Analog Devices

MAX3232CSE+TG1Z - 1Mbps Dual RS-232 Transceiver | Analog Devices

Артикул: MAX3232CSE+TG1Z ✓ Активен
3.0V to 5.5V Vdss 16-pin SOIC Package
MOQ: 1 |

MAX3232CSE+TG1Z Обзор

The Analog Devices MAX3232CSE+TG1Z is a dual transmitter and dual receiver RS-232 transceiver designed for 3.0V to 5.5V single-supply operation, with data rates up to 1Mbps in a 16-pin SOIC package. The integrated interface translates logic-level UART signals into true RS-232 levels and converts incoming RS-232 signals back to CMOS/TTL-compatible logic levels.

An RS-232 transceiver is a communications interface IC used to connect a modern microcontroller, programmable logic controller, or computer serial port with equipment that uses the RS-232 standard. The MAX3232 belongs to the broader line-driver and receiver hierarchy, combines two RS-232 drivers with two receivers, and eliminates the need for a separate negative supply. Its true RS-232 implementation also supports low-power portable equipment connected to external data and control systems.

The MAX3232CSE+TG1Z operates from a 3.0V to 5.5V supply and supports communication rates up to 1Mbps. It uses four 0.1uF charge-pump capacitors to generate the voltage levels required by true RS-232 transmitters. The manufacturer describes the MAX3232 family as pin, package, and functionally compatible with industry-standard RS-232 interfaces, which simplifies design reuse when the electrical requirements and operating conditions match.

Its dual-channel architecture allows one serial link to carry data in both directions or supports two independent unidirectional links. Logic-side signals connect directly to a UART controller, while the driver outputs and receiver inputs connect to the external RS-232 connector. The 16-pin SOIC package is suitable for conventional surface-mount PCB assembly, although connector protection, grounding, and signal-integrity practices remain necessary in industrial environments.

Typical uses include industrial serial controllers, programmable logic controller communication ports, data-acquisition equipment, point-of-sale terminals, and service interfaces for embedded systems. A dual-driver, dual-receiver arrangement is particularly useful when a board must exchange commands and status data with a single RS-232 port or interface two separate RS-232 links.

Design the circuit around the manufacturer's recommended 0.1uF charge-pump capacitor network and observe polarity and routing requirements shown in the MAX3232 data sheet. Keep sensitive receiver traces away from switching nodes and high-current edges, provide a stable ground reference between the logic board and RS-232 equipment, and consider external transient protection for cables longer than a short bench connection.

This product overview combines interface specifications, pin-level implementation guidance, application patterns, and verified drop-in alternatives to accelerate component selection and PCB design. It also identifies the electrical and qualification checks that must be completed before substituting one RS-232 transceiver for another.

Аналоги без доработки для MAX3232CSE+TG1Z — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MAX3232CSE+TG1Z (тот же форм-фактор и посадочное место) — отличается по Maximum Data Rate, Package, Interface Standard, Supply Voltage Range, Device Type.

Maxim Integrated
Maximum Data Rate: Up to 1Mbps
Package: 16-SOIC narrow
Device Type: Dual RS-232 transceiver
Сравнить с MAX3232CSE+TG1Z →
Analog Devices
Maximum Data Rate: 1 Mbps
Package: 16-pin TSSOP
Supply Voltage Range: 3.0 V to 5.5 V
Сравнить с MAX3232CSE+TG1Z →
Analog Devices
Maximum Data Rate: Up to 1 Mbps
Interface Standard: RS-232
Supply Voltage Range: 3.0 V to 5.5 V
Сравнить с MAX3232CSE+TG1Z →

MAX3232CSE+

✅ Прямая замена
Maxim Integrated
📦 16-pin SOIC
Dual RS-232 transceiver · 2 · 2 · 3.0V to 5.5V · Up to 1Mbps · True RS-232 · RS-232, CMOS · Low-power

Уточнить цену

Открыть даташит →

MAX3232ECUE+T

✅ Прямая замена
Analog Devices
📦 16-pin SOIC
RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · 1 Mbps · True RS-232 · ±15 kV · Low-power operation

