Texas Instruments

LM358PWRG4-JF - Dual 30V 700kHz Op Amp | Texas Instruments

Артикул: LM358PWRG4-JF ✓ Активен
30 V Vdss 8-pin TSSOP (PW) Package
MOQ: 1 |

LM358PWRG4-JF Обзор

Texas Instruments LM358PWRG4-JF is a dual, general-purpose bipolar operational amplifier with a 30 V power-supply rating, 700 kHz gain-bandwidth product, and two amplifier circuits in an 8-pin TSSOP (PW) package. The device operates from single or dual supplies, with listed operating ratings of 0°C to 70°C and a maximum input offset voltage of 9,000 µV.

An operational amplifier is an analog semiconductor that amplifies the voltage difference between its two inputs. The LM358 belongs to the dual-operational-amplifier hierarchy within the broader voltage-feedback amplifier, analog IC, and semiconductor categories. Its two channels may be used independently, or one channel can provide amplification while the other performs a related task such as buffering, level shifting, or active filtering.

The LM358PWRG4-JF provides a 30 V maximum supply voltage, 700 kHz gain-bandwidth product, and bipolar input and output stages. A 700 kHz bandwidth supports general-purpose signal conditioning across audio, industrial-control, instrumentation, and data-acquisition circuits. The 9,000 µV maximum input offset voltage is appropriate for applications in which moderate DC offset does not dominate the measurement or control accuracy.

The dual configuration offers better functional density than two single amplifiers. Its 8-pin TSSOP package supports compact surface-mount assembly, while the two amplifier sections make it practical to process related signals with one component. Designers should still account for common-mode range, output swing, input bias current, stability, noise, and supply bypass requirements when defining an exact application.

Typical uses include low-frequency audio amplification, sensor-signal conditioning, DC error amplification, active filtering, comparators with open-collector outputs, and general industrial analog interfaces. The wide 30 V supply capability is useful where the signal chain operates above conventional 5 V or 12 V rails, provided the common-mode and output-swing limits of the selected amplifier remain satisfied.

For implementation, decouple each supply rail close to the device with suitable bypass capacitance and route feedback components to minimize parasitic coupling. Keep output loads within the specified range, avoid violating common-mode limits, and check stability when driving capacitive loads. The 0°C to 70°C rating makes this ordering appropriate for commercial-temperature environments rather than extended industrial or automotive temperature ranges.

This page combines the manufacturer identification, distributor technical attributes, package details, replacement considerations, and practical application guidance for engineers evaluating the LM358PWRG4-JF. It also highlights the need to distinguish electrically similar LM358 order codes from confirmed, pin-compatible alternatives before changing a released PCB design.

Аналоги без доработки для LM358PWRG4-JF — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с LM358PWRG4-JF (тот же форм-фактор и посадочное место) — отличается по Package, Amplifier Type, Maximum Supply Voltage, Packaging, Number of Amplifiers.

Texas Instruments
Package: 8-TSSOP (PW), 0.173 in / 4.40 mm width
Amplifier Type: General Purpose
Packaging: Tape and Reel (TR)
Сравнить с LM358PWRG4-JF →
Texas Instruments
Package: 8-TSSOP
Amplifier Type: General Purpose
Maximum Supply Voltage: 16 V
Сравнить с LM358PWRG4-JF →
Texas Instruments
Package: 8-pin TSSOP
Amplifier Type: General-purpose dual operational amplifier
Packaging: Tape and reel
Сравнить с LM358PWRG4-JF →

LM358PWRG4

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 8-pin TSSOP (PW)
General-purpose dual operational amplifier · 2 circuits · 2 amplifiers · 30 V · 3 V · 700 kHz · 0.3 V/us · 0.7 mA per amplifier

Уточнить цену

Открыть даташит →

LM358PWRG3

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 8-pin TSSOP (PW)
General Purpose · 2 circuits · 700 kHz · 16 V · 8-TSSOP · 4.40 mm · 0.173 inch · Tape and Reel (TR)

