Analog Devices

MAX3232EEUP+G1Z - 1Mbps RS-232 Transceiver | Analog Devices

Артикул: MAX3232EEUP+G1Z ✓ Активен
3.0 V to 5.5 V Vdss Down to 10 nA Id 20-TSSOP, 0.173 inch (4.40 mm) width Package
MOQ: 1 |

MAX3232EEUP+G1Z Обзор

The Analog Devices MAX3232EEUP+G1Z is a true RS-232 transceiver with two drivers and two receivers, ±15 kV ESD protection, a 3.0 V to 5.5 V supply range, and operation up to 1 Mbps in a 20-pin TSSOP package. It converts TTL/CMOS logic levels to and from RS-232 differential signals, making it suitable for industrial control, data acquisition, instrumentation, and legacy peripheral connections.

An RS-232 transceiver is an interface IC that bridges the logic-voltage domain of a digital system and the bipolar signal domain used by RS-232 equipment. It combines line drivers, receivers, charge-pump support circuitry, and ESD protection into one device. The MAX3232 belongs to the broader interface IC hierarchy, where it functions as a physical-layer communications component between embedded controllers and an external RS-232 port.

The device provides true RS-232 output levels rather than limited-voltage RS-232 signaling. Its ±15 kV ESD protection helps protect the transceiver pins when a cable is connected or disconnected. Operation from 3.0 V to 5.5 V allows use in both 3.3 V and 5 V systems, while the maximum data rate of 1 Mbps supports communication rates substantially above common legacy serial-port operating speeds. The low-power design is specified for supply current down to 10 nA under applicable low-power conditions.

The MAX3232 family uses integrated charge-pump circuitry to generate the positive and negative voltage rails needed by true RS-232 drivers. Four external capacitors support this operation, while the IC handles signal conditioning and level translation. Its two-driver, two-receiver arrangement suits point-to-point links in which each endpoint can transmit and receive. Because the +G1Z ordering code identifies a specific package and production configuration, engineers should verify the ordering information, tape orientation, and lead-free status before releasing a production order.

Typical uses include programmable-logic-controller serial links, industrial equipment interfaces, test and measurement instruments, barcode readers, security equipment, and embedded control systems. A controller can connect its logic-level UART pins to the MAX3232EEUP+G1Z and communicate through a standard DE-9 connector. Cable length, baud rate, grounding, termination, and connector shield design remain system-level considerations even when the IC supports rates up to 1 Mbps.

Place the charge-pump capacitors close to their associated pins and route the RS-232 traces away from sensitive analog or high-speed digital circuits. Provide a stable ground reference between the two connected systems, and use appropriate transient protection for cables exposed to industrial or outdoor environments. This page combines interface-family positioning, pin-compatible alternatives, and application-oriented design guidance to support component selection and board planning.

Аналоги без доработки для MAX3232EEUP+G1Z — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MAX3232EEUP+G1Z (тот же форм-фактор и посадочное место) — отличается по Package, Supply Voltage Range, ESD Protection, Maximum Data Rate.

Analog Devices
Package: 20-pin TSSOP
Supply Voltage Range: 3.0V to 5.5V
ESD Protection: ±15kV
Сравнить с MAX3232EEUP+G1Z →
Maxim Integrated
Package: 16-pin SOIC (N)
Сравнить с MAX3232EEUP+G1Z →

MAX3232EEUP+

✅ Прямая замена
Analog Devices
📦 20-TSSOP
RS-232 transceiver · 2 · 2 · 3.0V to 5.5V · 1Mbps · ±15kV · Down to 10nA · True RS-232

Уточнить цену

Открыть даташит →

MAX3232EEAE

✅ Прямая замена ⚠️ Характеристики не проверены
📦 20-TSSOP
Same MAX3232E 20-TSSOP interface and retained 1 Mbps class; commercial ordering and temperature configuration require verification.

📋 Справочный аналог (нет в каталоге)

MAX3232EETT

✅ Прямая замена ⚠️ Характеристики не проверены
📦 20-TSSOP
Same MAX3232E 20-TSSOP pin-compatible family with 1 Mbps capability; temperature grade and ordering suffix differ from the target configuration.

