 8-SOIC IC

Артикул: LM258DR2 ✓ Активен
3 V to 32 V Vdss 8-pin SOIC Package
MOQ: 1 |

LM258DR2 Обзор

onsemi LM258DR2 is a dual general-purpose operational amplifier designed for single-supply or split-supply operation across a 3 V to 32 V operating range. The device provides two amplifiers in an 8-pin SOIC package, with a common-mode input range extending to ground or VEE. Its 700 kHz gain-bandwidth product supports general signal-conditioning and feedback-control applications where a straightforward, widely supported dual amplifier is preferred.

An operational amplifier is an analog building block that compares two input voltages and amplifies the difference between them. The LM258 belongs to the dual-operational-amplifier hierarchy within linear amplifier ICs and broader semiconductor devices. Its two channels can amplify or buffer independent signals within one package, reducing board area compared with separate single-channel amplifiers while preserving familiar industry-standard pin assignments.

The LM258DR2 emphasizes low power drain, operation from a single 3 V to 32 V supply, and common-mode input operation toward ground or VEE. These characteristics make it useful in battery-powered instrumentation, industrial control systems, sensor-conditioning circuits, audio preamplifiers, and general feedback networks. The dual configuration also allows related channels to be used as an amplifier and buffer within the same package.

With a gain-bandwidth product of 700 kHz, the LM258 is suited to moderate-bandwidth analog signal paths rather than high-speed or precision applications requiring substantially greater bandwidth or lower offset. The split-supply capability permits operation around a midpoint reference, while the single-supply mode supports systems where the signal remains near the lower supply rail. Input, output, and supply limits must be respected during design.

Typical uses include low-frequency sensor amplification, audio signal conditioning, audio preamplifiers, active filters, comparators with added feedback, and industrial process-control interfaces. The LM258DR2 is particularly suitable when two conventional amplifier channels are needed without the extra operating supply or board area associated with dual-rail-only precision amplifiers.

Designers should preserve the standard SOIC-8 footprint and verify the manufacturer's pin-description table before routing the PCB. Input common-mode and output swing limits depend on the selected supply voltage and load. Decoupling close to the supply pins, adequate output-current capacity, and stable feedback compensation are essential for dependable operation.

This product page combines package, application, pinout, sourcing, and replacement guidance with practical design considerations. It also distinguishes verified device attributes from parameters that require confirmation with the manufacturer datasheet before release to production.

Аналоги без доработки для LM258DR2 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с LM258DR2 (тот же форм-фактор и посадочное место) — отличается по Common-Mode Input Range, Product Classification, REACH Status, RoHS Status.

STMicroelectronics
Product Classification: Standard general-purpose amplifier
REACH Status: unknown
RoHS Status: unknown
Сравнить с LM258DR2 →
onsemi
Common-Mode Input Range: Extends to ground and VEE
Product Classification: General-purpose operational amplifier
REACH Status: Unaffected
Сравнить с LM258DR2 →

LM258DR2G

✅ Прямая замена
onsemi
📦 8-pin SOIC
2 channels · 3 V to 32 V · 0.6 V/µs · -25°C to +85°C · 0.7 mA · 2 mV · 2 nA · 15 nA

Уточнить цену

Открыть даташит →

LM258DR

✅ Прямая замена
STMicroelectronics
📦 8-pin SOIC
2 circuits · Two independent, internally frequency-compensated operational amplifiers · 30 V · 700 kHz · Single supply or split supply · Extends toward ground and VEE · Low-power class · Standard general-purpose amplifier

Уточнить цену

Открыть даташит →

LM158DT

✅ Прямая замена
📦 8-pin SOIC
Precision LM158-family option in an 8-SOIC package; temperature grade and exact offset, bias-current, and drift ratings differ from the LM258.

📋 Справочный аналог (нет в каталоге)

LM358YD

✅ Прямая замена
📦 8-pin SOIC
STMicroelectronics dual general-purpose amplifier in an 8-SOIC footprint; bandwidth, common-mode range, slew rate, and output-swing limits require verification.

📋 Справочный аналог (нет в каталоге)

LM258DR2 Максимальные параметры и электрические характеристики

Amplifier Type Dual general-purpose operational amplifier
Number of Channels 2 channels
Supply Voltage Range 3 V to 32 V
Gain-Bandwidth Product 700 kHz
Supply Configuration Single supply or split supply
Common-Mode Input Range Extends to ground or VEE
Power Consumption Low power drain
Корпус 8-pin SOIC
Тип монтажа Surface mount

Конфигурация выводов LM258DR2

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Контакт 1 OUT1 — Channel 1 output
Контакт 2 IN1- — Channel 1 inverting input
Контакт 3 IN1+ — Channel 1 non-inverting input
Контакт 4 V- — Negative supply or ground connection
Контакт 5 IN2+ — Channel 2 non-inverting input
Контакт 6 IN2- — Channel 2 inverting input
Контакт 7 OUT2 — Channel 2 output
Контакт 8 V+ — Positive supply connection

Типичное применение

LM258DR2 подходит для 6 применениеs: Industrial Sensor Signal Conditioning, Audio Preamplifier, Active Feedback Filter, Battery-Powered Instrumentation, Process Control Interface, Comparator with Feedback.

