Analog Devices

MAX335ENG+ - 8-Channel SPST Analog Switch | Analog Devices

Артикул: MAX335ENG+ ✓ Активен
1 nA maximum Id 100 Ω typical Rds(on) 24-pin PDIP Package
MOQ: 1 |

MAX335ENG+ Обзор

The Analog Devices MAX335ENG+ is a serial-controlled, 8-channel single-pole-single-throw analog switch with a 24-pin PDIP package. It provides eight independently controlled switches, a 1:1 signal configuration, and an on-resistance of 100 Ω typical according to the manufacturer datasheet. A distributor listing characterizes the on-resistance as 150 Ω, so system-level calculations should use the value applicable to the selected operating conditions.

An analog switch is an integrated semiconductor device that routes electrical signals between terminals under digital control. The MAX335 belongs to the broader analog switch IC category, which falls within interface ICs and semiconductor signal-routing devices. Unlike a mechanical relay, it provides compact, solid-state signal isolation and control. Its serial interface allows a host controller to manage eight switch channels with a compact command structure instead of requiring a dedicated control line for every channel.

The principal features of the MAX335ENG+ are eight separately controlled SPST channels, equal signal conduction in either direction, and an on-resistance stated as 100 Ω typical over the analog signal range. The MAX335ENG+ ordering code denotes the 24-pin PDIP configuration and the temperature range identified by the manufacturer’s part-numbering system. These characteristics make it useful where multiple analog or digital signals must be selected, isolated, or routed under software control.

The MAX335 uses a serial digital interface for switch control. Because all eight switches share the same serial control mechanism, the device can reduce control-line count compared with a bank of discrete mechanically controlled analog switches. The on-resistance remains approximately constant across the analog signal range, helping simplify impedance calculations when the switch is placed in series with a source or load. Signal integrity still depends on capacitance, bandwidth, layout, source impedance, and the frequency content carried by the selected channel.

Typical uses include test and measurement signal routing, communication equipment, industrial control interfaces, data-acquisition systems, and embedded control systems that need to connect one signal source to one of several destinations. The eight-channel SPST organization can also implement isolation between a shared analog bus and peripheral circuits. It is especially useful where compact control, bidirectional conduction, and individually addressable channels are more important than ultra-low resistance.

When laying out a MAX335ENG+ circuit, keep analog traces short and provide a clean ground reference because the serial interface and switched signals must not share noisy return paths. Confirm the control protocol and timing from the manufacturer datasheet before writing firmware. Treat the stated 100 Ω typical on-resistance as a real impedance in the signal path and include its attenuation when calculating sensor, amplifier, or ADC input networks.

Аналоги без доработки для MAX335ENG+ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

MAX335CNG+

✅ Прямая замена
Analog Devices
📦 24-pin PDIP
8 switches · 1:1 SPST · 150 Ω · Approximately 100 Ω · +4.5 V to +20 V · -4.5 V to -20 V · Serial digital interface · 8 independently controlled SPST switches

Уточнить цену

Открыть даташит →

MAX335ENG

✅ Прямая замена
📦 24-pin PDIP
Same 8-channel 1:1 SPST architecture and 24-pin PDIP footprint; suffix-specific temperature-grade difference requires verification

📋 Справочный аналог (нет в каталоге)

MAX335ENG-T

✅ Прямая замена
📦 24-pin PDIP
Same 8-channel 1:1 SPST architecture and 24-pin PDIP footprint; -T identifies a packing configuration rather than a different circuit function

📋 Справочный аналог (нет в каталоге)

MAX335EWG-T

✅ Прямая замена
📦 24-pin PDIP
Same 8-channel 1:1 SPST architecture and 24-pin PDIP footprint; temperature-grade suffix differs while electrical channel count and configuration match

📋 Справочный аналог (нет в каталоге)

MAX335ENG+ Максимальные параметры и электрические характеристики

Product Type Serial-controlled analog switch IC
Number of Switches 8 circuits
Switch Configuration 1:1 SPST
On-Resistance 100 Ω typical
Distributor-Reported On-Resistance 150 Ω
Signal Conduction Direction Equal in either direction
Control Interface Serial digital interface
Channel Control 8 separately controlled switches
Корпус 24-pin PDIP
Тип монтажа Through-hole
Off-State Leakage Current 1 nA maximum
ECCN EAR99
Introduction Date July 1, 1996
Estimated End-of-Life Date 2028
Halogen-Free Status Compliant

Руководство по цоколевке MAX335ENG+ в корпусе 24-pin pdip

Цоколевка для MAX335ENG+ (корпус 24-pin pdip). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 24-pin pdip для MAX335ENG+

Нет подробных данных о распиновке для MAX335ENG+.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MAX335ENG+ подходит для 6 применениеs: Data-Acquisition Signal Routing, Test and Measurement Fixture Control, Industrial Control Signal Isolation, Communication Equipment Path Selection, Embedded Interface Switching, Programmable Analog Backplane.

