Texas Instruments

MAX3243EIPWR - 500kbps 3/5 RS-232 Transceiver | Texas Instruments (Tape & Reel)

Артикул: MAX3243EIPWR ✓ Активен
3 V to 5.5 V Vdss 28-pin TSSOP (PW) Package
MOQ: 1 |

MAX3243EIPWR Обзор

The Texas Instruments MAX3243EIPWR is a 3-to-5.5 V multichannel RS-232 line driver and receiver supporting a maximum data rate of 500 kbps. It integrates three drivers and five receivers in a 28-pin TSSOP (PW) package, and its transceiver outputs provide plus or minus 15 kV IEC electrostatic-discharge protection.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received line-level signals back into CMOS-compatible logic. In the broader electronics hierarchy, the MAX3243EIPWR belongs to the interface-controller family, supports the EIA/TIA-232 communications standard, and provides the physical-layer signaling required between computers, industrial controllers, instrumentation, and other serial equipment.

The device combines three driver channels and five receiver channels in one package. Its 3-to-5.5 V supply range allows operation from both 3.3 V and 5 V systems, while the 500 kbps maximum data rate supports moderate-speed point-to-point serial links. Automatic shutdown and wake-up functions can reduce supply demand when the associated receiver is inactive, and plus or minus 15 kV IEC ESD protection improves robustness on cables exposed to electrostatic discharge.

The MAX3243EIPWR is a pin-compatible member of the MAX3243E interface family, and the TRS3243E designation provides a second-source ordering path for the same device. Its 28-pin TSSOP package is substantially smaller than the older 28-pin DIP representation and supports compact PCB construction. The industrial temperature grade covers minus 40°C to plus 85°C operation, making the device suitable for factory equipment, data acquisition systems, service interfaces, and embedded serial ports.

Typical applications include industrial control consoles, laboratory test equipment, point-of-sale terminals, security systems, external data-loggers, and embedded UART links. The three transmitters allow multiple outputs, while the five receivers support several incoming serial ports or multiple receive-connected inputs. The 500 kbps rate is appropriate for configuration transfers, status polling, command exchange, and short-distance industrial communication rather than continuous high-volume file transfers.

For layout, keep the IC close to the protected connector and route each RS-232 trace as a short, direct channel. Follow the manufacturer datasheet for charge-pump capacitors, driver output connections, receiver inputs, and the exact supply-bypass arrangement. Confirm signal polarity and receiver input states before enabling a channel, especially when replacing a legacy MAX3243 implementation.

This page combines the manufacturer specifications with practical transceiver application guidance, channel-count comparisons, package compatibility analysis, and design notes. These resources help engineers evaluate the MAX3243EIPWR for both new RS-232 designs and existing 28-pin TSSOP board revisions.

Аналоги без доработки для MAX3243EIPWR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MAX3243EIPWR (тот же форм-фактор и посадочное место) — отличается по ESD Protection, Maximum Data Rate, Package, Supply Voltage Range.

Analog Devices
ESD Protection: ±15 kV
Maximum Data Rate: 250 kbps
Package: 28-pin TSSOP
Сравнить с MAX3243EIPWR →

TRS3243EIPW

✅ Прямая замена
📦 28-pin TSSOP (PW)
Electrical ratings and channel configuration are identical at 3-5.5 V, 500 kbps, 3 drivers, and 5 receivers; the ordering code differs only as a second-source path

📋 Справочный аналог (нет в каталоге)

MAX3243CUI+

✅ Прямая замена
Analog Devices
📦 28-pin TSSOP
3.0 V to 5.5 V · 250 kbps · ±15 kV · 3 drivers · 5 receivers · 1 µA · 28-pin TSSOP · 3/5 full-duplex configuration

Уточнить цену

Открыть даташит →

MAX3243EIPWR Характеристики

Product Type Multichannel RS-232 line driver/receiver
Supply Voltage Range 3 V to 5.5 V
Maximum Data Rate 500 kbps
Driver Channels 3 channels
Receiver Channels 5 channels
Minimum Logic Voltage 3.3 V
ESD Protection plus or minus 15 kV IEC ESD protection
Диапазон рабочих температур -40°C to +85°C
Корпус 28-pin TSSOP (PW)
Тип монтажа Surface mount
Shutdown Feature Automatic shutdown and wake-up

Руководство по цоколевке MAX3243EIPWR в корпусе 28-pin tssop (pw)

Цоколевка для MAX3243EIPWR (корпус 28-pin tssop (pw)). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 28-pin tssop (pw) для MAX3243EIPWR

Нет подробных данных о распиновке для MAX3243EIPWR.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MAX3243EIPWR подходит для 6 применениеs: Industrial Controller Serial Ports, Laboratory Test and Measurement Equipment, Point-of-Sale and Service Terminals, Security and Access-Control Equipment, Embedded Data Logger, Computer and Peripheral Legacy Interfaces.

