Analog Devices

MAX336EPI+ - 16:1 Low-Leakage CMOS Multiplexer | Analog Devices

Артикул: MAX336EPI+ ✓ Активен
4.5 V to 30 V Vdss 400 ohm Rds(on) 28-pin PDIP Package
MOQ: 1 |

MAX336EPI+ Обзор

Analog Devices MAX336EPI+ is a 16-channel, single 16:1 CMOS analog multiplexer with 400 ohm on-resistance, low-leakage characteristics, and operation from 4.5 V to 30 V in a 28-pin PDIP package. It is designed for routing multiple analog signals through a shared circuit while limiting channel-selection errors, leakage, and signal distortion.

An analog multiplexer is an input-routing semiconductor that selects one of several analog inputs and connects it to a common output. The MAX336 belongs to the CMOS analog switch and multiplexer hierarchy within broader interface ICs. Its 16:1 configuration reduces the number of physical signal paths required in instrumentation, measurement, control, and data-acquisition systems where many sensor or test inputs must be scanned sequentially.

Key features include a single 16:1 configuration, 400 ohm on-resistance, low-leakage CMOS operation, and a 4.5 V to 30 V single-supply range. The MAX336 family also provides a dual 8-channel configuration option and is specified for low charge injection, with 3.5 pC typical. According to the Analog Devices product page, electrostatic-discharge protection exceeds 2000 V using method 3015.7, helping protect sensitive analog nodes during handling and system integration.

The MAX336 is implemented as a CMOS analog switch with controlled complementary addressing and break-before-make behavior expected of the MAX336/MAX337 family. Its low-leakage characteristic is particularly valuable when measuring high-impedance sources because off-channel leakage can create an error proportional to source impedance. The 400 ohm on-resistance must also be included in source-impedance and gain-error calculations, especially for instrumentation front ends with long sensor leads.

Typical uses include battery-cell monitoring, programmable instrumentation, industrial control, automated test equipment, data acquisition, and analog signal routing. The device can consolidate 16 measurement channels into one signal chain while the surrounding system applies an address and measures each selected input. It is also suitable where leakage, rather than switching speed, is the primary concern.

PCB design should keep the selected analog path short and place protection and filtering components near the relevant pins. Verify input levels, supply range, address timing, and off-channel leakage against the end-equipment accuracy budget. A PDIP package favors through-hole prototyping and repair but occupies more board area than surface-mount alternatives.

This product page combines manufacturer specifications, package information, sourcing guidance, application analysis, and honest replacement evaluation. It also highlights where pin-to-pin alternatives are technically credible, avoiding the inclusion of parts that require a different footprint or materially different switching architecture.

Аналоги без доработки для MAX336EPI+ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

MAX336EPI

✅ Прямая замена
📦 28-PDIP
On-resistance is listed as 400 ohm, while the exact ordering-code and temperature-grade differences are not specified in the available listings

📋 Справочный аналог (нет в каталоге)

MAX337EPI+

✅ Прямая замена
📦 28-PDIP
Uses the MAX337 dual 8-channel configuration rather than the MAX336 single 16:1 configuration; supply range remains 4.5 V to 30 V

📋 Справочный аналог (нет в каталоге)

MAX336EPI+ Характеристики

Product Type 16:1 CMOS analog multiplexer
Number of Channels 16 channels
Configuration Single 16:1
On-Resistance 400 ohm
Supply Voltage Range 4.5 V to 30 V
Dual-Supply Operation Plus or minus 4.5 V to plus or minus 20 V
Charge Injection 3.5 pC typical
ESD Protection Greater than 2000 V using method 3015.7
Multiplexer Family 16-channel or dual 8-channel configuration
Switch Type CMOS analog switch
Leakage Characteristic Low leakage
Корпус 28-pin PDIP
Тип монтажа Through-hole

Руководство по цоколевке MAX336EPI+ в корпусе 28-pin pdip

Цоколевка для MAX336EPI+ (корпус 28-pin pdip). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 28-pin pdip для MAX336EPI+

Нет подробных данных о распиновке для MAX336EPI+.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MAX336EPI+ подходит для 6 применениеs: Battery-Cell Monitoring, Programmable Test and Measurement, Industrial Process Sensing, Data-Acquisition Systems, Automated Test Equipment, Analog Signal Routing.