📋 Справочный аналог (нет в каталоге)

MAX3232ESA

✅ Прямая замена ⚠️ Характеристики не проверены
📦 20-TSSOP
Same MAX3232E 20-TSSOP family and true-RS-232 function; the ordering suffix identifies a different configuration requiring full specification review.

📋 Справочный аналог (нет в каталоге)

MAX3232ESE+TG035

✅ Прямая замена ⚠️ Характеристики не проверены
Maxim Integrated
📦 20-TSSOP
RS-232 Transceiver (2 drivers, 2 receivers) · 3.0 V to 5.5 V · Up to 1 Mbps · 4 x 0.1 uF · -40C to +85C (E grade) · 16-pin SOIC (N)

Уточнить цену

Открыть даташит →

MAX3232EEUP+G1Z Характеристики

Product Type RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Interface Standard True RS-232
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
ESD Protection ±15 kV
Low-Power Supply Current Down to 10 nA
Корпус 20-TSSOP, 0.173 inch (4.40 mm) width
Тип монтажа Surface mount

Руководство по цоколевке MAX3232EEUP+G1Z в корпусе 20-tssop, 0.173 inch (4.40 mm) width

Цоколевка для MAX3232EEUP+G1Z (корпус 20-tssop, 0.173 inch (4.40 mm) width). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 20-tssop, 0.173 inch (4.40 mm) width для MAX3232EEUP+G1Z

Нет подробных данных о распиновке для MAX3232EEUP+G1Z.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MAX3232EEUP+G1Z подходит для 6 применениеs: Industrial PLC Serial Communication, Data Acquisition and Test Equipment, Embedded Controller Service Port, Security and Access Equipment, Instrumentation and Measurement Systems, Legacy Peripheral Connectivity.

🏭

Industrial PLC Serial Communication

The MAX3232EEUP+G1Z connects a 3.3 V or 5 V programmable controller to a legacy RS-232 service port. Its two drivers and two receivers support bidirectional point-to-point communication, while the 3.0 V to 5.5 V operating range aligns with common industrial control logic. The 1 Mbps capability provides substantial baud-rate headroom, and ±15 kV ESD protection strengthens the interface against cable-connected transients. Engineers should still design the enclosure, ground path, connector retention, and cable routing for the installation environment because IC-level protection does not replace industrial surge suppression.

🔧

Data Acquisition and Test Equipment

The MAX3232EEUP+G1Z is useful in data-acquisition instruments and laboratory controllers that retain an RS-232 command or download port. A host UART can communicate through the IC's true RS-232 drivers and receivers, eliminating the need for external level translators in many designs. Its operation from 3.0 V to 5.5 V permits use beside both legacy 5 V logic and modern 3.3 V systems, while the 1 Mbps rating supports rapid command traffic. Preserve signal-to-noise margin by keeping the transceiver and its charge-pump capacitors away from analog inputs, clocks, and precision reference circuitry.

🧩

Embedded Controller Service Port

The MAX3232EEUP+G1Z can provide a robust service and configuration port on an embedded controller, gateway, or industrial terminal. Its 3.0 V minimum supply voltage suits compact 3.3 V designs, and the true-RS-232 drivers generate the required positive and negative signal levels in one IC. The two-channel receiver arrangement is useful for handshake, status, or acknowledgment signals alongside a primary data channel. For field-service equipment, place a dedicated protection network near the connector and ensure chassis or signal-ground bonding follows the interface specification to avoid ESD-related resets or data corruption.

🎥

Security and Access Equipment

The MAX3232EEUP+G1Z can support configuration or diagnostic links in access-control terminals, cameras, and intercom equipment. A compact 20-TSSOP package preserves board area, while ±15 kV ESD protection adds useful resilience for equipment connected to user-accessible cables. The two-driver/two-receiver arrangement permits bidirectional command exchange and hardware handshaking. Design the cable entry and connector shield carefully, because repeated cable handling can generate electrostatic discharge beyond the IC pins; retain short ground-return paths and place any supplementary surge-protection device close to the connector.

