Texas Instruments

LM2903PS-MAND - Dual Open-Collector Comparator | Texas Instruments

Артикул: LM2903PS-MAND ✓ Активен
Single supply or split supply Vdss 8-pin small-outline package Package
MOQ: 1 |

LM2903PS-MAND Обзор

The Texas Instruments LM2903PS-MAND is a dual differential comparator with two independent comparator channels, an open-collector output architecture, and an 8-pin small-outline package. The LM2903 family is designed for general-purpose signal comparison and can operate from a single supply while also supporting split-supply arrangements. Its input common-mode range includes ground, making it useful in battery-powered and mixed-polarity systems where inputs may approach the lower supply rail.

A comparator is an analog integrated circuit that compares two input voltages and produces a logic-level result indicating which input is higher. Within the semiconductor hierarchy, a comparator belongs to the broader operational-amplifier and signal-conditioning family, with the LM2903 providing two independently usable channels in one monolithic package. This integration reduces the component count and package footprint in threshold detection, sensing, and control circuits.

The primary features of the LM2903PS-MAND are its dual-channel configuration, open-collector outputs, ground-referenced input capability, and ability to operate from either a single or split supply. Open-collector outputs are useful when the output must pull up to a system-specific voltage, interface with TTL or CMOS logic, or support wired-AND behavior. Each channel may also be used independently, allowing one device to compare two different signal pairs.

In practical signal-path terms, the comparator evaluates a voltage present at its inverting or non-inverting input against a reference or threshold established by the other input. Its wide common-mode capability allows direct sensing of low-level signals referenced to ground. Designers should account for input and output timing, pull-up requirements, supply behavior, and the transition characteristics listed in the manufacturer datasheet when setting switching thresholds or driving downstream circuitry.

Typical applications include battery threshold monitoring, sensor signal conditioning, window comparators, overvoltage detection, industrial control interfaces, and general-purpose digital decision logic. The two channels are particularly useful when a design needs two related comparisons, such as monitoring both a rising threshold and a falling threshold, or detecting upper and lower limits around a nominal operating point.

For implementation, connect an appropriate pull-up resistor to each open-collector output and account for the resulting rise time when operating speed matters. Keep input and output routing compact to reduce sensitivity to interference, and confirm the device's operating-temperature, supply-voltage, and input-voltage limits against the requirements of the target application before releasing the PCB design.

This product overview combines the device's core functionality with practical guidance on open-collector interfaces, dual-channel usage, threshold detection, and drop-in alternatives. It also provides comparison-focused engineering information intended to make component selection and PCB reuse faster than a distributor specification summary alone.

Аналоги без доработки для LM2903PS-MAND — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с LM2903PS-MAND (тот же форм-фактор и посадочное место) — отличается по Package, Supply Current, Comparator Type, Output Type, Input Bias Current.

Texas Instruments
Package: 8-pin SOIC (D)
Supply Current: 200 µA per comparator
Output Type: Open-collector
Сравнить с LM2903PS-MAND →
Texas Instruments
Package: 8-pin SOIC, 0.154 inch (3.90 mm) width
Output Type: Open-collector
Сравнить с LM2903PS-MAND →
Texas Instruments
Package: 8-pin SOIC
Supply Current: 1 mA
Output Type: Open-collector
Сравнить с LM2903PS-MAND →
STMicroelectronics
Package: 8-pin SOIC
Supply Current: 0.4 mA typical
Comparator Type: Dual differential voltage comparator
Сравнить с LM2903PS-MAND →

LM2903PS

✅ Прямая замена
📦 8-pin SO small-outline package
Same 2-channel count and open-collector architecture; 0% identified channel-count difference, with the MAND suffix as the target-specific ordering distinction.

📋 Справочный аналог (нет в каталоге)

LM2903YDT

✅ Прямая замена
STMicroelectronics
📦 8-pin SO small-outline package
Dual differential voltage comparator · 2 channels · +2 V to +36 V · ±1 V to ±18 V · 0.4 mA typical · 1 mW at +5 V · 25 nA typical · ±5 nA typical

Уточнить цену

Открыть даташит →

LM2903DG4

✅ Прямая замена
Texas Instruments
📦 8-pin SO small-outline package
Dual differential comparator · 2 channels · Single or dual supply · 32 V · 30 V · 0.4 mA typical per comparator · Open-collector · TTL, MOS, and CMOS compatible

Уточнить цену

Открыть даташит →

LM2903M

✅ Прямая замена
Texas Instruments
📦 8-pin SO small-outline package
Dual differential comparator · 2 · 2 V to 36 V · Open-collector · Rail-to-rail · 1.5 microseconds · 1 mA · CMOS, DTL, ECL, MOS, TTL