⚡

Battery-Cell Monitoring

The MAX336EPI+ is useful for scanning groups of battery-cell voltages through a common measurement path. Its single 16:1 organization can route 16 monitored inputs in a repeated sequence, reducing the number of analog input channels required in the measuring system. The 4.5 V to 30 V supply range supports equipment operating from multiple cell stacks, while the 400 ohm on-resistance must be included in the input-loading analysis. For high-impedance cell taps, the family's low-leakage characteristic helps prevent off-channel paths from corrupting measurements.

🔧

Programmable Test and Measurement

A programmable instrument can use the MAX336EPI+ to connect one of 16 external test points to a shared measurement chain. This arrangement supports repeatable channel selection without requiring 16 separate analog front ends. The 16:1 architecture reduces routing complexity, while the 400 ohm on-resistance should be combined with the source impedance of the device under test when calculating measurement accuracy. The low-leakage behavior is advantageous when switching between high-impedance sensors, probes, or precision networks.

🏭

Industrial Process Sensing

The MAX336EPI+ can scan pressure, temperature, level, or current-derived analog signals in an industrial control system. A single 16:1 multiplexer allows one controller ADC channel to service multiple sensors, lowering wiring and input-converter requirements. Its 4.5 V to 30 V operating range supports industrial supply conditions, while the family low-leakage characteristic helps preserve accuracy with resistive sensors. Engineers should verify common-mode limits, settling behavior, and channel-to-channel isolation for the process signals being selected.

📟

Data-Acquisition Systems

The MAX336EPI+ fits data-acquisition systems that must monitor many slowly changing analog inputs with a shared converter. Its single 16:1 configuration consolidates 16 channels into one routing stage, and the 400 ohm on-resistance can be incorporated into the input model used for gain and settling calculations. The low-leakage characteristic is particularly useful for high-impedance transducers, where leakage through an off channel can generate an error comparable to the signal being measured.

🖥️

Automated Test Equipment

The MAX336EPI+ can route test resources among a group of DUT pins in automated test equipment. A single 16:1 structure minimizes the number of external multiplexing components around one measurement amplifier or converter. The 28-pin PDIP package also simplifies through-hole prototyping and bench repair. Precision testing requires accounting for the 400 ohm switch resistance, the low-leakage behavior, and the manufacturer-defined switching and settling limits when calculating stimulus accuracy and measurement time.

🌐

Analog Signal Routing

The MAX336EPI+ can consolidate 16 low-frequency analog sources into one shared signal path for routing and monitoring. This is useful in laboratory equipment, control panels, and general-purpose analog switching systems where a physical multiplexer saves board space and wiring. Its CMOS implementation, low-leakage characteristics, and 400 ohm on-resistance provide a defined switching baseline, although the final design must satisfy signal-range, bandwidth, injection, and transition requirements in the manufacturer datasheet.

