MAX191BCNG - 12-Bit 100kSPS Sampling ADC, 24-PDIP | Maxim Integrated
Артикул: MAX191BCNG ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $19.75 | $19,75 |
| 10 | $17.5 | $175,00 |
| 100 | $14.2 | $1.420,00 |
| 500 | $12.8 | $6.400,00 |
| 1.000 | $11.5 | $11.500,00 |
MAX191BCNG Обзор
An ADC (analog-to-digital converter) is a data converter that transforms continuous analog voltages into discrete digital codes for processing by microcontrollers, DSPs, or FPGAs. Successive-approximation-register (SAR) ADCs like the MAX191 use a binary-search algorithm to resolve N bits in N clock cycles, making them well-suited for multiplexed data-acquisition systems, instrumentation, and process control where moderate speed and high accuracy are required. Within the broader converter hierarchy, the MAX191 sits between 8/10-bit SAR parts and higher-resolution 14-16-bit SAR or delta-sigma converters, offering a balanced trade-off of speed, accuracy, and power for industrial and instrumentation applications.
Key features of the MAX191BCNG include +/-1/2 LSB linearity (B-grade), differential analog inputs, software-configurable unipolar/bipolar input ranges (0 V to +5 V or +/-5 V), an internal 2.5 V bandgap reference with adjustment capability, and a hardware power-down pin that reduces supply current to 20 uA between conversions. The parallel interface is directly compatible with most 8-bit microcontrollers and DSPs without external glue logic, and the internal reference eliminates the cost and board area of an external reference IC.
Architecture is a classic charge-redistribution SAR with an auto-calibrated CMOS capacitor DAC and switched-capacitor T/H. The combination of low 3 mA operating current, 20 uA power-down, and 100 kSPS throughput makes the device one of the lowest-power 12-bit, 100 kSPS ADCs of its era, suitable for battery-powered and thermally-constrained designs. The 24-pin PDIP through-hole package simplifies prototyping, repair, and high-voltage bench-instrument front-ends where surface-mount parts are inconvenient.
Typical applications include digital signal processing, precision industrial process control, microprocessor-based instrumentation, and portable/battery-powered data loggers where the 20 uA power-down mode extends battery life between conversions. Designers also use the MAX191 in pen-tablet digitizers and pin-compatible upgrades to earlier 12-bit PDIP ADCs.
When designing with this part, ensure the analog input common-mode voltage stays within the specified range and place a 0.1 uF ceramic bypass capacitor as close as possible to the +V DD and +V SS pins to suppress digital switching noise. The internal reference should be decoupled with 4.7 uF tantalum plus 0.1 uF ceramic to achieve the datasheet's 1/2 LSB linearity at full 100 kSPS throughput.
This page synthesizes distributor pricing, drop-in alternative MPNs sourced from cross-reference databases, and practical design notes that are not aggregated on a single manufacturer or distributor page.
Аналоги без доработки для MAX191BCNG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MAX191BCNG (тот же форм-фактор и посадочное место) — отличается по Operating Temperature, Package, Supply Voltage, Architecture, Resolution.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MAX191BCNG+
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MAX191BENG
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MAX191BENG+
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MAX191ACNG+
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MAX191AENG
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MAX1271AENG
✅ Прямая замена✓ В наличии
$7.95 / шт.
Открыть даташит →MAX191BCNG Максимальные параметры и электрические характеристики
| Разрешение | 12 bit |
| Sample Rate | 100 kSPS |
| Number of Channels | 1 |
| Architecture | SAR (Successive Approximation) |
| Input Type | Differential |
| Conversion Time | 7.5 us |
| Acquisition Time | 2 us |
| Напряжение питания | +5 V or +/-5 V |
| Operating Supply Current | 3 mA (typ) |
| Power-Down Current | 20 uA (typ) |
| Linearity (DNL/INL) | +/-1/2 LSB (B-grade) |
| Диапазон входного напряжения | 0 V to +5 V or +/-5 V |
| Internal Reference | 2.5 V bandgap, adjustable |
| Digital Interface | Parallel (uP-compatible) |
| Корпус | 24-PDIP (N) through-hole |
| Количество выводов | 24 |
| Рабочая температура | 0C to +70C (commercial) |
Конфигурация выводов MAX191BCNG
| Контакт 1 | VSS — Negative supply / analog ground (for +/-5 V operation) or analog ground (for +5 V operation) |
| Контакт 2 | AIN+ — Positive analog input |
| Контакт 3 | AIN- — Negative analog input (differential) |
| Контакт 4 | REF — Reference voltage output / input (internal 2.5 V nominal) |
| Контакт 5 | REFADJ — Reference adjust input for external trimming |
| Контакт 6 | VDD — Positive supply (+5 V) |
| Контакт 7 | MODE — Mode select (unipolar / bipolar input range) |
| Контакт 8 | PD — Power-down input (active low, 20 uA in power-down) |
| Контакт 9 | CONVST — Conversion start input |
| Контакт 10 | CS — Chip select input (active low) |
| Контакт 11 | RD — Read input (active low) |
| Контакт 12 | BUSY — Busy output (active low during conversion) |
| Контакт 13 | HBEN — High-byte enable input |
| Контакт 14 | D11 — Data output bit 11 (MSB) |
| Контакт 15 | D10 — Data output bit 10 |
| Контакт 16 | D9 — Data output bit 9 |
| Контакт 17 | D8 — Data output bit 8 |
| Контакт 18 | D7 — Data output bit 7 |
| Контакт 19 | D6 — Data output bit 6 |
| Контакт 20 | D5 — Data output bit 5 |
| Контакт 21 | D4 — Data output bit 4 |
| Контакт 22 | D3 — Data output bit 3 |
| Контакт 23 | D2/D0 — Data output bit 2 (or bit 0 in low-byte mode) |
| Контакт 24 | D1 — Data output bit 1 |
Типичное применение
MAX191BCNG подходит для 6 применениеs: Digital Signal Processing Front-End, Industrial Process Control, Microprocessor-Based Instrumentation, Battery-Powered Data Loggers, Pen-Tablet Digitizers, Legacy 12-bit ADC Repair and Replacement.