Уточнить цену

Открыть даташит →

LM2903BIDR

✅ Прямая замена
Texas Instruments
📦 8-pin SO small-outline package
Dual differential comparator · 2 channels · Open-collector · 36 V · 2 V · 0.37 mV · 3.5 nA · 200 µA per comparator

Уточнить цену

Открыть даташит →

LM2903PS-MAND Максимальные параметры и электрические характеристики

Comparator Type Dual differential comparator
Number of Channels 2 channels
Output Architecture Open collector
Package Type 8-pin small-outline package
Число выводов 8 pins
Тип монтажа Surface mount
Supply Configuration Single supply or split supply
Input Common-Mode Range Includes ground
Logic Interface TTL and CMOS compatible

Руководство по цоколевке LM2903PS-MAND в корпусе 8-pin small-outline package

Цоколевка для LM2903PS-MAND (корпус 8-pin small-outline package). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 8-pin small-outline package для LM2903PS-MAND

Нет подробных данных о распиновке для LM2903PS-MAND.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

LM2903PS-MAND подходит для 6 применениеs: Battery Threshold Monitoring, Industrial Sensor Conditioning, Overvoltage and Undervoltage Detection, Window Comparator Control, TTL and CMOS Logic Interfacing, Embedded Control Decision Logic.

⚡

Battery Threshold Monitoring

The LM2903PS-MAND fits battery systems that need ground-referenced threshold detection because its LM2903 family supports single-supply operation and an input common-mode range that includes ground. Two independent comparator channels can monitor rising and falling thresholds without adding a second package. Each channel compares a battery-derived voltage against a reference and switches its open-collector output when the threshold is crossed. Add pull-up resistors to the required logic rail, and verify that the battery voltage, reference levels, temperature range, and fault conditions remain within the datasheet limits.

🏭

Industrial Sensor Conditioning

The LM2903PS-MAND is useful when a low-level sensor signal must become a logic decision close to the sensing location. Its 2 differential channels can compare a sensor-derived voltage with an adjustable upper or lower threshold, reducing the need to send weak analog information across longer board traces. The ground-inclusive common-mode range supports sensors referenced to the lower supply rail, while the open-collector output can pull up to the voltage used by the downstream industrial logic. Choose pull-up values that balance current consumption against switching speed.

🖥️

Overvoltage and Undervoltage Detection

The LM2903PS-MAND can implement a two-channel voltage supervisor for systems that need both an upper and a lower operating limit. One comparator handles an overvoltage event while the second handles an undervoltage event, reducing discrete logic overhead. Differential inputs support a reference-versus-signal comparison, and the open-collector outputs can be pulled up to the supervisor's logic rail or combined for a common fault indication. Confirm propagation delay, input thresholds, output sink current, and the system's permissible fault response time before using the comparator as a protection device.

🔧

Window Comparator Control

The 2 independent channels in the LM2903PS-MAND make it a natural fit for a window comparator that detects whether a monitored voltage is below a lower limit, within an acceptable range, or above an upper limit. One channel can reference the lower threshold and the other the upper threshold, with their outputs interpreted by control logic. The differential input arrangement permits threshold comparisons around a shared reference voltage. Because the outputs are open collector, pull-ups to the chosen control voltage provide the desired active state and avoid tying the device to a fixed logic level.

📱

TTL and CMOS Logic Interfacing

The LM2903PS-MAND can bridge an analog decision to TTL or CMOS logic because the LM2903 family is described as compatible with both interface families. Its open-collector output sinks current from an external pull-up resistor, allowing the output voltage to be set independently of the comparator supply. This arrangement is useful when a controller uses a different logic voltage from the analog section. Size the pull-up for the required fan-out and transition speed, and check absolute maximum input and output conditions in the manufacturer documentation.

🧩

Embedded Control Decision Logic

The LM2903PS-MAND can perform fast local decisions in embedded equipment where a controller should not be burdened with continuously evaluating a slowly changing analog condition. One channel can indicate that a signal has crossed a reference, while the second can monitor a complementary condition or a second sensor. The 8-pin surface-mount package supports compact layouts, and open-collector outputs permit wired fault signaling with suitable pull-ups. Ensure the comparator's timing, common-mode range, supply range, and temperature limits match the enclosure and operating environment.