What is the MAX336EPI+?
The MAX336EPI+ is a single 16:1 CMOS analog multiplexer in a 28-pin PDIP package. According to the Analog Devices MAX336 product page, the MAX336 family also includes a dual 8-channel configuration, operates from 4.5 V to 30 V, and is designed for low-leakage analog-signal routing. The device accepts up to 16 input channels and connects a selected channel to the common analog path.
What is the on-resistance of MAX336EPI+?
The MAX336EPI+ has a rated on-resistance of 400 ohm. This value is important because it forms part of the effective source resistance seen by downstream circuitry. In a high-impedance measurement system, engineers should include the switch resistance when calculating divider ratios and settling behavior, while also verifying that 400 ohm remains acceptable for the required gain accuracy and signal bandwidth.
What is the supply voltage range of MAX336EPI+?
The MAX336EPI+ operates from a single supply of 4.5 V to 30 V. According to the Analog Devices MAX336 product information, the family can also operate from dual positive and negative supplies ranging from plus or minus 4.5 V to plus or minus 20 V. The chosen supply arrangement must support the signal range being switched and must remain within the limits stated in the manufacturer datasheet.
Where can I download the MAX336EPI+ datasheet PDF?
The official MAX336 datasheet and product information are available through Analog Devices at the MAX336 product page. The manufacturer page provides the authoritative electrical characteristics, ordering information, configuration details, and package information. Use the manufacturer document for final design decisions because reseller summaries may combine MAX336, MAX337, and package variants. The listed product page is the correct starting point for the MAX336EPI+ and its family.
Where can I find the MAX336EPI+ pinout?
The MAX336EPI+ pin assignment and package drawing are found in the pin-configuration section of the Analog Devices MAX336 datasheet. The component uses a 28-pin PDIP package, so PCB designers should compare pin numbers, control inputs, supply pins, common terminals, and the EP versus E suffix ordering information before laying out a replacement board. Do not infer an alternate footprint from distributor titles alone.
Is MAX336EPI+ suitable for high-impedance measurement systems?
Yes, the MAX336EPI+ is suitable for high-impedance measurement systems when its low-leakage characteristic and 400 ohm on-resistance are included in the error budget. Off-channel leakage can affect readings from high-impedance sensors because it introduces an unintended current path, while switch resistance changes the effective transfer function. The Analog Devices MAX336 page specifically identifies low leakage as a family feature for precision signal routing.
What is the difference between MAX336EPI+ and MAX337EPI+?
The MAX336EPI+ provides a single 16:1 multiplexing configuration, while the MAX337 is associated with the dual 8-channel configuration in the MAX336 family. Both support low-leakage CMOS multiplexing, a 4.5 V to 30 V single-supply range, and dual supplies from plus or minus 4.5 V to plus or minus 20 V. Selection should follow the required channel organization and exact manufacturer pin configuration rather than package size alone.
When should I choose MAX336EPI+ over a smaller-surface-mount multiplexer?
Choose MAX336EPI+ when a through-hole prototype, repair design, or 16-to-1 routing requirement is more important than minimum board area. Its 28-pin PDIP package supports accessible through-hole assembly and straightforward probing, while the 16-channel configuration reduces the number of separate analog routes needed. A compact production design may favor a surface-mount multiplexer, but changing package type requires a PCB redesign and a full pinout comparison.
What can replace MAX336EPI+?
A valid replacement must be pin-to-pin compatible and use the same 28-pin PDIP footprint, not merely have similar channel counts. The MAX336EPI and MAX337EPI+ are the closest candidates identified from family information, but each serves a different multiplexing configuration and must be checked against the required pin functions. Before substitution, compare addressing, common terminals, supply pins, signal limits, leakage, and switching behavior.
What is the best Analog Devices equivalent for MAX336EPI+?
The closest Analog Devices family-level equivalent is MAX337EPI+ when the circuit can use the MAX337 dual 8-channel organization and the manufacturer confirms the required pin compatibility. For an unchanged single 16:1 circuit, MAX336EPI remains the more direct option because it retains the same family and configuration. Use the MAX336 manufacturer documentation to verify ordering suffixes, electrical ratings, and PCB compatibility before release.
Where can I buy MAX336EPI+ online?
Use the Request a Quote form on this page to request availability, lead time, and a quotation for MAX336EPI+. The exact ordering code includes the MAX336EPI+ suffix, so confirm that the quoted component is the 28-pin PDIP configuration rather than MAX336EUI+, MAX336EAI+, or another package variant. The manufacturer lists the MAX336 family as production, but current channel availability should be confirmed through the quote process.
How much does MAX336EPI+ cost?
Current commercial pricing for MAX336EPI+ should be requested through the Request a Quote form on this page. The Analog Devices MAX336 page shows a starting family list price, but that figure is not an exact quantity-break quotation for this ordering code. Buyers should provide the required quantity, delivery location, and packaging requirements so the quotation reflects the MAX336EPI+ configuration rather than a family-level starting amount.
What is the lead time and stock status for MAX336EPI+?
Current stock and lead time for MAX336EPI+ are available through the Request a Quote form on this page. Analog Devices identifies the MAX336 family as production, but that lifecycle statement does not guarantee immediate inventory at a particular quantity. Include your required quantity and target date in the request, and verify that the response identifies the MAX336EPI+ 28-pin PDIP ordering code.
Does MAX336EPI+ support ESD protection?
Yes, the MAX336 family is specified with electrostatic-discharge protection greater than 2000 V using method 3015.7. The Analog Devices MAX336 product page identifies this improved protection characteristic for the family. ESD ratings support robust handling and integration, but they do not replace normal board-level grounding, surge protection, or design checks for the voltages present on external connector wiring.
What are the key specifications of MAX336EPI+ that engineers should know?
The principal MAX336EPI+ specifications are a single 16:1 configuration, 400 ohm on-resistance, 4.5 V to 30 V single-supply operation, dual supplies from plus or minus 4.5 V to plus or minus 20 V, and a 28-pin PDIP package. According to the Analog Devices MAX336 page, the family also provides low-leakage operation, 3.5 pC typical charge injection, and ESD protection greater than 2000 V using method 3015.7.

