Analog Devices

MAX232BEASE+T - 2Tx/2Rx RS-232 Transceiver | Analog Devices

Артикул: MAX232BEASE+T ✓ Активен
+5 V Vdss 16-pin SOIC Package
MOQ: 1 |

MAX232BEASE+T Обзор

The Analog Devices MAX232BEASE+T is a +5 V-powered RS-232 interface transceiver with two transmit channels, two receive channels, and a 16-pin SOIC package. Its specified operating-temperature range is -40°C to +125°C, making it suitable for industrial equipment, embedded systems, and serial-interface subsystems that require a compact, extended-temperature communications solution.

An RS-232 transceiver is an interface IC that bridges the voltage levels used by a host or controller and those used by an RS-232 link. The transmitter portion converts logic-level signals into RS-232-compatible levels, while the receiver portion converts incoming RS-232 signals back into logic-compatible levels. This transceiver category belongs to the broader hierarchy of interface IC, communications IC, and semiconductor.

The MAX232BEASE+T provides a 2/2 full-duplex RS-232 arrangement, meaning that two channels can transmit while two other channels receive. Its +5 V supply operation supports integration with conventional 5 V digital logic. The 16-SOIC package offers a small, surface-mountable footprint, while the -40°C to +125°C rating provides broad temperature coverage for demanding equipment.

RS-232 transceivers are especially useful where point-to-point serial communication must cross a larger voltage range than a CMOS or TTL interface provides. Practical implementations place the transceiver between a UART or communications controller and an external DB9 or equivalent RS-232 connector. Signal integrity depends on correct grounding, cable routing, connector implementation, and compliance with the applicable interface requirements for the finished system.

Typical applications include industrial serial consoles, test and measurement equipment, instrumentation, embedded control systems, and legacy peripheral connections. The two transmitters support independent outgoing channels, while the two receivers support dual incoming paths. Such a configuration can simplify designs that need bidirectional status exchange, acknowledgments, or simultaneous data collection without adding two separate interface packages.

When designing around the MAX232BEASE+T, use the manufacturer pin-description table when assigning PCB nets and preserve the component orientation defined by the pin-1 marker. Decoupling connections and connector protection must follow the layout and application guidance in the MAX232 manufacturer documentation. Firmware should also treat RS-232 as an unbalanced, point-to-point interface rather than a long-distance multidrop network.

This product page consolidates the known MPN, interface, package, and temperature information with application guidance, comparison criteria, and PCB-oriented design notes. It helps engineers identify the correct MAX232 family option while making the package, electrical, sourcing, and replacement requirements easier to evaluate in one place.

Аналоги без доработки для MAX232BEASE+T — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MAX232BEASE+T (тот же форм-фактор и посадочное место) — отличается по Package, Supply Voltage, Data Rate, Function, Operating Temperature Range.

Analog Devices
Package: 16-SOIC (NSOIC, narrow body, 0.154" / 3.90 mm width)
Supply Voltage: 4.5 V to 5.5 V
Data Rate: 200 kbps
Сравнить с MAX232BEASE+T →
Analog Devices
Package: 16-pin Narrow SOIC (SOIC-N-16)
Data Rate: 120 kb/s
Function: RS-232 Line Driver/Receiver (Transceiver)
Сравнить с MAX232BEASE+T →
Analog Devices
Supply Voltage: 4.5 V to 5.5 V
Сравнить с MAX232BEASE+T →

MAX232ACSE+T

✅ Прямая замена
Analog Devices
📦 16-SOIC
RS-232 Transceiver (2 Driver / 2 Receiver) · 200 kbps · 4.5 V to 5.5 V · 2 · 2 · Full · ±30 V (HBM ESD tolerance on RS-232 inputs) · 0 °C to +70 °C (C grade)

Уточнить цену

Открыть даташит →

MAX232ECSE

✅ Прямая замена
📦 16-SOIC
Same 16-SOIC family footprint; the verified MAX232BEASE+T temperature rating is 165°C from -40°C to +125°C, while the MAX232ECSE rating requires datasheet confirmation.