🏭

Industrial Controller Serial Ports

The MAX3243EIPWR suits industrial controllers that need several RS-232 connections on a compact board. Its three drivers and five receivers support three outbound channels and five inbound signals, while the 3-to-5.5 V supply range permits operation from either 3.3 V or 5 V control logic. The 500 kbps limit supports command polling, parameter downloads, alarm messages, and configuration transfer. Its minus 40°C to plus 85°C rating supports temperature-controlled factory equipment, while plus or minus 15 kV IEC ESD protection improves resistance to discharge on accessible cabling.

⚡

Laboratory Test and Measurement Equipment

The MAX3243EIPWR can connect laboratory instruments and automated test systems that exchange commands and results over RS-232. A 500 kbps channel is useful for instrument identification, measurement requests, status responses, and limited result transfers rather than continuous high-bandwidth waveforms. Three transmitter channels and five receiver channels allow a single instrument to control several devices or monitor multiple inputs. The 28-pin TSSOP package saves board space, and the 3-to-5.5 V range supports both legacy 5 V instrument logic and modern 3.3 V control platforms.

🖥️

Point-of-Sale and Service Terminals

The MAX3243EIPWR fits point-of-sale terminals and service equipment requiring several legacy serial ports in a constrained enclosure. Three driver channels can address printers, scanners, customer displays, or peripheral controllers, while five receiver channels provide inputs for status lines and handheld devices. The 500 kbps maximum rate is appropriate for transaction commands, receipt data, status polling, and short diagnostic records. The 28-pin TSSOP footprint helps preserve PCB area, and automatic shutdown and wake-up functions can reduce power use when selected receiver channels are inactive.

🎥

Security and Access-Control Equipment

The MAX3243EIPWR is suitable for access-control readers, alarm panels, and surveillance equipment that retain RS-232 commissioning or service interfaces. Its multiple channels allow one controller to communicate with several door stations or peripheral modules without requiring a separate transceiver per link. The 500 kbps capability accommodates identity records, event logs, configuration commands, and short firmware or log transfers. Plus or minus 15 kV IEC ESD protection is particularly relevant where service connectors enter industrial or outdoor enclosures, although cable routing and enclosure-level surge protection remain part of the system design.

🧩

Embedded Data Logger

The MAX3243EIPWR can connect sensors, data loggers, and remote monitoring units that use RS-232 for configuration and event reporting. The transceiver's three transmitter channels support separate command or alert outputs, while its five receiver channels can accept data from multiple sensors or instrument ports. A 500 kbps link is suitable for sampled status data, time stamps, alarms, and periodic records when continuous high-volume streaming is not required. Its industrial temperature range and compact TSSOP package allow deployment in equipment enclosures where space, operating temperature, and cable-discharge robustness affect component selection.

🔧

Computer and Peripheral Legacy Interfaces

The MAX3243EIPWR supports legacy computer and peripheral equipment that still uses RS-232 for configuration, diagnostics, or firmware communication. The three-driver and five-receiver arrangement supports several ports while limiting the number of physical interface ICs on the board. The 3-to-5.5 V supply range allows integration with both older 5 V systems and newer 3.3 V controllers. At 500 kbps, the device supports command exchanges and moderate data transfers, making it relevant for service equipment, industrial computers, and peripheral controllers that must bridge existing RS-232 infrastructure.

