Analog Devices

MAX3243EAI+G1Z - 250kbps RS-232 Transceiver | Analog Devices

Артикул: MAX3243EAI+G1Z ✓ Активен
3 V to 5.5 V Vdss 1 µA Id 28-pin SSOP Package
MOQ: 1 |

MAX3243EAI+G1Z Обзор

The Analog Devices MAX3243EAI+G1Z is a 3.5 V RS-232 line driver and receiver interface IC with three transmit drivers, five receive receivers, and 250 kbps data-rate capability, housed in a 28-pin SSOP package. The device operates from a 3 V to 5.5 V supply, features ±15 kV ESD protection, and includes AutoShutdown power management.

An RS-232 transceiver is the electrical interface between a digital UART or asynchronous communication controller and a serial connector. It converts low-voltage CMOS logic levels into RS-232-compatible levels and receives RS-232 signals for conversion back to logic levels. The MAX3243 belongs to the RS-232 interface IC, communications-interface, and power-management semiconductor hierarchy.

The MAX3243E family combines three drivers and five receivers in a single device, allowing several serial functions or an additional monitoring receiver to share one interface. Its ±15 kV ESD protection applies to the serial-port connection pins, while its 250 kbps capability supports data rates above the conventional 115.2 kbps rate commonly used by legacy UART equipment.

A dual charge-pump circuit supports the voltage conversion required by RS-232. The MAX3243E family also provides automatic shutdown and wake-up behavior, reducing supply current when no valid receiver signal is present. The MAX3243EAI+G1Z is identified as a 28-pin SSOP industrial-temperature ordering configuration, although detailed temperature and package dimensions should be confirmed against the ordering information in the manufacturer datasheet before release.

Typical uses include multiport serial adapters, industrial equipment interfaces, POS terminals, instrumentation, data-acquisition systems, and embedded controller links. The five receivers are especially useful when a system needs more incoming channels than the three outgoing driver channels, such as monitor, status, or handshake signals.

For a new PCB, place the charge-pump capacitors and interface bypass capacitors exactly as shown in the manufacturer’s recommended layout. Route TX and RX traces away from sensitive analog circuitry, keep the connector-side protection path short, and verify signal levels, ground references, and supply sequencing before production.

This page consolidates the manufacturer’s interface details, ordering information, application guidance, and available substitution research into a design-focused guide. It also identifies where an exact drop-in alternative is confirmed and where a proposed substitute requires careful pinout and protocol validation before use.

Аналоги без доработки для MAX3243EAI+G1Z — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MAX3243EAI+G1Z (тот же форм-фактор и посадочное место) — отличается по Maximum Data Rate, Power Management Feature, Product Type, Supply Voltage Range.

Maxim Integrated
Maximum Data Rate: 235 kbps
Power Management Feature: AutoShutdown and automatic wake-up
Product Type: RS-232 transceiver
Сравнить с MAX3243EAI+G1Z →

MAX3243EAI+

✅ Прямая замена
Maxim Integrated
📦 28-pin SSOP
RS-232 transceiver · 3 · 5 · +3 V to +5.5 V · 235 kbps · 1 µA · AutoShutdown and automatic wake-up · Dual charge-pump circuit

Уточнить цену

Открыть даташит →

MAX3243EAI+G1Z Характеристики

Product Type RS-232 line driver and receiver transceiver IC
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 250 kbps
Number of Transmit Drivers 3 drivers
Number of Receive Channels 5 receivers
ESD Protection ±15 kV HBM
Ток потребления 1 µA
Power Management Feature AutoShutdown automatic shutdown and wake-up
Communication Standard EIA/TIA-232-F
Interface Signaling V.28/V.24
Charge-Pump Circuit Dual charge-pump circuit
Число выводов 28 pins
Корпус 28-pin SSOP
Тип монтажа Surface mount
ESD Protected Pins Serial-port connection pins including GND

Руководство по цоколевке MAX3243EAI+G1Z в корпусе 28-pin ssop

Цоколевка для MAX3243EAI+G1Z (корпус 28-pin ssop). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 28-pin ssop для MAX3243EAI+G1Z

Нет подробных данных о распиновке для MAX3243EAI+G1Z.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MAX3243EAI+G1Z подходит для 6 применениеs: Industrial serial data acquisition, Multiport RS-232 adapter, Point-of-sale terminal interface, Embedded controller RS-232 link, Test and measurement instrumentation, Portable equipment service port.