📋 Справочный аналог (нет в каталоге)

MAX232EESE+T

✅ Прямая замена ⚠️ Характеристики не проверены
Analog Devices
📦 16-SOIC
RS-232 transceiver · 2 · 2 · Full duplex · Up to 120 kbps · +5 V · ±15 kV human body model · EIA/TIA-232E and CCITT V.28

Уточнить цену

Открыть даташит →

MAX232CSE+T

✅ Прямая замена ⚠️ Характеристики не проверены
Analog Devices
📦 16-SOIC
RS-232 Line Driver/Receiver (Transceiver) · 2 · 2 · RS-232 (EIA/TIA-232E, V.28/V.24) · 4.5 V to 5.5 V (single +5V supply) · 120 kb/s · ±7.5 V minimum (typical ±9 V) into 3 kΩ load · ±30 V

Уточнить цену

Открыть даташит →

MAX232ESE+T

✅ Прямая замена ⚠️ Характеристики не проверены
Analog Devices
📦 16-SOIC
RS-232 transceiver interface IC · 2 drivers and 2 receivers · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E and CCITT V.28 · V.28 and V.24 · On-chip capacitive voltage generator · 16 pins

Уточнить цену

Открыть даташит →

MAX232BEASE+T Характеристики

Product Type RS-232 transceiver
Transmit Channels 2
Receive Channels 2
Interface Configuration 2/2 full-duplex RS-232
Напряжение питания +5 V
Диапазон рабочих температур -40°C to +125°C
Корпус 16-pin SOIC
Тип монтажа Surface mount
Manufacturer Analog Devices / Maxim Integrated

Руководство по цоколевке MAX232BEASE+T в корпусе 16-pin soic

Цоколевка для MAX232BEASE+T (корпус 16-pin soic). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 16-pin soic для MAX232BEASE+T

Нет подробных данных о распиновке для MAX232BEASE+T.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MAX232BEASE+T подходит для 6 применениеs: Industrial Serial Console, Test and Measurement Equipment, Embedded Control Systems, Data Acquisition Systems, Legacy Peripheral Connectivity, Instrumentation and Diagnostics.

🏭

Industrial Serial Console

The MAX232BEASE+T fits industrial serial-console designs that require a +5 V interface across -40°C to +125°C. Its two transmitters and two receivers allow a controller UART to connect to an RS-232 port while leaving additional channels for status, acknowledgment, or diagnostic signaling. Place the transceiver close to the connector, route its ground with the signal return path, and use the manufacturer-specified charge-pump capacitors to maintain reliable operation. The extended-temperature rating is particularly useful in equipment whose enclosure may be exposed to temperature variation. Final EMC and ESD performance still depends on the complete board, cable, connector, and enclosure implementation.

🔧

Test and Measurement Equipment

The MAX232BEASE+T is suitable for test and measurement instruments that exchange commands and results through an RS-232 service port. Its +5 V operation is compatible with conventional controller logic, while the 2/2 full-duplex configuration provides separate paths for command transmission and response reception. Keep the interface path short and away from high-current switching nodes to reduce noise coupling. The verified -40°C to +125°C operating range supports chamber, bench, and industrial test environments. Because RS-232 is an unbalanced interface, engineers should also evaluate ground references, cable length, protection components, and connector shield strategy according to the finished instrument's test requirements.

🧩

Embedded Control Systems

The MAX232BEASE+T can connect an embedded controller's UART to an external RS-232 device when the system uses a +5 V interface and needs extended-temperature coverage. The two transmitters and two receivers are useful for systems carrying data, control commands, and status information over separate lines. Place the IC and its charge-pump capacitors close to the board's RS-232 connector, and route the UART traces away from motors, relays, and switching regulators. The MAX232BEASE+T's -40°C to +125°C range is advantageous in embedded controllers installed in machinery, vehicle-like environments, or outdoor equipment. Check the connected device's logic levels, handshake requirements, and electrical protection before finalizing the interface.

