Texas Instruments

LM2903AVQPWRG4Q1 - Dual 32V Automotive Comparator | Texas Instruments

Артикул: LM2903AVQPWRG4Q1 ✓ Активен
2 V to 36 V Vdss 0.4 mA typical Id 8-pin TSSOP Package
MOQ: 1 |

LM2903AVQPWRG4Q1 Обзор

Texas Instruments LM2903AVQPWRG4Q1 is an automotive, dual differential comparator with two independent open-collector outputs, a 36 V maximum supply voltage, and an 8-pin TSSOP package. The device supports single-supply or dual-supply operation, with input voltage ranges of 2 V to 36 V or ±1 V to ±18 V. It is AEC-Q100 qualified in Grade 0 and Grade 1.

A differential comparator is an analog integrated circuit that compares two input voltages and changes its output state according to their relationship. The LM2903AVQPWRG4Q1 belongs to the comparator hierarchy: differential comparator, analog comparator, linear integrated circuit, and semiconductor. Its open-collector outputs allow the output transition speed and current limit to be controlled with an external pull-up resistor, making the device useful in sensing, threshold detection, and automotive interface circuits.

The next-generation LM2903-Q1 family provides lower offset voltage, lower supply current, lower input bias current, and lower propagation delay than earlier LM2903 variants. Published family information lists a typical propagation delay of 1.3 µs, typical supply current of 0.4 mA per comparator, maximum input bias current of 50 nA, and maximum input offset voltage of 7 mV at 25°C. A comparison listing also identifies a maximum offset voltage of 2 mV at 5 V for this ordering variant.

Two independent comparators are integrated into one package, allowing simultaneous monitoring of two thresholds or complementary sensing functions. The extended 36 V supply rating supports systems whose signal and supply levels exceed the range of conventional low-voltage comparators. Improved 2 kV ESD performance adds handling and application robustness in cost-sensitive automotive and industrial environments.

Typical uses include automotive battery and power-system monitoring, sensor threshold detection, overvoltage and undervoltage indication, window-comparator circuits, and industrial control inputs. The open-collector output can directly pull a logic rail low, while the external pull-up resistor establishes the high state. Each comparator remains electrically independent, so the two channels can also implement complementary decisions.

Designers should select the external pull-up resistor to suit the output voltage, sink-current capability, rise-time target, and system leakage currents. Inputs should remain within the device's common-mode limits at all supply combinations, and unused comparator inputs must be tied to a defined voltage rather than left floating. Automotive designs should use the specified AEC-Q100 grade and verify the complete operating temperature range for the ordered configuration.

This product page combines the manufacturer family description, package and qualification details, practical comparator design guidance, and a focused comparison with same-footprint alternatives. It is intended to help engineers identify the correct orderable device and implement its open-collector outputs without treating a similar package number as an automatic functional replacement.

Аналоги без доработки для LM2903AVQPWRG4Q1 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с LM2903AVQPWRG4Q1 (тот же форм-фактор и посадочное место) — отличается по Package, Maximum Supply Voltage, Comparator Type, Output Type, Input Bias Current.

Texas Instruments
Package: 8-pin TSSOP (PW)
Maximum Supply Voltage: 38 V
Output Type: Open-collector, rail-to-rail
Сравнить с LM2903AVQPWRG4Q1 →
Texas Instruments
Input Bias Current: 3.5nA maximum
Сравнить с LM2903AVQPWRG4Q1 →
Texas Instruments
Package: 8-pin TSSOP
Comparator Type: Dual differential comparator
Output Type: Open-collector
Сравнить с LM2903AVQPWRG4Q1 →
Texas Instruments
Package: 8-TSSOP
Maximum Supply Voltage: 30 V
Comparator Type: Dual differential general-purpose comparator
Сравнить с LM2903AVQPWRG4Q1 →

LM2903VQPWRG4Q1

✅ Прямая замена
Texas Instruments
📦 8-pin TSSOP
Dual differential comparator · 2 channels · 2 independent comparators · Open-collector · 30 V · 2 V · 2 V to 36 V · 0.4 mA typical

Уточнить цену

Открыть даташит →

LM2903AVQPWRG4

✅ Прямая замена
Texas Instruments
📦 8-pin TSSOP
Dual differential comparator · 2 channels · 2 V to 36 V · ±1 V to ±18 V · Open-collector, rail-to-rail · 38 V · 0.37 mV · 3.5 nA

