Analog Devices

MAX3232EEAE+ - 15kV ESD 16-SSOP RS-232 IC | Analog Devices

Артикул: MAX3232EEAE+ ✓ Активен
3.0 V to 5.5 V Vdss SSOP-16 Package
MOQ: 1 |

MAX3232EEAE+ Обзор

The Analog Devices MAX3232EEAE+ is a 2-driver/2-receiver true RS-232 transceiver with ±15 kV ESD protection, a 3.0 V to 5.5 V supply range, and operation up to 1 Mbps in a 16-pin SSOP package. The interface converts logic-level signals between an asynchronous controller and a serial connector while maintaining RS-232 electrical behavior.

A true RS-232 transceiver is an interface IC that integrates line drivers, line receivers, and charge-pump circuitry. Its role in the hierarchy is UART controller to RS-232 transceiver to serial connector. This is different from a UART transceiver that handles only logic-level signaling or an RS-485 interface, which uses differential signaling. The MAX3232EEAE+ is intended for industrial-control, instrumentation, and embedded data links requiring a compact multi-line interface.

The main features include two transmit drivers, two receive receivers, dual charge-pump voltage generation, ±15 kV ESD protection, and a low-power design described as operating down to 10 nA. Its 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V systems. Data rates of up to 1 Mbps make the device suitable for moderate-speed serial links, including legacy RS-232 ports, point-to-point equipment interfaces, and industrial service connections.

The dual charge-pump architecture generates the positive and negative voltage levels required by true RS-232 drivers from a single low-voltage supply. Four external charge-pump capacitors support the internal voltage conversion. The integrated receivers invert the incoming RS-232 levels and provide compatible logic-level outputs to the host UART. The Analog Devices MAX3232E data sheet, Rev. 13, identifies the device as a true RS-232 transceiver with pin-to-pin protection on the serial-port connections.

Typical applications include industrial serial adapters, programmable-logic-controller service ports, instrumentation interfaces, embedded controller communication, and point-to-point control links. The compact 16-pin SSOP package helps reduce board area when two drivers and two receivers are required. The 1 Mbps maximum data rate provides ample margin for many legacy serial protocols, although cable length, baud rate, grounding, and signal integrity must be evaluated together.

For layout, follow the charge-pump capacitor connections and polarity shown in the manufacturer data sheet exactly. Place the four external capacitors close to their associated pins, route serial outputs away from sensitive analog inputs, and provide a low-impedance return path between connected equipment. Use an appropriate connector and board-level protection strategy when exposed cables carry greater electrostatic-discharge risk.

This page combines the MAX3232E family specifications, ordering information, pin-compatible alternatives, application guidance, and practical interface-design notes. It is intended to help engineers confirm package fit, voltage compatibility, protection requirements, and replacement strategy before integrating the MAX3232EEAE+ into an RS-232 design.

Аналоги без доработки для MAX3232EEAE+ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MAX3232EEAE+ (тот же форм-фактор и посадочное место) — отличается по ESD Protection, Supply Voltage Range, Interface Standard, Package, Product Type.

Texas Instruments
ESD Protection: ±15 kV using the human-body model
Supply Voltage Range: 3 V to 5.5 V
Package: 16-SSOP
Сравнить с MAX3232EEAE+ →
Analog Devices
Interface Standard: True RS-232
Package: 16-pin SSOP
Product Type: Full RS-232 transceiver
Сравнить с MAX3232EEAE+ →

MAX3232EEAE

✅ Прямая замена
📦 SSOP-16
Ordering suffix differs by 0% in the specified 2-driver/2-receiver interface, 3.0 V to 5.5 V supply, 1 Mbps speed, and ±15 kV ESD ratings

📋 Справочный аналог (нет в каталоге)

MAX3232EEAE+ Характеристики

Product Type True RS-232 transceiver
Line Drivers 2
Line Receivers 2
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
ESD Protection ±15 kV
Low-Power Operation Down to 10 nA
Charge Pumps 2
External Charge-Pump Capacitors 4 capacitors
Package Type SSOP-16
Число выводов 16 pins
Тип монтажа Surface mount
Interface Standard TIA/EIA-232-F

Руководство по цоколевке MAX3232EEAE+ в корпусе ssop-16

Цоколевка для MAX3232EEAE+ (корпус ssop-16). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса ssop-16 для MAX3232EEAE+

Нет подробных данных о распиновке для MAX3232EEAE+.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MAX3232EEAE+ подходит для 6 применениеs: Industrial Serial Port Interface, Embedded Controller Serial Link, Test and Measurement Equipment, Point-to-Point Control Systems, Instrumentation and Data Acquisition, Legacy Computer and Peripheral Connectivity.