📊

Data Acquisition Systems

The MAX232BEASE+T supports legacy data-acquisition equipment that uses a +5 V RS-232 connection for configuration commands and measurement results. Two transmitters and two receivers provide enough channels for a bidirectional control link or additional acknowledgment paths without duplicating the interface circuitry. Its 16-SOIC package permits compact implementation on control and interface boards. Route the RS-232 traces as a controlled interface path, maintain a continuous ground reference, and apply connector protection appropriate to the installation environment. The -40°C to +125°C operating specification supports industrial equipment, but the complete acquisition system must still meet its own calibration, isolation, noise, and safety requirements.

🖥️

Legacy Peripheral Connectivity

The MAX232BEASE+T is appropriate for connecting a modern controller to legacy peripherals that expose RS-232 rather than modern differential or USB interfaces. Its +5 V supply supports direct integration with common embedded logic, and the 2/2 full-duplex arrangement can accommodate data exchange plus auxiliary control signals. The 16-SOIC footprint keeps the interface compact and compatible with standard surface-mount assembly. Engineers should verify the peripheral's RS-232 voltage levels, connector pinout, flow-control method, and ground relationship before installation. Use the manufacturer pin-description table for PCB implementation and verify charge-pump capacitor values before production release.

📡

Instrumentation and Diagnostics

The MAX232BEASE+T can serve as the RS-232 interface in instrumentation and diagnostic equipment that must operate from +5 V and cover a broad temperature range. The two transmitters and two receivers allow a controller to send commands, retrieve data, and manage diagnostic channels through one compact interface package. Place the device near the external connector to minimize exposed trace length, and keep its supply and charge-pump routing compact. Its -40°C to +125°C specification is advantageous in laboratory and industrial environments with variable thermal conditions. The final enclosure and cable design must still address electrostatic discharge, radiated emissions, and ESD protection requirements appropriate to the equipment class.