Уточнить цену

Открыть даташит →

LM2904PWRG3

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 8-pin TSSOP (PW)
General Purpose · 2 circuits · Two independent, frequency-compensated operational amplifiers · 26 V · 700 kHz · 0.3 V/us · 0.7 mA · Single supply or split supply

Уточнить цену

Открыть даташит →

LM358PWRG4-JF Максимальные параметры и электрические характеристики

Amplifier Type Dual general-purpose operational amplifier
Number of Circuits 2 circuits
Maximum Supply Voltage 30 V
Supply Voltage Range 3 V to 30 V
Single-Supply Output Voltage ±16 V
Dual-Supply Output Voltage ±32 V
Gain-Bandwidth Product 700 kHz
Input Offset Voltage 9,000 µV maximum
Тип транзистора Bipolar input and output
Диапазон рабочих температур 0°C to 70°C
Корпус 8-pin TSSOP (PW)
Тип монтажа Surface mount
Supply Configuration Single or dual supply

Руководство по цоколевке LM358PWRG4-JF в корпусе 8-pin tssop (pw)

Цоколевка для LM358PWRG4-JF (корпус 8-pin tssop (pw)). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 8-pin tssop (pw) для LM358PWRG4-JF

Нет подробных данных о распиновке для LM358PWRG4-JF.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

LM358PWRG4-JF подходит для 6 применениеs: Industrial Sensor Signal Conditioning, Data Acquisition Front End, Audio Preamplifier, Active Filtering and Control Loops, Power-Supply Feedback and Monitoring, Portable and Embedded Analog Interface.

🏭

Industrial Sensor Signal Conditioning

The LM358PWRG4-JF fits low-frequency sensor front ends that amplify weak signals before conversion or control. Its two bipolar amplifier channels can handle two related sensor channels, while the 30 V supply capability supports industrial interfaces operating above 5 V. The 700 kHz gain-bandwidth product is adequate for many temperature, position, and level sensors with moderate bandwidth. Designers should verify input common-mode range, offset error, bias current, and sensor output range before fixing the gain. In practice, the 9,000 µV maximum input offset can be significant with high-impedance or slow sensors, so the application may need calibration, chopping, or a more precise amplifier.

📊

Data Acquisition Front End

The LM358PWRG4-JF can provide differential or single-ended amplification for low-rate data-acquisition channels, with one amplifier handling excitation or reference buffering and the other conditioning the measured signal. A 700 kHz gain-bandwidth product supports sensors and signals well below megahertz frequencies, while the 3 V to 30 V supply range allows interface design around multiple rails. The key design trade-off is DC accuracy: the listed 9,000 µV maximum offset may create unacceptable error at very small full-scale ranges. Use calibration, differential arrangement, and input filtering where offset or drift matters, while keeping the amplifier inside its common-mode and output-swing limits.

🎧

Audio Preamplifier

The LM358PWRG4-JF is appropriate for modest audio preamplifier stages where a dual general-purpose amplifier, 30 V capability, and 700 kHz bandwidth are more important than premium noise or offset performance. One channel can amplify an audio input while the other provides gain or a buffer, reducing the footprint compared with two separate devices. The 9,000 µV maximum input offset is relatively high for high-fidelity audio, and the open-circuit output behavior must be considered in the selected topology. Coupling capacitors, input bias paths, output loading, and supply decoupling should be evaluated against the manufacturer characteristics before the stage is released.

🔧

Active Filtering and Control Loops

The LM358PWRG4-JF can implement active low-pass filters, integrators, and error amplifiers in 0°C-to-70°C industrial systems. Its 700 kHz gain-bandwidth product gives ample closed-loop bandwidth for many slow control loops, and the dual channel permits filtering in one stage while the other performs feedback or monitoring. Component tolerances and the amplifier's input-offset behavior can influence filter accuracy, particularly in narrow-band or high-Q implementations. Keep passive values practical, place compensation and feedback parts close to the device, and verify closed-loop stability across the complete frequency range rather than relying only on the gain-bandwidth figure.