📡

Data-Acquisition Signal Routing

The MAX335ENG+ fits data-acquisition systems that must route sensors, instrument outputs, or excitation signals under processor control. Its eight independently controlled SPST channels provide separate selection paths while the shared serial interface limits control-line demand. With 100 Ω typical on-resistance, the device is most appropriate when source impedance is high enough that the switch resistance does not dominate measurement accuracy. Keep switched traces short, establish a low-impedance analog ground, and account for the 100 Ω insertion resistance when scaling ADC input networks.

🔧

Test and Measurement Fixture Control

The MAX335ENG+ is suitable for test fixtures that connect instruments, standards, and device-under-test resources through software-addressable paths. Eight separately controlled SPST switches can isolate channels or connect a common resource to one destination at a time, while bidirectional conduction allows either the source or load side to be switched. The 100 Ω typical on-resistance can affect high-impedance measurements, so calibrate the fixture or use it where impedance variation is acceptable rather than in a precision low-resistance voltage path.

🏭

Industrial Control Signal Isolation

The MAX335ENG+ can isolate shared control or analog lines in industrial equipment when individual channels must be enabled according to machine state. Its eight separately controlled SPST switches permit firmware to establish signal paths without operating multiple relay coils. The serial control interface reduces the number of host pins needed for routing decisions, while the 24-pin PDIP package supports conventional through-hole assembly. Validate the exact operating-temperature grade, supply range, and signal ratings against the machine’s environmental requirements.

🌐

Communication Equipment Path Selection

The MAX335ENG+ can route communication signals among multiple circuit paths when the design needs eight individually controlled, bidirectional SPST channels. Bidirectional conduction is useful for shared buses, though the 100 Ω typical on-resistance introduces series loss and should be included in link-budget calculations for higher-frequency signals. Place the device away from switching-power nodes, provide a continuous ground path, and verify bandwidth and crosstalk characteristics for the actual channel impedance and clock rate.

🧩

Embedded Interface Switching

The MAX335ENG+ fits embedded systems that need software-controlled selection between external peripherals and shared buses. Its serial interface allows a microcontroller or programmable logic device to manage eight channels with a compact command sequence, reducing the GPIO burden associated with eight discrete control lines. Because every closed channel contributes approximately 100 Ω typical series resistance, design external buffers or instrumentation amplifiers when driving low-impedance inputs or measuring precision voltage thresholds.

⚡

Programmable Analog Backplane

The MAX335ENG+ can create a small programmable analog backplane in which one resource is connected to selected destinations through independent SPST channels. This arrangement is useful for power sequencing, source isolation, and repetitive test routing without relying on numerous mechanical relays. The shared serial control interface simplifies configuration, while the bidirectional switch behavior supports varied source and load arrangements. Use the datasheet timing information to avoid simultaneous switching events that could disturb sensitive downstream nodes.