Уточнить цену

Открыть даташит →

LM2903PWR

✅ Прямая замена
Texas Instruments
📦 8-pin TSSOP
Dual differential comparator · 2 channels · Open-collector · Rail-to-rail · ±18V / 36V total · Up to 38V · 0.37mV maximum · 3.5nA maximum

Уточнить цену

Открыть даташит →

LM2903B-Q1

✅ Прямая замена
📦 8-pin TSSOP
The LM2903B-Q1 family provides lower offset voltage, lower supply current, lower input bias current, lower propagation delay, and improved 2 kV ESD performance relative to earlier LM2903 devices; exact orderable suffix and limits require verification.

📋 Справочный аналог (нет в каталоге)

LM393APWRE4

✅ Прямая замена
Texas Instruments
📦 8-pin TSSOP
Dual differential general-purpose comparator · 2 channels · Single supply or split supply · 30 V · Open-collector · Rail-to-rail open-collector output · 0.3 us · 0.4 mA typical per comparator

Уточнить цену

Открыть даташит →

LM2903AVQPWRG4Q1 Максимальные параметры и электрические характеристики

Comparator Type Dual differential comparator
Number of Channels 2 channels
Тип выхода Open-collector
Single-Supply Voltage Range 2 V to 36 V
Dual-Supply Voltage Range ±1 V to ±18 V
Maximum Supply Voltage 36 V
Propagation Delay 1.3 µs
Supply Current per Channel 0.4 mA typical
Input Bias Current 50 nA maximum
Input Offset Voltage 7 mV maximum at 25°C
Input Offset Voltage at 5 V 2 mV maximum at 5 V
ESD Performance 2 kV
Automotive Qualification AEC-Q100 Grade 0 and Grade 1
Корпус 8-pin TSSOP
Packaging Tape and reel
Тип монтажа Surface mount

Конфигурация выводов LM2903AVQPWRG4Q1

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
Контакт 1 1OUT — Open-collector output of comparator channel 1
Контакт 2 1IN- — Inverting input of comparator channel 1
Контакт 3 1IN+ — Non-inverting input of comparator channel 1
Контакт 4 GND — Ground connection
Контакт 5 2IN+ — Non-inverting input of comparator channel 2
Контакт 6 2IN- — Inverting input of comparator channel 2
Контакт 7 2OUT — Open-collector output of comparator channel 2
Контакт 8 VCC — Positive supply connection

Типичное применение

LM2903AVQPWRG4Q1 подходит для 6 применениеs: Automotive Battery Threshold Monitoring, Automotive Overvoltage and Undervoltage Detection, Industrial Sensor Limit Detection, Window Comparator Fault Detection, Power-Supply Sequencing and Fault Logic, Complementary System Interlock.

🚗

Automotive Battery Threshold Monitoring

The LM2903AVQPWRG4Q1 fits automotive battery-monitoring circuits because its supply range extends to 36 V and the LM2903-Q1 family is AEC-Q100 qualified in Grade 0 and Grade 1. Its two independent differential channels can evaluate separate charge or discharge thresholds. Open-collector outputs can pull a controller input or fault line low, while external pull-up resistors establish the logic-high state. The 2 kV ESD rating supports robust design, although the final circuit still needs transient suppression, input common-mode verification, and confirmation of the required automotive temperature grade.

⚡

Automotive Overvoltage and Undervoltage Detection

A pair of LM2903AVQPWRG4Q1 channels can implement independent overvoltage and undervoltage indications around a system rail. Place the rail or divided sensing voltage against a precision reference at the comparator inputs, then use the open-collector outputs to alert a microcontroller through suitable pull-ups. The device's 2 V to 36 V single-supply range supports higher-energy automotive systems, while 0.4 mA typical supply current per comparator helps limit standing load. Protection components must be selected separately to withstand automotive transients and maintain the inputs within the common-mode limits.

🏭

Industrial Sensor Limit Detection

The LM2903AVQPWRG4Q1 can compare a scaled sensor signal with a reference to detect an upper or lower operating limit. Its differential inputs allow the sensor and reference to share a common ground, and its 1.3 µs propagation delay suits many monitoring and control loops. The 8-pin TSSOP package supports compact placement, while two independent channels reduce the component count for dual-limit detection. Because the output is open collector, a pull-up resistor and any interface-device current limit must be evaluated, and the sensor signal must remain within the comparator's permitted common-mode range.

