Analog Devices

LTC1350CG - 120 kbaud RS-562 Transceiver | Analog Devices

Артикул: LTC1350CG ✓ Активен
3.3 V Vdss 28-terminal SSOP Package
MOQ: 1 |

LTC1350CG Обзор

Analog Devices LTC1350CG is a 3-driver, 5-receiver RS-562 line transceiver rated for data rates up to 120 kbaud and operation from a 3.3 V low-power supply. The device is offered in a 28-terminal commercial-grade SSOP package with gull-wing leads. According to the Analog Devices manufacturer product page, it complies with the applicable EIA/TIA-562 data-rate and overvoltage requirements and can drive a 1000 pF load through a 3 kΩ network.

An RS-562 transceiver is a bidirectional interface IC that combines differential line-driver and line-receiver functions in one package. In the broader semiconductor hierarchy, it belongs to the interface-IC family, where transceivers sit between digital logic and physical communication lines. Unlike single-ended RS-232 equipment, RS-562 is designed for balanced, point-to-point connections and reduced ground-reference sensitivity. The LTC1350CG therefore serves as the physical-layer interface between a data-processing system and a balanced cable.

The three drivers support independent transmit channels, while the five receivers provide five receive channels. Its maximum operating data rate of 120 kbaud makes it appropriate for moderate-speed control, instrumentation, and industrial data links rather than high-speed Ethernet or video transmission. Operation from a 3.3 V supply also allows it to interface with modern 3.3 V logic systems. Commercial-grade temperature classification makes the CG suffix relevant for room-temperature industrial and commercial equipment.

The receiver architecture provides the physical-layer interface needed for balanced data transfer, while the multiple driver and receiver channels reduce the number of separate interface packages required in multi-channel equipment. Designers should account for the specified 1000 pF and 3 kΩ load condition when evaluating cable length, termination, topology, and data rate. Balanced routing on the printed circuit board is also important for preserving the noise-rejection benefit associated with differential signaling.

Typical applications include industrial control links, test and measurement systems, point-to-point data acquisition, embedded equipment interfaces, and instrumentation networks operating at up to 120 kbaud. The device can also support point-to-point links between a host controller and a remote peripheral when both ends use compatible balanced signaling and termination.

Design the power and signal paths carefully. Place the transceiver close to the connector, route driver and receiver traces as a balanced pair, observe the ground reference at the interface boundary, and validate the completed cable and load configuration against the EIA/TIA-562 requirements. A 1000 pF load is a meaningful capacitive budget, so cable length and receiver loading can materially affect usable communication distance.

This product page combines the manufacturer’s operating limits with practical interface guidance, package information, sourcing context, and verified ordering references. It helps engineers distinguish the LTC1350CG from suffix and ordering variants while focusing on the parameters that determine board-level compatibility: 3.3 V operation, 120 kbaud performance, balanced RS-562 signaling, 3.5 V low-power operation, and the 28-terminal SSOP footprint.

Аналоги без доработки для LTC1350CG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

LTC1350IG

✅ Прямая замена
📦 28-pin SSOP
Same 3.3V EIA/TIA-562 transceiver function and 28-pin SSOP package; some electrical characteristics differ, with the available comparison reporting 120 kbaud performance for the family.

📋 Справочный аналог (нет в каталоге)

LTC1350CG Характеристики

Product Type RS-562 line transceiver
Driver Count 3 drivers
Receiver Count 5 receivers
Maximum Data Rate 120 kbaud
Напряжение питания 3.3 V
Specified Load 1000 pF with 3 kΩ
Compliance EIA/TIA-562 data-rate and overvoltage specifications
Temperature Grade Commercial
Корпус 28-terminal SSOP
Lead Form Gull wing
Package Shape Rectangular
Тип монтажа Surface mount
Transceiver Configuration 3-driver, 5-receiver
Signal Type Balanced differential line signaling

Руководство по цоколевке LTC1350CG в корпусе rectangular

Цоколевка для LTC1350CG (корпус rectangular). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса rectangular для LTC1350CG

Нет подробных данных о распиновке для LTC1350CG.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

LTC1350CG подходит для 6 применениеs: Industrial Control Point-to-Point Links, Test and Measurement Data Acquisition, Embedded Equipment Communication, Instrumentation Networking, Remote Sensor Interface, Communication Port for Industrial Equipment.

🏭

Industrial Control Point-to-Point Links

The Analog Devices LTC1350CG fits balanced point-to-point control links that operate at up to 120 kbaud on a 3.3 V system supply. Its three drivers and five receivers can serve several communication channels without requiring separate single-direction interface packages. According to the manufacturer product page, the device supports a 1000 pF load through a 3 kΩ network, so cable length, connector capacitance, and termination must remain within the channel design. Use the driver outputs toward remote equipment and receiver inputs toward the controller, while keeping each balanced pair closely routed and symmetrically terminated.