Уточнить цену

Открыть даташит →

MAX3232ESE+

✅ Прямая замена
Analog Devices
📦 16-pin SOIC
RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · Up to 1 Mbps · RS-232 · 16-pin SOIC

Уточнить цену

Открыть даташит →

MAX3232CSE+TG1Z Характеристики

Product Type Dual RS-232 transceiver with 2 transmitters and 2 receivers
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 1Mbps
Interface Standard True RS-232
Number of Drivers 2
Number of Receivers 2
Charge-Pump Capacitors 4 x 0.1uF
Корпус 16-pin SOIC
Тип монтажа Surface Mount
Logic-Side Supply Single positive supply
Production Status Production

Конфигурация выводов MAX3232CSE+TG1Z

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Контакт 1 C1+ — Charge-pump capacitor terminal
Контакт 2 V+ — Charge-pump output capacitor terminal
Контакт 3 C1- — Charge-pump capacitor terminal
Контакт 4 C2+ — Charge-pump capacitor terminal
Контакт 5 C2- — Charge-pump capacitor terminal
Контакт 6 V- — Charge-pump output capacitor terminal
Контакт 7 T1OUT — First RS-232 transmitter output
Контакт 8 R1IN — First RS-232 receiver input
Контакт 9 R1OUT — First receiver logic output
Контакт 10 R2IN — Second RS-232 receiver input
Контакт 11 T2IN — Second transmitter logic input
Контакт 12 T2OUT — Second RS-232 transmitter output
Контакт 13 R2OUT — Second receiver logic output
Контакт 14 T1IN — First transmitter logic input
Контакт 15 GND — Ground
Контакт 16 VCC — Positive supply

Типичное применение

MAX3232CSE+TG1Z подходит для 6 применениеs: Industrial PLC Serial Communication, Data Acquisition Equipment, Point-of-Sale Terminal Interface, Embedded Service and Configuration Port, Two-Port RS-232 Interface Expansion, Programmable Logic Controller Communication.

🏭

Industrial PLC Serial Communication

The MAX3232CSE+TG1Z fits a PLC or serial gateway that must communicate with RS-232 equipment over a 3.0V to 5.5V supply. Its two transmitters and two receivers support bidirectional command and status traffic, while the 1Mbps capability allows the interface to exceed the speed of many conventional serial-control links. Four 0.1uF charge-pump capacitors implement the true RS-232 voltage conversion. Place the interface close to the connector, maintain a common ground reference, and add cable-side surge protection when the port connects to external industrial wiring.

📟

Data Acquisition Equipment

The MAX3232CSE+TG1Z is useful in laboratory and industrial data-acquisition equipment that exchanges commands and measurements with a host computer. A single 3.3V or 5V supply powers both the logic system and the RS-232 interface, avoiding a separate negative rail for the transmitters. The dual-driver and dual-receiver arrangement can support one full-duplex port or two independent links. Its maximum data rate of 1Mbps is suitable for command traffic and burst-oriented measurements, while the four required 0.1uF capacitors should be placed according to the reference circuit.

🖥️

Point-of-Sale Terminal Interface

The MAX3232CSE+TG1Z can connect a point-of-sale controller, receipt printer, or service terminal to an RS-232 peripheral. Its true RS-232 levels support legacy equipment without adding a separate negative power rail, and its 3.0V to 5.5V operating range accommodates embedded processors operating at either common logic voltage. The two transmitter and two receiver channels provide flexible command and status routing. Because retail peripherals may use long cables, place protection at the connector and keep the logic-side ground reference close to the transceiver to minimize noise pickup.

🔧

Embedded Service and Configuration Port

The MAX3232CSE+TG1Z provides a compact service port for an embedded controller, programmable logic controller, or field-programmable gate array that requires configuration and diagnostic access. The 16-pin SOIC package preserves PCB area, while the integrated dual charge pump generates true RS-232 levels from one positive supply. Its two transmitters and receivers can handle both console commands and peripheral status. Follow the data-sheet capacitor layout closely, avoid routing the charge-pump nodes beneath sensitive signal paths, and use a series resistor or protection network where exposed cables enter the enclosure.