📡

Instrumentation and Measurement Systems

The MAX3232EEUP+G1Z suits laboratory instruments that communicate with host computers through RS-232. Its 1 Mbps maximum data rate is suitable for command traffic, calibration data, and moderate measurement-result transfers, while its 3.0 V to 5.5 V supply range allows flexible logic integration. True RS-232 signaling supports compatibility with older host equipment that requires bipolar levels. Keep the serial interface electrically separated from sensitive analog sections where practical, and verify grounding across bench instruments because ground-potential differences can overwhelm receiver margins even when the IC is operating correctly.

🖥️

Legacy Peripheral Connectivity

The MAX3232EEUP+G1Z provides a compact bridge between modern digital logic and legacy RS-232 peripherals such as printers, scanners, controllers, and service adapters. The +G1Z ordering configuration should be matched to the required production package and assembly process, while the electrical interface supports both 3.3 V and 5 V systems. Its integrated level translation reduces the number of discrete components required around a UART. Confirm connector gender, cable pin assignment, and whether hardware handshaking is required before finalizing the PCB, since software flow control and unsupported handshake pins should not be treated as interchangeable.

What are the key specifications of MAX3232EEUP+G1Z that engineers should know?
The MAX3232EEUP+G1Z is a 3.0 V to 5.5 V, two-driver/two-receiver true RS-232 transceiver rated for data rates up to 1 Mbps and ±15 kV ESD protection. It is packaged in a 20-pin TSSOP measuring 0.173 inch, or 4.40 mm, in width. According to the Analog Devices MAX3232E product page, the MAX3232 family is pin, package, and functionally compatible with the industry-standard MAX232, providing a practical baseline for legacy interface upgrades.
What is the operating voltage of MAX3232EEUP+G1Z?
The MAX3232EEUP+G1Z operates from a 3.0 V to 5.5 V supply, so it supports both 3.3 V and 5 V digital systems. The Analog Devices MAX3232E product information identifies the device as a true RS-232 transceiver family member. When connecting it to a microcontroller, verify that the UART logic levels match the selected supply voltage and account for the supply current required by the driver and charge-pump sections.
How fast can MAX3232EEUP+G1Z transmit RS-232 data?
The MAX3232EEUP+G1Z supports RS-232 data rates up to 1 Mbps. This rating describes the transceiver's capability rather than the guaranteed end-to-end rate of a complete cable and connector system. The Analog Devices MAX3232E product page lists the MAX3232 family as operating up to 1 Mbps. Practical link performance also depends on cable length, baud rate, grounding, connector construction, and electromagnetic conditions.
Where can I download the MAX3232EEUP+G1Z datasheet PDF?
Start with the Analog Devices MAX3232E product page, which provides the official family documentation and product resources for the MAX3232E series. The exact ordering-code data should be confirmed against the MAX3232EEUP+G1Z datasheet and product ordering information before schematic release. This page also links to a technical datasheet listing for the MAX3232EEUP, which belongs to the same 20-pin TSSOP interface family.
Where can I find the MAX3232EEUP+G1Z pinout?
Use the pin-description table and package drawing in the official Analog Devices MAX3232EEUP datasheet to assign the 20 TSSOP pins. The verified product information identifies the physical package as 20-TSSOP with a 4.40 mm body width. Pin names are not reproduced here because the complete numbered pin-description table is not present in the retrieved product excerpts. In particular, verify charge-pump capacitor connections and the exact driver, receiver, and supply assignments before PCB routing.
Where can I buy MAX3232EEUP+G1Z online?
Use the Request a Quote form on this page to request MAX3232EEUP+G1Z, current inventory, and the required shipping quantity. The product is identified as a 20-TSSOP true RS-232 transceiver from Analog Devices. A request should specify reel or tube preference, production quantity, and any date-code requirements, allowing the purchasing team to confirm the exact +G1Z ordering configuration before committing the component to a BOM.
What is the price of MAX3232EEUP+G1Z?
Request a current quotation for MAX3232EEUP+G1Z through the Request a Quote form on this page. The form supports the exact MPN, quantity, delivery location, and packaging requirements, which are necessary because ordering-code, reel quantity, and market conditions can change. No fixed customer-facing price is stated on this page, and the quote should be confirmed before placing a production order.
What is the lead time for MAX3232EEUP+G1Z?
