Texas Instruments

MAX232ECDWR - Dual 250kbps RS-232 Transceiver | Texas Instruments

Артикул: MAX232ECDWR ✓ Активен
4.5 V to 5.5 V Vdss 16-pin SOIC (DW), 0.295 inch / 7.50 mm width Package
MOQ: 1 |

MAX232ECDWR Обзор

The Texas Instruments MAX232ECDWR is a dual RS-232 line driver and receiver with IEC 61000-4-2 electrostatic-discharge protection. It supports a 4.5V to 5.5V supply, operates at up to 250kbps, and is packaged in a 16-pin SOIC. The device includes on-chip charge-pump circuitry for generating the bipolar RS-232 voltage levels required by the transmitters.

An RS-232 transceiver is an interface IC that converts between single-ended TTL and CMOS logic levels and the differential, bipolar signaling used by RS-232 equipment. Its transmitters provide level shifting and signal conditioning for outgoing data, while its receivers translate incoming RS-232 signals into logic-compatible levels. The MAX232ECDWR combines two transmitters and two receivers in one package, making it suitable for two-way serial links in industrial control, instrumentation, data acquisition, and legacy peripheral equipment.

Key electrical characteristics include operation from a 4.5V to 5.5V single supply and a maximum signaling rate of 250kbps. IEC 61000-4-2 protection is a distinguishing feature for cables and connectors that may be exposed to electrostatic discharge. The 16-pin SOIC package follows the familiar MAX232E pin arrangement, including dedicated charge-pump capacitor pins and a bypass-capacitor connection. These external capacitors must be selected according to the manufacturer datasheet rather than substituted with arbitrary values.

The MAX232E architecture uses a capacitive voltage generator to produce the positive and negative voltage levels required for RS-232 transmission. Because this charge-pump architecture needs external capacitors, board layout should keep the charge-pump network compact and place bypass capacitance close to the supply pins. The receiver side converts bipolar RS-232 input levels to CMOS logic levels, allowing the device to interface directly with a host UART or other digital controller.

Typical applications include RS-232 ports on industrial test equipment, programmable logic controllers, serial adapters, point-of-sale terminals, laboratory instruments, and embedded control boards. The 250kbps rate is suitable for legacy serial peripherals, configuration links, and short-distance point-to-point communication. The integrated ESD protection is particularly useful where an exposed DB9 or equivalent connector connects the transceiver to external cables.

When designing the board, verify the required charge-pump and bypass capacitor values in the manufacturer datasheet and confirm that the 4.5V to 5.5V supply remains within tolerance during transients. Keep protected connector-side routing separated from sensitive logic-side traces, and provide a controlled ground reference between communicating systems to avoid unintended signal offsets.

This page combines the exact MAX232ECDWR ordering information, electrical characteristics, cross-reference findings, PCB implementation guidance, and application-specific engineering guidance for engineers evaluating the SOIC-16 transceiver for RS-232 interfaces.

Аналоги без доработки для MAX232ECDWR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MAX232ECDWR (тот же форм-фактор и посадочное место) — отличается по Package, Product Type, Maximum Data Rate, Supply Voltage, Interface Standard.

Analog Devices
Package: 16-lead SOIC (SOIC-16)
Supply Voltage: 5 V (single supply)
Сравнить с MAX232ECDWR →
Analog Devices
Package: 16-pin SOIC
Product Type: RS-232 line-driver and receiver transceiver
Maximum Data Rate: 120 kbps
Сравнить с MAX232ECDWR →
Texas Instruments
Package: 16-SOIC, 7.50 mm width
Product Type: Dual RS-232 driver and receiver transceiver
Interface Standard: TIA/EIA-232-F
Сравнить с MAX232ECDWR →
Texas Instruments
Supply Voltage: 5 V
Сравнить с MAX232ECDWR →
Analog Devices
Package: 16-pin wide SOIC
Product Type: Dual RS-232 driver/receiver transceiver
Maximum Data Rate: 120 kbps
Сравнить с MAX232ECDWR →
Texas Instruments
Package: 16-pin SOIC
Product Type: Dual RS-232 line driver and receiver
Maximum Data Rate: 120 kbit/s
Сравнить с MAX232ECDWR →
Texas Instruments
Package: 16-pin SOIC
Product Type: Dual RS-232 line driver and receiver
Interface Standard: RS-232
Сравнить с MAX232ECDWR →
Texas Instruments
Package: 16-SOIC (0.154 inch, 3.90 mm width)
Product Type: Dual RS-232 line driver/receiver transceiver
Interface Standard: RS-232
Сравнить с MAX232ECDWR →