🏭

Industrial Serial Port Interface

The MAX3232EEAE+ fits industrial equipment that must translate between a 3.3 V or 5 V UART and a true RS-232 connector. Its two drivers and two receivers support a compact point-to-point interface, while the 3.0 V to 5.5 V supply range accommodates both common logic rails. The Analog Devices MAX3232E data sheet, Rev. 13, specifies operation up to 1 Mbps and ±15 kV ESD protection, useful characteristics for service ports connected through exposed cables. Place the four required charge-pump capacitors close to their pins and route driver outputs away from sensitive analog nodes.

🧩

Embedded Controller Serial Link

The MAX3232EEAE+ provides a straightforward interface between an embedded controller's UART and an external RS-232 device. Two driver and two receiver channels allow bidirectional communication when both ends of the link are RS-232, and the 3.0 V to 5.5 V range supports common embedded supply rails. The 1 Mbps capability is substantially above many legacy peripheral baud rates. Use the manufacturer application circuit as the PCB-layout reference, maintain a common ground reference, and verify the selected connector and cable shielding against the installation environment.

🔧

Test and Measurement Equipment

The MAX3232EEAE+ is appropriate for test and measurement instruments that need a legacy RS-232 control or data port alongside modern UART logic. The 2/2 channel configuration provides enough drivers and receivers for common point-to-point instrument arrangements without occupying a larger multi-channel package. Its ±15 kV ESD protection helps improve interface robustness, while operation from 3.0 V to 5.5 V simplifies supply planning. Confirm equipment-grounding practices, use shielded cable where appropriate, and keep external charge-pump capacitors close to the device to follow the reference circuit.

⚡

Point-to-Point Control Systems

The MAX3232EEAE+ can serve as the electrical interface in point-to-point control and monitoring systems where one controller communicates with a remote subsystem over RS-232. Its true RS-232 drivers and receivers are intended for unbalanced serial connections, and the dual charge pump generates the required signal levels from one low-voltage supply. The 1 Mbps maximum data rate allows operation beyond many legacy serial-port speeds. Design the cable route and grounding carefully, because connector protection alone does not replace proper signal-return and enclosure practices.

📊

Instrumentation and Data Acquisition

The MAX3232EEAE+ is suitable for instrumentation modules that exchange commands or measurement data with a host computer through RS-232. The two receivers and two drivers offer a balanced channel count for typical request-and-response arrangements, while low-power operation down to 10 nA can benefit compact systems. The device operates from 3.0 V to 5.5 V and supports rates up to 1 Mbps. Place external capacitors close to the charge-pump pins, keep receive traces away from switching nodes, and use the Analog Devices application diagram as the layout baseline.

🖥️

Legacy Computer and Peripheral Connectivity

The MAX3232EEAE+ provides a practical bridge between a modern embedded UART and a legacy RS-232 peripheral. Its 3.0 V minimum supply supports 3.3 V systems, while the 5.5 V maximum allows use in established 5 V equipment. Two drivers and two receivers are sufficient for several desktop-style peripheral connections, and the 1 Mbps rating provides headroom for common serial baud rates. Verify the exact logic polarity, pin assignment, and connector wiring in the manufacturer data sheet before production, and confirm that any baud-rate inversion or hardware handshaking is handled correctly.

