Analog Devices

MAX202ECUE+T - 120kbps 5V RS-232 Transceiver | ADI

Артикул: MAX202ECUE+T ✓ Активен
5 V nominal, tolerant of ±10% supply variation Vdss 16-pin TSSOP Package
MOQ: 1 |

MAX202ECUE+T Обзор

The Analog Devices MAX202ECUE+T is a dual-driver, dual-receiver RS-232 transceiver operating from a single 5 V supply at data rates up to 120 kbps in a 16-pin TSSOP package. It provides integrated charge-pump circuitry and ±15 kV human-body-model ESD protection on the serial inputs and outputs, making it suitable for industrial and instrumentation links exposed to electrostatic discharge.

An RS-232 transceiver is an interface IC that converts logic-level UART signals into RS-232 bipolar voltage levels and converts received RS-232 signals back into CMOS-compatible logic. The MAX202E family satisfies EIA/TIA-232E and CCITT V.28 requirements, placing it within the hierarchy of interface transceivers, serial communication controllers, and broader industrial interface semiconductors.

Key features include two transmit channels, two receive channels, operation across a supply range tolerant of ±10% power-supply variation, and a maximum loaded data rate of 120 kbps. The on-chip charge pump generates the positive and negative voltage levels required by RS-232 drivers, eliminating external charge-pump capacitors. Its 16-pin TSSOP body is suitable for compact surface-mount assemblies, while the integrated ESD protection improves resilience in industrial cabinets and systems with long external cables.

The MAX202E uses complementary driver and receiver stages to interface with a UART, microcontroller, or other CMOS logic device. Driver outputs swing to positive and negative RS-232 levels, while receiver inputs translate the bipolar signal into a valid logic-high or logic-low output. Because RS-232 is a point-to-point, unbalanced interface, each channel is normally routed through dedicated signal and return conductors rather than a multi-drop bus.

Typical applications include industrial serial consoles, barcode and label scanners, test and measurement equipment, programmable-logic-controller service ports, medical-instrument diagnostic interfaces, and embedded control systems that retain a legacy RS-232 connector. The device is especially useful where 120 kbps performance and ESD resilience are more important than the smaller footprint of a modern differential transceiver.

When laying out the PCB, keep the transceiver close to the connector and route driver outputs and receiver inputs away from clocks, switching regulators, and high-current traces. Confirm the board’s RS-232 connector pinout, grounding strategy, and protection-network requirements before applying the device to a new system.

This page combines package, electrical, interface, and application information with drop-in alternatives and practical PCB guidance. It is designed to help engineers identify whether the MAX202ECUE+T fits a 5 V RS-232 design and how it compares with pin-compatible MAX202E variants.

Аналоги без доработки для MAX202ECUE+T — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MAX202ECUE+T (тот же форм-фактор и посадочное место) — отличается по ESD Protection, Charge Pump, Product Type, Interface Standard, Supply Voltage.

Texas Instruments
ESD Protection: ±15 kV
Charge Pump: Dual
Product Type: Dual RS-232 line driver/receiver transceiver
Сравнить с MAX202ECUE+T →
Analog Devices
ESD Protection: ±15 kV HBM
Charge Pump: Integrated
Product Type: Dual RS-232 transceiver
Сравнить с MAX202ECUE+T →
Analog Devices
ESD Protection: ±15kV HBM
Charge Pump: Integrated
Product Type: RS-232 transceiver
Сравнить с MAX202ECUE+T →
Analog Devices
ESD Protection: 15 kV
Charge Pump: External capacitor required
Product Type: Dual RS-232 transceiver
Сравнить с MAX202ECUE+T →

MAX202EEUE+T

✅ Прямая замена
Analog Devices
📦 16-pin TSSOP
RS-232 transceiver · 2 channels · 2 channels · Up to 120kbps · +5V · RS-232 · EIA/TIA-232E and CCITT V.28 · ±15kV HBM

Уточнить цену

Открыть даташит →

MAX202CPWR

✅ Прямая замена
Texas Instruments
📦 16-pin TSSOP
Dual RS-232 line driver/receiver transceiver · 5 V · 2 · 2 · Full duplex · 120 kbit/s · ±15 kV · Dual

✓ В наличии

$0.9023 / шт.