MAX232EIDWR

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 16-pin SOIC (DW)
Dual RS-232 driver/receiver · 2 channels · 2 channels · 250 kbps · 5 V · ±9 V · ±30 V · 1.3 V

Уточнить цену

Открыть даташит →

MAX3232EIDR

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 16-pin SOIC (IDR)
Dual RS-232 line driver/receiver transceiver · 2 drivers · 2 receivers · 250 kbps · 3 V to 5.5 V · 3.3 V · RS-232 · ±15 kV

Уточнить цену

Открыть даташит →

MAX232EIDR

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 16-pin SOIC (IDR)
Dual RS-232 line driver and receiver · 2 · 2 · 5 V · 120 kbit/s · ±9 V · ±30 V · 1.0 µF

Уточнить цену

Открыть даташит →

TRS232EIDWR

✅ Прямая замена
📦 16-pin SOIC (DW)
Second-source dual RS-232 transceiver in the same 16-pin SOIC footprint; recommended charge-pump and bypass capacitor values may differ from those used with the MAX232E

📋 Справочный аналог (нет в каталоге)

MAX3232ECDR

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 16-pin SOIC (CDR)
Dual RS-232 line driver and receiver · 2 channels · 3 V to 5.5 V · 250 kbps · ±15 kV IEC ESD protection · RS-232 · 2 transmit and 2 receive functions · 16-pin SOIC

Уточнить цену

Открыть даташит →

MAX232ECDWR Характеристики

Product Type Dual RS-232 driver/receiver
Number of Transmitters 2
Number of Receivers 2
Maximum Data Rate 250 kbps
Supply Voltage Range 4.5 V to 5.5 V
Supply Type Single 5 V supply
ESD Protection Standard IEC 61000-4-2
Корпус 16-pin SOIC (DW), 0.295 inch / 7.50 mm width
Тип монтажа Surface mount
Transmitter Output Type RS-232 line driver
Receiver Output Type TTL/CMOS logic-level receiver
Charge-Pump Architecture Capacitive voltage generator with external capacitors
Number of External Charge-Pump Capacitors 4
Bypass Capacitor Connection 1 external capacitor pin

Конфигурация выводов MAX232ECDWR

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Контакт 1 V+ — Positive charge-pump output
Контакт 2 R1OUT — Receiver 1 output
Контакт 3 R2OUT — Receiver 2 output
Контакт 4 R2IN — Receiver 2 input
Контакт 5 R1IN — Receiver 1 input
Контакт 6 GND — Ground
Контакт 7 V- — Negative charge-pump output
Контакт 8 T2IN — Transmitter 2 input
Контакт 9 T2OUT — Transmitter 2 output
Контакт 10 T1IN — Transmitter 1 input
Контакт 11 T1OUT — Transmitter 1 output
Контакт 12 VCC — Positive supply
Контакт 13 V+ — Positive charge-pump output
Контакт 14 C3 — Charge-pump capacitor connection
Контакт 15 C2 — Charge-pump capacitor connection
Контакт 16 C1 — Charge-pump and bypass capacitor connection

Типичное применение

MAX232ECDWR подходит для 6 применениеs: Industrial Test and Measurement Equipment, Programmable Logic Controller Serial Ports, Embedded UART and USB-to-Serial Adapters, Point-of-Sale and Service Terminal Interfaces, Laboratory Data Acquisition Systems, Legacy Peripheral and Printer Connectivity.

🏭

Industrial Test and Measurement Equipment

The MAX232ECDWR fits legacy RS-232 control and data ports on oscilloscopes, programmable power supplies, and laboratory instruments. Its two transmitters and two receivers support full-duplex communication at rates up to 250kbps, while the 4.5V to 5.5V supply range matches common 5V instrument-control logic. IEC 61000-4-2 protection is especially valuable when users connect a DB9 cable directly to the instrument. Place the charge-pump capacitors close to their pins and route connector-side traces away from sensitive measurement circuitry.

🏭

Programmable Logic Controller Serial Ports

The MAX232ECDWR provides the physical layer for a two-wire RS-232 service port on a programmable logic controller or industrial controller. The 250kbps maximum rate supports parameter downloads, diagnostic messages, and configuration transfers to legacy peripherals. Two drivers and two receivers allow independent command and telemetry paths within one 16-pin SOIC. The integrated IEC 61000-4-2 protection improves robustness at an externally accessible connector, although chassis grounding and enclosure design remain essential for industrial surge and ESD control.

