LT1076CQ#PBF - 2A Buck/Boost/Flyback Regulator | Analog Devices
Артикул: LT1076CQ#PBF ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $6.79 | $6,79 |
| 10 | $6.1 | $61,00 |
| 100 | $5.5 | $550,00 |
| 500 | $4.95 | $2.475,00 |
| 1.000 | $4.45 | $4.450,00 |
LT1076CQ#PBF Обзор
A switching regulator is a voltage regulator that uses an inductor, switch, and diode to efficiently convert an input voltage to a desired output voltage. Unlike linear regulators, switching regulators achieve high efficiency by storing energy in the inductor and switching the power transistor on and off. The LT1076CQ#PBF belongs to the family of DC-DC converters, which are essential in power management systems for converting voltages in battery-powered devices, industrial equipment, and automotive electronics.
Key features of the LT1076CQ#PBF include a 2A switch current rating, wide input voltage range up to 60V, and the ability to operate in multiple topologies. The current-mode control architecture provides inherent cycle-by-cycle current limiting and simplifies loop compensation. The device also features thermal shutdown and a low quiescent current, making it suitable for power-sensitive applications.
The LT1076CQ#PBF uses a bipolar process technology, which provides robust performance and high reliability. The 100kHz switching frequency balances efficiency and component size, allowing for compact inductor and capacitor selections. The device's adjustable output voltage range of 2.5V to 50V provides flexibility for various output requirements.
Typical applications include industrial power supplies, battery chargers, distributed power systems, and automotive electronics. The device's ability to step up, step down, or invert voltage makes it a versatile choice for many power conversion needs.
When designing with the LT1076CQ#PBF, ensure proper PCB layout with short, low-inductance paths for the switch node and ground. Use appropriate input and output capacitors to minimize ripple and ensure stability. The thermal pad of the D2PAK package should be connected to a large copper area for heat dissipation.
Аналоги без доработки для LT1076CQ#PBF — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с LT1076CQ#PBF (тот же форм-фактор и посадочное место) — отличается по Function, Output Type, Package, RoHS Status, Switching Frequency.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
LT1076CQ-5#PBF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LT1074CQ#PBF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LT1076CQ#TR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LT1076CQ#PBF Максимальные параметры и электрические характеристики
| Функция | Step-Down (Buck), Step-Up (Boost), Inverting, Flyback |
| Тип выхода | Adjustable |
| Диапазон выходного напряжения | 2.5 V to 50 V |
| Output Current | 2 A (Switch) |
| Диапазон входного напряжения | Up to 60 V |
| Частота переключения | 100 kHz |
| PWM Type | Current Mode |
| Синхронный выпрямитель | No |
| Количество выходов | 1 |
| Корпус | TO-263-6 (D2PAK, 5 Leads + Tab) |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
| Lead Free | Yes |
Конфигурация выводов LT1076CQ#PBF
| Контакт 1 | VSW — Switch output |
| Контакт 2 | VIN — Input supply |
| Контакт 3 | GND — Ground |
| Контакт 4 | FB — Feedback |
| Контакт 5 | SHDN — Shutdown |
| Контакт TAB | GND — Ground (thermal pad) |
Типичное применение
LT1076CQ#PBF подходит для 6 применениеs: Industrial Power Supplies, Battery Chargers, Automotive Electronics, Distributed Power Systems, Telecom Equipment, LED Lighting Drivers.
Industrial Power Supplies
The LT1076CQ#PBF is ideal for industrial power supplies due to its wide input voltage range up to 60V and ability to step down high voltages efficiently. Its 2A switch current can power sensors, actuators, and control logic. The current-mode control ensures stable operation under varying loads, which is common in industrial environments. The device's robust bipolar design handles transients and provides reliable performance in harsh conditions.
Рекомендуется
Battery Chargers
The LT1076CQ#PBF can be configured as a buck converter for battery charging applications. Its adjustable output voltage from 2.5V to 50V allows it to charge various battery chemistries, including lead-acid and lithium-ion. The 100kHz switching frequency enables the use of small inductors, making the charger compact. The device's current-mode control provides accurate current limiting, essential for safe charging. Thermal shutdown protects the circuit during prolonged charging.
