LM358QT - Dual Op-Amp 1.1MHz DFN-8 | STMicroelectronics
Артикул: LM358QT ✓ АктивенLM358QT Обзор
An operational amplifier is a high-gain DC-coupled voltage amplifier with differential inputs and a single-ended output. As a member of the linear amplifier / signal conditioning IC family within analog semiconductor hierarchy, the general-purpose dual op-amp is one of the most widely used building blocks in electronics, performing amplification, active filtering, buffering, level shifting, and comparator-like threshold detection in virtually every analog signal chain.
Key differentiating features include internally frequency compensation (no external compensation components required), very low supply current per amplifier for battery-powered designs, low input bias current of 20 nA, and unity-gain stability across the full industrial temperature span. The wide 3 V to 30 V single-supply range allows direct operation from logic supplies or automotive rails through simple regulation.
Architecturally, the LM358QT consists of two independent, high-gain op amps sharing a common supply pin pair. The internally compensated bipolar design guarantees stability at unity gain without external capacitors, while the exposed-pad DFN-8 package provides a low thermal resistance path to the PCB, supporting compact, high-density layouts where SOIC-8 footprints are too large.
Typical applications include transducer amplifiers and sensor signal conditioning, DC gain blocks and active filters in industrial controls, and battery-powered consumer or portable instrumentation where quiescent drain matters. It also serves as a summing amplifier, integrator, or voltage follower in general-purpose analog front ends.
Design consideration: as a general-purpose bipolar-input op amp, the LM358QT is not a precision part; for microvolt-level offset or high-speed requirements, select a dedicated precision or high-bandwidth amplifier. Ensure the common-mode input range and output swing limitations near the rails are respected in single-supply designs.
This page consolidates verified datasheet parameters, drop-in alternatives, pricing context, and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для LM358QT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с LM358QT (тот же форм-фактор и посадочное место) — отличается по Amplifier Type, Package, Slew Rate, Input Bias Current, Frequency Compensation.
LM258QT
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →LM158QT
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
LM2904QTH-13
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →LM358QT Максимальные параметры и электрические характеристики
| Amplifier Type | General Purpose Operational Amplifier |
| Number of Circuits | 2 |
| Gain Bandwidth Product | 1.1 MHz (temperature compensated) |
| Slew Rate | 0.6 V/us |
| Large DC Voltage Gain | 100 dB |
| Input Bias Current | 20 nA |
| Supply Voltage Range (Single) | 3 V to 30 V |
| Supply Voltage Range (Dual) | +/-1.5 V to +/-15 V |
| Корпус | 8-UFDFN Exposed Pad (DFN 2x2 mm) |
| Тип монтажа | Surface Mount |
| Packaging | Tape & Reel |
| Frequency Compensation | Internally compensated |
| Статус RoHS | Compliant |
| Output Short-Circuit Protection | Yes (per ST LM358 family datasheet) |
Конфигурация выводов LM358QT
| Контакт 1 | OUT1 — Output of amplifier A |
| Контакт 2 | IN1- — Inverting input of amplifier A |
| Контакт 3 | IN1+ — Non-inverting input of amplifier A |
| Контакт 4 | GND/V- — Ground or negative supply |
| Контакт 5 | IN2+ — Non-inverting input of amplifier B |
| Контакт 6 | IN2- — Inverting input of amplifier B |
| Контакт 7 | OUT2 — Output of amplifier B |
| Контакт 8 | V+ — Positive supply |
Типичное применение
LM358QT подходит для 6 применениеs: Transducer and Sensor Signal Conditioning, Industrial Control Analog Blocks, Battery-Powered Portable Instruments, Audio Preamplification and Active Filters, DC Summing, Integrator and Comparator-Adjacent Blocks, Voltage Reference Buffering and Level Shifting.
Transducer and Sensor Signal Conditioning
The LM358QT fits sensor front ends because its 20 nA input bias current barely loads high-impedance transducers, and its 100 dB DC gain provides large closed-loop gain in a single stage for bridge and photodiode signals. The 3 V to 30 V single-supply range lets one rail power both the sensor and the amplifier. In a typical topology the second amplifier channel handles gain while the first channel buffers or filters. Keep input common-mode above ground since the bipolar input stage does not sense exactly to the negative rail.
Рекомендуется
Industrial Control Analog Blocks
On 24 V industrial rails the LM358QT operates comfortably within its 30 V maximum single-supply rating, amplifying current-sense and setpoint signals without extra regulation. Its internally frequency-compensated topology guarantees unity-gain stability with no external components, simplifying DIRM/control-board design. The 2x2 mm UFDFN-8 exposed-pad package saves board area versus SOIC-8 in dense PLC I/O modules. Designers should verify power dissipation at high supply voltage and add the exposed-pad ground connection for reliable thermal performance in sealed industrial enclosures.