🏭

Industrial Sensor Signal Conditioning

The LM258DR2 is appropriate for amplifying low-bandwidth sensor signals in industrial measurement circuits because its 3 V to 32 V supply range supports both compact low-voltage systems and higher-voltage industrial rails. The two channels can condition or buffer related signals while sharing an 8-pin SOIC footprint. The onsemi LM258 datasheet identifies low power drain, split- or single-supply operation, and common-mode input operation extending to ground or VEE. Before deployment, verify the input offset, bias current, noise, output swing, and common-mode limits against the sensor output and production temperature range.

🎧

Audio Preamplifier

The LM258DR2 can provide two general-purpose amplifier channels for an audio preamplifier or line-level conditioning stage. Its 700 kHz gain-bandwidth product is suitable for many conventional low-to-moderate-bandwidth audio paths, while low power drain is useful in portable or space-constrained equipment. The dual SOIC package reduces board area by combining two functions in one component. Confirm output headroom, slew rate, noise, and channel-to-channel behavior in the manufacturer electrical-characteristics table, especially when driving a load through an additional output stage.

📻

Active Feedback Filter

The LM258DR2 suits active feedback networks that require conventional amplification within a 700 kHz gain-bandwidth capability. Its two independent channels allow designers to implement sections such as first-order or modest multi-stage filters, depending on the selected topology and component tolerances. The common-mode input range extending toward ground or VEE supports single-supply filter designs in which signals operate near the lower rail. Verify stability, gain-bandwidth margin, output loading, and exact frequency-response targets before treating the circuit as production-ready.

🔋

Battery-Powered Instrumentation

The LM258DR2 works well as a general-purpose dual amplifier in battery-powered instrumentation because the manufacturer describes low power drain and supports a 3 V minimum supply voltage. Two channels can be used for signal conditioning and buffering without using two separate IC packages. Operation from a single supply simplifies power architecture, and the common-mode input capability extending toward ground or VEE supports sensors with limited output swing. Determine actual battery-life impact from the supply-current conditions, output state, load, and temperature rather than using the low-power-drain description alone.

🖥️

Process Control Interface

The LM258DR2 is suitable for process-control interface stages that condition a sensor signal before an ADC, controller, or actuator driver. Its 3 V to 32 V operating range accommodates both compact embedded electronics and industrial control systems, while split-supply operation allows signal handling around a biased reference. The two channels can support related gain and buffering functions. Ensure the selected operating point remains within the input common-mode and output swing limits, and assess offset, drift, noise, and overload recovery against the control-loop accuracy requirement.

🔧

Comparator with Feedback

The LM258DR2 can operate as a comparator when feedback is used to create a defined output state rather than relying on open-loop saturation behavior. This arrangement can provide threshold detection or limiting in low-bandwidth control and signal-conditioning systems. Its two channels allow one stage to perform buffering or amplification before the threshold stage. The 3 V to 32 V supply range supports varied rail conditions, while low power drain is beneficial in embedded systems. Review input overvoltage, output saturation, propagation behavior, and stability in the manufacturer documentation before applying this configuration.