🏭

Industrial serial data acquisition

The MAX3243EAI+G1Z fits industrial data-acquisition equipment that must exchange asynchronous serial data with sensors, analyzers, or laboratory instruments. Its three transmit drivers support command and control traffic, while five receivers provide additional inputs for status, acknowledgment, or monitoring signals. The 250 kbps rate exceeds common 115.2 kbps UART operation, and the 3 V to 5.5 V supply range supports both 3.3 V and 5 V control systems. The ±15 kV HBM ESD protection strengthens the connector-side interface against industrial handling transients, while AutoShutdown can reduce current when connected equipment is idle.

🔧

Multiport RS-232 adapter

A multiport adapter can use the MAX3243EAI+G1Z when one connector or internal link must present multiple RS-232 functions. Three driver outputs are sufficient for transmit, receive-data, and handshake or control signaling, while the five receiver channels can monitor several incoming lines or support additional downstream ports. Its 250 kbps capability allows design teams to use faster UART modes where the connected equipment supports them. The 28-pin SSOP package conserves board area, and AutoShutdown behavior is valuable in portable or intermittently connected adapters where idle-system current must remain low.

🖥️

Point-of-sale terminal interface

The MAX3243EAI+G1Z is appropriate for point-of-sale terminals that communicate with peripherals through legacy RS-232 links. Three driver channels can support outbound commands and handshake signals, while five receiver inputs allow the terminal to monitor multiple peripheral responses without adding separate receiver packages. Its 3 V to 5.5 V operating range simplifies integration with both legacy 5 V and modern 3.3 V logic systems. The ±15 kV HBM ESD protection adds useful margin at accessible connector pins, although the complete enclosure, grounding, and cable-shield design must still meet the product’s ESD and EMC requirements.

🤖

Embedded controller RS-232 link

The MAX3243EAI+G1Z provides a practical bridge between a UART-based embedded controller and an RS-232 device. Its dual charge-pump circuit performs the required level conversion, while three driver outputs can support data, request, and flow-control signals. A fifth receiver channel offers additional readback or monitoring capability beyond the minimum data and handshake paths. At a maximum 250 kbps, the device supports conventional serial ports and higher-rate short-distance links. The SSOP footprint and 3 V minimum supply are useful in compact controller boards where board area and mixed-voltage power design are important constraints.

📺

Test and measurement instrumentation

The MAX3243EAI+G1Z suits bench instruments and portable test equipment that use RS-232 for remote commands, calibration data, or instrument-status reporting. Three drivers handle command, measurement, and handshake outputs, and five receivers can accept responses from several instruments or status lines from one link. The 250 kbps rate supports fast transfer of moderate command and result blocks. AutoShutdown helps portable instruments conserve power when the remote link is inactive, while the 28-pin SSOP package leaves room for analog, display, and measurement circuitry on crowded instrument boards.

📱

Portable equipment service port

The MAX3243EAI+G1Z can support a service or configuration port in portable electronics that need a wired RS-232 interface during installation or maintenance. Its three drivers and five receivers permit a richer control interface than a basic two-channel UART bridge, including request, acknowledgment, and status signals. Operation from 3 V to 5.5 V allows use with rechargeable-system rails and legacy service interfaces. When the connected host is inactive, AutoShutdown reduces supply consumption, which is especially helpful in battery-operated equipment. Firmware should use deterministic line-state logic to avoid interpreting disconnected or floating RS-232 inputs as valid commands.

