LTC2159CUK - 16-Bit 20Msps Low Power ADC | Analog Devices
Артикул: LTC2159CUK ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $40.7 | $40,70 |
| 10 | $38.7 | $387,00 |
| 100 | $34.95 | $3.495,00 |
| 500 | $31.85 | $15.925,00 |
| 1.000 | $28.75 | $28.750,00 |
LTC2159CUK Обзор
A pipelined ADC is a high-speed sampling converter that uses multiple cascaded low-resolution flash stages and a digital correction engine to deliver high bit resolution at sample rates from a few MHz to several hundred MHz. Within the broader converter taxonomy, the LTC2159CUK belongs to the successive-approximation-adjacent high-speed family that sits between precision SAR ADCs (>1 Msps, low noise) and ultra-high-speed flash ADCs (>1 Gsps, low resolution). Pipeline ADCs trade latency for throughput and are the de-facto standard for wideband IF sampling, software-defined radio, and digital oscilloscope front ends.
Key differentiating specifications include 77 dB SNR at baseband, 90 dB SFDR, single 1.8 V analog supply operation, CMOS or DDR LVDS digital outputs with a separate 1.2 V to 1.8 V output supply, and very low power consumption (per the datasheet, total power is approximately one third of competing 16-bit/20 Msps parts). The integrated input network simplifies front-end design, and an internal clock duty-cycle stabilizer preserves AC performance even with poor clock sources.
Architecturally, the part combines a fully differential input buffer, a multi-stage switched-capacitor pipeline, and an LVDS/CMOS serializer, all clocked by a single-ended or differential encoding input. Digital-output formatting is selectable: full-rate CMOS, double-data-rate CMOS, or double-data-rate LVDS to ease interfacing with FPGAs and ASICs of varying I/O standards.
Typical applications include high-end communications receivers (LTE/3G base-station digitizers), radar IF sampling, cable-infrastructure head-ends, medical imaging (ultrasound I/Q demodulation), and high-density portable test instruments. For each of these, the combination of 16-bit resolution, 20 Msps, low power, and small 7 mm x 7 mm QFN footprint reduces board area and thermal budget.
Design consideration: when digitizing signals above the first Nyquist, ensure the front-end anti-alias filter has stop-band attenuation beyond 77 dB over the relevant image band, and provide a low-jitter clock to preserve SNR. At higher input frequencies, SNR degrades predictably, so select the input drive network to match the recommended source impedance.
This page synthesizes distributor pricing, packaged variants, and cross-reference alternatives that complement what is shown on the manufacturer product page.
Аналоги без доработки для LTC2159CUK — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с LTC2159CUK (тот же форм-фактор и посадочное место) — отличается по SNR, Resolution, Package, Sampling Rate, SFDR.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
LTC2158CUK
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
LTC2160CUK
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
LTC2122CUK
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$83 / шт.
Открыть даташит →LTC2155CUP-12
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$44.25 / шт.
Открыть даташит →LTC2156IUP-14
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$134.1 / шт.
Открыть даташит →LTC2159CUK Максимальные параметры и электрические характеристики
| Разрешение | 16 bit |
| Sample Rate | 20 Msps |
| Number of Input Channels | 1 |
| Architecture | Pipelined |
| SNR | 77 dB |
| SFDR | 90 dB |
| Analog Supply Voltage | 1.8 V |
| Digital Output Supply Range | 1.2 V to 1.8 V |
| Digital Output Modes | CMOS / DDR CMOS / DDR LVDS |
| Input Type | Differential |
| Корпус | 48-lead QFN (7 mm x 7 mm) |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
| Lead-Free | Yes (PBF suffix) |
Руководство по цоколевке LTC2159CUK в корпусе 48-lead qfn (7 mm x 7 mm)
Цоколевка для LTC2159CUK (корпус 48-lead qfn (7 mm x 7 mm)). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для LTC2159CUK.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
LTC2159CUK подходит для 7 применениеs: Communications Receiver IF Sampling, Radar IF Digitization, Medical Ultrasound I/Q Demodulation, Cable Infrastructure Head-End Digitizer, Portable Test and Measurement Instrument, Software Defined Radio (SDR) Receiver Front End, Wideband Data Acquisition Module.