🔧

Embedded UART and USB-to-Serial Adapters

The MAX232ECDWR is useful in embedded boards that expose an RS-232 connector to a host UART, modem, or service interface. It translates 5V logic signals into RS-232 levels and returns received data as CMOS-compatible logic, avoiding a separate line-driver circuit. Its 250kbps rate suits configuration and diagnostic traffic rather than high-bandwidth data transfer. Keep the external charge-pump network compact, provide local supply bypassing, and place protection or filtering components close to the connector entry point.

💳

Point-of-Sale and Service Terminal Interfaces

The MAX232ECDWR can support a legacy RS-232 connection between a point-of-sale terminal, printer, scanner, or service console and a controller board. Its dual-driver, dual-receiver configuration supports both outbound commands and inbound status or receipt data at rates up to 250kbps. ESD protection is beneficial in retail equipment where the serial port may be connected during installation or servicing. The 16-pin SOIC footprint keeps the interface compact, while the datasheet-specified capacitor values should be used unchanged to maintain reliable charge-pump operation.

📊

Laboratory Data Acquisition Systems

The MAX232ECDWR suits laboratory data-acquisition systems that retain a serial console for configuration, calibration, and diagnostics. At 250kbps, the link is appropriate for command traffic and periodic status transfer rather than continuous high-rate sample streaming. The receiver converts incoming RS-232 levels to logic signals for the controller, and the transmitters return acknowledgements or control data. IEC 61000-4-2 protection adds value for bench equipment where the serial connector is accessible to operators and connected cables may be handled frequently.

🖨️

Legacy Peripheral and Printer Connectivity

The MAX232ECDWR enables a modern controller to communicate with legacy RS-232 printers, scales, scanners, and service interfaces that have no USB or network port. The 250kbps limit comfortably covers typical printer-control and receipt-transfer traffic while the 4.5V to 5.5V operating range integrates directly with 5V digital systems. Two channels can handle independent data and flow-control signals when required. Maintain a defined signal-ground reference between connected systems and avoid long unprotected stubs away from the connector-side protection circuitry.