What is the MAX3243EAI+G1Z?
The MAX3243EAI+G1Z is a 3.5 V RS-232 transceiver IC from Analog Devices, combining three transmit drivers and five receive receivers in a 28-pin SSOP package. According to the manufacturer datasheet, it supports data rates up to 250 kbps, operates from 3 V to 5.5 V, and provides ±15 kV HBM ESD protection on serial-port connection pins.
What are the key specifications of MAX3243EAI+G1Z that engineers should know?
The MAX3243EAI+G1Z provides three RS-232 drivers, five receivers, a 250 kbps maximum data rate, and a 3 V to 5.5 V operating range. The manufacturer datasheet also identifies ±15 kV HBM ESD protection and AutoShutdown behavior. Its 28-pin SSOP package makes it suitable for compact serial-interface designs, while the dual charge-pump circuit handles RS-232 voltage conversion.
Where can I download the MAX3243EAI+G1Z datasheet PDF?
The manufacturer-hosted MAX3243 datasheet is available through the official Analog Devices product page and the linked TI-hosted document entry. The document contains the device overview, ordering information, recommended operating conditions, electrical characteristics, pin descriptions, and application circuits. Use the exact MAX3243EAI+G1Z ordering code to confirm the selected SSOP package and temperature grade.
Where can I find the MAX3243EAI+G1Z pinout?
The MAX3243EAI+G1Z pinout is presented in the pin-description and package-drawing sections of the manufacturer datasheet. The device uses a 28-pin SSOP configuration with three driver channels, five receiver channels, power pins, control functions, and charge-pump nodes. Assign PCB connections directly from the manufacturer’s pin table rather than relying only on a third-party package drawing.
Is the MAX3243EAI+G1Z suitable for industrial equipment?
The MAX3243EAI+G1Z is suitable for industrial serial-interface designs when its ordering temperature grade matches the system’s environmental requirements. Its 3 V to 5.5 V supply range, ±15 kV HBM ESD protection, and 250 kbps capability suit instrument, data-acquisition, and controller interfaces. Confirm the exact operating-temperature limits and production-grade information in the manufacturer ordering table.
How much power does the MAX3243EAI+G1Z consume?
The MAX3243EAI+G1Z can reduce its supply consumption to approximately 1 µA when AutoShutdown detects no valid signal on the receiver inputs. According to the manufacturer product information, the on-board supply and drivers shut down in this condition and wake when a valid signal returns. The 3 V to 5.5 V operating range supports both 3.3 V and 5 V system rails.
What RS-232 standard does MAX3243EAI+G1Z support?
The MAX3243EAI+G1Z meets the requirements of EIA/TIA-232-F and operates as a V.28/V.24 communications interface. The manufacturer datasheet identifies it as the electrical interface between an asynchronous communication controller and a serial-port connector. Its three drivers and five receivers can also support additional incoming status or monitoring signals.
Can MAX3237EAI+ replace MAX3243EAI+G1Z?
The MAX3237EAI+ should not be treated as a confirmed drop-in replacement for the MAX3243EAI+G1Z. Although both devices appear in RS-232 substitution research, the MAX3237 family has a different transmitter-to-receiver channel count. A replacement must preserve the 28-pin SSOP footprint, pin functions, driver and receiver counts, logic levels, and shutdown behavior before it is approved for an existing PCB.
Can MAX3243EEUI+T replace MAX3243EAI+G1Z?
The MAX3243EEUI+T is not confirmed as a drop-in replacement for the MAX3243EAI+G1Z because the ordering code indicates a different package option and the published comparison does not establish the same SSOP footprint. The MAX3243 family shares core RS-232 functions, but PCB compatibility still depends on identical lead count, body width, pin numbering, and pin assignment.
What can replace MAX3243EAI+G1Z?
The closest confirmed same-family replacement is MAX3243EAI+, which represents the corresponding MAX3243E AI package configuration without the G1Z ordering suffix. The MAX3243 family also includes other package or ordering options, but they should be accepted only after comparing the package drawing and pin table. No cross-brand part is presented as a verified drop-in replacement.
When should I choose MAX3243EAI+G1Z over another RS-232 transceiver?
Choose the MAX3243EAI+G1Z when a design requires three driver outputs, five receiver inputs, operation from 3 V to 5.5 V, and a 250 kbps data rate in a 28-pin SSOP. It is especially useful when extra incoming channels are needed for monitoring or handshake signals. A lower-channel-count transceiver may be preferable only when its pinout, package, and shutdown characteristics have also been verified.
Is MAX3243EAI+G1Z the same as MAX3243EAI+?
The MAX3243EAI+ and MAX3243EAI+G1Z belong to the same MAX3243E AI ordering family, but the full ordering codes should not be treated as interchangeable without checking the manufacturer ordering table. The published target is a 28-pin SSOP device. Verify package, temperature range, lead style, tape-and-reel status, and any automotive or production-grade designation before substitution.
What is the best Analog Devices equivalent for MAX3243EAI+G1Z?
The best identified Analog Devices-family option is MAX3243EAI+, because it retains the MAX3243E AI ordering family and is the closest available counterpart in the cross-reference results. Its suitability for an installed board still requires confirmation of the package drawing and pin assignments. No MAX3237 or MAX3243EEUI option should be called a guaranteed drop-in replacement for the SSOP target.
Where can I buy MAX3243EAI+G1Z online?
Use the Request a Quote form on this page to request MAX3243EAI+G1Z availability, current commercial terms, and lead time. The exact device is listed as a 28-pin SSOP RS-232 transceiver, and current fulfillment should be confirmed against the full ordering code. XAIPART handles the quotation request directly rather than directing buyers to other sellers.
What is the price of MAX3243EAI+G1Z?
The current commercial price for MAX3243EAI+G1Z is obtained through the Request a Quote form on this page. The form allows buyers to specify quantity, target delivery date, and required packaging so the quotation reflects the intended order. No static price is shown because commercial pricing and availability can change with quantity and market conditions.
What is the lead time and stock status for MAX3243EAI+G1Z?
The current lead time and stock status for MAX3243EAI+G1Z should be confirmed through the Request a Quote form on this page. Include the required quantity and whether tape-and-reel, cut-tape, or another authorized delivery format is needed. This approach provides an order-specific commitment rather than an unverified availability statement.