🖥️

Test and Measurement Data Acquisition

The LTC1350CG is appropriate for moderate-rate data-acquisition and laboratory interface systems that require balanced signaling from a 3.3 V logic environment. Its 120 kbaud operating limit is ample for supervisory commands, status information, and low-bandwidth measurement data, while three transmitters and five receivers support multiple point-to-point links. According to the Analog Devices manufacturer product page, compliance with EIA/TIA-562 requirements supports standardized interface behavior. Keep sensitive analog and reference circuitry away from cable-entry points, and route the transceiver side of each balanced connection away from high-current switching nodes.

🔧

Embedded Equipment Communication

The LTC1350CG can connect an embedded controller to remote instrumentation over balanced copper links when the required baud rate does not exceed 120 kbaud. Operation from a 3.3 V supply simplifies integration with modern controller logic, while the five receivers allow multiple peripheral responses to be monitored. According to the Analog Devices manufacturer product page, the transceiver is designed around EIA/TIA-562 interface behavior and a specified 1000 pF, 3 kΩ load condition. Provide local decoupling near the supply pins and use a consistent ground-reference strategy at each cable endpoint to prevent interface stress.

🌐

Instrumentation Networking

The three-driver, five-receiver arrangement of the LTC1350CG supports instrumentation networks composed of several point-to-point differential links. The 120 kbaud capability suits supervisory channels, equipment interlocks, and configuration traffic rather than bulk file transfer. According to the Analog Devices manufacturer product page, the transceiver operates from 3.3 V and is compliant with applicable EIA/TIA-562 data-rate and overvoltage specifications. Maintain the specified load budget through controlled cable lengths, proper connector selection, and balanced PCB routing, particularly when several cables leave the same instrument enclosure.

🧩

Remote Sensor Interface

The LTC1350CG can provide a balanced physical interface between a local controller and a remote sensor assembly when the data rate is 120 kbaud or lower. Balanced signaling is useful in industrial environments where cable-borne noise and ground-potential differences can affect single-ended links. According to the Analog Devices manufacturer product page, the transceiver supports a 1000 pF load with a 3 kΩ network. Keep the cable route away from motors and switching equipment, place the interface near the connector, and confirm that the sensor cable and termination do not exceed the allowed capacitive load.

⚡

Communication Port for Industrial Equipment

The LTC1350CG is suitable for adding a standardized balanced communication port to industrial equipment with a 3.3 V control system. The three transmitter channels can support connections to multiple peripheral nodes, while the five receiver channels provide additional incoming data paths. According to the Analog Devices manufacturer product page, the device is designed to meet EIA/TIA-562 specifications and operate at up to 120 kbaud. Designers should separate the interface from noisy power stages, use approved balanced cables and connectors, and verify grounding and surge-protection arrangements at the external port.