🌐

Two-Port RS-232 Interface Expansion

The MAX3232CSE+TG1Z can expand one host into two separate RS-232 links because it contains two independent transmitters and two receivers. This arrangement suits instrumentation with one command channel and one status channel, or systems that connect two different peripherals through one interface IC. The device operates from 3.0V to 5.5V and supports rates up to 1Mbps, providing performance above ordinary low-speed RS-232 use. Assign each channel according to the pin-description table, maintain consistent signal grounding, and route each cable-side interface through appropriate transient protection.

⚙️

Programmable Logic Controller Communication

The MAX3232CSE+TG1Z is appropriate for PLC communication modules that connect logic-level controller hardware to RS-232 drives, HMIs, or service equipment. Its 3.0V to 5.5V supply range allows integration with common embedded control platforms, and the 1Mbps maximum data rate supports efficient command exchanges. The dual-channel arrangement can reduce the number of interface components on a control board. Observe the recommended 0.1uF charge-pump capacitor placement, provide continuous ground near the device, and isolate external cable transients from sensitive controller circuitry.

What is the MAX3232CSE+TG1Z?
The MAX3232CSE+TG1Z is a dual RS-232 transceiver containing two transmitters and two receivers in a 16-pin SOIC package. According to the Analog Devices MAX3232 Data Sheet (Rev. 10), it operates from 3.0V to 5.5V, supports data rates up to 1Mbps, and uses a dual charge-pump arrangement to generate true RS-232 voltage levels from one positive supply.
What are the key specifications of MAX3232CSE+TG1Z that engineers should know?
The MAX3232CSE+TG1Z provides two transmitters, two receivers, true RS-232 operation, a 3.0V to 5.5V supply range, and a maximum data rate of 1Mbps. The Analog Devices MAX3232 Data Sheet (Rev. 10) also identifies four 0.1uF charge-pump capacitors as the standard external support components. Its 16-pin SOIC format supports conventional surface-mount assembly while reducing board area compared with larger discrete interface solutions.
Where can I download the MAX3232CSE+TG1Z datasheet PDF?
The official MAX3232CSE+TG1Z documentation is available through the Analog Devices MAX3232 product page, which provides the manufacturer data sheet and supporting design information. The family documentation is titled MAX3232 Data Sheet (Rev. 10). Use that document for the authoritative pin description, recommended charge-pump capacitor values, electrical characteristics, and typical application circuit.
Where can I find the MAX3232CSE+TG1Z pinout?
The MAX3232CSE+TG1Z uses a 16-pin SOIC pin configuration documented in the Analog Devices MAX3232 Data Sheet (Rev. 10). Pins 1 through 6 are assigned to the charge-pump capacitor and supply functions, while pins 7 through 14 provide the two driver outputs, two receiver inputs, two receiver outputs, and two driver inputs. Pins 15 and 16 provide ground and positive supply connections.
Where can I buy MAX3232CSE+TG1Z online?
The MAX3232CSE+TG1Z can be requested through the Request a Quote form on this page. The form allows buyers to specify the required quantity, delivery target, and packaging needs for the exact 16-pin SOIC ordering code. Current channel availability and lead time should be confirmed with the supplier after the request is submitted.
What is the price of MAX3232CSE+TG1Z?
The current price of MAX3232CSE+TG1Z should be obtained through the Request a Quote form on this page. The form permits a quantity-based quotation for the exact MAX3232CSE+TG1Z ordering code, including production quantities and delivery requirements. No static price is used here because market pricing and availability can change with quantity, date, and supply conditions.
What is the lead time for MAX3232CSE+TG1Z?
Use the Request a Quote form on this page to request the current lead time and minimum order quantity for MAX3232CSE+TG1Z. Lead time depends on the ordered quantity, requested delivery date, and current component availability. The Analog Devices product page identifies the MAX3232 family as being in production, while the exact production and delivery schedule should be confirmed for the individual order.
Is MAX3232CSE+TG1Z in stock?