Справочные инженерные данные для MAX3243EAI+G1Z — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the MAX3243EAI+G1Z when the design requires three RS-232 transmit channels, five receive channels, 3 V to 5.5 V operation, and data rates up to 250 kbps in a 28-pin SSOP footprint. Its extra receiver inputs are useful for status, monitoring, and handshake signals that would otherwise require additional interface circuitry. MAX3243EAI+ is the closest identified family alternative when its exact ordering, temperature, and shipping configuration satisfy the project. MAX3237EAI+ has fewer receiver channels and a different architecture, so it should be treated as a redesign option rather than a drop-in part. MAX3243EEUI+T belongs to the same device family but uses a different package configuration and therefore requires footprint verification. For an existing PCB, approve a substitute only after checking body dimensions, lead pitch, pin numbering, pin functions, logic thresholds, shutdown behavior, and ESD ratings.

Сравнение с аналогами

Параметр Этот товар MAX3243EAI+
Brand Analog Devices Analog Devices
Package 28-pin SSOP 28-pin SSOP
Product Type 3-driver/5-receiver RS-232 transceiver 3-driver/5-receiver RS-232 transceiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps
ESD Protection ±15 kV HBM ±15 kV HBM
AutoShutdown Supply Current 1 µA 1 µA
Transmitter Channels 3 3
Receiver Channels 5 5
Compliance Standard EIA/TIA-232-F EIA/TIA-232-F

Ключевые отличия

  • Five receiver inputs in a compact RS-232 interface (против MAX3237EAI+)
  • Faster supported serial data rate (против MAX3237EAI+)
  • Closest same-family ordering option (против MAX3243EEUI+T)

Заметки по проектированию

Use the manufacturer’s recommended layout for the charge-pump capacitors and place those components close to their designated pins. Keep the high-voltage driver and receiver paths away from low-level logic and analog traces. The external RS-232 connector, protection network, and transceiver should be positioned so connector-side surge current follows a short, direct return path rather than passing through sensitive circuitry.

Decouple the 3 V to 5.5 V supply with the capacitance and placement specified in the manufacturer application circuit. The charge-pump circuit generates the bipolar voltages required by RS-232, so unstable supply voltage or poorly decoupled pump nodes can increase jitter or interfere with data transmission. Confirm startup, logic-level thresholds, and receiver output states when the supply crosses the 3 V operating boundary.

Do not treat an RS-232 receiver output as a valid command unless the interface firmware confirms a valid mark, bias, or line state. AutoShutdown can wake the receivers when a connected or floating line appears active, so robust state-machine design and appropriate connector termination are important. Also verify that every replacement retains the same channel count, shutdown behavior, logic levels, and SSOP pin assignments.

RS-232 driver outputs carry high-voltage, fast-edge transitions that can couple into nearby circuitry. Maintain the recommended spacing between TX and RX routes, return connector shields to the chassis or designated ground strategy, and avoid routing unprotected outputs around sensitive analog inputs. Validate conducted and radiated emissions on the final assembly because cable length, grounding, and enclosure construction can materially affect system-level EMI performance.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The component is described as an RS-232 communications interface meeting EIA/TIA-232-F. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated in the cited product and distributor information.

Данные проверены: 2026-11-09 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MAX3243EAI+G1Z MAX3243EAI+G1Z datasheet MAX3243EAI+G1Z datasheet pdf MAX3243EAI+G1Z pinout MAX3243EAI+G1Z equivalent MAX3243EAI+G1Z replacement MAX3243EAI+G1Z cross reference MAX3243EAI+G1Z footprint MAX3243EAI+G1Z price MAX3243EAI+G1Z stock Analog Devices MAX3243EAI+G1Z MAX3243 250kbps RS-232 transceiver MAX3243 3V to 5.5V interface IC MAX3243 28-pin SSOP pinout MAX3243EAI+G1Z industrial interface

Связанные компоненты & термины

Analog Devices Maxim Integrated MAX3243EAI+G1Z MAX3243EAI+ MAX3243EEUI+T MAX3237EAI+ RS-232 transceiver RS-232 line driver RS-232 receiver EIA/TIA-232-F V.28/V.24 interface AutoShutdown dual charge-pump circuit 250 kbps data rate ±15 kV HBM ESD protection 3 V to 5.5 V power supply 28-pin SSOP SSOP package family surface-mount package UART communications interface industrial serial interface data-acquisition equipment point-of-sale terminal embedded controller semiconductor
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