MAX3243EIPWR - 500kbps 3/5 RS-232 Transceiver | Texas Instruments (Tape & Reel)
MPN: MAX3243EIPWR ✓ فعالMAX3243EIPWR نمای کلی
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received line-level signals back into CMOS-compatible logic. In the broader electronics hierarchy, the MAX3243EIPWR belongs to the interface-controller family, supports the EIA/TIA-232 communications standard, and provides the physical-layer signaling required between computers, industrial controllers, instrumentation, and other serial equipment.
The device combines three driver channels and five receiver channels in one package. Its 3-to-5.5 V supply range allows operation from both 3.3 V and 5 V systems, while the 500 kbps maximum data rate supports moderate-speed point-to-point serial links. Automatic shutdown and wake-up functions can reduce supply demand when the associated receiver is inactive, and plus or minus 15 kV IEC ESD protection improves robustness on cables exposed to electrostatic discharge.
The MAX3243EIPWR is a pin-compatible member of the MAX3243E interface family, and the TRS3243E designation provides a second-source ordering path for the same device. Its 28-pin TSSOP package is substantially smaller than the older 28-pin DIP representation and supports compact PCB construction. The industrial temperature grade covers minus 40°C to plus 85°C operation, making the device suitable for factory equipment, data acquisition systems, service interfaces, and embedded serial ports.
Typical applications include industrial control consoles, laboratory test equipment, point-of-sale terminals, security systems, external data-loggers, and embedded UART links. The three transmitters allow multiple outputs, while the five receivers support several incoming serial ports or multiple receive-connected inputs. The 500 kbps rate is appropriate for configuration transfers, status polling, command exchange, and short-distance industrial communication rather than continuous high-volume file transfers.
For layout, keep the IC close to the protected connector and route each RS-232 trace as a short, direct channel. Follow the manufacturer datasheet for charge-pump capacitors, driver output connections, receiver inputs, and the exact supply-bypass arrangement. Confirm signal polarity and receiver input states before enabling a channel, especially when replacing a legacy MAX3243 implementation.
This page combines the manufacturer specifications with practical transceiver application guidance, channel-count comparisons, package compatibility analysis, and design notes. These resources help engineers evaluate the MAX3243EIPWR for both new RS-232 designs and existing 28-pin TSSOP board revisions.
جایگزینهای drop-in برای MAX3243EIPWR — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای MAX3243EIPWR (همان فرمفاکتور و فوتپرینت) — متفاوت در ESD Protection, Maximum Data Rate, Package, Supply Voltage Range.
TRS3243EIPW
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
MAX3243CUI+
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←MAX3243EIPWR مشخصات
| Product Type | Multichannel RS-232 line driver/receiver |
| Supply Voltage Range | 3 V to 5.5 V |
| Maximum Data Rate | 500 kbps |
| Driver Channels | 3 channels |
| Receiver Channels | 5 channels |
| Minimum Logic Voltage | 3.3 V |
| ESD Protection | plus or minus 15 kV IEC ESD protection |
| محدوده دمای کاری | -40°C to +85°C |
| بستهبندی | 28-pin TSSOP (PW) |
| نوع نصب | Surface mount |
| Shutdown Feature | Automatic shutdown and wake-up |
راهنمای پیکربندی پین MAX3243EIPWR 28-pin tssop (pw)
پیکربندی پین برای MAX3243EIPWR (پکیج 28-pin tssop (pw)). شمارهگذاری پایهها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعملهای لحیمکاری به آن مراجعه کنید.
داده پینآوت تفصیلی موجود نیست برای MAX3243EIPWR.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
MAX3243EIPWR مناسب است برای 6 کاربردs: Industrial Controller Serial Ports, Laboratory Test and Measurement Equipment, Point-of-Sale and Service Terminals, Security and Access-Control Equipment, Embedded Data Logger, Computer and Peripheral Legacy Interfaces.
Industrial Controller Serial Ports
The MAX3243EIPWR suits industrial controllers that need several RS-232 connections on a compact board. Its three drivers and five receivers support three outbound channels and five inbound signals, while the 3-to-5.5 V supply range permits operation from either 3.3 V or 5 V control logic. The 500 kbps limit supports command polling, parameter downloads, alarm messages, and configuration transfer. Its minus 40°C to plus 85°C rating supports temperature-controlled factory equipment, while plus or minus 15 kV IEC ESD protection improves resistance to discharge on accessible cabling.
پیشنهادی
Laboratory Test and Measurement Equipment
The MAX3243EIPWR can connect laboratory instruments and automated test systems that exchange commands and results over RS-232. A 500 kbps channel is useful for instrument identification, measurement requests, status responses, and limited result transfers rather than continuous high-bandwidth waveforms. Three transmitter channels and five receiver channels allow a single instrument to control several devices or monitor multiple inputs. The 28-pin TSSOP package saves board space, and the 3-to-5.5 V range supports both legacy 5 V instrument logic and modern 3.3 V control platforms.