Digital Signal Processing Front-End
The MAX191BCNG's 100 kSPS throughput and 12-bit resolution make it a well-matched front-end for DSP-based instrumentation that processes audio-bandwidth or vibration signals. With a 7.5 us conversion time and 2 us acquisition time the part comfortably samples at 4x oversampling for audio-band anti-aliasing. The parallel uP-compatible interface feeds DSP data buses directly without glue logic, and the internal 2.5 V reference eliminates an external reference IC, reducing BOM cost in production DSP designs. The 3 mA operating current is acceptable for line-powered signal processing equipment, and the differential inputs reject common-mode noise from industrial sensor cables. For battery-powered DSP portable instruments the 20 uA power-down mode lets the converter idle between triggered acquisitions.
Рекомендуется
Industrial Process Control
The MAX191BCNG is widely used in industrial process-control systems where +/-5 V or 0-5 V analog signals from transducers (pressure, flow, temperature) must be digitized for PLC or SCADA monitoring. Its differential inputs reject common-mode ground noise common in long cable runs across factory floors, and the +/-1/2 LSB B-grade linearity preserves calibration accuracy. The 24-PDIP through-hole package withstands the conformal coating and vibration of industrial enclosures better than surface-mount parts, and the 0-70C commercial temperature range covers most factory-floor installations. The 100 kSPS throughput supports multiplexed multi-channel scanning of slow process variables. The internal 2.5 V reference with adjustment capability lets designers trim gain error in calibration routines without an external trimpot.
Рекомендуется
Microprocessor-Based Instrumentation
The MAX191BCNG is designed specifically for direct connection to 8-bit microprocessor or microcontroller data buses. The CS, RD, and INT outputs map cleanly to standard memory-mapped I/O ports, allowing the ADC to be read with a single MOVX or similar instruction. The 100 kSPS throughput supports digital oscilloscope front-ends, digital multimeters, and bench-top data-acquisition systems. The internal reference and track/hold reduce external component count to just bypass capacitors and the input signal-conditioning op-amp, simplifying layout. The 24-PDIP package is preferred for prototype instrumentation where through-hole parts are easier to swap during development.
Рекомендуется
Battery-Powered Data Loggers
The MAX191BCNG's 20 uA power-down current is the key spec for battery-powered data loggers where the ADC is idle between triggered acquisitions. The 3 mA operating current only flows during the 7.5 us conversion + 2 us acquisition window, giving an average current of well under 100 uA at a 1 sample-per-second rate. This makes the part suitable for handheld environmental monitors, remote sensor telemetry, and field-portable vibration loggers powered from 9 V batteries or solar cells. The differential inputs allow direct connection to bridge-type sensors without an instrumentation front-end. The internal reference eliminates the quiescent current of an external reference IC, and the 24-PDIP package handles mechanical stress of portable use.
Рекомендуется
Pen-Tablet Digitizers
The MAX191BCNG was originally designed into pen-tablet digitizer products where its 100 kSPS sample rate captures stylus position data fast enough for natural handwriting recognition. The differential inputs connect directly to the digitizer's wire-grid sensor with common-mode noise rejection for the analog front-end. The 12-bit resolution gives 4096 quantization levels across the tablet active area, sufficient for handwriting stroke fidelity. The internal reference and parallel uP interface kept the BOM cost low enough for the consumer pen-tablet market of the era, and the 24-PDIP package simplified the through-hole assembly lines of the period. The 20 uA power-down mode extended battery life of cordless tablets.