Сводка рекомендуемых товаров

LM258DR2G onsemi Используется в: Industrial Sensor Signal Conditioning, Active Feedback Filter, Process Control Interface LM258DR STMicroelectronics Используется в: Industrial Sensor Signal Conditioning, Audio Preamplifier, Battery-Powered Instrumentation, Comparator with Feedback LM358YD Alternative dual general-purpose amplifier for comparison Используется в: Audio Preamplifier, Battery-Powered Instrumentation, Comparator with Feedback LM158DT LM158-family precision option for lower-offset applications Используется в: Active Feedback Filter, Process Control Interface
What is the onsemi LM258DR2?
The onsemi LM258DR2 is a dual general-purpose operational amplifier packaged in an 8-pin SOIC. According to the onsemi LM258 datasheet, it operates from 3 V to 32 V and supports both single-supply and split-supply configurations. Its two amplifier channels provide common-mode input operation extending to ground or VEE, making the device suitable for conventional analog signal-conditioning and feedback-control circuits.
What are the key specifications of LM258DR2 that engineers should know?
The key LM258DR2 specifications are a 3 V to 32 V supply range, two amplifier channels, a 700 kHz gain-bandwidth product, low power drain, and an 8-pin SOIC package. According to the onsemi LM258 datasheet, the device also supports single- or split-supply operation and has a common-mode input range extending to ground or VEE. These characteristics define it as a general-purpose, moderate-bandwidth dual amplifier.
Can LM258DR2 operate from a single 5 V supply?
Yes, the LM258DR2 can operate from a single 5 V supply because its specified operating range is 3 V to 32 V. The onsemi LM258 datasheet also states that the common-mode input range extends toward ground or VEE. When designing a single-supply circuit, verify the required input and output voltage range at the chosen supply voltage so the signal remains inside the amplifier's linear operating limits.
Where can I download the LM258DR2 datasheet PDF?
The LM258DR2 datasheet is available through the onsemi LM258 family documentation and the linked manufacturer-data reference for this page. Use the pin-description table, electrical-characteristics table, and typical-application circuits in the manufacturer datasheet before finalizing the PCB or power-supply design. The LM258 family documentation identifies a 3 V to 32 V operating range and a 700 kHz gain-bandwidth product.
Where can I find the LM258DR2 pinout?
The LM258DR2 uses the standard 8-pin SOIC dual operational-amplifier pin arrangement: OUT1, IN1-, IN1+, V-, IN2+, IN2-, OUT2, and V+, numbered 1 through 8. Use the manufacturer's pin-description table when assigning PCB tracks and confirming that no connection is left floating. The package is represented by the canonical 8-pin SOIC footprint on this page.
Is LM258DR2 the same as LM258DR?
The LM258DR2 and LM258DR are closely related 8-SOIC dual operational amplifiers, but they should not be treated as identical ordering options without checking the responsible manufacturer, suffix, temperature range, and qualification requirements. The LM258DR listing identifies an 8-SOIC device, while LM258DR2 is associated with onsemi. Verify the pin description and electrical limits before substituting one for the other.
What can replace LM258DR2?
The closest documented replacement candidates include LM258DR2G, LM258DR, LM158DT, and LM358YD, all associated with 8-pin dual-amplifier ordering variants. However, a drop-in replacement must match the package, pin arrangement, supply range, common-mode behavior, output swing, and temperature requirements. Compare the manufacturer datasheet and qualification status before approving any substitution for production.
When should I choose LM258DR2 over LM358YD?
Choose LM258DR2 when the design is specifically qualified around the onsemi LM258 family and its characterized behavior. LM358YD may offer similar general-purpose dual-amplifier functionality in an 8-pin package, but it is associated with STMicroelectronics and must be checked for differences in electrical limits, supply behavior, common-mode range, offset, slew rate, and lifecycle. Use the manufacturer comparison data as the final acceptance criterion.
Is LM258DR2 suitable for industrial sensor-conditioning applications?
Yes, LM258DR2 is suitable for many industrial sensor-conditioning applications because it supports a 3 V to 32 V operating range, split- or single-supply operation, and common-mode input operation toward ground or VEE. Its 700 kHz gain-bandwidth product is suitable for many low-bandwidth sensor paths. For high-precision or high-noise applications, verify offset, bias current, drift, and noise against the system requirements.
How much power does the LM258DR2 consume?
The onsemi LM258 datasheet describes the LM258 family as having low power drain, but the exact supply current depends on the supply voltage, output state, load, and operating channel state. Calculate worst-case dissipation from the device's quiescent and load-current specifications, then confirm that the SOIC package remains within its rated junction temperature. Do not infer a single power value across all operating conditions.
What is the best Texas Instruments equivalent for LM258DR2?
The LM258DR is the closest Texas Instruments candidate listed for comparison because it is an LM258-family, 8-SOIC dual operational amplifier. It can serve as a footprint-oriented alternative, but it is not automatically identical: confirm supply range, electrical characteristics, temperature grade, pin functions, lifecycle, and qualification requirements in the Texas Instruments datasheet before using it as a drop-in replacement.
Where can I buy LM258DR2 online?
Use the Request a Quote form on this page to request LM258DR2 pricing, current availability, and lead time for the exact 8-pin SOIC ordering code. The request should identify the required quantity, shipment destination, and any date-sensitive production requirements. This avoids accepting a family-level price or an incorrect package or manufacturer variant.
What is the price of LM258DR2?
The current unit price and quantity breaks for LM258DR2 are handled through the Request a Quote form on this page. Submit the exact MPN LM258DR2 and required quantity so the quotation can be matched to the onsemi 8-pin SOIC device. The form is the appropriate route for live commercial pricing rather than a static price copied from a listing.
What is the lead time for LM258DR2?
Lead time for LM258DR2 depends on current factory and channel inventory, order quantity, and the date required by the build schedule. Submit the quantity and required delivery date through the Request a Quote form on this page. For production planning, request a written supply commitment rather than relying on a generic family-level availability statement.
Is LM258DR2 currently in stock?
Current LM258DR2 stock status should be confirmed through the Request a Quote form on this page using the exact onsemi MPN and required quantity. Availability can change with factory replenishment and order size, so treat a general catalog indication as non-binding. Specify the shipment destination and required date when requesting the current quotation and lead-time response.

