LM2903AVQPWRG4Q1 - Dual 32V Automotive Comparator | Texas Instruments
MPN: LM2903AVQPWRG4Q1 ✓ فعالLM2903AVQPWRG4Q1 نمای کلی
A differential comparator is an analog integrated circuit that compares two input voltages and changes its output state according to their relationship. The LM2903AVQPWRG4Q1 belongs to the comparator hierarchy: differential comparator, analog comparator, linear integrated circuit, and semiconductor. Its open-collector outputs allow the output transition speed and current limit to be controlled with an external pull-up resistor, making the device useful in sensing, threshold detection, and automotive interface circuits.
The next-generation LM2903-Q1 family provides lower offset voltage, lower supply current, lower input bias current, and lower propagation delay than earlier LM2903 variants. Published family information lists a typical propagation delay of 1.3 µs, typical supply current of 0.4 mA per comparator, maximum input bias current of 50 nA, and maximum input offset voltage of 7 mV at 25°C. A comparison listing also identifies a maximum offset voltage of 2 mV at 5 V for this ordering variant.
Two independent comparators are integrated into one package, allowing simultaneous monitoring of two thresholds or complementary sensing functions. The extended 36 V supply rating supports systems whose signal and supply levels exceed the range of conventional low-voltage comparators. Improved 2 kV ESD performance adds handling and application robustness in cost-sensitive automotive and industrial environments.
Typical uses include automotive battery and power-system monitoring, sensor threshold detection, overvoltage and undervoltage indication, window-comparator circuits, and industrial control inputs. The open-collector output can directly pull a logic rail low, while the external pull-up resistor establishes the high state. Each comparator remains electrically independent, so the two channels can also implement complementary decisions.
Designers should select the external pull-up resistor to suit the output voltage, sink-current capability, rise-time target, and system leakage currents. Inputs should remain within the device's common-mode limits at all supply combinations, and unused comparator inputs must be tied to a defined voltage rather than left floating. Automotive designs should use the specified AEC-Q100 grade and verify the complete operating temperature range for the ordered configuration.
This product page combines the manufacturer family description, package and qualification details, practical comparator design guidance, and a focused comparison with same-footprint alternatives. It is intended to help engineers identify the correct orderable device and implement its open-collector outputs without treating a similar package number as an automatic functional replacement.
جایگزینهای drop-in برای LM2903AVQPWRG4Q1 — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای LM2903AVQPWRG4Q1 (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Maximum Supply Voltage, Comparator Type, Output Type, Input Bias Current.
LM2903VQPWRG4Q1
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←LM2903AVQPWRG4
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←LM2903PWR
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←LM2903B-Q1
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
LM393APWRE4
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←LM2903AVQPWRG4Q1 حداکثر مقادیر مجاز و مشخصات الکتریکی
| Comparator Type | Dual differential comparator |
| Number of Channels | 2 channels |
| نوع خروجی | Open-collector |
| Single-Supply Voltage Range | 2 V to 36 V |
| Dual-Supply Voltage Range | ±1 V to ±18 V |
| Maximum Supply Voltage | 36 V |
| Propagation Delay | 1.3 µs |
| Supply Current per Channel | 0.4 mA typical |
| Input Bias Current | 50 nA maximum |
| Input Offset Voltage | 7 mV maximum at 25°C |
| Input Offset Voltage at 5 V | 2 mV maximum at 5 V |
| ESD Performance | 2 kV |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 |
| بستهبندی | 8-pin TSSOP |
| Packaging | Tape and reel |
| نوع نصب | Surface mount |
پیکربندی پین LM2903AVQPWRG4Q1
| پین 1 | 1OUT — Open-collector output of comparator channel 1 |
| پین 2 | 1IN- — Inverting input of comparator channel 1 |
| پین 3 | 1IN+ — Non-inverting input of comparator channel 1 |
| پین 4 | GND — Ground connection |
| پین 5 | 2IN+ — Non-inverting input of comparator channel 2 |
| پین 6 | 2IN- — Inverting input of comparator channel 2 |
| پین 7 | 2OUT — Open-collector output of comparator channel 2 |
| پین 8 | VCC — Positive supply connection |
کاربردهای معمول
LM2903AVQPWRG4Q1 مناسب است برای 6 کاربردs: Automotive Battery Threshold Monitoring, Automotive Overvoltage and Undervoltage Detection, Industrial Sensor Limit Detection, Window Comparator Fault Detection, Power-Supply Sequencing and Fault Logic, Complementary System Interlock.
Automotive Battery Threshold Monitoring
The LM2903AVQPWRG4Q1 fits automotive battery-monitoring circuits because its supply range extends to 36 V and the LM2903-Q1 family is AEC-Q100 qualified in Grade 0 and Grade 1. Its two independent differential channels can evaluate separate charge or discharge thresholds. Open-collector outputs can pull a controller input or fault line low, while external pull-up resistors establish the logic-high state. The 2 kV ESD rating supports robust design, although the final circuit still needs transient suppression, input common-mode verification, and confirmation of the required automotive temperature grade.