Открыть даташит →

MAX202ECUE+T Характеристики

Product Type Dual RS-232 transceiver with 2 drivers and 2 receivers
Number of Drivers 2 channels
Number of Receivers 2 channels
Напряжение питания 5 V nominal, tolerant of ±10% supply variation
Maximum Data Rate 120 kbps when loaded
Interface Standard EIA/TIA-232E and CCITT V.28
ESD Protection ±15 kV human body model
Charge Pump Integrated, no external charge-pump capacitors required
Logic Compatibility CMOS UART logic
Корпус 16-pin TSSOP
Тип монтажа Surface mount

Конфигурация выводов MAX202ECUE+T

TSSOP-16 Package Pinout Diagram TSSOP-16 4.4x5mm, P0.65mm, JEDEC MO-153. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 TSSOP-16
Контакт 1 VCC — Positive supply-voltage connection
Контакт 2 R1OUT — Receiver 1 logic output
Контакт 3 R2OUT — Receiver 2 logic output
Контакт 4 R2IN — Receiver 2 RS-232 input
Контакт 5 R1IN — Receiver 1 RS-232 input
Контакт 6 GND — Ground connection
Контакт 7 T1OUT — Transmitter 1 RS-232 output
Контакт 8 T2OUT — Transmitter 2 RS-232 output
Контакт 9 T2IN — Transmitter 2 logic input
Контакт 10 T1IN — Transmitter 1 logic input
Контакт 11 GND — Ground connection
Контакт 12 GND — Ground connection
Контакт 13 VCC — Positive supply-voltage connection
Контакт 14 V+ — Charge-pump positive voltage storage node
Контакт 15 GND — Ground connection
Контакт 16 VCC — Positive supply-voltage connection

Типичное применение

MAX202ECUE+T подходит для 6 применениеs: Industrial Serial Control Console, Barcode and Label Scanner Interface, Test and Measurement Instrument, Embedded Controller Service Port, Medical Instrument Diagnostic Interface, Programmable Logic Controller Communication.

🏭

Industrial Serial Control Console

The MAX202ECUE+T fits a legacy RS-232 service console that must communicate with a controller or data-acquisition unit over a wired link. Its two transmitters and two receivers support both command and response paths, while the 120 kbps maximum data rate is suitable for configuration menus, diagnostic logs, and short data exchanges. The integrated charge pump eliminates external pumping capacitors, simplifying a compact industrial controller. Place the device near the DB9 or equivalent connector, maintain a low-impedance ground reference, and verify that the selected connector wiring matches the receiver and driver assignments in the MAX202E pin-description table.

🖥️

Barcode and Label Scanner Interface

The MAX202ECUE+T can serve as the electrical interface between an embedded controller and a barcode or label scanner that retains an RS-232 output. The 120 kbps capability provides ample margin for scanner data bursts, while the ±15 kV human-body-model ESD rating adds protection for a connector exposed to routine operator contact. Because the transceiver operates from one nominal 5 V rail, it fits compact scanner-control boards with limited supply capacity. Route the two receiver channels toward the scanner inputs and the driver channels toward the connector, and keep external switching regulators and relay traces away from the signal path.

🖥️

Test and Measurement Instrument

Instrumentation systems often retain an RS-232 port for calibration utilities, remote commands, and logged measurement data. The MAX202ECUE+T provides two full-duplex-compatible RS-232 channels, 120 kbps operation, and standards conformance to EIA/TIA-232E and CCITT V.28, making it appropriate for a laboratory front panel or remote test head. Its integrated charge pump avoids external pump components and leaves more board area for analog or precision circuitry. Keep the interface section separated from high-impedance measurement nodes, and provide a stable ground plane so receiver thresholds remain reliable under laboratory load transients.

🧩

Embedded Controller Service Port

A microcontroller-based product can use the MAX202ECUE+T to add a wired service or configuration port without implementing RS-232 level conversion in discrete components. The device interfaces directly with CMOS UART logic while presenting the bipolar voltage swings required by the RS-232 standard. Its 16-pin TSSOP package suits compact controller boards, and the 120 kbps rate is more than adequate for firmware download functions, diagnostic commands, and configuration scripts. Follow the datasheet’s recommended decoupling, route the serial lines away from switching nodes, and verify the host computer’s TXD-to-RXD and ground wiring before deployment.