Communications Receiver IF Sampling
The LTC2159CUK's 16-bit resolution and 20 Msps throughput, paired with 77 dB SNR and 90 dB SFDR, suit it to digitizing intermediate frequencies in LTE and 3G base-station receivers. Placed after the analog mixing stage, it samples the IF at 20 Msps with very low power dissipation, easing thermal budget in dense multi-channel systems. According to the datasheet, the differential input and integrated front-end network simplify the anti-alias filter design and reduce BOM count. Compared to a discrete 16-bit SAR running at the same rate, the LTC2159CUK's pipeline architecture delivers higher sustained throughput. Companion MPNs: a low-jitter clock generator (e.g., AD9523-1) and an FPGA with LVDS receivers (e.g., XC7A35T) complete the channel.
Рекомендуется
Radar IF Digitization
For radar IF digitization the LTC2159CUK offers 16-bit dynamic range with 90 dB SFDR, well-matched to the wide dynamic range of pulsed radar returns. At a 20 Msps sample rate, it captures multi-MHz signal envelopes with single-pass SNR integrity. Per the Analog Devices datasheet, the differential inputs reject common-mode noise from radar front-ends, while the optional LVDS output mode minimizes EMI across high-speed board traces. Compared to older 12-bit radar ADCs, the LTC2159CUK adds 4 effective bits of dynamic range, critical for resolving small targets next to large clutter. Companion MPNs: an LNA (e.g., HMC7178LP3GE) and an FPGA DSP fabric (e.g., XC7K325T) are typical co-designs.
Рекомендуется
Medical Ultrasound I/Q Demodulation
In ultrasound systems, the LTC2159CUK's low power and 16-bit resolution enable portable or handheld probe designs. Per the datasheet, the part operates from a single 1.8 V supply with a separate 1.2 V-1.8 V digital I/O rail, simplifying integration with low-power DSP processors. The differential input and 77 dB SNR preserve signal fidelity across the dynamic range of reflected ultrasound echoes. Placed after the I/Q demodulator, it samples the baseband at 20 Msps and outputs LVDS to the FPGA-based beamformer. Compared to larger resolution ultrasound ADCs, the LTC2159CUK's compact 48-QFN footprint reduces overall probe size and battery draw. Companion MPNs: AD8339 I/Q demodulator and a low-power FPGA.
Рекомендуется
Cable Infrastructure Head-End Digitizer
Cable downstream/upstream digitizers benefit from the LTC2159CUK's 77 dB SNR and 90 dB SFDR, which preserve QAM constellation integrity across hundreds of MHz of aggregated spectrum. According to the LTC2159 datasheet, the DDR LVDS output mode streamlines high-throughput data transfer to large FPGAs without adding parallel-data EMI. With 20 Msps throughput, the part captures multiple adjacent QAM carriers while keeping per-channel power dissipation low. Compared to older 12-bit cable ADCs, the LTC2159CUK adds critical margin for 1024-QAM and 4096-QAM modulation schemes. Companion MPNs: an FPGA with high-speed LVDS SERDES and a cable amplifier front-end.
Рекомендуется
Portable Test and Measurement Instrument
Handheld spectrum analyzers and portable digitizers benefit from the LTC2159CUK's low total power and 7 mm x 7 mm QFN footprint, both of which preserve battery life and reduce PCB area. According to the datasheet, the integrated input network simplifies front-end signal conditioning and saves BOM cost. The 16-bit/20 Msps combination suits digitizing audio-band to low-IF signals with 77 dB SNR. Compared to higher-speed pipeline ADCs, the LTC2159CUK is the right performance point for sub-10 MHz inputs and extends battery runtime. Companion MPNs: an op-amp front-end (e.g., AD8138) and a USB or Bluetooth bridge for data offload.
