LM358PWRG4-JF - Dual 30V 700kHz Op Amp | Texas Instruments
Teilenummer: LM358PWRG4-JF ✓ AktivLM358PWRG4-JF Übersicht
An operational amplifier is an analog semiconductor that amplifies the voltage difference between its two inputs. The LM358 belongs to the dual-operational-amplifier hierarchy within the broader voltage-feedback amplifier, analog IC, and semiconductor categories. Its two channels may be used independently, or one channel can provide amplification while the other performs a related task such as buffering, level shifting, or active filtering.
The LM358PWRG4-JF provides a 30 V maximum supply voltage, 700 kHz gain-bandwidth product, and bipolar input and output stages. A 700 kHz bandwidth supports general-purpose signal conditioning across audio, industrial-control, instrumentation, and data-acquisition circuits. The 9,000 µV maximum input offset voltage is appropriate for applications in which moderate DC offset does not dominate the measurement or control accuracy.
The dual configuration offers better functional density than two single amplifiers. Its 8-pin TSSOP package supports compact surface-mount assembly, while the two amplifier sections make it practical to process related signals with one component. Designers should still account for common-mode range, output swing, input bias current, stability, noise, and supply bypass requirements when defining an exact application.
Typical uses include low-frequency audio amplification, sensor-signal conditioning, DC error amplification, active filtering, comparators with open-collector outputs, and general industrial analog interfaces. The wide 30 V supply capability is useful where the signal chain operates above conventional 5 V or 12 V rails, provided the common-mode and output-swing limits of the selected amplifier remain satisfied.
For implementation, decouple each supply rail close to the device with suitable bypass capacitance and route feedback components to minimize parasitic coupling. Keep output loads within the specified range, avoid violating common-mode limits, and check stability when driving capacitive loads. The 0°C to 70°C rating makes this ordering appropriate for commercial-temperature environments rather than extended industrial or automotive temperature ranges.
This page combines the manufacturer identification, distributor technical attributes, package details, replacement considerations, and practical application guidance for engineers evaluating the LM358PWRG4-JF. It also highlights the need to distinguish electrically similar LM358 order codes from confirmed, pin-compatible alternatives before changing a released PCB design.
Drop-in-Alternativen für LM358PWRG4-JF – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit LM358PWRG4-JF (gleiche Bauform und Footprint) – abweichend in Package, Amplifier Type, Maximum Supply Voltage, Packaging, Number of Amplifiers.
LM358PWRG4
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →LM358PWRG3
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →LM2904PWRG3
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →LM358PWRG4-JF Grenzwerte & elektrische Eigenschaften
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Circuits | 2 circuits |
| Maximum Supply Voltage | 30 V |
| Supply Voltage Range | 3 V to 30 V |
| Single-Supply Output Voltage | ±16 V |
| Dual-Supply Output Voltage | ±32 V |
| Gain-Bandwidth Product | 700 kHz |
| Input Offset Voltage | 9,000 µV maximum |
| Transistortyp | Bipolar input and output |
| Betriebstemperaturbereich | 0°C to 70°C |
| Gehäuse | 8-pin TSSOP (PW) |
| Montageart | Surface mount |
| Supply Configuration | Single or dual supply |
LM358PWRG4-JF 8-pin tssop (pw) Pinbelegungsleitfaden
Pinbelegung für LM358PWRG4-JF (8-pin tssop (pw)-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für LM358PWRG4-JF.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
LM358PWRG4-JF ist geeignet für 6 Anwendungs: Industrial Sensor Signal Conditioning, Data Acquisition Front End, Audio Preamplifier, Active Filtering and Control Loops, Power-Supply Feedback and Monitoring, Portable and Embedded Analog Interface.
Industrial Sensor Signal Conditioning
The LM358PWRG4-JF fits low-frequency sensor front ends that amplify weak signals before conversion or control. Its two bipolar amplifier channels can handle two related sensor channels, while the 30 V supply capability supports industrial interfaces operating above 5 V. The 700 kHz gain-bandwidth product is adequate for many temperature, position, and level sensors with moderate bandwidth. Designers should verify input common-mode range, offset error, bias current, and sensor output range before fixing the gain. In practice, the 9,000 µV maximum input offset can be significant with high-impedance or slow sensors, so the application may need calibration, chopping, or a more precise amplifier.
Empfohlen
Data Acquisition Front End
The LM358PWRG4-JF can provide differential or single-ended amplification for low-rate data-acquisition channels, with one amplifier handling excitation or reference buffering and the other conditioning the measured signal. A 700 kHz gain-bandwidth product supports sensors and signals well below megahertz frequencies, while the 3 V to 30 V supply range allows interface design around multiple rails. The key design trade-off is DC accuracy: the listed 9,000 µV maximum offset may create unacceptable error at very small full-scale ranges. Use calibration, differential arrangement, and input filtering where offset or drift matters, while keeping the amplifier inside its common-mode and output-swing limits.