📺

Window Comparator Fault Detection

Two LM2903AVQPWRG4Q1 channels can form a window detector by comparing an input against lower and upper reference limits and combining their open-collector states externally. The device is appropriate when a fault signal must remain active only while a measured voltage lies outside the acceptable range. Each channel is independent, permitting separate references and hysteresis networks. With a maximum supply of 36 V, the comparator can also monitor higher-voltage systems after suitable input attenuation. Pull-up resistor selection, logic-state interpretation, input common-mode range, and automotive qualification must be confirmed before implementation.

🔧

Power-Supply Sequencing and Fault Logic

LM2903AVQPWRG4Q1 channels can monitor divided power-rail voltages and provide open-collector fault indications for sequencing controllers. The wide supply range supports systems operating up to 36 V, while the two-channel architecture permits independent checks of two rails. An external pull-up resistor allows each fault output to interface with the voltage domain used by a controller or logic gate. Designers should account for output rise time, controller input leakage, reference accuracy, and input attenuation. The 2 kV ESD rating improves robustness but does not replace the transient-protection design required for harsh automotive environments.

🛡️

Complementary System Interlock

The two independent comparators in LM2903AVQPWRG4Q1 can generate complementary permission signals for a two-condition interlock. For example, one channel can verify that a safety-related voltage is above a minimum threshold while the other verifies a second condition below a maximum threshold. Their open-collector outputs can be pulled up separately or connected to a suitable logic network, depending on the required fault-safe polarity. The 1.3 µs propagation delay supports relatively prompt decisions, while the 50 nA maximum input bias current reduces reference-loading effects. Final validation must cover logic polarity, system timing, temperature grade, and failure-mode analysis.