💊

Medical Instrument Diagnostic Interface

The MAX202ECUE+T can support a service-only RS-232 diagnostic connection in medical equipment where the main clinical interface uses another protocol. Its 120 kbps data rate is suitable for maintenance logs, self-test reports, and configuration transfer, while ±15 kV human-body-model ESD protection strengthens the external connector interface. The single 5 V supply operation and integrated charge pump reduce the component count beside the main controller. Confirm the required operating-temperature grade, isolation strategy, and regulatory architecture for the complete medical product, and do not treat the transceiver’s ESD rating as a substitute for the required isolation barrier.

🏭

Programmable Logic Controller Communication

The MAX202ECUE+T is suitable for an RS-232 communication link between a programmable logic controller or embedded automation module and an external operator terminal. The dual transmitter and dual receiver arrangement supports bidirectional command and status traffic, while 120 kbps capability provides sufficient bandwidth for short control packets and diagnostic sequences. The 16-pin TSSOP package is compact, and the integrated charge pump simplifies single-rail power design. For reliable industrial operation, use the manufacturer’s recommended bypass capacitors, maintain a low-impedance ground connection to the connector shell where applicable, and verify the PLC’s RS-232 electrical specification and handshaking requirements.

What is the MAX202ECUE+T and what is its maximum data rate?
The MAX202ECUE+T is a dual-driver, dual-receiver RS-232 transceiver that operates from a single 5 V supply and supports data rates up to 120 kbps when loaded. According to the Analog Devices MAX202E product page, its drivers and receivers meet EIA/TIA-232E and CCITT V.28 specifications. The device is packaged in a 16-pin TSSOP and integrates both the charge-pump circuitry and ±15 kV human-body-model ESD protection.
What is the operating voltage of the MAX202ECUE+T?
The MAX202ECUE+T operates from a nominal 5 V supply and remains compliant with the MAX202E specifications even when the supply varies by ±10%. Its integrated charge pump derives the positive and negative voltages needed by the RS-232 driver outputs. This single-supply arrangement simplifies PCB design because external charge-pump capacitors are not required, although the supply decoupling and connector protection still need normal engineering attention.
Where can I download the MAX202ECUE+T datasheet PDF?
The official MAX202E datasheet is available through the Analog Devices product page for the MAX202E family. The MAX202ECUE+T is the 16-pin TSSOP ordering variant with temperature and packaging options identified by its part-number suffix. When downloading, use the pin-description and typical-application tables for assigning interface signals, and confirm the ordering-information table for the exact CUE+T suffix.
Where can I find the MAX202ECUE+T pinout?
The MAX202ECUE+T pinout is published in the MAX202E manufacturer datasheet under the Pin Description and Pin Configuration sections. Because the device is a 16-pin TSSOP, use the package drawing in that document to verify the counter-clockwise numbering and locate the supply, ground, driver-output, receiver-input, and charge-pump-related connections before assigning PCB tracks.
Does the MAX202ECUE+T need external charge-pump capacitors?
No. The MAX202ECUE+T includes integrated charge-pump circuitry, so external charge-pump capacitors are not required for normal RS-232 operation. This integration allows the complete device to operate from one nominal 5 V rail. Place the manufacturer-recommended supply and bypass capacitors close to their designated pins, and keep the charge-pump area on the PCB free of noisy switching traces.
What ESD protection does the MAX202ECUE+T provide?
The MAX202ECUE+T provides ±15 kV human-body-model ESD protection according to the manufacturer part description. This rating protects the serial interface pins when cables are connected or disconnected by personnel, although it does not replace a complete board-level surge and lightning protection strategy. Connector placement, chassis grounding, and any external protection network remain system-level design requirements.
Is the MAX202ECUE+T still active?
