LTC3115-2EFE#PBF - 40V, 2A Sync Buck-Boost DC/DC | Analog Devices
Артикул: LTC3115-2EFE#PBF ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $9.99 | $9,99 |
| 10 | $8.95 | $89,50 |
| 100 | $7.85 | $785,00 |
| 500 | $6.95 | $3.475,00 |
| 1.000 | $6.25 | $6.250,00 |
LTC3115-2EFE#PBF Обзор
A buck-boost converter is a type of DC-DC converter that can step up or step down an input voltage to produce a regulated output voltage, regardless of whether the input is higher or lower than the output. This makes it ideal for battery-powered systems where the battery voltage can vary above and below the desired rail. The LTC3115-2 belongs to the family of switching regulators, which are power management ICs that use inductive energy storage to achieve high efficiency, often exceeding 90%.
Key features of the LTC3115-2 include a 2A output current capability, a wide 2.7V to 40V input and output range, and a switching frequency programmable from 400kHz to 2MHz. It also features Burst Mode operation for high efficiency at light loads, a 3µA shutdown current, output disconnect in shutdown, short-circuit protection, and internal soft-start. The device is designed to handle fast input voltage transients, making it suitable for automotive and industrial applications where supply voltage can fluctuate rapidly.
The LTC3115-2 uses a current-mode control architecture with a 4-switch synchronous rectifier topology, which minimizes conduction losses and improves efficiency across a wide load range. The device integrates the power switches, reducing external component count and simplifying PCB layout. Its programmable switching frequency allows designers to optimize efficiency versus component size, and the SYNC pin enables synchronization to an external clock for noise-sensitive applications.
Typical applications include automotive power supplies, industrial instrumentation, portable devices, and battery-powered systems where a stable output voltage is required from a varying input source. The LTC3115-2 is particularly well-suited for systems that experience fast input voltage transients, such as those in automotive load-dump conditions or industrial power rails.
When designing with the LTC3115-2, it is important to select the inductor and output capacitors according to the datasheet guidelines to ensure stability and optimal transient response. The exposed pad should be soldered to a large copper area for effective heat dissipation, especially at high output currents.
Аналоги без доработки для LTC3115-2EFE#PBF — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
LTC3115EFE-1#PBF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LTC3115EFE-2#PBF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LTC3115EFE-1#PBF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LTC3115EFE-2#PBF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LTC3115EFE-1#PBF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
LTC3115-2EFE#PBF Максимальные параметры и электрические характеристики
| Функция | Buck-Boost |
| Выходное напряжение | 2.7V to 40V (Adjustable) |
| Output Current | 2A (Max) |
| Диапазон входного напряжения | 2.7V to 40V |
| Частота переключения | 400kHz to 2MHz (Programmable) |
| Синхронный выпрямитель | Yes |
| Burst Mode Operation | Yes |
| Ток выключения | 3µA |
| Output Disconnect in Shutdown | Yes |
| Short-Circuit Protection | Yes |
| Internal Soft-Start | Yes |
| Корпус | 20-Lead TSSOP (FE16) with Exposed Pad |
| Диапазон рабочих температур | -40°C to +125°C |
| RoHS Compliant | Yes |
| Тип монтажа | Surface Mount |
Конфигурация выводов LTC3115-2EFE#PBF
| Контакт 1 | SW1 — Switch node connection for the buck-boost converter |
| Контакт 2 | PVIN1 — Power input supply |
| Контакт 3 | PVIN2 — Power input supply |
| Контакт 4 | VIN — Input supply for internal circuitry |
| Контакт 5 | RUN — Enable pin (active high) |
| Контакт 6 | SYNC — External clock synchronization input |
| Контакт 7 | MODE — Mode selection (Burst Mode or PWM) |
| Контакт 8 | ITH — Error amplifier output for loop compensation |
| Контакт 9 | FB — Feedback input for output voltage regulation |
| Контакт 10 | VOUT — Output voltage sense |
| Контакт 11 | PVOUT1 — Power output |
| Контакт 12 | PVOUT2 — Power output |
| Контакт 13 | SW2 — Switch node connection for the buck-boost converter |
| Контакт 14 | PGND — Power ground |
| Контакт 15 | PGND — Power ground |
| Контакт 16 | SGND — Signal ground |
| Контакт 17 | SS — Soft-start programming pin |
| Контакт 18 | FREQ — Switching frequency programming pin |
| Контакт 19 | VCC — Internal regulated supply output |
| Контакт 20 | EXPOSED PAD — Exposed pad for thermal dissipation, connect to ground |
Типичное применение
LTC3115-2EFE#PBF подходит для 6 применениеs: Automotive Power Supplies, Industrial Instrumentation, Portable Devices, Battery-Powered Systems, Telecom and Networking, Medical Devices.