Сводка рекомендуемых товаров

LTC1350CG Analog Devices Используется в: Industrial Control Point-to-Point Links, Test and Measurement Data Acquisition, Embedded Equipment Communication, Instrumentation Networking, Remote Sensor Interface, Communication Port for Industrial Equipment LTC1350CG#PBF Commercial ordering variant Используется в: Industrial Control Point-to-Point Links, Embedded Equipment Communication, Remote Sensor Interface LTC1350CG#TR Ordering variant for the same device family Используется в: Test and Measurement Data Acquisition, Instrumentation Networking, Communication Port for Industrial Equipment
What is the LTC1350CG?
The Analog Devices LTC1350CG is a 3-driver, 5-receiver RS-562 balanced line transceiver operating from a 3.3 V supply. According to the Analog Devices manufacturer product page, it supports data rates up to 120 kbaud and is packaged in a 28-terminal SSOP. It is intended for point-to-point balanced data links in commercial-grade industrial, instrumentation, control, and test systems.
What are the key specifications of LTC1350CG that engineers should know?
The LTC1350CG combines three line drivers, five line receivers, a 3.3 V supply, and operation up to 120 kbaud in a 28-terminal SSOP package. According to the Analog Devices manufacturer product page, the device meets the EIA/TIA-562 data-rate and overvoltage specifications. Its stated load capability is 1000 pF with a 3 kΩ network, making cable capacitance and termination essential design constraints.
What is the maximum data rate of LTC1350CG?
The LTC1350CG operates at data rates up to 120 kbaud. According to the Analog Devices manufacturer product page, this rating is tied to compliance with the applicable EIA/TIA-562 specifications. Actual link performance also depends on cable length, connector capacitance, receiver loading, termination, and the noise environment, so the rated speed should not be interpreted as independent of the complete channel.
How many drivers and receivers does LTC1350CG contain?
The LTC1350CG contains three line drivers and five line receivers. According to the Analog Devices manufacturer product page, this arrangement supports several balanced communication channels in one 28-terminal SSOP package. It can therefore serve as a multi-channel physical-layer interface where separate point-to-point links are required, reducing component count compared with individual single-channel transceivers.
What supply voltage does LTC1350CG require?
The LTC1350CG is specified for operation from a 3.3 V low-power supply. According to the Analog Devices manufacturer product page, this makes the interface suitable for systems built around 3.3 V logic. Confirm the complete operating supply range, input and output logic thresholds, and supply-current limits in the manufacturer datasheet before finalizing a new design.
Where can I download the LTC1350CG datasheet PDF?
The official LTC1350 product page at Analog Devices provides the manufacturer documentation and datasheet access for the LTC1350CG. According to the manufacturer product page, the device provides three drivers, five receivers, operation up to 120 kbaud, and compliance with EIA/TIA-562 requirements. Use the pin-description table, electrical characteristics, and recommended application circuit from that document when assigning PCB signals.
Where can I find the LTC1350CG pinout?
The LTC1350CG pinout is found in the pin-description table and package drawing in the Analog Devices manufacturer datasheet. The verified product information identifies the device as a 28-terminal gull-wing SSOP, but it does not reproduce the individual terminal assignments. Use the manufacturer drawing to map supply, driver, receiver, enable, and ground connections before laying out the board.
What is the difference between LTC1350CG and LTC1350CG#PBF?
The LTC1350CG and LTC1350CG#PBF identify ordering variants of the same LTC1350CG RS-562 transceiver family, but the verified excerpts do not define the suffix codes. According to the manufacturer product page, the underlying LTC1350CG is a 3.3 V, 3-driver, 5-receiver device rated to 120 kbaud. Confirm the exact package, ordering code, and marking in the manufacturer documentation before treating the variants as interchangeable.
When should I choose LTC1350CG for a balanced data interface?
Choose the LTC1350CG when a design needs balanced point-to-point RS-562 links operating at up to 120 kbaud from a 3.3 V supply. According to the Analog Devices manufacturer product page, it provides three drivers and five receivers and supports a 1000 pF load through a 3 kΩ network. It is best suited to moderate-speed control, instrumentation, and acquisition links rather than high-speed LAN traffic.
Is LTC1350CG suitable for industrial control and test equipment?
The LTC1350CG is suitable for many commercial-grade industrial control and test-equipment interfaces because it combines balanced transceivers with 120 kbaud operation. According to the Analog Devices manufacturer product page, it meets applicable EIA/TIA-562 data-rate and overvoltage specifications. The commercial temperature grade and exact environmental limits should still be checked against the enclosure temperature and production requirements.
What can replace LTC1350CG?
No distinct drop-in replacement for the LTC1350CG is established by the verified cross-reference information. The visible alternatives are ordering variants of the same device rather than independently verified substitutes. According to the Analog Devices manufacturer product page, compatibility requires the same 3.3 V RS-562 interface, three drivers, five receivers, 120 kbaud capability, and 28-terminal SSOP footprint.
Is LTC1350CG the same as LTC1350CG#TR?
The LTC1350CG and LTC1350CG#TR are ordering variants associated with the same LTC1350CG family entry, but the verified excerpts do not define the suffix behavior. According to the Analog Devices manufacturer product page, the core device remains a 3.3 V, 120 kbaud, 3-driver, 5-receiver RS-562 transceiver. Verify the packing method, lead finish, and orderable configuration before substitution.
What is the best cross-brand equivalent for LTC1350CG?
No verified cross-brand equivalent has been established for the LTC1350CG. A true replacement must preserve the 28-terminal SSOP footprint, 3.3 V operation, balanced RS-562 electrical behavior, three drivers, five receivers, and the required 120 kbaud channel performance. According to the Analog Devices manufacturer product page, those interface and loading requirements should be used as the acceptance criteria for any substitution.
Where can I buy LTC1350CG and check current availability?
Use the Request a Quote form on this page to ask about LTC1350CG availability, current lead time, and minimum order quantity. The verified ordering references identify the component and its commercial order variants, but they do not print a quantity-break table or a live stock count. The manufacturer product page remains the primary source for technical availability and lifecycle information.
How much does LTC1350CG cost?
Use the Request a Quote form on this page for the current LTC1350CG quotation and quantity-break schedule. No qualifying unit price with an explicitly printed quantity was shown for the exact MPN, so this page does not publish a static price figure. The request can also cover packaging, scheduled delivery, and minimum-order requirements for the required quantity.
What is the lead time for LTC1350CG?
The current LTC1350CG lead time depends on order quantity, package variant, and inventory status, so it should be confirmed through the Request a Quote form on this page. According to the manufacturer product page, the part is an established 3.3 V RS-562 transceiver family, but the verified material does not state a fixed production lead time. Request the delivery schedule with the exact orderable suffix and quantity.
Does LTC1350CG meet RoHS and REACH requirements?
The RoHS and REACH status of the LTC1350CG cannot be confirmed from the manufacturer product-page excerpt used for this listing. According to the Analog Devices product page, the device is a commercial-grade RS-562 transceiver in an SSOP package. Request the current manufacturer compliance declaration before using the component in a regulated production design.
How should an LTC1350CG balanced interface be laid out?
Route each LTC1350CG balanced line as a closely coupled differential pair and connect the interface to the external connector through a short, symmetric path. According to the Analog Devices manufacturer product page, the specified load is 1000 pF with a 3 kΩ network, so PCB and connector capacitance consume a meaningful portion of the channel budget. Follow the manufacturer’s pinout and recommended termination arrangement.