What is the LM2903PS-MAND?
The LM2903PS-MAND is a Texas Instruments dual differential comparator with two comparator channels, open-collector outputs, and an 8-pin small-outline package. According to the Texas Instruments LM2903 product page, the LM2903 family is a general-purpose comparator suitable for single-supply or split-supply operation. Its ground-inclusive input common-mode range is particularly useful for low-level signal and battery-powered threshold detection.
What are the key specifications of LM2903PS-MAND that engineers should know?
The LM2903PS-MAND provides 2 independent differential comparator channels in an 8-pin surface-mount package, using open-collector outputs. According to the Texas Instruments LM2903 product page and distributor product descriptions, it supports single- and split-supply operation, includes ground in its input common-mode range, and can interface with TTL and CMOS logic. Confirm supply limits, timing, and thermal ratings in the manufacturer datasheet before finalizing a design.
Where can I download the LM2903PS-MAND datasheet PDF?
The official LM2903PS-MAND documentation is reached through the Texas Instruments LM2903 product page, which links the family datasheet and ordering information. The indexed MAND datasheet copy identifies the same LM2903PS device and describes it as a dual differential comparator. Use the Texas Instruments page as the authoritative source for electrical limits, pin descriptions, timing, and ordering codes.
Where can I find the LM2903PS-MAND pinout?
The LM2903PS-MAND uses an 8-pin small-outline package, and its numbered pin assignments should be taken from the pin-description table in the Texas Instruments LM2903 datasheet. The product-level search description confirms the 8-pin package but does not provide a trustworthy pin-by-pin transcription. Use that table when assigning input pins, output pins, supply connections, and the two ground connections.
How does an open-collector comparator output work?
An open-collector output actively pulls the output node toward ground but does not actively drive it high. According to the Texas Instruments LM2903 product description, the LM2903PS-MAND can interface with TTL and CMOS logic. Add a pull-up resistor to the required logic voltage, account for its resistance when sizing sink current, and consider the RC rise time when the output must switch rapidly.
Can LM2903PS-MAND be powered from a single supply?
Yes, the LM2903PS-MAND can operate from a single supply as well as from split supplies. The Texas Instruments LM2903 family description specifically identifies both operating arrangements. Its input common-mode range includes ground, which helps when sensing signals near the lower supply rail. The accepted supply and input ranges must still be checked against the datasheet for the exact temperature and grade.
When should I choose LM2903PS-MAND instead of a single comparator?
Choose the LM2903PS-MAND when the design needs two independent comparisons and can allocate one 8-pin package. Its 2-channel implementation can replace two separate single comparators while preserving independent inputs and outputs. Select a single comparator instead when only one threshold function is needed and board area, unused-channel shutdown, or cost is more important than integration.
What is LM2903PS-MAND vs LM2903M for a drop-in design?
The LM2903PS-MAND and LM2903M are both dual-comparator families associated with the same open-collector, 8-pin class, but manufacturer-specific electrical limits and orderable suffixes can differ. A cross-reference comparison identifies LM2903M from onsemi as a candidate for comparison with LM2903PS. Confirm supply range, input common-mode limits, propagation delay, and the exact SO-8 pin map before treating either part as a direct substitution.
Is LM2903PS-MAND suitable for battery threshold monitoring?
The LM2903PS-MAND is suitable for many battery threshold-monitoring circuits because it supports single-supply operation, has a ground-inclusive input common-mode range, and offers low-power operation characteristics described for the LM2903 family. Its 2 channels can implement dual-limit or window monitoring. The input thresholds must remain inside the comparator's common-mode range and within the supply limits for the intended battery chemistry.
What is the best drop-in replacement for LM2903PS-MAND?
The closest same-family starting point is the Texas Instruments LM2903PS, while the onsemi LM2903M and 3PEAK LM2903 are cross-brand candidates worth checking. However, a drop-in decision requires identical SO-8 pin assignment and acceptable differences in supply range, common-mode range, timing, and output current. Review each manufacturer's current datasheet and orderable package suffix before replacing LM2903PS-MAND.
What can replace LM2903PS-MAND?
Potential replacements include the Texas Instruments LM2903PS, the onsemi LM2903M, and the 3PEAK LM2903 because each is associated with the dual LM2903 comparator family. Treat these as candidates rather than unconditional substitutions. Verify that the replacement uses the required 8-pin SO footprint, preserves the open-collector output arrangement, and meets the application’s supply, common-mode, timing, and temperature requirements.
What is the best onsemi equivalent for LM2903PS-MAND?
The onsemi LM2903M is the best cross-brand candidate identified by the available LM2903 cross-reference comparison. It belongs to the same dual-comparator product family, but final substitution still depends on the exact pinout, package suffix, supply range, input common-mode range, and propagation delay. The LM2903PS-MAND requires an 8-pin SO land pattern, so an SO-8 orderable onsemi version must be selected.
Where can I buy LM2903PS-MAND online?
The LM2903PS-MAND can be requested through the Request a Quote form on this page, where the exact suffix and required quantity can be reviewed with the supply team. Current price, stock, and lead time can change independently of the product record, so obtain a current quotation rather than relying on an indexed listing. The manufacturer product page remains the authoritative reference for device status and documentation.
What is the price of LM2903PS-MAND?
Use the Request a Quote form on this page for the current LM2903PS-MAND quotation. The structured pricing area should reflect current market evidence when a qualifying quantity-break listing is available, but no such explicit price table is attached to this product record. Quote requests should include the required quantity, shipment destination, and whether factory-reel, cut-tape, or other approved packing is required.
What is the lead time for LM2903PS-MAND and is it in stock?
Request current lead time and stock status through the Request a Quote form on this page because availability for the exact LM2903PS-MAND suffix is quote-dependent. The Texas Instruments LM2903 family is listed as active on the manufacturer product page, but family availability does not by itself guarantee every package and customer-specific order code is immediately on hand. Include target quantity and delivery schedule with the request.