What is the MAX3243EIPWR?
The MAX3243EIPWR is a Texas Instruments 3-to-5.5 V multichannel RS-232 transceiver with three drivers, five receivers, a 500 kbps maximum data rate, and plus or minus 15 kV IEC ESD protection. It is packaged in a 28-pin TSSOP and is intended for bidirectional and multiport serial-interface systems. According to the manufacturer datasheet, it can operate from a 3.3 V or 5 V system.
Where can I download the MAX3243EIPWR datasheet PDF?
The official MAX3243E datasheet and product documentation are available through the Texas Instruments MAX3243E product page at https://www.ti.com/product/MAX3243E. The manufacturer product page links the complete data sheet, ordering information, package information, and supported variants. For PCB design, use the pin-description table and typical application diagrams in that manufacturer datasheet to assign all 28 TSSOP pins and external capacitors.
Where can I find the MAX3243EIPWR pinout?
The MAX3243EIPWR pinout is published in the Texas Instruments manufacturer datasheet and on the official MAX3243E product page. The device uses a 28-pin TSSOP package identified as PW. Use the package drawing for terminal dimensions and the pin-description table for each driver, receiver, supply, ground, and control connection. The pin numbering follows the package drawing and should be checked against the assembled board orientation.
What are the key specifications of MAX3243EIPWR that engineers should know?
The MAX3243EIPWR operates from 3 V to 5.5 V, supports data rates up to 500 kbps, and combines three RS-232 drivers with five receivers. It is specified over minus 40°C to plus 85°C and uses a 28-pin TSSOP package. Its most significant protection feature is plus or minus 15 kV IEC ESD protection on the transceiver outputs, according to the Texas Instruments manufacturer datasheet.
What is the maximum RS-232 data rate of MAX3243EIPWR?
The maximum RS-232 data rate of the MAX3243EIPWR is 500 kbps. This rate is suitable for configuration exchanges, command protocols, status polling, and moderate-speed point-to-point links. Cable length, capacitance, grounding, EMI conditions, and the selected baud rate can affect practical system margin, so verify the complete channel against the intended wiring using the manufacturer datasheet timing information.
Can MAX3243EIPWR operate from a 3.3 V supply?
Yes, the MAX3243EIPWR supports a 3-to-5.5 V supply range, making it suitable for 3.3 V and 5 V equipment. The manufacturer identifies a minimum logic voltage of 3.3 V. Follow the manufacturer datasheet when selecting the charge-pump capacitors and supply-bypass components, and confirm that the connected UART and downstream logic use compatible signal thresholds.
Where can I buy MAX3243EIPWR online?
Use the Request a Quote form on this page to request MAX3243EIPWR availability, unit pricing, and order handling from XAIPART. The form is the appropriate commercial channel for this part and allows the request to be matched to the exact MAX3243EIPWR ordering code. Confirm the 28-pin TSSOP package, delivery quantity, and required production quantities when submitting the request.
What is the price of MAX3243EIPWR?
Submit a request through the Request a Quote form on this page for the current MAX3243EIPWR price and quantity schedule. Commercial terms can vary with order quantity, production volume, and market conditions, so the form provides the current quote for the exact 28-pin TSSOP device rather than a static price that may quickly become outdated.
What is the lead time and stock status for MAX3243EIPWR?
Request the current MAX3243EIPWR stock position, lead time, and minimum order quantity through the Request a Quote form on this page. Availability depends on the exact ordering code, package variant, and requested production quantity. If your equipment requires continuity for a multi-year lifecycle, state that requirement and the annual usage volume in the quote request.
What is the best drop-in replacement for MAX3243EIPWR?
The TRS3243EIPW is the closest documented drop-in replacement because Texas Instruments identifies MAX3243E and TRS3243E as the same device offered under two ordering paths. It retains the 3-to-5.5 V supply, three drivers, five receivers, 500 kbps capability, enhanced IEC ESD protection, and 28-pin TSSOP footprint. Confirm the complete pin table and current quality status before releasing a substitution.
Is the MAX3243CUI equivalent to MAX3243EIPWR?
The MAX3243CUI is a strong second-source candidate because it provides the same three-driver, five-receiver RS-232 configuration, a 3.3 V minimum logic voltage, a 0.5 MBps data rate, and a compact 28-pin TSSOP package. It is not guaranteed to be an exact drop-in without checking enable, shutdown, charge-pump, and exposed-pad details against the manufacturer datasheets. A board revision is recommended before substituting it.
MAX3243EIPWR vs TRS3243EIPW - which is better?
Neither part is inherently better electrically because Texas Instruments states that MAX3243E and TRS3243E are the same device under different part numbers for second sourcing. Both families provide 3-to-5.5 V operation, 500 kbps data rates, and enhanced IEC ESD protection. Availability, qualification status, and procurement conditions should determine the preferred ordering code for a new production design.
When should I choose MAX3243EIPWR over TRS3243EIPW?
Choose MAX3243EIPWR when it is the approved ordering code in the component database, bill of materials, or approved-vendor list for your design. Choose TRS3243EIPW when that second-source path offers better continuity or procurement flexibility. Because the devices are electrically the same, final selection should follow organizational change control rather than an assumption that one ordering code has different transceiver performance.
Is MAX3243EIPWR suitable for industrial control equipment?
The MAX3243EIPWR is suitable for many industrial control and data-acquisition systems because it operates from 3 V to 5.5 V, supports rates up to 500 kbps, and covers minus 40°C to plus 85°C. Its plus or minus 15 kV IEC ESD protection is valuable on externally accessible cables. Final suitability still depends on the enclosure, grounding, cable transients, regulatory requirements, and isolation needs.
What can replace MAX3243EIPWR?
The documented drop-in choice is TRS3243EIPW, which Texas Instruments describes as the same MAX3243E/TRS3243E device under a second ordering number. The MAX3243CUI is another 28-pin TSSOP candidate with matching three-driver, five-receiver and 500 kbps characteristics, but it requires a detailed pin and shutdown-behavior review. Never assume a shared package alone proves replacement compatibility.