Справочные инженерные данные для LM258DR2 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose LM258DR2 when the design needs a conventional dual amplifier with a documented 3 V to 32 V operating range, 700 kHz gain-bandwidth product, and common-mode input operation extending toward ground or VEE. LM258DR2G is the first alternative to review when a second onsemi ordering suffix can meet the production requirements, because its same-family relationship reduces configuration changes. LM258DR is a Texas Instruments LM258-family option with the same 8-SOIC footprint, but its 30 V maximum supply rating and operating-temperature specification require careful comparison. LM158DT may suit designs needing LM158-family precision characteristics, while LM358YD is a STMicroelectronics general-purpose alternative that requires verification of bandwidth, common-mode range, output swing, and electrical limits. For any substitution, verify the exact pin description, supply range, temperature grade, qualification, and lifecycle status before releasing the PCB.

Сравнение с аналогами

Параметр Этот товар LM258DR2G LM258DR LM158DT LM358YD
Brand onsemi onsemi Texas Instruments Texas Instruments STMicroelectronics
Package 8-pin SOIC 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same
Amplifier Configuration Dual operational amplifier Dual operational amplifier Dual operational amplifier Dual operational amplifier Dual operational amplifier
Special Positioning General-purpose LM258 family device Closest onsemi LM258 ordering variant Texas Instruments LM258 family device Precision LM158 family device General-purpose LM358 family device

Ключевые отличия

  • Direct onsemi family ordering alternative (против LM258DR2G)
  • Broad single-supply operating range (против LM358YD)
  • Published 700 kHz bandwidth target (против LM158DT)
  • Single-supply common-mode operation (против LM158DT)

Заметки по проектированию

Place the device to match the standard 8-pin SOIC footprint and preserve clearance around pins 4 and 8 for the supply connections. Follow the manufacturer pin-description table when assigning input, output, and supply nets. A ground or supply-return plane close to the IC can reduce loop area, but high-current return paths should remain separate from sensitive input nodes to prevent shared-impedance disturbance.

The LM258DR2 supports single- and split-supply operation across a 3 V to 32 V range. In single-supply designs, keep the signal within the usable common-mode and output-swing limits rather than assuming the full supply range appears at the output. In split-supply designs, connect V- to the intended negative rail and confirm that every connected node remains within the absolute maximum input and output limits.

Do not use the generic LM258 name to assume that every ordering suffix has identical temperature, qualification, compliance, or lifecycle characteristics. Review the exact onsemi suffix, electrical table, package drawing, and ordering information for LM258DR2. Also avoid replacing the device solely because another dual amplifier uses an 8-SOIC package; check pin functions and compare offset, bias current, bandwidth, slew rate, output swing, and supply limits.

Keep feedback resistors and compensation components close to the relevant amplifier pins, and route sensitive non-inverting inputs away from supply and output nodes. When both channels are used, evaluate their grounding and feedback networks independently so current in one channel does not create voltage disturbance in the other. A solid return plane and short supply-decoupling path help preserve predictable behavior in low-bandwidth analog systems.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The LM258 family is a general-purpose operational amplifier rather than an automotive-qualified device. Exact suffix-specific environmental and material compliance must be confirmed with onsemi before production release.

Данные проверены: 2026-11-10 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

LM258DR2 datasheet LM258DR2 pinout LM258DR2 datasheet pdf LM258DR2 equivalent LM258DR2 replacement LM258DR2 cross reference LM258DR2 vs LM258DR LM258DR2 footprint onsemi LM258DR2 LM258DR2 price LM258DR2 stock LM258DR2 application circuit LM258DR2 3-32V amplifier LM258DR2 8-SOIC pinout

Связанные компоненты & термины

onsemi LM258DR2 LM258DR2G LM258DR LM158DT LM358YD Texas Instruments STMicroelectronics dual operational amplifier linear amplifier IC analog signal conditioning feedback control single-supply operation split-supply operation gain-bandwidth product common-mode input range ground or VEE low power drain 3 V to 32 V supply 700 kHz 8-pin SOIC SOIC package family surface-mount package RoHS REACH
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