Empfohlen
Audio Preamplifier
The LM358PWRG4-JF is appropriate for modest audio preamplifier stages where a dual general-purpose amplifier, 30 V capability, and 700 kHz bandwidth are more important than premium noise or offset performance. One channel can amplify an audio input while the other provides gain or a buffer, reducing the footprint compared with two separate devices. The 9,000 µV maximum input offset is relatively high for high-fidelity audio, and the open-circuit output behavior must be considered in the selected topology. Coupling capacitors, input bias paths, output loading, and supply decoupling should be evaluated against the manufacturer characteristics before the stage is released.
Empfohlen
Active Filtering and Control Loops
The LM358PWRG4-JF can implement active low-pass filters, integrators, and error amplifiers in 0°C-to-70°C industrial systems. Its 700 kHz gain-bandwidth product gives ample closed-loop bandwidth for many slow control loops, and the dual channel permits filtering in one stage while the other performs feedback or monitoring. Component tolerances and the amplifier's input-offset behavior can influence filter accuracy, particularly in narrow-band or high-Q implementations. Keep passive values practical, place compensation and feedback parts close to the device, and verify closed-loop stability across the complete frequency range rather than relying only on the gain-bandwidth figure.
Empfohlen
Power-Supply Feedback and Monitoring
The LM358PWRG4-JF is useful for amplifier-based power-supply feedback, current monitoring, and threshold or comparator-style functions where the input signals remain inside the common-mode range. Its dual architecture can monitor two conditions or combine a sensing amplifier with an output driver. The 30 V rating supports higher-voltage supervisory circuitry than 5 V-only parts, while the 700 kHz bandwidth handles ripple and transient signals commonly encountered in slow power systems. Designers must account for the allowed output swing, input bias current, output-current capability, and whether an external pull-up or output network is required for the intended logic or drive load.
Empfohlen
Portable and Embedded Analog Interface
The LM358PWRG4-JF can serve as a dual analog interface in embedded and portable products requiring more headroom than a 3.3 V or 5 V op amp. Its 8-pin TSSOP package supports compact surface-mount layouts, and the 30 V maximum supply rating provides flexibility for mixed-voltage systems. The operating-temperature range of 0°C to 70°C suits consumer and commercial ambient conditions but not extended-temperature environments. Board planning should reserve local bypass capacitance, maintain short feedback paths, and check whether unused amplifier inputs require biasing. Verify the actual system rail, source impedance, capacitive loading, and ESD protection before assigning the part to a sensitive embedded interface.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für LM358PWRG4-JF – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | LM358PWRG4 | LM358PWR | LM2904PWR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) |
| Amplifier Configuration | Dual | Dual | Dual | Dual |
Wichtigste Unterscheidungsmerkmale
- Commercial-temperature dual-amplifier option (vs. LM2904PWR)
- High-voltage capability with dual integration (vs. LM358PWR)
- Direct same-family order-code path (vs. LM358PWRG4)
Designhinweise
Place the supply bypass capacitor close to the device's positive and ground pins, with a short return path to the ground reference. Keep the amplifier within its 30 V maximum supply rating and confirm the actual common-mode input range at the selected supply voltage. When the input signal can approach either supply rail, use a suitable attenuator or level-shift network rather than assuming the full rail-to-rail range is available.
Route feedback resistors and compensation capacitors directly between their associated pins and the amplifier output with minimal trace area. Keep sensitive input nodes away from power-supply switching nodes and high-current return paths. The 8-pin TSSOP footprint is compact, so assembly tolerances and exposed pad requirements, if any, must be checked against the manufacturer's land pattern before releasing artwork.
Do not treat the 700 kHz gain-bandwidth product as guaranteed usable bandwidth for every gain setting, and do not assume the output can reach either supply rail. Check input bias current with the planned source impedance, evaluate the 9,000 µV maximum offset against the required accuracy, and confirm capacitive-load stability. If the unused channel is present, connect it according to the manufacturer guidance rather than leaving its inputs floating.
The LM358PWRG4-JF is specified from 0°C to 70°C, so verify the enclosure temperature at the device rather than relying on nominal ambient conditions. Keep the TSSOP within the recommended layout and provide adequate copper for power dissipation and temperature uniformity. If one channel drives a load near its capability while the other remains lightly loaded, evaluate channel-to-channel thermal interaction and the complete operating profile.
Compliance-Informationen
The verified manufacturer and distributor listings do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 qualification is not claimed because the listed operating range is 0°C to 70°C.