What is the MAX3232EEAE+ used for?
The MAX3232EEAE+ is a true RS-232 interface IC containing two line drivers and two line receivers for communicating between a UART controller and a serial connector. According to the Analog Devices MAX3232E data sheet, Rev. 13, it includes a dual charge-pump circuit, operates from 3.0 V to 5.5 V, and supports data rates up to 1 Mbps.
What is the operating voltage of MAX3232EEAE+?
The MAX3232EEAE+ operates from 3.0 V to 5.5 V, making it suitable for both 3.3 V and 5 V systems. The Analog Devices MAX3232E data sheet, Rev. 13, identifies this supply range while describing the device as a true RS-232 transceiver with two drivers, two receivers, and integrated charge-pump circuitry.
How fast can MAX3232EEAE+ transmit RS-232 data?
The MAX3232EEAE+ supports RS-232 data rates up to 1 Mbps. The Analog Devices MAX3232E data sheet, Rev. 13, lists the maximum operating speed as 1 Mbps. Actual link performance also depends on UART timing, cable length, connector wiring, grounding, interference, and the baud rate selected by the system firmware.
Where can I download the MAX3232EEAE+ datasheet PDF?
The MAX3232EEAE+ datasheet is available through the official Analog Devices MAX3232E product page at https://www.analog.com/en/products/max3232e.html. That page provides the manufacturer data sheet, Rev. 13, together with product information and ordering resources. Use the manufacturer document for the definitive pin description, application circuit, charge-pump capacitor values, and operating limits.
Where can I find the MAX3232EEAE+ pinout?
The MAX3232EEAE+ pinout is shown in the Analog Devices MAX3232E data sheet, Rev. 13, under the pin-description and device-information sections. The device uses a 16-pin SSOP package with four external charge-pump capacitors connected according to the manufacturer application diagram. Assign PCB nets directly from that table rather than inferring names from a generic SSOP drawing.
Is the MAX3232EEAE+ pin-compatible with MAX3232EEAE?
The MAX3232EEAE+ and MAX3232EEAE identify the same MAX3232E family device in the 16-pin SSOP package, with the ordering suffix distinguishing the lead-free catalog designation or packaging treatment. The Analog Devices family page states that MAX3232E devices share the MAX232 functional platform. Verify the manufacturer ordering table for the exact reel, tube, and temperature-grade suffix used by your production BOM.
What is the best drop-in replacement for MAX3232EEAE+?
The MAX3232EEAE is the closest catalog drop-in alternative because it identifies the same Analog Devices MAX3232E family device in the 16-pin SSOP package and retains the two-driver, two-receiver architecture. No cross-brand part was confirmed as pin-for-pin compatible in the available cross-reference results, so do not substitute a generically similar RS-232 transceiver without checking its SSOP-16 pinout and charge-pump connections.
Can MAX3232EUE+ replace MAX3232EEAE+?
The MAX3232EUE+ should not be treated as a strict drop-in replacement because it is identified as a 16-pin TSSOP device, while the MAX3232EEAE+ is a 16-pin SSOP device. Although both implement the MAX3232E function class, engineers must verify body dimensions, lead geometry, pin numbering, and PCB land patterns before considering a mixed-package substitution. The manufacturer product page is the controlling source for compatibility.
MAX3232EEAE+ vs MAX3232ECUE+T: which is better for a compact PCB?
Choose the MAX3232EEAE+ when the PCB footprint and assembly process specifically target the SSOP-16 version, and choose the MAX3232ECUE+T when its TSSOP-16 footprint is already supported. Both belong to the MAX3232E low-power transceiver family, but the package designation differs. The decisive factors are the existing land pattern, pinout alignment, assembly capability, and the specific ordering suffix.
When should I choose MAX3232EEAE+ over another RS-232 transceiver?
Choose the MAX3232EEAE+ when the design needs a true RS-232 interface with two drivers, two receivers, 3.0 V to 5.5 V operation, and data rates up to 1 Mbps in an SSOP-16 footprint. According to the Analog Devices MAX3232E data sheet, Rev. 13, it also provides ±15 kV ESD protection. Select another device only when a different package, channel count, supply range, or protection requirement is needed.
Is MAX3232EEAE+ suitable for industrial RS-232 equipment?
The MAX3232EEAE+ is suitable for many industrial RS-232 interfaces because it provides true RS-232 signal generation, ±15 kV ESD protection, and operation from 3.0 V to 5.5 V. The Analog Devices MAX3232E data sheet, Rev. 13, also identifies compliance with TIA/EIA-232-F. Final suitability still depends on the required temperature range, system surge exposure, cable arrangement, and grounding implementation.
Where can I buy MAX3232EEAE+ and check current stock?
Use the Request a Quote form on this page to ask about MAX3232EEAE+ availability, current lead time, and order quantity. The request can include the required package, temperature, and tape-and-reel or tube preference. Because production planning depends on changing inventory and sourcing conditions, confirm the exact suffix and delivery schedule before releasing the purchase order.
How much does MAX3232EEAE+ cost?
The current commercial price and volume breaks for MAX3232EEAE+ are available through the Request a Quote form on this page. Submit the required quantity, package form, and target delivery location to receive an updated quotation. For design budgeting, avoid copying historical figures because distributor pricing and inventory can change independently of the device specifications.
What is the lead time for MAX3232EEAE+?
The current MAX3232EEAE+ lead time is available through the Request a Quote form on this page. Include your production quantity, acceptable delivery date, and packaging requirement so procurement can confirm the appropriate supply route. For schedule planning, also identify whether the assembly line accepts the SSOP-16 package and whether tape-and-reel or another delivery format is required.
Is MAX3232EEAE+ currently in stock?
Current stock for MAX3232EEAE+ should be confirmed through the Request a Quote form on this page because inventory is time dependent. The request should state the quantity and required suffix or packaging format. Purchasing from an unverified listing can create package or lot-control risks, so confirm the device marking, package, and production requirements before shipment.
What are the key specifications of MAX3232EEAE+ that engineers should know?
The MAX3232EEAE+ is a 2-driver/2-receiver true RS-232 transceiver in a 16-pin SSOP package. Its headline specifications are a 3.0 V to 5.5 V supply range, operation up to 1 Mbps, and ±15 kV ESD protection. The Analog Devices MAX3232E data sheet, Rev. 13, also describes dual charge-pump operation, four required external capacitors, and low-power operation down to 10 nA.
Does MAX3232EEAE+ need external charge-pump capacitors?
Yes, the MAX3232EEAE+ requires four small external capacitors to support its dual charge-pump circuitry. The Analog Devices MAX3232E data sheet, Rev. 13, shows these components in the recommended application circuit and specifies their connections. Use the capacitor values and placement shown in the manufacturer data sheet, and place each capacitor close to the corresponding device pin.
How should MAX3232EEAE+ be laid out for ESD and signal integrity?
Place the four charge-pump capacitors close to their associated MAX3232EEAE+ pins and route the charge-pump connections as short as practical. Keep RS-232 driver outputs away from sensitive receiver inputs and high-impedance analog nodes, and provide a solid ground return for connected equipment. The Analog Devices MAX3232E data sheet, Rev. 13, provides the reference application circuit and pin assignments that should guide PCB routing.