پیشنهادی
Automotive Overvoltage and Undervoltage Detection
A pair of LM2903AVQPWRG4Q1 channels can implement independent overvoltage and undervoltage indications around a system rail. Place the rail or divided sensing voltage against a precision reference at the comparator inputs, then use the open-collector outputs to alert a microcontroller through suitable pull-ups. The device's 2 V to 36 V single-supply range supports higher-energy automotive systems, while 0.4 mA typical supply current per comparator helps limit standing load. Protection components must be selected separately to withstand automotive transients and maintain the inputs within the common-mode limits.
پیشنهادی
Industrial Sensor Limit Detection
The LM2903AVQPWRG4Q1 can compare a scaled sensor signal with a reference to detect an upper or lower operating limit. Its differential inputs allow the sensor and reference to share a common ground, and its 1.3 µs propagation delay suits many monitoring and control loops. The 8-pin TSSOP package supports compact placement, while two independent channels reduce the component count for dual-limit detection. Because the output is open collector, a pull-up resistor and any interface-device current limit must be evaluated, and the sensor signal must remain within the comparator's permitted common-mode range.
پیشنهادی
Window Comparator Fault Detection
Two LM2903AVQPWRG4Q1 channels can form a window detector by comparing an input against lower and upper reference limits and combining their open-collector states externally. The device is appropriate when a fault signal must remain active only while a measured voltage lies outside the acceptable range. Each channel is independent, permitting separate references and hysteresis networks. With a maximum supply of 36 V, the comparator can also monitor higher-voltage systems after suitable input attenuation. Pull-up resistor selection, logic-state interpretation, input common-mode range, and automotive qualification must be confirmed before implementation.
پیشنهادی
Power-Supply Sequencing and Fault Logic
LM2903AVQPWRG4Q1 channels can monitor divided power-rail voltages and provide open-collector fault indications for sequencing controllers. The wide supply range supports systems operating up to 36 V, while the two-channel architecture permits independent checks of two rails. An external pull-up resistor allows each fault output to interface with the voltage domain used by a controller or logic gate. Designers should account for output rise time, controller input leakage, reference accuracy, and input attenuation. The 2 kV ESD rating improves robustness but does not replace the transient-protection design required for harsh automotive environments.
پیشنهادی
Complementary System Interlock
The two independent comparators in LM2903AVQPWRG4Q1 can generate complementary permission signals for a two-condition interlock. For example, one channel can verify that a safety-related voltage is above a minimum threshold while the other verifies a second condition below a maximum threshold. Their open-collector outputs can be pulled up separately or connected to a suitable logic network, depending on the required fault-safe polarity. The 1.3 µs propagation delay supports relatively prompt decisions, while the 50 nA maximum input bias current reduces reference-loading effects. Final validation must cover logic polarity, system timing, temperature grade, and failure-mode analysis.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای LM2903AVQPWRG4Q1 — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | LM2903VQPWRG4Q1 | LM2903AVQPWRG4 | LM2903PWR | LM2903B-Q1 | LM393APWR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP | 8-pin TSSOP |
| Comparator Channels | 2 | 2 | 2 | 2 | 2 | 2 |
| Output Type | Open-collector | Open-drain | Open-collector | Open-collector | Open-collector | Open-collector |
تفاوتهای کلیدی
- Automotive qualification in the selected ordering (در مقابلLM2903AVQPWRG4)
- 36 V supply capability (در مقابلLM2903PWR)
- Next-generation automotive family improvements (در مقابلLM2903B-Q1)
یادداشتهای طراحی
Choose each output pull-up resistor against the target logic voltage, output leakage, pull-up current, input capacitance, and required rise time. Open-collector outputs do not source the high state independently. Also verify that the pull-up rail and output node remain within the device's absolute-maximum limits. In a dual-supply design, account for the separate negative-supply connection and ensure no output pull-up introduces an unintended current path.
Do not treat an 8-pin TSSOP footprint match as sufficient proof of interchangeability. Compare the LM2903-Q1 ordering table, input common-mode limits, offset voltage, supply current, propagation delay, output behavior, temperature grade, and AEC-Q100 status. LM2903AVQPWRG4Q1, LM2903VQPWRG4Q1, LM2903AVQPWRG4, LM2903PWR, and LM393APWR share the listed package format but represent different ordering requirements.
Keep comparator input traces short and route them away from switching nodes and high-current paths. Place the bias or reference network close to the relevant input pins, and provide a low-impedance ground return for both channels. The two comparators are independent but share package power and ground, so supply and ground routing must avoid coupling one channel's switching event into the other channel's decision.
Do not leave either differential input floating. Unused channels should be disabled by tying both inputs to a defined common-mode voltage and leaving the open-collector output in a defined state with an appropriate pull-up. Also account for the 50 nA maximum input bias current when selecting high-value reference dividers, because its effect on threshold error increases with resistance.
اطلاعات انطباق
Texas Instruments identifies LM2903-Q1 as AEC-Q100 qualified in Grade 0 and Grade 1. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly stated.