What is the MAX335ENG+?
The MAX335ENG+ is an Analog Devices serial-controlled, 8-channel SPST analog switch in a 24-pin PDIP package. According to the manufacturer datasheet, every channel conducts equally in either direction, and the on-resistance is 100 Ω typical over the analog signal range. The device provides separate control for all eight switches through a serial digital interface.
How many independent switches does the MAX335ENG+ contain?
The MAX335ENG+ contains eight independently controlled single-pole-single-throw switches. The manufacturer describes each channel as an SPST switch with 1:1 signal configuration. This architecture allows the device to select or isolate eight signal paths independently while using a shared serial control interface rather than one external control line per channel.
What is the on-resistance of the MAX335ENG+?
The MAX335ENG+ has an on-resistance of 100 Ω typical according to the Analog Devices manufacturer datasheet. A distributor product listing separately describes the part as having 150 Ω on-resistance. Use the manufacturer value and relevant datasheet limits for design calculations, while confirming the intended supply, signal, and temperature conditions before releasing a production design.
Where can I download the MAX335ENG+ datasheet PDF?
The official MAX335ENG+ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/max335.pdf. Use the manufacturer datasheet for the serial-control protocol, timing, electrical characteristics, package drawing, and pin descriptions. The manufacturer product page at https://www.analog.com/en/products/max335.html provides the associated product overview and documentation links.
Where can I find the MAX335ENG+ pinout?
The MAX335ENG+ pin assignment is documented in the official MAX335 manufacturer datasheet, which covers the 24-pin PDIP package. Use the pin-description table and package drawing when assigning PCB nets because the device uses a serial interface rather than a separate control pin for every analog channel. The MAX335ENG+ is the through-hole 24-pin PDIP ordering option.
Can the MAX335ENG+ switch signals in both directions?
Yes, the MAX335ENG+ switches conduct equally in either direction. The Analog Devices manufacturer datasheet states this bidirectional behavior, allowing the eight SPST channels to be used for source selection, signal isolation, or signal-path routing. Bidirectional operation does not remove the need to check voltage, current, bandwidth, and logic-level limits for the signals being switched.
Is MAX335ENG+ a drop-in replacement for MAX335CNG+?
The MAX335ENG+ can be treated as a direct replacement candidate for MAX335CNG+ because both are identified as 24-pin PDIP, 8-channel SPST devices with matching terminal and package configuration. Final qualification should still confirm the temperature grade, supply requirements, control timing, and electrical limits for the specific sockets and operating conditions. No package change is indicated by the available comparison data.
What is the best drop-in replacement for MAX335ENG+?
The strongest documented drop-in candidate is the Analog Devices MAX335CNG+, which uses the same 24-pin PDIP format and provides the same eight-channel SPST architecture. The MAX335ENG and MAX335ENG-T ordering variants are also closely related, but their suffix-specific temperature and packing meanings must be checked before substitution. Use the manufacturer ordering guide and datasheet to confirm every configuration detail.
MAX335ENG+ vs MAX335CNG+ - which is better for an existing PCB?
Choose MAX335CNG+ for an existing 24-pin PDIP MAX335 socket when its electrical limits and temperature grade match the application. The available comparison identifies the same eight-channel SPST function, terminal arrangement, and package, making it the closest documented replacement candidate for MAX335ENG+. Confirm supply voltage, control timing, and operating temperature before treating it as a production drop-in.
When should I choose MAX335ENG+ instead of MAX335CNG+?
Choose MAX335ENG+ when its specified temperature grade, availability, or ordering configuration is required by the target operating environment. MAX335CNG+ is appropriate when its grade and lifecycle conditions better match the design. Both use a 24-pin PDIP footprint and implement the same eight-channel serial-controlled SPST function, so selection should be based on exact suffix-specific ratings rather than package convenience alone.
Is MAX335ENG+ suitable for industrial signal routing?
The MAX335ENG+ is suitable for industrial signal-routing designs when the device’s specified supply voltage, temperature range, leakage, switching speed, and reliability requirements are met. Its eight separately controlled SPST channels and bidirectional conduction are useful for test fixtures, control interfaces, and shared analog buses. Industrial suitability does not waive the need to verify worst-case operating conditions.
How much insertion loss should I expect from a MAX335ENG+ channel?
A closed MAX335ENG+ channel introduces the series on-resistance, stated as 100 Ω typical in the manufacturer datasheet, plus any additional losses introduced by switches, wiring, and the receiving circuit. At 1 MHz, a 100 Ω resistance alone produces approximately 0.043 dB of series loss before accounting for capacitance or source impedance. Use the full frequency-domain characteristic for precision designs.
What thermal and power considerations apply to MAX335ENG+?
The MAX335ENG+ is a through-hole analog switch, so its principal electrical loss is generally associated with on-resistance rather than semiconductor power dissipation. The manufacturer datasheet should be used to verify supply current, absolute maximum ratings, and temperature limits. Keep analog traces short, provide adequate ground return, and avoid using the switch resistance as an unintended precision attenuator in low-impedance sources.
Is MAX335ENG+ compliant with RoHS and halogen-free requirements?
The available component information identifies MAX335ENG+ as halogen-free compliant. Its RoHS status is not explicitly established in the product information used for this page, so the RoHS field remains unknown rather than inferred. For a released product, review the current manufacturer declaration and your procurement requirements, especially if the exact suffix will be used in a regulated or export-controlled assembly.
Where can I request a quote and current lead time for MAX335ENG+?
Use the Request a Quote form on this XAIPART page to request current pricing, stock confirmation, minimum order quantity, and lead time for MAX335ENG+. Lead time and availability can change with production schedules, package configuration, and order volume, so obtain a written response before committing the component to a build schedule. The form is the appropriate commercial channel for an exact-order quotation.