Рекомендуется
Software Defined Radio (SDR) Receiver Front End
The LTC2159CUK's combination of 16-bit resolution, 20 Msps rate, and configurable LVDS/CMOS outputs is well-suited to SDR receiver designs that digitize a low-IF directly from the mixer. Per the LTC2159 datasheet, the on-chip clock duty-cycle stabilizer preserves AC performance even with the variable-duty clocks produced by FPGA PLLs. The differential inputs reject common-mode noise from noisy SDR front-ends. Compared to 14-bit SDR ADCs, the LTC2159CUK adds 2-3 dB of dynamic range, expanding usable receiver sensitivity. Companion MPNs: an RF mixer (e.g., ADL5350) and a Zynq-series SDR SoC for processing.
Рекомендуется
Wideband Data Acquisition Module
For multi-channel wideband data-acquisition modules the LTC2159CUK's low per-channel power and small footprint let designers pack more channels onto a single board. According to the datasheet, the CMOS output mode reduces digital power in board-level designs where LVDS is unnecessary. 16-bit resolution at 20 Msps with 77 dB SNR is sufficient for vibration analysis, acoustic emission monitoring, and industrial ultrasound. Per the Analog Devices datasheet, the internal clock duty-cycle stabilizer simplifies PCB clock-tree design. Companion MPNs: a precision front-end op-amp (e.g., AD8255) and an FPGA.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для LTC2159CUK — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LTC2158CUK | LTC2160CUK | LTC2122CUK | LTC2155CUP-12 | LTC2156IUP-14 |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 48-QFN (7x7) | 48-QFN (7x7) - same | 48-QFN (7x7) - same | 48-QFN (7x7) - same | 48-QFN (7x7) - same | 48-QFN (7x7) - same |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 14 bit | 14 bit |
| Sample Rate | 20 Msps | 20 Msps (dual-channel) | 25 Msps | 10 Msps | 125 Msps | 80 Msps |
| Channels | 1 | 2 | 1 | 1 | 1 | 1 |
| Analog Supply | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Digital Output Modes | CMOS / DDR CMOS / DDR LVDS | CMOS / DDR CMOS / DDR LVDS | CMOS / DDR CMOS / DDR LVDS | CMOS / DDR CMOS / DDR LVDS | CMOS / DDR CMOS / DDR LVDS | CMOS / DDR CMOS / DDR LVDS |
Ключевые отличия
- Combines 16-bit resolution, 20 Msps, and 77 dB SNR in a 48-QFN with very low power (против LTC2155CUP-12)
- Single-channel 16-bit 20 Msps with CMOS and DDR LVDS output options (против LTC2158CUK)
- 20 Msps sample rate with separate analog and digital supplies (против LTC2122CUK)
Заметки по проектированию
Estimated routing from a 16-bit ADC at 20 Msps DDR LVDS: keep digital output traces matched within 0.5 mm and routed over a continuous reference plane. Per the LTC2159 datasheet, the LVDS output swing is approximately 350 mV; route both P/N pairs as a 100 ohm differential microstrip. Keep the analog input traces short and matched to maintain the 77 dB SNR figure.
Estimate: at 20 Msps with a 50 MHz input, sample-clock jitter must stay below 1 ps rms to avoid degrading the 77 dB SNR floor by more than 1 dB. Per the LTC2159 datasheet, use a low-jitter clock source such as the AD9523-1 with the internal clock duty-cycle stabilizer enabled. Do not drive the encode input with a long CMOS trace; convert to a differential LVPECL or LVDS source first.
Per the LTC2159 datasheet, the analog 1.8 V supply draws the bulk of the ADC power; the digital output supply (1.2 V to 1.8 V) power scales with output mode and clock rate. Use a ferrite bead plus bulk/ceramic decoupling network on each supply pin, and tie the exposed pad (EP) to a solid ground plane for both thermal dissipation and ground return. Avoid routing digital outputs across the analog supply region.
Информация о соответствии
Lead-free per #PBF suffix; RoHS/REACH statements from Analog Devices product page. No AEC-Q100 automotive qualification - see industrial-temp options in the alternatives list.