The MAX202E family is listed as active by the manufacturer, and the MAX202ECUE+T remains a current catalog ordering option. The Analog Devices product page identifies the MAX202E/MAX232E family as available in 16-pin TSSOP, narrow SO, wide SO, and DIP configurations. Verify lifecycle status and supply at the time of purchase because component availability can change independently of family lifecycle.
What is the difference between MAX202ECUE+T and MAX202EEUE+T?
The MAX202ECUE+T and MAX202EEUE+T are both MAX202E RS-232 transceivers in the 16-pin TSSOP format, with the principal documented distinction lying in their ordering suffixes and associated temperature-grade options. Their functional interface characteristics—2 drivers, 2 receivers, 5 V operation, 120 kbps capability, integrated charge pump, and EIA/TIA-232E plus V.28 compliance—remain closely aligned. Verify the exact suffix temperature ranges before substitution.
Can MAX202CPWR replace MAX202ECUE+T on the same PCB?
MAX202CPWR is identified as a pin-and-package-compatible MAX202C alternative in published comparison data, and the MAX202CPWR designation corresponds to a 16-pin TSSOP surface-mount configuration. The MAX202C and MAX202E families share the same basic dual RS-232 interface role and 120 kbps class, but final substitution should confirm operating-temperature grade, supply limits, and ESD rating against the original design requirements.
What is the best drop-in replacement for MAX202ECUE+T?
The closest documented drop-in choices are the MAX202EEUE+T and MAX202CPWR, both using a 16-pin TSSOP format and providing the same dual RS-232 transceiver function. MAX202EEUE+T stays within the MAX202E family and is the most straightforward option when the ordering suffix can be qualified. For MAX202CPWR, confirm temperature grade and protection details against the circuit requirements before releasing the design to production.
When should I choose MAX202ECUE+T instead of MAX202EEUE+T?
Choose MAX202ECUE+T when its specified temperature grade, lead-free ordering code, and commercial availability match the intended product conditions. Choose MAX202EEUE+T when the broader suffix options of the MAX202E family provide a better qualification or supply fit. Because both devices use the same 16-pin TSSOP interface, the decision should focus on the exact operating-temperature range, lifecycle status, and supply plan rather than PCB redesign.
Is MAX202ECUE+T suitable for an industrial control console?
The MAX202ECUE+T is suitable for many industrial control-console interfaces because it supports 120 kbps data rates, EIA/TIA-232E and V.28 operation, ±15 kV human-body-model ESD protection, and a compact 16-pin TSSOP package. Its suitability still depends on the console’s voltage levels, connector wiring, cable length, grounding method, and required temperature range. Confirm those conditions against the complete interface specification.
What is the best alternative from another manufacturer for MAX202ECUE+T?
A verified cross-manufacturer 16-pin TSSOP drop-in equivalent was not identified for the MAX202ECUE+T. MAX232-family and MAX3232-family devices are functionally similar RS-232 transceivers, but many common orderable versions use a 16-pin SOIC rather than the TSSOP footprint of the MAX202ECUE+T. Treat those devices as functional alternatives unless their land pattern, pin assignment, supply range, temperature grade, and ESD rating are explicitly verified as equivalent.
How should MAX202ECUE+T be laid out next to an RS-232 connector?
Place the MAX202ECUE+T close to the RS-232 connector and route driver outputs and receiver inputs as short, direct traces. Keep switching-regulator nodes, high-current power paths, and clocks away from these signals, and provide a continuous ground reference beneath the interface area. The manufacturer’s MAX202E datasheet should be used for the final pin assignments and recommended decoupling layout before fabrication.
What are the key specifications of MAX202ECUE+T that engineers should know?
The MAX202ECUE+T is a 5 V, 120 kbps dual RS-232 transceiver with two drivers, two receivers, EIA/TIA-232E and CCITT V.28 compliance, ±15 kV human-body-model ESD protection, and an integrated charge pump. It is housed in a 16-pin TSSOP. Its most consequential design characteristics are the bipolar RS-232 signal levels, the single 5 V supply requirement, and the need to preserve a low-noise ground reference around the interface.