What is the LM2903AVQPWRG4Q1?
The LM2903AVQPWRG4Q1 is a Texas Instruments dual differential comparator with two independent open-collector outputs, a 36 V maximum supply voltage, and an 8-pin TSSOP package. According to the LM2903-Q1 product page, the family is AEC-Q100 qualified in Grade 0 and Grade 1 for automotive applications. Each channel compares its inverting and non-inverting inputs and provides a logic-level indication of the comparison.
What is the operating voltage of LM2903AVQPWRG4Q1?
The LM2903AVQPWRG4Q1 operates from 2 V to 36 V in a single-supply configuration or from ±1 V to ±18 V when powered by dual supplies. A component comparison identifies the same 2 V to 36 V operating range for the device. The wide range accommodates low-voltage logic systems and substantially higher-voltage industrial or automotive sensing environments, provided the input common-mode limits are observed.
What are the key specifications of LM2903AVQPWRG4Q1?
The principal LM2903AVQPWRG4Q1 specifications are a 36 V maximum supply, 1.3 µs propagation delay, 0.4 mA typical supply current per channel, 50 nA maximum input bias current, and a 2 kV ESD rating. The device contains two independent differential comparators with open-collector outputs in an 8-pin TSSOP package. The LM2903-Q1 family is AEC-Q100 qualified in Grade 0 and Grade 1.
Where can I download the LM2903AVQPWRG4Q1 datasheet PDF?
The official LM2903AVQPWRG4Q1 documentation begins on the Texas Instruments LM2903-Q1 product page, which links to the manufacturer data sheet and orderable-device information. A PDF copy is also indexed under the exact MPN. For design sign-off, use the TI document because it defines the exact ordering code, electrical limits, pin descriptions, temperature grades, and application guidance for LM2903AVQPWRG4Q1.
Where can I find the LM2903AVQPWRG4Q1 pinout?
The LM2903AVQPWRG4Q1 pinout is defined in the LM2903-Q1 manufacturer data sheet. The device uses an 8-pin TSSOP with two independent comparator channels, open-collector outputs, power, ground, and four differential input pins. Use the pin-description table when assigning PCB nets because the package uses standard TSSOP numbering and must match the physical orientation marker on the board.
How does the LM2903AVQPWRG4Q1 open-collector output work?
Each LM2903AVQPWRG4Q1 output can sink current and pull its connected node toward ground, but it does not actively drive a high voltage. An external pull-up resistor connects the output node to the desired positive supply, creating the high state when the comparator transistor is off. The resistor also controls output rise time, so its value must be coordinated with capacitance, leakage current, and required switching speed.
What can replace the LM2903AVQPWRG4Q1?
The LM2903AVQPWRG4Q1 can be replaced only after confirming package, pinout, supply limits, common-mode range, output topology, and qualification requirements. Same-family Texas Instruments options include LM2903VQPWRG4Q1 and LM2903AVQPWRG4, while LM2903PWR is a related 8-pin TSSOP ordering. A footprint match alone is insufficient because automotive qualification, temperature grade, and electrical limits can differ between variants.
Is LM2903AVQPWRG4Q1 the same as LM2903VQPWRG4Q1?
No. Both devices are 8-pin TSSOP dual comparators in the LM2903 family, but their ordering suffixes distinguish different device variants. The LM2903AVQPWRG4Q1 is identified as the automotive AEC-Q100 Grade 0 and Grade 1 option, while LM2903VQPWRG4Q1 is a related low-power comparator ordering. Review the ordering table, temperature grade, and absolute-maximum ratings before treating either part as interchangeable.
What is the best Texas Instruments equivalent for LM2903AVQPWRG4Q1?
The closest Texas Instruments family candidates are LM2903VQPWRG4Q1, LM2903AVQPWRG4, and LM2903PWR because they use the same 8-pin TSSOP format and implement dual open-collector comparators. They are not automatically equivalent: LM2903AVQPWRG4Q1 specifically carries AEC-Q100 Grade 0 and Grade 1 positioning. Select the replacement according to the required temperature grade, qualification, offset, supply-current, and propagation-delay limits.
When should I choose LM2903AVQPWRG4Q1 over LM2903VQPWRG4Q1?
Choose LM2903AVQPWRG4Q1 when the design requires the automotive-qualified LM2903-Q1 configuration and its associated Grade 0 or Grade 1 operating range. LM2903VQPWRG4Q1 may suit a related low-power comparator design when its qualification and electrical limits satisfy the system requirements. Both use an 8-pin TSSOP, but identical packaging does not eliminate the need to compare qualification and parameter limits.
Is LM2903AVQPWRG4Q1 suitable for automotive battery monitoring?
The LM2903AVQPWRG4Q1 is suitable for automotive threshold-monitoring functions because it supports a 2 V to 36 V supply range and is AEC-Q100 qualified in Grade 0 and Grade 1. Its two independent channels can monitor different thresholds, while the 2 kV ESD rating improves robustness. The final design must still verify input common-mode limits, automotive temperature grade, transient protection, and open-collector pull-up behavior.
What is the difference between LM2903AVQPWRG4Q1 and LM393APWR?
Both are dual comparator devices associated with 8-pin TSSOP packages, but their qualification and ordering details differ. LM2903AVQPWRG4Q1 is an AEC-Q100 Grade 0 and Grade 1 LM2903-Q1 device with a 36 V maximum supply, while LM393APWR belongs to the LM393 family. Before substitution, verify input common-mode range, offset voltage, supply current, propagation delay, temperature grade, and channel pinout.
Where can I buy LM2903AVQPWRG4Q1 online?
Use the Request a Quote form on this page to request LM2903AVQPWRG4Q1 availability, current lead time, and order quantities. The exact orderable code is LM2903AVQPWRG4Q1 in an 8-pin TSSOP tape-and-reel package. A quotation request preserves the exact suffix and reduces the risk of confusing it with LM2903AVQPWRG4, LM2903VQPWRG4Q1, or another member of the comparator family.
What is the price of LM2903AVQPWRG4Q1?
Request the current LM2903AVQPWRG4Q1 quotation through the Request a Quote form on this page. The quotation should identify the exact 8-pin TSSOP tape-and-reel orderable code and include the requested quantity, delivery location, and target date. Because automotive qualification, grade, and packaging form part of the ordering code, compare quotations against LM2903AVQPWRG4Q1 rather than a generic LM2903 family price.
What is the lead time and stock status for LM2903AVQPWRG4Q1?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page. Stock status changes with inventory and order configuration, so it should be confirmed for the exact LM2903AVQPWRG4Q1 suffix and 8-pin TSSOP tape-and-reel format. Include production forecast and any required automotive traceability details when requesting the quotation.
Is LM2903AVQPWRG4Q1 currently active?
The LM2903AVQPWRG4Q1 is listed as an active orderable device in current product information, and the Texas Instruments LM2903-Q1 family remains available. A component comparison identifies the LM2903 family product status as active. For a production release, confirm the exact orderable code, package, delivery configuration, and lifecycle status when requesting a quotation.