Current inventory for MAX3232CSE+TG1Z should be confirmed through the Request a Quote form on this page. Submit the required quantity and target delivery date so the exact ordering code and packaging requirement can be checked. The manufacturer lists the MAX3232 family as production, but family production status does not by itself guarantee immediate stock for every quantity.
Can MAX3232CSE+TG1Z be used with a 3.3V microcontroller?
Yes, the MAX3232CSE+TG1Z is suitable for a 3.3V UART interface because its specified supply range is 3.0V to 5.5V. The Analog Devices MAX3232 Data Sheet (Rev. 10) also specifies operation up to 1Mbps. Confirm the UART logic levels, receiver thresholds, charge-pump capacitors, and connector protection before using the interface in a new design.
Does MAX3232CSE+TG1Z need a negative power supply?
No, the MAX3232CSE+TG1Z does not require a separate negative supply for true RS-232 operation. Its internal dual charge-pump circuit develops the required positive and negative voltage levels from the 3.0V to 5.5V supply. The Analog Devices MAX3232 Data Sheet (Rev. 10) specifies four 0.1uF external charge-pump capacitors for this implementation.
What is the difference between MAX3232CSE+TG1Z and MAX3232ECUE+T?
Both devices are MAX3232-family 1Mbps RS-232 interface ICs associated with the 16-pin SOIC footprint, but the operating-temperature and ordering-code details must be checked before substitution. According to the Analog Devices MAX3232 Data Sheet (Rev. 10), the MAX3232 family provides two transmitters, two receivers, and operation from 3.0V to 5.5V. Verify temperature grade, marking, pin assignment, and qualification requirements.
What is the difference between MAX3232CSE+TG1Z and MAX3232ESE+?
The MAX3232ESE+ is another 16-pin SOIC ordering option in the MAX3232 family, while MAX3232CSE+TG1Z carries an additional supplier ordering suffix. According to the Analog Devices MAX3232 Data Sheet (Rev. 10), the family supports 3.0V to 5.5V operation and rates up to 1Mbps. Confirm the exact temperature range, package dimensions, marking, and production configuration before interchange.
When should I choose MAX3232CSE+TG1Z over MAX3232ECUE+T?
Choose MAX3232CSE+TG1Z when the design requires the exact 16-pin SOIC ordering code and its documented operating characteristics. Choose MAX3232ECUE+T only after confirming that its temperature grade, electrical limits, pin functions, and qualification status satisfy the application. Both belong to the MAX3232 interface family, but ordering-code differences should be treated as qualification items rather than assumed interchangeability.
Is MAX3232CSE+TG1Z suitable for industrial controller communication?
The MAX3232CSE+TG1Z is suitable for industrial controller communication when the selected temperature grade and system protection requirements are met. It supports two RS-232 transmitters, two receivers, a 3.0V to 5.5V supply range, and rates up to 1Mbps according to the Analog Devices MAX3232 Data Sheet (Rev. 10). Add suitable cable-side transient protection and verify grounding in the final installation.
What can replace MAX3232CSE+TG1Z?
A drop-in replacement must use the same 16-pin SOIC footprint, preserve pin-to-pin connections, and meet the required voltage, data-rate, temperature, and interface specifications. MAX3232CSE+, MAX3232ECUE+T, and MAX3232ESE+ are same-family candidates identified in the cross-reference material, but each ordering code requires a separate temperature and marking check. Review the manufacturer data sheet before approving a substitution.
Is MAX3232CSE+TG1Z the same as MAX3232CSE+?
The MAX3232CSE+TG1Z and MAX3232CSE+ refer to closely related MAX3232CSE ordering configurations, but the supplier suffix must be checked for packing, reel, temperature, and manufacturing details. The Analog Devices MAX3232 Data Sheet (Rev. 10) identifies the electrical family as 3.0V to 5.5V, up to 1Mbps, with two drivers and two receivers in a 16-pin SOIC package.
What is the best Analog Devices alternative for MAX3232CSE+TG1Z?
The closest Analog Devices alternatives are MAX3232CSE+, MAX3232ECUE+T, and MAX3232ESE+, because they are identified as MAX3232-family 16-pin SOIC options. A valid replacement still requires review of temperature range, shutdown or power-management features, exact pinout, and ordering configuration. The Analog Devices MAX3232 Data Sheet (Rev. 10) remains the controlling document for those checks.