Automotive Power Supplies
The LTC3115-2EFE#PBF is ideal for automotive power supplies due to its wide 2.7V to 40V input range and ability to handle fast input voltage transients, such as load-dump conditions. It provides a regulated output voltage for various automotive systems, including infotainment, ADAS, and body control modules. Its high efficiency and robust protection features ensure reliable operation in harsh automotive environments.
Рекомендуется
Industrial Instrumentation
In industrial instrumentation, the LTC3115-2EFE#PBF provides a stable output voltage from a varying input source, such as a 24V industrial bus. Its wide input range and programmable switching frequency allow designers to optimize efficiency and component size. The device's fast transient response ensures stable operation in systems with rapidly changing loads, making it suitable for sensors, actuators, and control systems.
Рекомендуется
Portable Devices
The LTC3115-2EFE#PBF is well-suited for portable devices that require a regulated output voltage from a battery that can vary above and below the desired rail. Its Burst Mode operation and low shutdown current (3µA) help extend battery life. The device's small 20-lead TSSOP package and high efficiency make it ideal for space-constrained applications such as handheld instruments and portable medical devices.
Рекомендуется
Battery-Powered Systems
For battery-powered systems, the LTC3115-2EFE#PBF provides a regulated output voltage from a battery whose voltage can drop below the required level. Its wide input range and high efficiency ensure maximum battery life. The device's low shutdown current and Burst Mode operation are particularly beneficial for standby and light-load conditions, making it ideal for IoT devices, remote sensors, and wireless modules.
Рекомендуется
Telecom and Networking
In telecom and networking equipment, the LTC3115-2EFE#PBF provides a stable output voltage from a wide input range, such as 12V or 24V backplane supplies. Its programmable switching frequency allows synchronization to external clocks to minimize noise interference. The device's high efficiency and thermal performance make it suitable for continuous operation in rack-mounted systems.
Рекомендуется
Medical Devices
The LTC3115-2EFE#PBF is suitable for medical devices that require a reliable and regulated power supply from a battery or DC source. Its wide input range and high efficiency ensure consistent performance, while its low shutdown current helps preserve battery life in portable medical equipment. The device's robust protection features, including short-circuit protection and thermal shutdown, enhance safety in critical applications.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для LTC3115-2EFE#PBF — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | LTC3115EFE-1#PBF |
|---|---|---|
| Package | 20-Lead TSSOP (FE16) | 20-Lead TSSOP (FE16) |
| Brand | Analog Devices | Analog Devices |
| Input Voltage Range | 2.7V to 40V | 2.7V to 40V |
| Output Current | 2A | 2A |
| Switching Frequency | 400kHz to 2MHz | 400kHz to 2MHz |
| Burst Mode | Yes | Yes |
| Shutdown Current | 3µA | 3µA |
| Optimized for Fast Transients | Yes | No |
Ключевые отличия
- Optimized for fast input voltage transients (против LTC3115EFE-1#PBF)
- Wide input and output voltage range (против LTC3115EFE-1#PBF)
- High efficiency with Burst Mode (против LTC3115EFE-1#PBF)
Заметки по проектированию
For optimal thermal performance, solder the exposed pad of the 20-lead TSSOP package to a large copper area on the PCB. Use multiple vias to connect the pad to the ground plane, which helps dissipate heat and reduce thermal resistance. Ensure adequate copper pour for high current paths, especially for the input and output power connections.
Keep the switching node (SW1, SW2) traces short and wide to minimize parasitic inductance and EMI. Place the input and output capacitors as close as possible to the IC pins. Use a ground plane to provide a low-impedance return path for high-frequency currents. Separate the power ground (PGND) from the signal ground (SGND) to avoid noise coupling.
Do not exceed the absolute maximum ratings for input voltage (40V) and output voltage (40V). Ensure the inductor is rated for the peak current and saturation current. Use appropriate compensation components on the ITH pin to ensure loop stability. Verify the soft-start capacitor value to control inrush current during startup.
Информация о соответствии
RoHS compliant per Analog Devices product page. AEC-Q100 qualification not specified for this part.