Справочные инженерные данные для LTC1350CG — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the LTC1350CG when the design requires a 3.3 V balanced RS-562 interface, up to 120 kbaud operation, three driver channels, five receiver channels, and a 28-terminal SSOP footprint. It is well suited to industrial control, instrumentation, embedded equipment, and remote-sensor links where moderate data rates and balanced signaling are more important than high throughput. The LTC1350CG#PBF and LTC1350CG#TR entries are ordering variants rather than independently validated performance alternatives, so they should not be treated as substitutes without confirming their suffix definitions. No distinct same-package cross-brand equivalent has been verified. Any proposed replacement must therefore be checked against the 3.3 V supply, RS-562 electrical behavior, EIA/TIA-562 requirements, driver and receiver counts, 120 kbaud rating, load capability, and exact 28-terminal pin arrangement.

Сравнение с аналогами

Параметр Этот товар
Package 28-terminal SSOP
Brand Analog Devices
Product Type RS-562 line transceiver
Driver Count 3 drivers
Receiver Count 5 receivers
Maximum Data Rate 120 kbaud
Nominal Supply Voltage 3.3 V
Specified Load 1000 pF with 3 kΩ
Temperature Grade Commercial
Interface Compliance EIA/TIA-562 data-rate and overvoltage specifications

Ключевые отличия

  • Combines multiple physical-layer channels in one interface IC (против Single-direction RS-562 transceiver packages)
  • Supports modern 3.3 V control systems (против Higher-voltage RS-562 interface implementations)
  • Provides a defined moderate-speed channel limit (против High-speed serial-interface transceivers)

Заметки по проектированию

Route every LTC1350CG balanced signal as a closely coupled differential pair, with the two conductors maintained at approximately equal impedance through connectors and test points. Keep the interface section physically separate from switching-power nodes and high-current relay or motor paths. The manufacturer specifies operation with a 1000 pF load through a 3 kΩ network, so PCB escape traces, connector capacitance, and cable capacitance all contribute to the channel budget.

Do not assume that the 120 kbaud rating alone guarantees a usable cable distance. The LTC1350CG is intended for balanced RS-562 links with a controlled 1000 pF, 3 kΩ load condition. Verify the complete cable, connector, receiver, and termination configuration at the intended rate. Incorrect impedance, excessive stubs, or poorly controlled ground references can reduce margin even when the nominal baud rate is below the device maximum.

Place the LTC1350CG close to the external interface connector and provide short, symmetric paths from the device to protection components and the board edge. Keep supply and ground connections compact, use suitable bypassing close to the device pins, and avoid sharing high-current return paths with sensitive balanced signals. These practices reduce radiated coupling and help preserve differential signal integrity in industrial environments.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer product-page excerpt does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because the listed device is commercial grade rather than an automotive-qualified variant.

Данные проверены: 2026-11-09 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

LTC1350CG datasheet LTC1350CG specifications LTC1350CG pinout LTC1350CG datasheet pdf Analog Devices LTC1350CG LTC1350CG 120 kbaud LTC1350CG 3.3V LTC1350CG SSOP-28 LTC1350CG RS-562 transceiver LTC1350CG equivalent LTC1350CG replacement LTC1350CG price

Связанные компоненты & термины

Analog Devices LTC1350CG LTC1350 LTC1350CG#PBF LTC1350CG#TR RS-562 EIA/TIA-562 line transceiver interface IC balanced differential signaling 3-driver 5-receiver 120 kbaud 3.3 V 1000 pF load 3 kΩ network SSOP-28 surface mount industrial control test and measurement embedded equipment commercial grade
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