پیشنهادی
Point-of-Sale and Service Terminals
The MAX3243EIPWR fits point-of-sale terminals and service equipment requiring several legacy serial ports in a constrained enclosure. Three driver channels can address printers, scanners, customer displays, or peripheral controllers, while five receiver channels provide inputs for status lines and handheld devices. The 500 kbps maximum rate is appropriate for transaction commands, receipt data, status polling, and short diagnostic records. The 28-pin TSSOP footprint helps preserve PCB area, and automatic shutdown and wake-up functions can reduce power use when selected receiver channels are inactive.
پیشنهادی
Security and Access-Control Equipment
The MAX3243EIPWR is suitable for access-control readers, alarm panels, and surveillance equipment that retain RS-232 commissioning or service interfaces. Its multiple channels allow one controller to communicate with several door stations or peripheral modules without requiring a separate transceiver per link. The 500 kbps capability accommodates identity records, event logs, configuration commands, and short firmware or log transfers. Plus or minus 15 kV IEC ESD protection is particularly relevant where service connectors enter industrial or outdoor enclosures, although cable routing and enclosure-level surge protection remain part of the system design.
پیشنهادی
Embedded Data Logger
The MAX3243EIPWR can connect sensors, data loggers, and remote monitoring units that use RS-232 for configuration and event reporting. The transceiver's three transmitter channels support separate command or alert outputs, while its five receiver channels can accept data from multiple sensors or instrument ports. A 500 kbps link is suitable for sampled status data, time stamps, alarms, and periodic records when continuous high-volume streaming is not required. Its industrial temperature range and compact TSSOP package allow deployment in equipment enclosures where space, operating temperature, and cable-discharge robustness affect component selection.
پیشنهادی
Computer and Peripheral Legacy Interfaces
The MAX3243EIPWR supports legacy computer and peripheral equipment that still uses RS-232 for configuration, diagnostics, or firmware communication. The three-driver and five-receiver arrangement supports several ports while limiting the number of physical interface ICs on the board. The 3-to-5.5 V supply range allows integration with both older 5 V systems and newer 3.3 V controllers. At 500 kbps, the device supports command exchanges and moderate data transfers, making it relevant for service equipment, industrial computers, and peripheral controllers that must bridge existing RS-232 infrastructure.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای MAX3243EIPWR — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | TRS3243EIPW | MAX3243CUI |
|---|---|---|---|
| Package | 28-pin TSSOP (PW) | 28-pin TSSOP (PW) | 28-pin TSSOP |
| Brand | Texas Instruments | Texas Instruments | Analog Devices |
| Minimum Logic Voltage | 3.3 V | 3.3 V | 3.3 V |
| Maximum Data Rate | 500 kbps | 500 kbps | 0.5 MBps |
| Driver Channels | 3 channels | 3 channels | 3 channels |
| Receiver Channels | 5 channels | 5 channels | 5 channels |
تفاوتهای کلیدی
- Documented same-device second-source path (در مقابلTRS3243EIPW)
- Three transmitters and five receivers in one package (در مقابلMAX3243CUI)
- Broad logic compatibility (در مقابلTRS3243EIPW)
یادداشتهای طراحی
Place the MAX3243EIPWR near the RS-232 connector and route each driver and receiver channel directly to its corresponding connector pin. Keep the external charge-pump capacitor connections short and follow the manufacturer datasheet placement diagram exactly. The protected transceiver outputs should not be routed through long unprotected PCB traces before reaching the connector, because ESD performance depends on keeping the sensitive path short and providing a low-impedance return path.
Keep RS-232 signal traces away from switching-node and high-current supply paths to reduce capacitive coupling and radiated noise. Use a continuous ground reference under or beside the interface area, and connect connector shield or chassis ground according to the product's EMC strategy. Since the MAX3243EIPWR supports 500 kbps, inspect the assembled board for edge-rate distortion, excessive loading, and connector return-path discontinuities rather than evaluating only the nominal baud rate.
Do not treat RS-232 as a differential pair. The driver outputs use positive and negative signal levels relative to ground, while receiver inputs are single-ended. Confirm the intended driver-to-receiver connection, logic polarity, and shutdown state before energizing the board. Also avoid substituting a part solely because it has 28 pins; verify pin names, exposed-pad requirements, charge-pump connections, shutdown behavior, and package dimensions against the manufacturer datasheet.
Decouple the 3-to-5.5 V supply at the MAX3243EIPWR with the capacitance and placement specified by the manufacturer datasheet. Keep the charge-pump capacitor loop compact because long or narrow traces can increase switching transients and radiated emissions. Validate startup and shutdown behavior with the connected UART because automatic wake-up timing can affect the first communication attempt after power restoration.
اطلاعات انطباق
The manufacturer identifies plus or minus 15 kV IEC ESD protection, but separate RoHS, REACH, halogen-free, and conflict-minerals declarations were not identified.