Request the current lead time through the Request a Quote form on this page. Lead time can vary with order quantity, stock position, assembly packaging, and the selected delivery terms. The retrieved product listings do not establish a universally current lead-time commitment, so procurement should request confirmation for the exact MAX3232EEUP+G1Z ordering code rather than relying on a generic family estimate.
Is MAX3232EEUP+G1Z in stock?
Use the Request a Quote form on this page to check current stock for MAX3232EEUP+G1Z. Inventory can vary by package, reel quantity, and fulfillment location, and a family-level stock indication does not guarantee availability of the exact ordering code. Include your required quantity and target delivery date in the request so the fulfillment team can provide a specific availability response.
What is the best drop-in replacement for MAX3232EEUP+G1Z?
The MAX3232EEUP+ is the closest documented drop-in choice for MAX3232EEUP+G1Z because both use the 20-TSSOP MAX3232EEUP family configuration and retain the 1 Mbps, 3.0 V to 5.5 V, and ±15 kV headline ratings. Verify the ordering suffix and tape configuration before substitution. The MAX3232EEAE, MAX3232EETT, MAX3232ESA, and MAX3232ESE also belong to the pin-compatible MAX3232E family, but each ordering code should be checked for temperature, packaging, and qualification requirements.
Can MAX3232EEUP replace MAX3232EEUP+G1Z?
The MAX3232EEUP can serve as a candidate replacement for MAX3232EEUP+G1Z after confirming the production configuration and packaging. Both are associated with the 20-TSSOP MAX3232EEUP family and the same 1 Mbps true-RS-232 interface class. The ordering suffix affects the exact commercial configuration, so verify tape orientation, reel quantity, temperature grade, and any qualification requirements before approving the substitution.
What is the difference between MAX3232EEUP+G1Z and MAX3232EEUP+?
MAX3232EEUP+G1Z and MAX3232EEUP+ are closely related 20-TSSOP configurations in the MAX3232EEUP family, with the same 3.0 V to 5.5 V supply range, 1 Mbps maximum data rate, and ±15 kV ESD-protection description. Their ordering codes may distinguish production packaging or other commercial attributes. Compare the exact manufacturer ordering table and package details before treating one as a direct substitute for the other.
When should I choose MAX3232EEUP+G1Z instead of MAX3232EEUP+?
Choose MAX3232EEUP+G1Z when its exact ordering code, packaging configuration, and sourcing conditions match the production design. Choose MAX3232EEUP+ when its documented configuration is acceptable and procurement needs an alternative way to source the same MAX3232EEUP interface family. The electrical headline ratings are effectively aligned at 3.0 V to 5.5 V, 1 Mbps, and ±15 kV, so the final decision should emphasize traceability, packaging, qualification, and lifecycle needs.
Is MAX3232EEUP+G1Z suitable for industrial control systems?
The MAX3232EEUP+G1Z is suitable for industrial control links when the surrounding system provides suitable grounding, cable protection, and environmental qualification. Its true RS-232 operation, 3.0 V to 5.5 V supply range, 1 Mbps capability, and ±15 kV ESD protection make it appropriate for connecting legacy equipment to embedded controllers. The connector, cable, isolation strategy, and enclosure must also be reviewed for the installation environment.
What is the best cross-brand equivalent for MAX3232EEUP+G1Z?
A cross-brand equivalent should be selected only after confirming the same 20-TSSOP footprint, pin-to-pin mapping, 3.0 V to 5.5 V supply operation, ±15 kV ESD rating, and at least the required 1 Mbps data rate. The retrieved cross-reference material does not identify a specific cross-brand drop-in part, so no unverified substitute is recommended. Request the manufacturer pinout and specifications for a proposed alternative and compare them line by line before PCB release.

Справочные инженерные данные для MAX3232EEUP+G1Z — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose MAX3232EEUP+G1Z when the design requires a true RS-232 interface with two drivers, two receivers, a 3.0 V to 5.5 V supply, ±15 kV ESD protection, and a 20-TSSOP footprint. MAX3232EEUP+ is the closest documented family alternative because it retains the same headline interface ratings and package; confirm ordering, reel, and production requirements before substitution. MAX3232EEAE and MAX3232EETT provide same-family TSSOP options when their temperature and ordering configurations satisfy the design. MAX3232ESA and MAX3232ESE require closer review because their suffixes identify different configurations. Do not select a substitute solely from package size: verify every numbered pin, charge-pump connection, UART-side signal, RS-232-side signal, ESD rating, supply range, and maximum data rate against the manufacturer pin-description table.