Рекомендуется
Automotive Electronics
In automotive applications, the LT1076CQ#PBF handles input voltages up to 60V, accommodating load-dump transients. It can step down the 12V battery rail to power microcontrollers, sensors, and infotainment systems. The device's high efficiency reduces heat dissipation in the engine compartment. Its robust bipolar construction withstands temperature extremes. The TO-263 package with exposed tab aids thermal management when mounted on a heatsink.
Рекомендуется
Distributed Power Systems
The LT1076CQ#PBF is suitable for distributed power architectures where multiple voltage rails are generated from a common bus. Its ability to step up, step down, or invert makes it flexible for generating positive and negative supplies. The 2A switch current can power local loads, reducing the need for centralized converters. The device's current-mode control simplifies loop compensation, easing design. Its wide input range allows it to operate from various bus voltages.
Рекомендуется
Telecom Equipment
Telecom equipment often requires multiple voltage rails from a -48V backplane. The LT1076CQ#PBF can be used in flyback or buck-boost configurations to generate positive and negative supplies. Its 100kHz switching frequency allows for compact magnetics, saving board space. The device's high input voltage rating handles the -48V rail with margin. Its current-mode control provides excellent line and load regulation, critical for reliable telecom operation.
Рекомендуется
LED Lighting Drivers
The LT1076CQ#PBF can drive LED strings in buck configuration, providing constant current with external sensing. Its adjustable output voltage allows matching the LED forward voltage. The 2A switch current can drive multiple LEDs in series. The device's high efficiency reduces heat in lighting fixtures. PWM dimming can be implemented by toggling the shutdown pin. The wide input range supports various AC-DC adapter outputs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для LT1076CQ#PBF — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LT1076CQ-5#PBF | LT1074CQ#PBF | LT1076CQ#TR |
|---|---|---|---|---|
| Package | TO-263-6 (D2PAK) | TO-263-6 (D2PAK) | TO-263-6 (D2PAK) | TO-263-6 (D2PAK) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Output Current | 2A (Switch) | 2A (Switch) | 5A (Switch) | 2A (Switch) |
| Output Voltage | Adjustable 2.5V to 50V | Fixed 5V | Adjustable 2.5V to 50V | Adjustable 2.5V to 50V |
| Switching Frequency | 100kHz | 100kHz | 100kHz | 100kHz |
| Input Voltage Max | 60V | 60V | 60V | 60V |
| Topology Support | Buck, Boost, Flyback, Inverting | Buck, Boost, Flyback, Inverting | Buck, Boost, Flyback, Inverting | Buck, Boost, Flyback, Inverting |
| RoHS | Compliant | Compliant | Compliant | Compliant |
Ключевые отличия
- Higher switch current than LT1076CQ-5#PBF (против LT1076CQ-5#PBF)
- Lower switch current than LT1074CQ#PBF (против LT1074CQ#PBF)
- Lead-free and RoHS compliant (против LT1076CQ#TR)
Заметки по проектированию
For the LT1076CQ#PBF, ensure the switch node (VSW) trace is short and wide to minimize parasitic inductance and EMI. Place the input capacitor close to the VIN and GND pins. The feedback resistor divider should be placed near the FB pin with a small capacitor for noise filtering. Use a solid ground plane to reduce noise.
The TO-263 (D2PAK) package has a thermal pad that must be soldered to a large copper area on the PCB. For 2A output at high input-output differentials, power dissipation can be significant. Calculate the junction temperature using the thermal resistance and ensure it stays below the maximum rating. Add vias to the ground plane for better heat spreading.
Avoid using the LT1076CQ#PBF without proper input and output capacitance. The datasheet recommends a minimum of 100uF electrolytic on the input and 100uF on the output. Using ceramic capacitors alone may cause instability due to their low ESR. Also, ensure the feedback network is properly compensated to avoid oscillation.
Информация о соответствии
RoHS compliant and lead-free per #PBF suffix. Other compliance data not specified in verified sources.