Справочные инженерные данные для MAX335ENG+ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose MAX335ENG+ when an existing design requires eight separately controlled, bidirectional SPST channels with a serial interface and a 24-pin PDIP footprint. It is especially useful for high-impedance data-acquisition, test-fixture, and industrial routing paths where 100 Ω typical series resistance will not materially reduce measurement accuracy. MAX335CNG+ is the closest documented alternative for the same package and channel architecture; select it after checking its exact temperature and lifecycle requirements. MAX335ENG and MAX335ENG-T are closely related ordering options, but suffix-specific packing and temperature characteristics must be confirmed. MAX335EWG-T may suit a different environmental grade while retaining the same core function. For low-impedance precision signals, choose an architecture with lower on-resistance rather than compensating for the MAX335ENG+ switch resistance with external amplification.

Сравнение с аналогами

Параметр Этот товар MAX335CNG+ MAX335ENG MAX335ENG-T MAX335EWG-T
Package 24-pin PDIP 24-pin PDIP 24-pin PDIP 24-pin PDIP 24-pin PDIP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Number of Switches 8 8 8 8 8
Switch Configuration 1:1 SPST 1:1 SPST 1:1 SPST 1:1 SPST 1:1 SPST
Control Interface Serial digital interface Serial digital interface Serial digital interface Serial digital interface Serial digital interface

Ключевые отличия

  • Eight independently controlled channels with a shared serial interface (против MAX335CNG+)
  • Bidirectional signal conduction (против MAX335EWG-T)
  • Documented 100 Ω typical on-resistance (против MAX335ENG)
  • Direct PCB reuse with established PDIP footprint (против MAX335CNG+)

Заметки по проектированию

Treat each closed channel as a series 100 Ω element, as stated in the manufacturer datasheet, and include it in the source, load, and ADC input calculation. For a 10 kΩ source impedance, the switch resistance changes the divider by approximately 1%, while a 100 Ω source makes the added resistance much more significant. Use short traces, a stable ground reference, and the complete frequency-response data when routing higher-bandwidth signals.

Place the MAX335ENG+ close to the signals being routed and keep the serial interface traces away from sensitive analog nodes. Provide a direct ground return beneath or adjacent to the device, avoid long shared paths between analog channels and digital control, and provide test points for clock, data, and control signals. Although the MAX335ENG+ uses a through-hole PDIP package, careful analog trace routing remains important because every closed switch contributes resistance and board parasitics.

Do not assume that all MAX335 ordering suffixes have identical temperature, packing, or lifecycle meanings. Confirm the MAX335ENG+ suffix against the manufacturer ordering guide before substituting MAX335ENG, MAX335ENG-T, MAX335CNG+, or MAX335EWG-T. Also verify the serial-interface timing and logic levels in firmware; changing an MPN suffix alone does not establish that every electrical condition is identical.

Decouple the device supply according to the manufacturer application guidance and keep switching currents away from analog returns. Although the eight switches are individually controlled, simultaneous state changes can produce transient current movement in connected loads and affect sensitive nodes. Add local bulk and high-frequency bypass capacitance, maintain a low-impedance supply path, and test worst-case switching sequences with the intended load attached.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Yes
Конфликтные минералы
Unknown

The component information identifies MAX335ENG+ as halogen-free compliant. No explicit RoHS, REACH, lead-free, or conflict-minerals declaration was established, so those fields remain unknown. AEC-Q100 qualification is not stated and is not applicable to the identified commercial analog switch.

Данные проверены: 2026-11-18 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MAX335ENG+ datasheet MAX335ENG+ pinout MAX335ENG+ datasheet pdf MAX335ENG+ package MAX335ENG+ equivalent MAX335ENG+ replacement MAX335ENG+ cross reference MAX335ENG+ vs MAX335CNG+ MAX335ENG+ price MAX335ENG+ stock Analog Devices MAX335ENG+ MAX335ENG+ schematic MAX335ENG+ application circuit MAX335 8-channel SPST switch

Связанные компоненты & термины

Analog Devices MAX335 MAX335ENG+ MAX335CNG+ MAX335ENG MAX335ENG-T MAX335EWG-T analog switch analog switch IC SPST switch serial-controlled switch interface IC semiconductor 24-pin PDIP PDIP package through-hole package on-resistance off-state leakage current bidirectional conduction data acquisition test and measurement industrial control signal routing Halogen Free
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