⚡

Power-Supply Feedback and Monitoring

The LM358PWRG4-JF is useful for amplifier-based power-supply feedback, current monitoring, and threshold or comparator-style functions where the input signals remain inside the common-mode range. Its dual architecture can monitor two conditions or combine a sensing amplifier with an output driver. The 30 V rating supports higher-voltage supervisory circuitry than 5 V-only parts, while the 700 kHz bandwidth handles ripple and transient signals commonly encountered in slow power systems. Designers must account for the allowed output swing, input bias current, output-current capability, and whether an external pull-up or output network is required for the intended logic or drive load.

📱

Portable and Embedded Analog Interface

The LM358PWRG4-JF can serve as a dual analog interface in embedded and portable products requiring more headroom than a 3.3 V or 5 V op amp. Its 8-pin TSSOP package supports compact surface-mount layouts, and the 30 V maximum supply rating provides flexibility for mixed-voltage systems. The operating-temperature range of 0°C to 70°C suits consumer and commercial ambient conditions but not extended-temperature environments. Board planning should reserve local bypass capacitance, maintain short feedback paths, and check whether unused amplifier inputs require biasing. Verify the actual system rail, source impedance, capacitive loading, and ESD protection before assigning the part to a sensitive embedded interface.

What is the LM358PWRG4-JF?
The LM358PWRG4-JF is a Texas Instruments dual, general-purpose bipolar operational amplifier rated for supplies up to 30 V. According to the Texas Instruments product page, the device provides two amplifier circuits, a 700 kHz gain-bandwidth product, and an 8-pin TSSOP package. The listed operating-temperature range is 0°C to 70°C, making it suitable for commercial-temperature signal-conditioning, buffering, filtering, and control applications.
What are the key specifications of LM358PWRG4-JF that engineers should know?
The principal LM358PWRG4-JF specifications are a 30 V maximum supply voltage, 700 kHz gain-bandwidth product, two amplifier circuits, 9,000 µV maximum input offset voltage, and an 8-pin TSSOP package. The distributor and manufacturer listings also identify bipolar input and output stages, operating temperatures from 0°C to 70°C, and output capability of ±16 V from a single supply or ±32 V from a dual supply.
Can LM358PWRG4-JF operate from a single supply?
Yes, the LM358PWRG4-JF can operate from a single supply, with listed output capability of ±16 V around the midpoint of the supply rail. The device can also operate from dual supplies, with listed output capability of ±32 V. The technical listing identifies a 3 V to 30 V supply range, but a particular design must still verify its actual input common-mode range and output swing at the selected rail voltage.
Where can I download the LM358PWRG4-JF datasheet PDF?
The official LM358PWRG4-JF datasheet should be obtained from the Texas Instruments product page at https://www.ti.com/product/LM358/part-details/LM358PWRG4-JF. That page identifies the exact 8-pin TSSOP ordering code and provides manufacturer documentation. Third-party PDF indexes may mirror manufacturer material, but the Texas Instruments page is the preferred starting point for electrical characteristics, pin assignments, and test conditions.
Where can I find the LM358PWRG4-JF pinout?
The LM358PWRG4-JF pin assignment is published in the Texas Instruments LM358 datasheet and must be assigned using the 8-pin TSSOP (PW) drawing. The verified technical listing confirms that this ordering code uses eight pins, but it does not enumerate the individual pin names. Therefore, use the manufacturer pin-description table for each amplifier's inputs, output, supply pins, and no-connect positions before laying out or inspecting a PCB.
Is the LM358PWRG4-JF suitable for audio applications?
The LM358PWRG4-JF is suitable for many low-frequency audio and general analog tasks because it combines a 700 kHz gain-bandwidth product with operation from supplies up to 30 V. Its 9,000 µV maximum input offset voltage is comparatively high for precision audio paths, so it is better suited to ordinary signal amplification than demanding high-fidelity correction stages. Verify output swing, noise, and channel-matching requirements in the final signal chain.
What is the best drop-in replacement for LM358PWRG4-JF?