Справочные инженерные данные для LM2903PS-MAND — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose LM2903PS-MAND when a compact 8-pin SO solution is needed for two independent threshold comparisons, particularly with a ground-referenced input and an open-collector interface. It is appropriate for battery monitoring, window detection, industrial sensing, and local control decisions where single- or split-supply operation is useful. LM2903PS is the closest Texas Instruments ordering option when the MAND-specific identifier is not required. Consider onsemi LM2903M or 3PEAK LM2903 only after checking the exact SO-8 pinout, supply limits, common-mode range, propagation delay, and temperature grade. For designs using push-pull outputs, rail-to-rail input behavior, or a different package, use a comparator family whose verified electrical characteristics explicitly satisfy those requirements rather than assuming functional equivalence from the dual-comparator description.

Сравнение с аналогами

Параметр Этот товар LM2903PS LM2903YDT LM2903DG LM2903M LM2903
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments onsemi 3PEAK
Package 8-pin SO small-outline package 8-pin SO small-outline package 8-pin SO small-outline package 8-pin SO small-outline package 8-pin SO small-outline package 8-pin SO small-outline package
Comparator Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels

Ключевые отличия

  • Dual independent comparator channels in one package (против LM2903PS)
  • Single-supply and split-supply operating capability (против LM2903M)
  • Ground-inclusive input common-mode operation (против LM2903)
  • Open-collector outputs for flexible logic interfacing (против LM2903YDT)

Заметки по проектированию

Do not treat an open-collector output as a push-pull logic output. It can sink current, but it requires an external pull-up resistor to establish a high voltage. Select the pull-up voltage from the receiving logic system, verify that the comparator can sink the resulting current, and account for the resistor-capacitance rise time when the downstream circuit requires fast transitions.

Place each pull-up resistor close to the corresponding output and keep the open-collector node compact. Long traces can increase capacitance and slow the rising edge created by the pull-up. Route sensitive comparison inputs away from switching nodes, pull-up current paths, and other high-current conductors to reduce false threshold transitions and maintain predictable comparator behavior.

The two comparator channels may not be interchangeable with respect to unused-channel behavior. Review the manufacturer guidance for an unused input and output before leaving one channel unused, and do not allow an unused input to float. Confirm the permitted input and supply ranges for the actual operating temperature rather than relying only on the nominal family description.

Set reference thresholds with attention to input offset voltage and signal noise. If a slow sensor signal crosses a threshold repeatedly, add hysteresis with positive feedback around the relevant channel, while ensuring the feedback network does not disturb the intended common-mode range. Use the propagation-delay information in the datasheet when filtering or debouncing around the decision point.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer family and distributor descriptions do not provide explicit compliance statements for the MAND ordering code. AEC-Q100 status is not applicable because this is a general-purpose comparator rather than an automotive-qualified ordering option.

Данные проверены: 2026-11-09 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

lm2903p datasheet LM2903PS-MAND datasheet LM2903PS-MAND pinout LM2903PS-MAND datasheet pdf LM2903PS-MAND equivalent LM2903PS-MAND replacement LM2903PS-MAND cross reference LM2903PS-MAND vs LM2903M LM2903PS-MAND footprint LM2903PS-MAND price LM2903PS-MAND stock Texas Instruments LM2903PS-MAND LM2903PS open collector comparator LM2903PS battery threshold monitoring LM2903PS dual comparator application circuit

Связанные компоненты & термины

Texas Instruments LM2903PS-MAND LM2903PS LM2903YDT LM2903DG onsemi onsemi LM2903M 3PEAK 3PEAK LM2903 LM2903 family dual differential comparator voltage comparator analog comparator signal-conditioning IC semiconductor open-collector output single-supply operation split-supply operation input common-mode range TTL CMOS 8-pin SO small-outline package surface-mount package battery threshold monitoring industrial sensor conditioning
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