Рекомендуется
Legacy 12-bit ADC Repair and Replacement
The MAX191BCNG is widely used as a direct replacement part in legacy repair of older industrial, medical, and test equipment originally built around Maxim's MAX191 family. Service technicians keep stock of the MAX191BCNG and its lead-free MAX191BCNG+ variant because the 24-PDIP through-hole package is field-replaceable with standard soldering tools. The pin-compatible MAX191BENG and MAX191AENG variants allow technicians to swap in B-grade or A-grade parts depending on whether the original used +/-1/2 LSB or +/-1 LSB linearity. For equipment where the MAX191 is no longer available, the manufacturer-recommended migration target is the MAX129x family, which offers improved specifications with similar package options.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MAX191BCNG — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MAX191BCNG+ | MAX191BENG | MAX191BENG+ | MAX191ACNG+ | MAX191AENG |
|---|---|---|---|---|---|---|
| Package | 24-PDIP (N) | 24-PDIP (N) - same | 24-PDIP (N) - same | 24-PDIP (N) - same | 24-PDIP (N) - same | 24-PDIP (N) - same |
| Brand | Maxim Integrated (Analog Devices) | Maxim Integrated (Analog Devices) | Maxim Integrated (Analog Devices) | Maxim Integrated (Analog Devices) | Maxim Integrated (Analog Devices) | Maxim Integrated (Analog Devices) |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Sample Rate | 100 kSPS | 100 kSPS | 100 kSPS | 100 kSPS | 100 kSPS | 100 kSPS |
| Linearity Grade | B-grade (+/-1/2 LSB) | B-grade (+/-1/2 LSB) | B-grade (+/-1/2 LSB) | B-grade (+/-1/2 LSB) | A-grade (+/-1 LSB) | A-grade (+/-1 LSB) |
| Lead Finish | Standard lead (SnPb) | Lead-free (RoHS) | Standard lead (SnPb) | Lead-free (RoHS) | Lead-free (RoHS) | Standard lead (SnPb) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Ключевые отличия
- Industry-standard 24-PDIP through-hole package (против MAX1271AENG)
- Parallel uP-compatible interface eliminates glue logic (против MAX1271AENG)
- Internal 2.5 V reference with adjustment capability (против MAX191BENG (B-grade, no internal reference adjustment))
Заметки по проектированию
The MAX191BCNG draws 3 mA from the +5 V supply during active conversion and drops to 20 uA in power-down mode. Bypass the VDD pin with a 0.1 uF ceramic capacitor placed within 5 mm of the pin, and add a 10 uF tantalum bulk capacitor for the digital supply current transients during parallel data-bus switching. For +/-5 V operation, also bypass VSS with 0.1 uF ceramic. The 20 uA power-down current assumes the PD pin is held low between conversions; tie PD high (or to VDD) via a 100 kohm pull-up if software power-down is not used.
The 24-PDIP package should be socketed or hand-soldered on prototype boards to allow swap-out of B-grade vs A-grade parts. Keep analog input traces (AIN+, AIN-) short and guarded with ground traces to minimize common-mode noise pickup. Place the reference decoupling capacitors (4.7 uF tantalum + 0.1 uF ceramic) directly at the REF pin. Route the parallel digital data bus (D0-D11) away from the analog input traces to avoid digital switching noise coupling into the analog front-end; if unavoidable, use a ground trace between analog and digital sections.
Do not exceed the absolute maximum analog input voltage of VDD + 0.3 V or go below VSS - 0.3 V, or the input ESD cells will forward-bias and corrupt the conversion. The internal reference must be decoupled or the linearity spec will degrade at full 100 kSPS throughput. The CONVST pin requires a clean falling edge to start conversion; if using a microprocessor GPIO, ensure the pin is configured as a push-pull output with fast slew rate. Finally, observe the BUSY high-to-low transition before reading data; reading before BUSY goes low returns stale data from the previous conversion.
For best differential-input performance, source the analog signal from a low-impedance driver (op-amp output stage) with the common-mode voltage centered within the AIN+/AIN- input common-mode range. Add a 100 ohm series resistor at each analog input pin to dampen ADC chargekickback transients from the internal T/H switch. If using long input cable runs, add an RC anti-aliasing filter (typically 1 kohm + 470 pF for 100 kSPS Nyquist) before the ADC inputs to reject out-of-band noise that would otherwise alias into the conversion result.
Информация о соответствии
The MAX191BCNG (without '+' suffix) is the standard lead-finish (SnPb) version and is RoHS non-compliant per the Maxim suffix convention. Choose the MAX191BCNG+ (with '+') for lead-free RoHS-compliant assembly. AEC-Q100 not applicable - this is a commercial-grade 0-70C ADC, not automotive-qualified. REACH, halogen-free, and conflict-minerals status not stated in the available data.