The closest confirmed same-family drop-in choices are LM358PWRG4 and LM358PWR because they retain the LM358 electrical function and 8-pin TSSOP configuration associated with the target. A release-qualified purchase should still compare the exact suffix, temperature grade, offset limit, supply behavior, and manufacturer datasheet. LM2904PWR offers a related 8-pin TSSOP option, but its temperature and exact performance ratings must be checked before substitution.
What can replace the LM358PWRG4-JF on the same PCB?
LM358PWRG4 and LM358PWR are the primary same-family replacements for the LM358PWRG4-JF because they use the same 8-pin TSSOP format and preserve the dual general-purpose bipolar amplifier architecture. LM2904PWR is another related candidate, but it represents a different temperature and product positioning. Confirm pin orientation and all critical AC, DC, common-mode, and output-stage parameters against the relevant manufacturer datasheet before production use.
What is the difference between LM358PWRG4-JF and LM358PWRG4?
The LM358PWRG4-JF and LM358PWRG4 are closely related 8-pin TSSOP LM358 order codes with matching dual-amplifier architecture. The exact manufacturing or customer-processing meaning of the -JF suffix is not stated in the verified technical listing. Treat the two as mechanically similar same-family candidates, but verify the complete ordering table, lot requirements, temperature grade, and quality documentation before approving either part as a release substitute.
When should I choose LM358PWRG4-JF over LM2904PWR?
Choose the LM358PWRG4-JF when the required product specification includes the 0°C to 70°C commercial operating range and the exact Texas Instruments ordering code. Consider LM2904PWR when its wider temperature rating and other electrical limits better satisfy the design while retaining the compatible TSSOP footprint. The selection should be based on a full comparison of temperature range, offset, bias current, bandwidth, slew rate, common-mode range, and output behavior.
Is LM358PWRG4-JF the same as LM2904PWR?
No, the LM358PWRG4-JF and LM2904PWR are related dual operational amplifiers, but they are not identical order codes or identical product specifications. The LM358PWRG4-JF is identified as a 30 V, 700 kHz device rated from 0°C to 70°C, while the LM2904 is a distinct LM358-family ordering option. Treat LM2904PWR as a potential pin-compatible alternative only after reviewing its exact manufacturer datasheet.
Where can I buy LM358PWRG4-JF online?
Use the Request a Quote form on this XAIPART product page to request LM358PWRG4-JF pricing, current availability, minimum order quantity, and lead time. The listing confirms the exact Texas Instruments part number and 8-pin TSSOP configuration. A purchasing request should identify the required reel or other packing format, quantity, and quality or traceability requirements so the quotation can be matched to the intended production use.
What is the price of LM358PWRG4-JF?
Submit the Request a Quote form on this page for the current LM358PWRG4-JF quotation. Pricing can vary with quantity, packing method, order value, and supply conditions, so a static figure can become inaccurate. Include your annual usage, target quantity, accepted delivery date, and required packaging to receive a commercially relevant response for the exact 8-pin TSSOP ordering code.
What is the lead time and stock status for LM358PWRG4-JF?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this XAIPART page. The verified manufacturer and distributor listings identify the component, but they do not establish a fixed current inventory quantity or guaranteed delivery interval for this specific quotation. Supply timing should therefore be confirmed against the requested quantity and packing format rather than inferred from a distributor product page.
Does LM358PWRG4-JF support industrial temperature requirements?
The LM358PWRG4-JF is listed for an operating-temperature range of 0°C to 70°C, so it is not an extended-temperature industrial choice based on the stated rating. A design requiring operation below 0°C or above 70°C should select an ordering code explicitly rated for those limits and verify all other electrical parameters. The LM2904 family may offer different temperature positioning, subject to its own datasheet.
Is LM358PWRG4-JF RoHS compliant and AEC-Q100 qualified?
The verified manufacturer and distributor technical listings do not state the RoHS, REACH, or AEC-Q100 status for LM358PWRG4-JF, so those compliance claims cannot be confirmed from this product record. The listed 0°C to 70°C operating range also should not be treated as automotive qualification. Request the current manufacturer compliance and quality documentation for the exact ordering code before using it in regulated or automotive production.