Справочные инженерные данные для MAX336EPI+ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose MAX336EPI+ when the design requires a single 16:1 low-leakage CMOS multiplexer in a 28-pin PDIP package. It is especially useful for prototyping or repairing systems that scan high-impedance analog inputs and need the family specifications of 400 ohm on-resistance, 4.5 V to 30 V single-supply operation, and greater-than-2000 V ESD protection. Choose MAX336EPI when the manufacturer ordering-code details confirm that it satisfies the exact electrical grade and suffix requirements while preserving the same footprint. Consider MAX337EPI+ only when the circuit can operate as a dual 8-channel multiplexer and its pin configuration matches the board. For a compact production PCB, a surface-mount family may be preferable, but that option requires a new layout and complete pinout, timing, leakage, and signal-range verification.

Сравнение с аналогами

Параметр Этот товар MAX336EPI MAX337EPI+
Brand Analog Devices Analog Devices Analog Devices
Package 28-PDIP 28-PDIP 28-PDIP
Multiplexer Configuration Single 16:1 Single 16:1 Dual 8:1
Number of Channels 16 channels 16 channels 16 channels arranged as dual 8:1
Single-Supply Voltage Range 4.5 V to 30 V 4.5 V to 30 V 4.5 V to 30 V
Dual-Supply Voltage Range Plus or minus 4.5 V to plus or minus 20 V Plus or minus 4.5 V to plus or minus 20 V Plus or minus 4.5 V to plus or minus 20 V
Charge Injection 3.5 pC typical for MAX336 family 3.5 pC typical for MAX336 family 3.5 pC typical for MAX336/MAX337 family
ESD Protection Greater than 2000 V using method 3015.7 Greater than 2000 V using method 3015.7 Greater than 2000 V using method 3015.7
Leakage Characteristic Low leakage Low leakage Low leakage
Mounting Type Through-hole Through-hole Through-hole

Ключевые отличия

  • Single 16:1 organization (против MAX337EPI+)
  • Defined 400 ohm on-resistance (против MAX337EPI+)
  • Wide single-supply operating range (против MAX336EPI)

Заметки по проектированию

Include the 400 ohm on-resistance in the complete source-impedance calculation rather than treating the selected channel as an ideal switch. For a resistive divider or amplifier input, the switch resistance changes the effective transfer ratio; for a capacitive input node, it also changes the available charging current. Add cable and source resistance to establish the worst-case settling time before selecting the acquisition rate.

Do not substitute MAX336, MAX337, and package variants solely because their channel counts look similar. MAX336EPI+ is the single 16:1 configuration in a 28-pin PDIP package, whereas MAX337EPI+ uses the dual 8-channel organization. Confirm address inputs, common terminals, supply connections, package drawing, and signal limits against the manufacturer pin configuration before approving a replacement.

Keep the selected analog route short and place channel-specific filtering or protection close to the associated pins. Provide a low-impedance ground and bypass the supply pins with the capacitance recommended by the manufacturer. For high-impedance sources, use guarding and clean PCB surfaces to minimize leakage from contamination and adjacent traces; the device's low-leakage specification cannot overcome leakage introduced by the board or connectors.

Route multiplexer control signals away from sensitive analog inputs and use a solid ground-plane strategy. Charge injection of 3.5 pC typical can create a transient when the address changes, so acquisition systems should blank or discard samples during transitions. If the multiplexed signal is low frequency and high impedance, include the charge-injection transient in the front-end settling and error analysis.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The supplied product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The MAX336 is an industrial analog interface IC, so AEC-Q100 qualification is not applicable.

Данные проверены: 2026-11-14 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MAX336EPI+ datasheet MAX336EPI+ pinout MAX336EPI+ datasheet pdf MAX336EPI+ equivalent MAX336EPI+ replacement MAX336EPI+ cross reference MAX336EPI+ price MAX336EPI+ stock Analog Devices MAX336EPI+ MAX336EPI+ 16:1 multiplexer MAX336EPI+ 28-PDIP MAX336EPI+ vs MAX337EPI+

Связанные компоненты & термины

Analog Devices Maxim Integrated MAX336EPI+ MAX336EPI MAX337EPI+ analog multiplexer CMOS analog switch analog switch IC 16:1 multiplexer dual 8-channel multiplexer interface IC semiconductor low leakage on-resistance charge injection electrostatic-discharge protection 28-pin PDIP PDIP package through-hole mounting 4.5 V to 30 V power supply battery-cell monitoring data acquisition industrial process sensing automated test equipment
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