Справочные инженерные данные для MAX3243EIPWR — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose MAX3243EIPWR when the design needs three RS-232 drivers and five receivers in a 28-pin TSSOP package, operates from 3.3 V or 5 V, and requires 500 kbps communication with plus or minus 15 kV IEC ESD protection. Choose TRS3243EIPW when procurement continuity is the deciding factor because Texas Instruments identifies the MAX3243E and TRS3243E devices as electrically the same with different ordering paths. Consider MAX3243CUI as a second-source option with matching channel count and data rate, but review its enable, shutdown, charge-pump, and exposed-pad details against the board before substitution. For designs with only one or two RS-232 channels, MAX3221IPWR may provide a simpler and smaller solution. Regardless of ordering code, validate the complete interface against the intended cable length, baud rate, connector grounding, and EMC environment.

Сравнение с аналогами

Параметр Этот товар TRS3243EIPW MAX3243CUI
Package 28-pin TSSOP (PW) 28-pin TSSOP (PW) 28-pin TSSOP
Brand Texas Instruments Texas Instruments Analog Devices
Minimum Logic Voltage 3.3 V 3.3 V 3.3 V
Maximum Data Rate 500 kbps 500 kbps 0.5 MBps
Driver Channels 3 channels 3 channels 3 channels
Receiver Channels 5 channels 5 channels 5 channels

Ключевые отличия

  • Documented same-device second-source path (против TRS3243EIPW)
  • Three transmitters and five receivers in one package (против MAX3243CUI)
  • Broad logic compatibility (против TRS3243EIPW)

Заметки по проектированию

Place the MAX3243EIPWR near the RS-232 connector and route each driver and receiver channel directly to its corresponding connector pin. Keep the external charge-pump capacitor connections short and follow the manufacturer datasheet placement diagram exactly. The protected transceiver outputs should not be routed through long unprotected PCB traces before reaching the connector, because ESD performance depends on keeping the sensitive path short and providing a low-impedance return path.

Keep RS-232 signal traces away from switching-node and high-current supply paths to reduce capacitive coupling and radiated noise. Use a continuous ground reference under or beside the interface area, and connect connector shield or chassis ground according to the product's EMC strategy. Since the MAX3243EIPWR supports 500 kbps, inspect the assembled board for edge-rate distortion, excessive loading, and connector return-path discontinuities rather than evaluating only the nominal baud rate.

Do not treat RS-232 as a differential pair. The driver outputs use positive and negative signal levels relative to ground, while receiver inputs are single-ended. Confirm the intended driver-to-receiver connection, logic polarity, and shutdown state before energizing the board. Also avoid substituting a part solely because it has 28 pins; verify pin names, exposed-pad requirements, charge-pump connections, shutdown behavior, and package dimensions against the manufacturer datasheet.

Decouple the 3-to-5.5 V supply at the MAX3243EIPWR with the capacitance and placement specified by the manufacturer datasheet. Keep the charge-pump capacitor loop compact because long or narrow traces can increase switching transients and radiated emissions. Validate startup and shutdown behavior with the connected UART because automatic wake-up timing can affect the first communication attempt after power restoration.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer identifies plus or minus 15 kV IEC ESD protection, but separate RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified.

Похожие запросы

MAX3243EIPWR datasheet MAX3243EIPWR pinout MAX3243EIPWR datasheet pdf MAX3243EIPWR equivalent MAX3243EIPWR replacement MAX3243EIPWR cross reference MAX3243EIPWR vs TRS3243EIPW MAX3243EIPWR vs MAX3243CUI MAX3243EIPWR 28 pin TSSOP MAX3243EIPWR 500kbps RS-232 Texas Instruments MAX3243EIPWR MAX3243EIPWR price MAX3243EIPWR stock MAX3243EIPWR application circuit MAX3243EIPWR industrial control

Связанные компоненты & термины

Texas Instruments MAX3243EIPWR TRS3243EIPW MAX3243CUI MAX3221IPWR RS-232 transceiver RS-232 EIA/TIA-232 interface IC line driver line receiver CMOS logic 500 kbps plus or minus 15 kV IEC ESD protection 28-pin TSSOP TSSOP package surface mount industrial control laboratory test equipment data acquisition point-of-sale terminal automatic shutdown charge-pump capacitor RS-232 cable 3.3 V logic
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