Сравнение с аналогами

Параметр Этот товар MAX3232EEUP+ MAX3232EEAE MAX3232EETT MAX3232ESA MAX3232ESE
Package 20-TSSOP, 4.40 mm width 20-TSSOP, same footprint 20-TSSOP, same footprint 20-TSSOP, same footprint 20-TSSOP, same footprint 20-TSSOP, same footprint
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type True RS-232 transceiver True RS-232 transceiver MAX3232E RS-232 transceiver family MAX3232E RS-232 transceiver family MAX3232E RS-232 transceiver family MAX3232E RS-232 transceiver family
Industry-Standard Compatibility Pin, package, and functionally compatible with MAX232 MAX3232 family compatibility with MAX232 MAX3232E family compatibility with MAX232 MAX3232E family compatibility with MAX232 MAX3232E family compatibility with MAX232 MAX3232E family compatibility with MAX232

Ключевые отличия

  • Maintains the documented MAX3232EEUP headline interface ratings (против MAX3232EEUP+)
  • Supports modern and legacy logic supply levels (против MAX3232ESA)
  • Combines bidirectional RS-232 conversion in a compact TSSOP (против MAX3232EETT)

Заметки по проектированию

Place the four charge-pump capacitors close to their designated MAX3232EEUP+G1Z pins, using short traces and a common ground reference. Keep the compact charge-pump loop away from sensitive analog inputs, precision references, and clock circuits. Route the true RS-232 driver and receiver nets directly toward the protection network and connector, and avoid sharing narrow paths with clocks, switching regulators, or isolated communication barriers. This arrangement reduces loop area and limits coupling from the high-energy driver transitions into nearby measurement circuitry.

Do not treat RS-232 logic levels and TTL/CMOS levels as interchangeable. The MAX3232EEUP+G1Z converts between the UART-side logic signals and the bipolar RS-232 port, so the transceiver-side pins must connect to the controller UART while the line-side pins connect through the cable and connector. Verify DE-9 pin numbering, signal-ground selection, and hardware-handshake requirements. Substituting a TTL-level driver or an RS-485 transceiver into the same footprint can fail because the voltage levels, connector wiring, and fault behavior differ.

Connect the interface ground to the appropriate signal ground and keep the return path continuous between communicating systems. Ground-potential differences between two devices can reduce receiver margin or cause data corruption when a long cable ties their grounds together. Use the smallest practical loop area, shield the external cable according to the installation class, and terminate shields to chassis ground at the appropriate boundary. For long or electrically noisy installations, add qualified surge and ESD protection at the connector rather than relying solely on the IC's internal ±15 kV protection.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The +G1Z ordering suffix and manufacturer documentation should be checked for the production configuration and environmental compliance status.

Данные проверены: 2026-11-09 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MAX3232EEUP+G1Z datasheet MAX3232EEUP+G1Z pinout MAX3232EEUP+G1Z datasheet pdf MAX3232EEUP+G1Z specifications Analog Devices MAX3232EEUP+G1Z MAX3232EEUP+G1Z equivalent MAX3232EEUP+G1Z replacement MAX3232EEUP+G1Z cross reference MAX3232EEUP+G1Z vs MAX3232EEUP+ MAX3232EEUP+G1Z TSSOP pinout MAX3232EEUP+G1Z price MAX3232EEUP+G1Z stock MAX3232EEUP+G1Z industrial control MAX3232EEUP+G1Z RS-232 interface MAX3232EEUP+G1Z schematic

Связанные компоненты & термины

Analog Devices MAX3232EEUP+G1Z MAX3232EEUP+ MAX3232EEAE MAX3232EETT MAX3232ESA MAX3232ESE MAX3232E MAX232 RS-232 true RS-232 transceiver interface IC physical-layer interface two-driver two-receiver transceiver TTL/CMOS logic level bipolar RS-232 signal charge-pump circuitry ESD protection 20-TSSOP TSSOP package family surface-mount package RS-232 data rate supply voltage embedded serial interface industrial serial communication
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