Справочные инженерные данные для LM2903AVQPWRG4Q1 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose LM2903AVQPWRG4Q1 when the design needs two independent open-collector comparators, a supply range extending to 36 V, and automotive AEC-Q100 Grade 0 or Grade 1 positioning. Choose LM2903VQPWRG4Q1 when its low-power characterization better matches the operating budget, after confirming its qualification and exact limits. Choose LM2903AVQPWRG4 for a non-Q1 automotive-family ordering when Grade 0 or Grade 1 qualification is unnecessary. Choose LM2903PWR for the related 30 V maximum-supply version, recognizing the 6 V lower voltage ceiling. Choose LM393APWR only after verifying the LM393 family's common-mode range, offset, current, delay, and temperature limits. For every alternative, confirm the 8-pin TSSOP pinout, open-collector pull-up arrangement, input bias effects, and automotive qualification before release.

Сравнение с аналогами

Параметр Этот товар LM2903VQPWRG4Q1 LM2903AVQPWRG4 LM2903PWR LM2903B-Q1 LM393APWR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP
Comparator Channels 2 2 2 2 2 2
Output Type Open-collector Open-drain Open-collector Open-collector Open-collector Open-collector

Ключевые отличия

  • Automotive qualification in the selected ordering (против LM2903AVQPWRG4)
  • 36 V supply capability (против LM2903PWR)
  • Next-generation automotive family improvements (против LM2903B-Q1)

Заметки по проектированию

Choose each output pull-up resistor against the target logic voltage, output leakage, pull-up current, input capacitance, and required rise time. Open-collector outputs do not source the high state independently. Also verify that the pull-up rail and output node remain within the device's absolute-maximum limits. In a dual-supply design, account for the separate negative-supply connection and ensure no output pull-up introduces an unintended current path.

Do not treat an 8-pin TSSOP footprint match as sufficient proof of interchangeability. Compare the LM2903-Q1 ordering table, input common-mode limits, offset voltage, supply current, propagation delay, output behavior, temperature grade, and AEC-Q100 status. LM2903AVQPWRG4Q1, LM2903VQPWRG4Q1, LM2903AVQPWRG4, LM2903PWR, and LM393APWR share the listed package format but represent different ordering requirements.

Keep comparator input traces short and route them away from switching nodes and high-current paths. Place the bias or reference network close to the relevant input pins, and provide a low-impedance ground return for both channels. The two comparators are independent but share package power and ground, so supply and ground routing must avoid coupling one channel's switching event into the other channel's decision.

Do not leave either differential input floating. Unused channels should be disabled by tying both inputs to a defined common-mode voltage and leaving the open-collector output in a defined state with an appropriate pull-up. Also account for the 50 nA maximum input bias current when selecting high-value reference dividers, because its effect on threshold error increases with resistance.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Texas Instruments identifies LM2903-Q1 as AEC-Q100 qualified in Grade 0 and Grade 1. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly stated.

Данные проверены: 2026-11-09 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

lm2903avqpwrg4q1 data sheet LM2903AVQPWRG4Q1 datasheet LM2903AVQPWRG4Q1 datasheet pdf LM2903AVQPWRG4Q1 pinout LM2903AVQPWRG4Q1 equivalent LM2903AVQPWRG4Q1 replacement LM2903AVQPWRG4Q1 drop-in replacement LM2903AVQPWRG4Q1 TSSOP footprint LM2903AVQPWRG4Q1 automotive comparator LM2903AVQPWRG4Q1 open collector output Texas Instruments LM2903AVQPWRG4Q1 LM2903AVQPWRG4Q1 vs LM2903VQPWRG4Q1 LM2903AVQPWRG4Q1 price LM2903AVQPWRG4Q1 stock

Связанные компоненты & термины

Texas Instruments LM2903AVQPWRG4Q1 LM2903-Q1 LM2903VQPWRG4Q1 LM2903AVQPWRG4 LM2903PWR LM2903B-Q1 LM393APWR dual differential comparator analog comparator linear integrated circuit semiconductor open-collector output differential input input common-mode range input offset voltage input bias current propagation delay supply current automotive electronics battery monitoring overvoltage detection undervoltage detection industrial sensor monitoring 8-pin TSSOP TSSOP package family surface-mount package AEC-Q100 RoHS REACH ESD protection
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