What is the MAX232ECDWR used for?
The MAX232ECDWR provides two RS-232 transmitters and two receivers in a 16-pin SOIC package. According to the Texas Instruments MAX232E documentation, it converts between 5V TTL or CMOS logic levels and RS-232 signal levels, supports rates up to 250kbps, and includes IEC 61000-4-2 electrostatic-discharge protection. It is intended for legacy serial ports, test equipment, industrial controllers, and embedded systems that require a two-way RS-232 interface.
What is the operating voltage of MAX232ECDWR?
The MAX232ECDWR operates from a 4.5V to 5.5V single supply. The manufacturer part information identifies this 5V interface range, which is compatible with 5V TTL and CMOS systems. The device uses an internal charge-pump arrangement to develop the positive and negative voltage levels required for RS-232 transmission. Keep the supply inside this range and provide the external capacitors specified in the manufacturer datasheet near the associated pins.
Where can I download the MAX232ECDWR datasheet PDF?
The MAX232ECDWR datasheet is available through the Texas Instruments MAX232E family documentation and the linked 18-page PDF copy from AllDataSheet. The document describes the dual driver/receiver, IEC 61000-4-2 protection, electrical characteristics, pin configuration, and recommended charge-pump capacitors. Use the manufacturer documentation when selecting bypass and charge-pump values because substitution of capacitor values can affect startup, voltage generation, and interface performance.
Where can I find the MAX232ECDWR pinout?
The MAX232ECDWR uses a 16-pin SOIC arrangement with numbered charge-pump, bypass, supply, receiver, and transmitter connections. The pin-description table and package drawing in the manufacturer datasheet are the authoritative references for PCB layout and net assignment. Because pin 1 orientation follows the standard counter-clockwise SOIC convention, verify the package dot and silkscreen marking before assigning signals or placing the device.
What is the maximum data rate of MAX232ECDWR?
The MAX232ECDWR supports a maximum data rate of 250kbps. This rate is appropriate for conventional RS-232 communication links, including configuration ports, instrument-control interfaces, and legacy peripherals. It should not be treated as a substitute for a high-speed RS-485 transceiver, because RS-485 uses a different physical-layer signaling method and normally supports longer buses and multidrop configurations. Confirm that the UART and cabling can operate at the selected rate.
What is the best drop-in replacement for MAX232ECDWR?
The TRS232EIDWR is the closest identified second-source option for the MAX232ECDWR because it uses the same 16-pin SOIC interface and provides the same dual-driver, dual-receiver RS-232 function. TI notes that surrounding capacitor values should be checked before substitution because charge-pump component recommendations can differ. Verify pin compatibility, capacitor values, supply limits, and timing against the relevant datasheet before approving a cross-brand replacement.
Can the TRS232EIDWR replace the MAX232ECDWR?
The TRS232EIDWR can serve as a drop-in replacement candidate for the MAX232ECDWR because it is offered in the corresponding 16-pin SOIC configuration and provides equivalent RS-232 transceiver functions. Texas Instruments support guidance specifically discusses substituting the TRS232EIDWR while retaining the MAX232E charge-pump capacitors. The surrounding C1 through C4 and bypass capacitor values should still be confirmed against the TRS232E data sheet before production use.
When should I choose MAX232ECDWR over the TRS232EIDWR?
Choose the MAX232ECDWR when the design is already qualified around the Texas Instruments MAX232E footprint, component layout, and charge-pump network. It is a practical option for maintaining a consistent bill of materials in industrial, instrumentation, or embedded systems that require the documented IEC 61000-4-2 protection. Select the TRS232EIDWR when a qualified second source is more valuable than keeping one manufacturer across the transceiver family.
MAX232ECDWR vs TRS232EIDWR - which is better for an industrial control board?
The MAX232ECDWR is preferable when existing board validation and the surrounding charge-pump capacitors are already based on the MAX232E design. The TRS232EIDWR is attractive for dual sourcing because its 16-pin SOIC configuration and dual RS-232 functions align with the MAX232ECDWR. For an industrial control board, compare ESD ratings, supply range, timing, temperature grade, capacitor recommendations, and approved lifecycle status rather than selecting only by package name.
What is the difference between MAX232ECDWR and MAX232EIDWR?
Both devices use the MAX232E family architecture for two RS-232 drivers and two receivers, but their ordering suffixes identify different configuration or packaging options. The MAX232ECDWR is specified as a 16-pin SOIC part with IEC 61000-4-2 protection. Before substituting MAX232EIDWR, compare the exact ordering table, temperature grade, exposed-pin or package details, and device-status information to ensure the chosen suffix matches the intended PCB and production requirements.
How should the MAX232ECDWR charge-pump capacitors be placed?
Place the MAX232E charge-pump capacitors close to their dedicated IC pins and keep the associated traces short to limit switching noise and distributed inductance. Connect the bypass capacitor directly to the supply and ground pins with a minimal return path. The capacitor values must follow the manufacturer datasheet because the charge pump must generate stable bipolar voltage levels for reliable RS-232 transmission. High-current charge-pump loops should remain compact and separated from sensitive analog inputs.
Does the MAX232ECDWR need external charge-pump capacitors?
Yes. The MAX232ECDWR uses the MAX232E capacitive voltage-generator architecture, so external capacitors are required for charge-pump operation, and a bypass capacitor supports the local supply connection. Use the manufacturer datasheet for the exact recommended values and tolerances. The MAX232ECDWR is not a regulator with an entirely internal charge-pump supply, and omitting the capacitors can prevent correct RS-232 voltage generation or degrade transmission behavior.
How much ESD protection does the MAX232ECDWR provide?
The MAX232ECDWR is identified as a dual RS-232 driver/receiver with IEC 61000-4-2 protection. This is the key advantage over a basic MAX232E configuration when a board exposes its RS-232 connector to user-accessible cables. IEC 61000-4-2 is a system-level electrostatic-discharge test criterion, so board designers should still maintain proper connector grounding, controlled cable routing, and an effective enclosure and chassis strategy.
Where can I buy MAX232ECDWR online?
Use the Request a Quote form on this page to request MAX232ECDWR pricing, current inventory, minimum order quantity, and lead time for the exact 16-pin SOIC ordering code. The part is listed for quotation by Texas Instruments and appears across authorized-distribution listings, but availability and commercial terms can change. Specify the required quantity, target date, and ship-to region when submitting the request to obtain an actionable quotation.
What is the lead time for MAX232ECDWR?
The current lead time for MAX232ECDWR should be confirmed through the Request a Quote form on this page rather than from an archived listing. Lead time depends on the requested quantity, current factory and distributor inventory, and the manufacturing schedule. One distributor listing indicates that units were shown as available for immediate shipment at the time of retrieval, but the Request a Quote form provides the current allocation for your quantity and delivery requirements.
What are the key specifications of MAX232ECDWR that engineers should know?
The key MAX232ECDWR specifications are two RS-232 drivers, two receivers, a 4.5V to 5.5V operating supply, a maximum data rate of 250kbps, and IEC 61000-4-2 electrostatic-discharge protection. The device uses a 16-pin SOIC package and an external-capacitor charge-pump arrangement. These characteristics place it between basic MAX232 transceivers and higher-speed or more specialized RS-232 interface families.