Рекомендуется
Battery-Powered Portable Instruments
The LM358QT family's very low supply current per amplifier makes it a good fit for battery-operated multimeters, gas detectors, and handheld medical meters that run from a single 3 V to 9 V cell. The dual-channel integration means one package performs buffering plus gain, halving the channel count versus single op-amps. Because quiescent drain rises with supply voltage, running at the minimum practical V+ extends battery life. The 1.1 MHz bandwidth covers DC and audio-band measurement signals typical of portable instrumentation front ends.
Рекомендуется
Audio Preamplification and Active Filters
With a 1.1 MHz temperature-compensated bandwidth, 0.6 V/us slew rate, and 100 dB open-loop gain, the LM358QT supports microphone preamps, tone-control stages, and Sallen-Key active filters across the full audio band. Two independent channels enable stereo processing or filter-plus-buffer topologies in one 2x2 mm footprint. Its internally compensated bipolar design ensures click-free unity-gain stability. For low-noise, low-distortion stage design, respect the output swing limits near the rails and source impedance levels appropriate to a general-purpose bipolar-input amplifier.
Рекомендуется
DC Summing, Integrator and Comparator-Adjacent Blocks
The LM358QT's 100 dB large-signal DC gain supports precision summing amplifiers, integrators, and level-shift blocks in control loops and test fixtures. One channel can integrate a tachometer or error signal while the second channel scales and offsets it for an ADC or comparator. The exposed-pad UFDFN-8 package keeps thermal gradients low for offset stability. Design tip: use a bias-current compensation resistor on the non-inverting input to cancel input bias current error, and observe the common-mode range in single-supply integrator topologies.
Рекомендуется
Voltage Reference Buffering and Level Shifting
As a unity-gain-stable, internally compensated amplifier, the LM358QT buffers voltage references and DAC outputs for distribution to comparators and sensor excitation inputs, with one package supplying two independent buffered rails. Its 30 V single-supply ceiling allows buffering references close to higher analog rails. Output short-circuit protection adds robustness against accidental board shorts. Designers should note the general-purpose output stage's limited sink capability near the negative rail and add a resistive pull-down when the buffered load must operate close to ground.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для LM358QT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LM258QT | LM158QT | LM2904QT |
|---|---|---|---|---|
| Package | 8-UFDFN Exposed Pad (2x2 mm) | 8-UFDFN Exposed Pad (2x2 mm) - same | 8-UFDFN Exposed Pad (2x2 mm) - same | 8-UFDFN Exposed Pad (2x2 mm) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Number of Circuits | 2 | 2 | 2 | 2 |
| Gain Bandwidth Product | 1.1 MHz | 1.1 MHz | 1.1 MHz | 1.1 MHz |
| Slew Rate | 0.6 V/us | 0.6 V/us | 0.6 V/us | 0.6 V/us |
| Large DC Voltage Gain | 100 dB | 100 dB | 100 dB | 100 dB |
| Single Supply Range | 3 V to 30 V | 3 V to 30 V | 3 V to 30 V | 3 V to 26 V (per family datasheet) |
Ключевые отличия
- Compact 2x2 mm UFDFN-8 exposed-pad footprint (против LM258QT)
- Extended and automotive temperature grade options in the same footprint (против LM2904QT)
- Wide 30 V single-supply tolerance (против LMV358-class low-voltage parts)
Заметки по проектированию
Connect the UFDFN-8 exposed pad to the ground plane with an array of thermal vias. The exposed pad is the primary thermal and, for signal integrity, the local 0 V reference for the bipolar input stage. Because the 2x2 mm DFN land pattern has minimal perimeter, follow the STMicroelectronics recommended footprint in the datasheet mechanical drawing exactly; DFN solder wicking defects are the most common assembly issue with this package.
Decouple V+ (pin 8) with a 100 nF ceramic capacitor placed within 2 mm of the pin, plus a bulk 1 uF to 10 uF capacitor per rail segment. At 30 V supply with both channels driving moderate loads, verify total device dissipation against the exposed-pad theta_JA before finalizing copper area. Estimated: with a few mA per channel at 30 V, dissipation stays under a few tens of milliwatts, but high-load applications should recheck against the datasheet thermal table.
The LM358 input common-mode range does not include the negative rail: on a single 3.3 V or 5 V supply, keep input signals at least a few hundred millivolts above ground or the output will clip unexpectedly. Similarly the general-purpose output stage cannot swing to V+ under load. Many 'LM358 not working at unity gain near zero' field issues come from violating these two range limits, not from a defective part.
Информация о соответствии
RoHS compliance indicated on distributor listings for the ST LM358QT. Automotive-grade designs should use the LM2904 family instead.