Сводка рекомендуемых товаров

MAX232EESE+T MAX232-family RS-232 interface alternative Используется в: Industrial Serial Console, Data Acquisition Systems MAX232ECSE MAX232-family RS-232 interface alternative Используется в: Industrial Serial Console, Data Acquisition Systems, Instrumentation and Diagnostics MAX232ACSE+T Analog Devices Используется в: Test and Measurement Equipment, Embedded Control Systems, Instrumentation and Diagnostics MAX232CSE+T Analog Devices Используется в: Test and Measurement Equipment, Legacy Peripheral Connectivity MAX232ESE+T Analog Devices Используется в: Embedded Control Systems, Legacy Peripheral Connectivity
What is the MAX232BEASE+T?
The MAX232BEASE+T is a +5 V-powered RS-232 transceiver with two transmit channels and two receive channels in a 16-pin SOIC package. According to the MAX232 manufacturer datasheet, it is intended for converting logic-level UART signals to and from RS-232 interface levels. The part is specified from -40°C to +125°C, making it appropriate for extended-temperature industrial and embedded applications.
What are the key specifications of MAX232BEASE+T that engineers should know?
The principal MAX232BEASE+T specifications are +5 V operation, a 2/2 full-duplex RS-232 configuration, two transmitters, two receivers, a 16-pin SOIC package, and an operating-temperature range of -40°C to +125°C. The manufacturer datasheet also defines the required charge-pump capacitors, electrical levels, and pin configuration. Use those datasheet limits when planning the UART connection, power rail, PCB, and external connector.
Where can I download the MAX232BEASE+T datasheet PDF?
The MAX232BEASE+T datasheet PDF is available through the Analog Devices MAX232 product documentation. The document contains the authoritative pin-description table, electrical characteristics, operating limits, typical application circuit, and recommended external-capacitor values. Use the manufacturer document for final schematic and layout decisions, and use the MAX232BEASE+T ordering code to confirm that the selected temperature grade and package match the design.
Where can I find the MAX232BEASE+T pinout?
The MAX232BEASE+T pinout is shown in the MAX232 manufacturer datasheet under the pin-description and package diagrams. The device uses a 16-pin SOIC package with the transmitter, receiver, charge-pump, power, and ground connections identified by pin number. Follow the pin-1 orientation shown in the package drawing when laying out the PCB, especially because incorrect B-direction or charge-pump placement can prevent reliable operation.
Is MAX232BEASE+T suitable for industrial equipment?
The MAX232BEASE+T is suitable for industrial equipment requiring an extended-temperature RS-232 interface because its specified operating range is -40°C to +125°C. Its +5 V supply and 2/2 full-duplex configuration fit legacy serial-control and data-acquisition systems. The temperature rating does not by itself qualify the complete assembly for every industrial standard; enclosure temperature, surge requirements, isolation, and EMC performance still require system-level evaluation.
What is the difference between MAX232BEASE+T and MAX232ACSE+T?
Both devices are 16-pin SOIC RS-232 transceivers in the same MAX232 family, but their temperature grades differ. The MAX232BEASE+T is specified for -40°C to +125°C, while the exact MAX232ACSE+T temperature range must be confirmed in its manufacturer datasheet. Confirm the complete ordering code and temperature grade before substitution; a PCB footprint match alone does not establish equivalent environmental performance.
What is the difference between MAX232BEASE+T and MAX232ECSE?
The MAX232BEASE+T is a +5 V, 2-transmitter and 2-receiver RS-232 transceiver in a 16-pin SOIC package. The MAX232ECSE appears in the family cross-reference results, but its complete electrical ratings and temperature limits must be checked against the manufacturer datasheet before substitution. Verify supply voltage, pinout, capacitance values, temperature grade, and transceiver direction for every channel rather than relying only on the shared package name.
When should I choose MAX232BEASE+T over another MAX232 family member?
Choose the MAX232BEASE+T when the design needs a +5 V, 2/2 full-duplex RS-232 interface in a 16-pin SOIC package and requires operation across -40°C to +125°C. Select another family member when its specified temperature grade, supply requirements, channel count, or electrical limits better match the product. The device is especially useful when a UART needs an extended-temperature point-to-point RS-232 connection.
Is MAX232BEASE+T suitable for a UART to DB9 interface?
The MAX232BEASE+T can interface a UART to an RS-232 DB9 connection when the board supplies +5 V, the required charge-pump capacitors, and correct signal and ground connections. Its two transmitters and two receivers provide more channel flexibility than a one-transmitter, one-receiver device. Final connector pin assignments, signal polarity, grounding, shielding, and ESD protection must be checked against the equipment's RS-232 interface specification.
What can replace the MAX232BEASE+T?
The closest drop-in replacement is a MAX232-family device with the same 16-pin SOIC footprint, +5 V supply, 2/2 RS-232 channel arrangement, compatible pinout, and acceptable temperature grade. MAX232ACSE+T and MAX232ECSE are family candidates identified in cross-reference results, while additional MAX232 suffix variants require manufacturer-document verification. Do not select a replacement from package appearance alone; confirm every pin, capacitor value, and operating rating.
Is MAX232BEASE+T the same as MAX232ACSE+T?
No, the MAX232BEASE+T and MAX232ACSE+T are related 16-pin SOIC RS-232 transceivers but not necessarily identical in temperature grade. The MAX232BEASE+T is explicitly rated for -40°C to +125°C, whereas the MAX232ACSE+T rating must be verified in its own datasheet. They may share the physical footprint, but procurement and design approval require matching the exact ordering code and environmental requirements.
Where can I buy MAX232BEASE+T online?
Use the Request a Quote form on this page to ask about MAX232BEASE+T availability, current commercial terms, and the quantity required for your build. The form provides a direct purchasing path without requiring a static price commitment. Before submitting a request, note the required MPN, package, temperature grade, and target quantity so the supplier can confirm the exact configuration.
What is the price of MAX232BEASE+T?
Current MAX232BEASE+T commercial pricing is handled through the Request a Quote form on this page. The form allows buyers to request pricing for their required quantity and packaging configuration without relying on an outdated static figure. Submit the exact MPN MAX232BEASE+T and specify whether the required quantity is for prototype, production, or scheduled delivery.
What is the lead time for MAX232BEASE+T?
Request the current MAX232BEASE+T lead time through the Request a Quote form on this page. Lead time can depend on order quantity, package configuration, and current manufacturer-channel availability, so it should be confirmed for the planned production schedule. Provide the required annual usage and forecast horizon if a scheduled allocation is important to the sourcing review.
Is MAX232BEASE+T in stock?
Check current MAX232BEASE+T inventory and allocation through the Request a Quote form on this page. Stock status changes with procurement activity, so a purchasing team should request confirmation for the exact quantity and date needed. The part number MAX232BEASE+T identifies the 16-pin SOIC version with tape-and-reel order handling; confirm the delivery plan when submitting the request.
How should MAX232BEASE+T be laid out on a PCB?
Place the MAX232BEASE+T close to the RS-232 connector and route the UART and charge-pump connections according to the manufacturer application guidance. Keep the external charge-pump capacitors short, preserve the pin-1 orientation, and connect the interface ground appropriately. Confirm capacitor values, supply decoupling, and connector protection in the MAX232 datasheet before releasing the PCB layout.