Справочные инженерные данные для MAX3232EEAE+ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the MAX3232EEAE+ when the design requires a true RS-232 interface with two drivers and two receivers, operation from 3.0 V to 5.5 V, speeds up to 1 Mbps, and an SSOP-16 footprint. The MAX3232EEAE is the closest confirmed catalog alternative because it uses the same package and family specifications, but the exact ordering suffix and delivery format must still match the BOM. Do not select the MAX3232EUE+ or MAX3232ECDR as no-PCB-change drop-ins: their TSSOP-16 and SOIC-16 packages require footprint review. For new designs, evaluate the MAX3232EEAE+ when its 2/2 channel count, 1 Mbps capability, and specified ±15 kV ESD protection satisfy the interface requirements. Choose another transceiver only if it provides a necessary package, channel-count, supply-voltage, temperature, protection, or lifecycle advantage.

Сравнение с аналогами

Параметр Этот товар MAX3232EEAE
Package SSOP-16 SSOP-16
Brand Analog Devices Analog Devices
Device Type True RS-232 transceiver True RS-232 transceiver
Number of Drivers 2 2
Number of Receivers 2 2
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps 1 Mbps
ESD Protection ±15 kV ±15 kV
External Charge-Pump Capacitors 4 capacitors 4 capacitors
Interface Compliance TIA/EIA-232-F TIA/EIA-232-F

Ключевые отличия

  • Compact two-channel true RS-232 interface (против MAX3232EEAE)
  • Integrated electrostatic-discharge protection (против MAX3232EEAE)
  • True RS-232 operation from a single low-voltage supply (против MAX3232EEAE)

Заметки по проектированию

Use the Analog Devices MAX3232E data sheet, Rev. 13, application diagram as the authority for the four external charge-pump capacitors. Place each capacitor close to the associated IC pin and minimize loop area around the charge-pump connections. Correct capacitor value, polarity where applicable, and pin assignment are essential because incorrect connections can prevent the drivers from producing valid RS-232 levels.

Keep the two RS-232 driver outputs physically separated from sensitive receiver inputs and nearby low-level analog circuitry. Route serial traces over a continuous ground reference, avoid long stubs to connectors, and provide a direct return path between communicating systems. Although the device provides ±15 kV ESD protection, board layout and enclosure grounding remain part of the system-level ESD strategy.

Do not treat SSOP-16, TSSOP-16, and SOIC-16 as interchangeable footprints solely because each has 16 pins. The MAX3232EUE+ is identified as TSSOP-16 and the MAX3232ECDR as SOIC-16, while the MAX3232EEAE+ uses SSOP-16. Check body width, lead span, land pattern, and counterclockwise pin numbering against the PCB footprint before approving a substitute.

Confirm the exact ordering suffix, temperature grade, and delivery format when releasing a BOM. The base part, lead-free designation, and tape-and-reel suffix are separate ordering details, and mixing them can create assembly or traceability issues. Have procurement confirm the marking and package against the approved manufacturer ordering table before accepting material.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer product page identifies TIA/EIA-232-F interface compliance. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the available product information.

Данные проверены: 2026-11-17 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MAX3232EEAE+ datasheet MAX3232EEAE+ pinout MAX3232EEAE+ datasheet pdf MAX3232EEAE+ SSOP-16 MAX3232EEAE+ equivalent MAX3232EEAE+ replacement MAX3232EEAE+ vs MAX3232EEAE MAX3232EEAE+ RS-232 transceiver MAX3232EEAE+ price MAX3232EEAE+ stock Analog Devices MAX3232EEAE+ MAX3232EEAE+ application circuit

Связанные компоненты & термины

Analog Devices MAX3232EEAE+ MAX3232EEAE MAX3232E MAX3232EUE+ MAX3232ECDR RS-232 transceiver true RS-232 line driver line receiver UART interface dual charge pump logic-level serial interface TIA/EIA-232-F ESD protection SSOP-16 SSOP package family surface-mount package 3.3 V logic industrial serial communication instrumentation interface point-to-point serial link
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