Справочные инженерные данные для MAX3232CSE+TG1Z — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose MAX3232CSE+TG1Z when the design requires the exact ordering code, a 16-pin SOIC footprint, two RS-232 transmitters, two receivers, 3.0V to 5.5V operation, and data rates up to 1Mbps. MAX3232CSE+ is a closely related same-family choice when its packing and suffix configuration meet the production plan. Consider MAX3232ECUE+T or MAX3232ESE+ only after checking the exact pinout, temperature range, shutdown behavior, and qualification requirements. The MAX3232CSE+TG1Z is particularly suitable for industrial controllers, embedded service ports, data-acquisition equipment, and dual RS-232 links. It is not the correct choice for a receiver-only or transmitter-only board, nor for an RS-485 design. No replacement should be approved solely because it is labeled RS-232; verify pin compatibility, electrical thresholds, supply range, data rate, temperature grade, and external capacitor requirements.

Сравнение с аналогами

Параметр Этот товар MAX3232CSE+ MAX3232ECUE+T MAX3232ESE+
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Transmitter and Receiver Count 2 transmitters and 2 receivers 2 transmitters and 2 receivers 2 transmitters and 2 receivers 2 transmitters and 2 receivers
Interface Standard True RS-232 True RS-232 RS-232 RS-232
Mounting Type Surface Mount Surface Mount Surface Mount Surface Mount

Ключевые отличия

  • Single-supply true RS-232 operation (против MAX3232ECUE+T)
  • Two transmitters and two receivers in a compact package (против MAX3232ESE+)
  • No external negative supply requirement (против MAX3232CSE+)

Заметки по проектированию

Place the four 0.1uF charge-pump capacitors close to their corresponding C1+, C1-, C2+, C2-, V+, and V- pins, and minimize loop area. Follow the pin and polarity arrangement in the Analog Devices MAX3232 Data Sheet (Rev. 10). Short, direct connections reduce switching transients coupled into receiver inputs, especially when the interface sits beside clocks, processors, or high-speed memory.

Keep RS-232 driver outputs and receiver inputs away from the charge-pump nodes and unrelated high-current switching paths. Route the ground return with a low-impedance path and maintain a common reference between the logic ground and connected RS-232 equipment. When a cable leaves the enclosure, place the protection network near the connector so transient current is diverted before it reaches the transceiver.

Do not substitute an RS-232 receiver-only or driver-only IC without redesigning the board, and do not treat every 16-pin RS-232 transceiver as automatically interchangeable. Verify the complete pinout, logic input thresholds, receiver input range, temperature grade, charge-pump capacitor arrangement, and shutdown behavior. Also confirm that UART signal polarity and timing remain compatible with the connected equipment.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer product page identifies the MAX3232 family as being in production, but no specific compliance declaration for this exact ordering code was identified. Confirm the current material and environmental declarations before a regulated production release.

Данные проверены: 2026-11-09 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MAX3232CSE+TG1Z datasheet MAX3232CSE+TG1Z pinout MAX3232CSE+TG1Z datasheet pdf MAX3232CSE+TG1Z equivalent MAX3232CSE+TG1Z replacement MAX3232CSE+TG1Z cross reference MAX3232CSE+TG1Z price MAX3232CSE+TG1Z stock Analog Devices MAX3232CSE+TG1Z MAX3232CSE+TG1Z 16-SOIC MAX3232CSE+TG1Z RS-232 transceiver MAX3232CSE+TG1Z industrial serial interface MAX3232CSE+TG1Z vs MAX3232ECUE+T MAX3232CSE+TG1Z application circuit

Связанные компоненты & термины

Analog Devices MAX3232CSE+TG1Z MAX3232CSE+ MAX3232ECUE+T MAX3232ESE+ RS-232 true RS-232 transceiver line driver line receiver interface IC serial communications UART CMOS logic TTL logic dual charge pump 1Mbps data rate 3.0V to 5.5V supply 16-pin SOIC SOIC package family surface-mount package industrial automation programmable logic controller data acquisition RS-232 connector
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