Справочные инженерные данные для MAX232BEASE+T — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the MAX232BEASE+T when the design uses a +5 V RS-232 interface, needs two transmit and two receive channels, and must operate from -40°C to +125°C. Its 16-SOIC package and 2/2 full-duplex configuration fit compact industrial, test, and embedded designs. Consider the MAX232ACSE+T only when its -40°C to +85°C range covers the product environment and PCB requirements are otherwise identical. MAX232ECSE, MAX232EESE+T, MAX232CSE+T, and MAX232ESE+T are same-family candidates whose exact temperature grades, electrical limits, and lifecycle states must be checked before approval. No alternative should be selected from package appearance alone. For any substitution, verify the pinout, charge-pump capacitors, supply range, channel directions, shutdown behavior, and required production quantity.

Сравнение с аналогами

Параметр Этот товар MAX232ACSE+T MAX232ECSE MAX232EESE+T MAX232CSE+T MAX232ESE+T
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Interface Type RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

Ключевые отличия

  • Higher verified upper operating-temperature limit (против MAX232ACSE+T)
  • Extended-temperature option in the same 16-SOIC footprint (против MAX232CSE+T)
  • Two transmitters and two receivers in one package (против MAX232ESE+T)

Заметки по проектированию

Place the MAX232BEASE+T and its required charge-pump capacitors close to the RS-232 connector. Keep capacitor loops compact, provide a direct ground return, and route the RS-232 traces away from switching nodes and high-current power paths. Use the manufacturer pin-description table to preserve pin-1 orientation and verify every net before fabrication.

The MAX232BEASE+T is specified for +5 V operation. Decouple the supply near the device with the capacitance and placement required by the manufacturer application guidance, and ensure the source can support the charge-pump and output-current demand. Confirm the permitted supply tolerance and capacitor values in the MAX232 datasheet rather than copying them from a different MAX232 suffix.

Do not treat a matching 16-SOIC footprint as sufficient proof of drop-in equivalence. Confirm the channel directions, pinout, supply range, charge-pump capacitor arrangement, temperature grade, and enable or shutdown behavior for every proposed replacement. A suffix change can alter environmental ratings even when the physical footprint remains unchanged.

RS-232 is an unbalanced interface, so ground offsets and cable coupling can affect communication reliability. Maintain a continuous signal-return path, keep the interface connector and transceiver placement controlled, and apply appropriate connector-side transient protection. Evaluate the finished board for radiated emissions and immunity because component placement alone cannot guarantee system compliance.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance attributes require confirmation in the current Analog Devices product documentation or declaration of conformity.

Данные проверены: 2026-11-09 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MAX232BEASE+T datasheet MAX232BEASE+T pinout MAX232BEASE+T datasheet pdf MAX232BEASE+T equivalent MAX232BEASE+T replacement MAX232BEASE+T cross reference MAX232BEASE+T vs MAX232ACSE+T MAX232BEASE+T 16-SOIC Analog Devices MAX232BEASE+T MAX232BEASE+T price MAX232BEASE+T stock MAX232BEASE+T industrial RS-232

Связанные компоненты & термины

Analog Devices MAX232 MAX232BEASE+T MAX232ACSE+T MAX232ECSE MAX232EESE+T MAX232CSE+T MAX232ESE+T RS-232 transceiver RS-232 interface interface IC communications IC semiconductor UART full-duplex 2/2 transceiver 16-SOIC SOIC family surface mount SMD +5 V power charge-pump capacitor industrial automation test and measurement
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