Справочные инженерные данные для MAX232ECDWR — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the MAX232ECDWR when the design requires a 4.5V to 5.5V dual RS-232 interface operating at up to 250kbps, especially when an externally accessible connector needs IEC 61000-4-2 protection. Its 16-pin SOIC footprint and established MAX232E charge-pump architecture make it a natural choice for industrial instruments, controllers, and legacy peripheral boards. Select the TRS232EIDWR when dual sourcing is the priority, but verify its recommended charge-pump and bypass capacitor values before substitution. Consider the MAX3232EIDR or MAX3232ECDR for links that benefit from a higher-speed MAX3232E architecture, while checking their lower-voltage operation and other electrical changes. For a fixed MAX232E design already validated with specific external capacitors, retaining the MAX232ECDWR generally minimizes requalification work.

Сравнение с аналогами

Параметр Этот товар MAX232EIDWR MAX3232EIDR MAX232EIDR TRS232EIDWR MAX3232ECDR
Package 16-pin SOIC (DW) 16-pin SOIC (DW) 16-pin SOIC (IDR) 16-pin SOIC (IDR) 16-pin SOIC (DW) 16-pin SOIC (CDR)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Transmitters 2 2 2 2 2 2
Receivers 2 2 2 2 2 2
Charge-Pump Architecture Capacitive voltage generator with external capacitors Capacitive voltage generator Capacitive voltage generator Capacitive voltage generator Capacitive voltage generator Capacitive voltage generator
Interface Standard RS-232 RS-232 RS-232 RS-232 RS-232 RS-232

Ключевые отличия

  • Integrated ESD protection for externally accessible serial connectors (против TRS232EIDWR)
  • Complete dual-channel interface in a standard 16-pin SOIC (против MAX232EIDR)
  • Purpose-built 250kbps legacy RS-232 performance (против MAX3232EIDR)

Заметки по проектированию

Place the four external charge-pump capacitors and the supply bypass capacitor as close as practical to their associated MAX232ECDWR pins. Keep the C1, C2, and C3 loop compact and provide a direct ground return to the IC. Long capacitor leads add inductance to the switching charge-pump loop and can increase ringing or supply noise, which may appear on transmitted signals.

Separate connector-side RS-232 nets from sensitive logic or analog traces. The transmitter outputs experience large bipolar swings, so avoid routing them beneath clocks, reference-voltage nets, or precision measurement inputs. Maintain a controlled ground reference between communicating systems and use the board's established chassis or signal-ground strategy to prevent an unintended ground potential difference from shifting receiver thresholds.

Do not substitute arbitrary charge-pump capacitor values when replacing the MAX232ECDWR with the TRS232EIDWR or another MAX232-family device. TI support guidance specifically notes that C1 through C4 and the bypass capacitor should be checked against the alternative device's recommendations. Also confirm the 4.5V to 5.5V supply requirement and the selected suffix's temperature and protection configuration before releasing a substitution.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The device is identified as an RS-232 transceiver with IEC 61000-4-2 electrostatic-discharge protection. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the listed part information and are therefore recorded as unknown.

Данные проверены: 2026-11-17 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MAX232ECDWR datasheet MAX232ECDWR pinout MAX232ECDWR datasheet pdf MAX232ECDWR equivalent MAX232ECDWR replacement MAX232ECDWR drop-in replacement MAX232ECDWR cross reference MAX232ECDWR price MAX232ECDWR stock Texas Instruments MAX232ECDWR MAX232ECDWR vs TRS232EIDWR MAX232ECDWR vs MAX3232EIDR MAX232ECDWR SOIC-16 pinout MAX232ECDWR RS-232 application circuit MAX232ECDWR charge pump capacitors

Связанные компоненты & термины

Texas Instruments MAX232ECDWR MAX232E MAX232EIDWR MAX232EIDR TRS232EIDWR MAX3232EIDR MAX3232ECDR RS-232 RS-232 transceiver RS-232 line driver RS-232 receiver TTL logic CMOS logic charge-pump voltage generator IEC 61000-4-2 electrostatic-discharge protection SOIC-16 surface-mount package 250kbps data rate single 5V supply industrial test equipment programmable logic controller legacy serial peripheral
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