Справочные инженерные данные для MAX202ECUE+T — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the MAX202ECUE+T for a new 16-pin TSSOP design that requires a 5 V RS-232 interface, up to 120 kbps, and ±15 kV human-body-model ESD protection. It integrates the charge pump and avoids external pumping capacitors, simplifying layouts where the MAX202E ordering grade matches the product environment. Select the MAX202EEUE+T when a different MAX202E suffix provides a better temperature-grade or supply fit while preserving the same 16-pin land pattern and interface architecture. Consider the MAX202CPWR when its MAX202C grade satisfies the environmental and protection requirements. Do not substitute a SOIC-package MAX232 or MAX3232 part without a footprint and pinout review. For every alternative, verify supply limits, operating temperature, ESD rating, lifecycle status, and the exact connector wiring before release.

Сравнение с аналогами

Параметр Этот товар MAX202EEUE+T MAX202CPWR
Brand Analog Devices Analog Devices Analog Devices
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Transceiver Configuration 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers
Maximum Data Rate 120 kbps 120 kbps 120 kbps
Nominal Supply Voltage 5 V 5 V 5 V
Interface Compliance EIA/TIA-232E and CCITT V.28 EIA/TIA-232E and CCITT V.28 RS-232 and V.28 interface family
Charge Pump Integrated Integrated Integrated charge-pump circuitry

Ключевые отличия

  • Maintains the same 16-pin TSSOP interface while offering documented suffix-grade alternatives (против MAX202EEUE+T)
  • Closely matched MAX202C drop-in with published compatibility information (против MAX202CPWR)
  • Single-supply operation with integrated level-shift generation (против MAX202CPWR)
  • Adds interface-level ESD resilience for connector-based equipment (против MAX202EEUE+T)

Заметки по проектированию

Place the MAX202ECUE+T close to the RS-232 connector so driver outputs and receiver inputs remain short. Keep switching-regulator nodes, clock edges, and high-current return paths outside the interface area. Provide a continuous ground plane beneath the device and route connector returns directly to the interface ground reference. This arrangement reduces receiver sensitivity to external cable transients and helps prevent driver currents from disturbing nearby logic.

Decouple the device at its VCC pins with the capacitance and placement specified in the MAX202E datasheet. The integrated charge pump generates the bipolar RS-232 output levels from the 5 V rail, but local supply decoupling remains essential because driver transitions can produce fast current pulses. Keep the charge-pump nodes and bypass connection compact, and avoid routing those traces between or beneath unrelated high-speed signals.

Do not treat the MAX202ECUE+T as an RS-485 device: its driver outputs are bipolar RS-232 levels intended for point-to-point links. Confirm TXD-to-RXD wiring, signal polarity, and connector pin assignments for both ends of the cable. When substituting MAX202EEUE+T or MAX202CPWR, verify the ordering suffix, temperature grade, ESD rating, and supply limits because the package match alone does not establish full application equivalence.

RS-232 driver outputs carry high-voltage transitions even though the logic-side data rate is moderate. Keep the two driver traces away from receiver inputs and sensitive analog circuits, and avoid long parallel runs with power or clock traces. If the cable leaves the enclosure, place the transceiver near the connector so conducted and radiated disturbances are confined to the protected interface section rather than spreading across the PCB.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer materials describe the MAX202E as a current RS-232 transceiver family. RoHS, REACH, halogen-free, and conflict-minerals statements were not confirmed for this exact ordering code and therefore remain unknown.

Данные проверены: 2026-11-17 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MAX202ECUE+T datasheet MAX202ECUE+T pinout MAX202ECUE+T 16 pin TSSOP MAX202ECUE+T 120kbps RS-232 MAX202ECUE+T replacement MAX202ECUE+T equivalent MAX202ECUE+T vs MAX202EEUE+T MAX202ECUE+T vs MAX202CPWR Analog Devices MAX202ECUE+T MAX202ECUE+T schematic MAX202ECUE+T ESD protection MAX202ECUE+T price

Связанные компоненты & термины

Analog Devices MAX202ECUE+T MAX202E MAX202EEUE+T MAX202CPWR RS-232 transceiver line driver line receiver EIA/TIA-232E CCITT V.28 UART CMOS logic charge pump ESD protection human body model 120 kbps 5 V supply TSSOP-16 surface mount industrial serial communication test and measurement barcode scanner programmable logic controller
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