Справочные инженерные данные для LM358PWRG4-JF — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose LM358PWRG4-JF when the released design requires a Texas Instruments LM358 dual operational amplifier in an 8-pin TSSOP package, operation from a supply up to 30 V, and a 700 kHz gain-bandwidth product within a 0°C-to-70°C commercial environment. LM358PWR is the closest general same-family ordering path when the -JF requirement does not apply. LM358PWRG4 is useful when reconciling the two closely related order codes, subject to confirmation of the suffix meaning and quality documentation. Consider LM2904PWR when its wider or different temperature positioning better fits the product, but do not treat it as electrically identical without checking the manufacturer datasheet. For precision, low-offset, low-noise, rail-to-rail, or extended-temperature applications, choose a different amplifier family rather than accepting the LM358's general-purpose performance limits.

Сравнение с аналогами

Параметр Этот товар LM358PWRG4 LM358PWR LM2904PWR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin TSSOP (PW) 8-pin TSSOP (PW) 8-pin TSSOP (PW) 8-pin TSSOP (PW)
Amplifier Configuration Dual Dual Dual Dual

Ключевые отличия

  • Commercial-temperature dual-amplifier option (против LM2904PWR)
  • High-voltage capability with dual integration (против LM358PWR)
  • Direct same-family order-code path (против LM358PWRG4)

Заметки по проектированию

Place the supply bypass capacitor close to the device's positive and ground pins, with a short return path to the ground reference. Keep the amplifier within its 30 V maximum supply rating and confirm the actual common-mode input range at the selected supply voltage. When the input signal can approach either supply rail, use a suitable attenuator or level-shift network rather than assuming the full rail-to-rail range is available.

Route feedback resistors and compensation capacitors directly between their associated pins and the amplifier output with minimal trace area. Keep sensitive input nodes away from power-supply switching nodes and high-current return paths. The 8-pin TSSOP footprint is compact, so assembly tolerances and exposed pad requirements, if any, must be checked against the manufacturer's land pattern before releasing artwork.

Do not treat the 700 kHz gain-bandwidth product as guaranteed usable bandwidth for every gain setting, and do not assume the output can reach either supply rail. Check input bias current with the planned source impedance, evaluate the 9,000 µV maximum offset against the required accuracy, and confirm capacitive-load stability. If the unused channel is present, connect it according to the manufacturer guidance rather than leaving its inputs floating.

The LM358PWRG4-JF is specified from 0°C to 70°C, so verify the enclosure temperature at the device rather than relying on nominal ambient conditions. Keep the TSSOP within the recommended layout and provide adequate copper for power dissipation and temperature uniformity. If one channel drives a load near its capability while the other remains lightly loaded, evaluate channel-to-channel thermal interaction and the complete operating profile.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The verified manufacturer and distributor listings do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not claimed because the listed operating range is 0°C to 70°C.

Данные проверены: 2026-11-09 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

LM358PWRG4-JF datasheet LM358PWRG4-JF specifications Texas Instruments LM358PWRG4-JF LM358PWRG4-JF pinout LM358PWRG4-JF datasheet pdf LM358PWRG4-JF TSSOP-8 LM358PWRG4-JF equivalent LM358PWRG4-JF replacement LM358PWRG4-JF cross reference LM358PWRG4-JF vs LM2904PWR LM358PWRG4-JF price LM358PWRG4-JF stock LM358PWRG4-JF schematic LM358PWRG4-JF 30V 700kHz

Связанные компоненты & термины

Texas Instruments LM358PWRG4-JF LM358PWRG4 LM358PWR LM2904PWR dual operational amplifier operational amplifier voltage-feedback amplifier analog integrated circuit semiconductor bipolar transistor general-purpose amplifier gain-bandwidth product input offset voltage common-mode voltage supply voltage 8-pin TSSOP TSSOP family surface-mount package SMD industrial control sensor signal conditioning data acquisition audio preamplifier active filtering
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