Analog Devices

MAX364ESE+ - 85Ω Quad SPST Analog Switch | Analog Devices

Артикул: MAX364ESE+ ✓ Активен
85 ohm Rds(on) 16-pin narrow SOIC Package
MOQ: 1 |

MAX364ESE+ Обзор

Analog Devices MAX364ESE+ is a precision, quad, single-pole single-throw analog switch with four normally closed channels, a maximum on-resistance of 85Ω, and a 16-pin narrow SOIC package. The device supports 1:1 signal routing and is designed for precision analog systems where channel resistance matching, low leakage, and consistent off-state isolation are important.

An analog switch is an electronic routing component that connects or disconnects analog signals under digital control. A SPST switch provides one conducting path, while the MAX364's normally closed configuration connects each signal path when its control input is inactive. Within the broader semiconductor hierarchy, this device is an analog switch, then a switch IC and interface IC. It is intended to bridge low-frequency or precision analog signals without using a mechanical relay.

The MAX364 provides four independent normally closed channels, low on-resistance below 85Ω, on-resistance matching within 2Ω between channels, and on-resistance variation of no more than 9Ω across the analog signal range. These characteristics help limit insertion-error differences between channels. The equalized resistance also supports reproducible measurements when several switched nodes participate in the same precision measurement path.

Each MAX364/MAX365 family member uses the same precision switch architecture, but the MAX364 has four normally closed switches while the MAX365 has four normally open switches. The MAX364ESE+ suffix identifies the narrow 16-SOIC configuration. Its four control inputs allow independent routing of four analog nodes, making it practical for scanning, signal isolation, sample-and-hold interfaces, and programmable test systems.

Typical applications include precision multimeter input switching, automated test equipment, data-acquisition systems, instrumentation signal routing, and analog measurement front ends. In each case, the normally closed state can preserve signal continuity during reset or control-signal absence. The matched low on-resistance also reduces channel-dependent errors when the same source drives different measurement paths.

For layout, route high-impedance signals directly to the switch pins and keep the analog traces short and away from fast digital or switching nodes. Check the control-logic levels and supply conditions in the manufacturer datasheet before designing the driver. Treat the 85Ω on-resistance as part of the complete source impedance rather than as an isolated component value, because series source resistance and switch resistance combine to determine signal attenuation.

Аналоги без доработки для MAX364ESE+ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

MAX364CSE+

✅ Прямая замена
📦 16-pin narrow SOIC
Same quad normally closed SPST architecture and 16-pin SOIC footprint; ordering-code temperature-grade differences require confirmation

📋 Справочный аналог (нет в каталоге)

MAX364ESE+ Максимальные параметры и электрические характеристики

Number of Switches 4 circuits
Switch Configuration 1:1
Switch Type Quad SPST
Default State Normally closed (NC)
Maximum On-Resistance 85 ohm
On-Resistance Matching Between Channels Within 2 ohm
Maximum On-Resistance Variation 9 ohm over the analog signal range
Корпус 16-pin narrow SOIC
Тип монтажа Surface mount
Число выводов 16 pins
Control Inputs 4 control inputs

Руководство по цоколевке MAX364ESE+ в корпусе 16-pin narrow soic

Цоколевка для MAX364ESE+ (корпус 16-pin narrow soic). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 16-pin narrow soic для MAX364ESE+

Нет подробных данных о распиновке для MAX364ESE+.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MAX364ESE+ подходит для 6 применениеs: Precision Multimeter Input Switching, Automated Test Equipment Signal Routing, Data Acquisition Channel Isolation, Instrument Signal Routing, Programmable Sensor Interface, Analog Loopback and Diagnostic Circuits.

🔧

Precision Multimeter Input Switching

The MAX364ESE+ fits precision multimeter input routing because its four normally closed channels provide less than 85Ω on-resistance, matching within 2Ω between channels, and no more than 9Ω variation across the analog signal range. Each channel can connect a measurement source to the meter input, while the NC state preserves continuity when the control signal is inactive. Keeping channel resistance differences small helps reduce measurement gain error. The complete error budget should also include switch leakage, source impedance, ADC or meter input impedance, and settling time.

🏭

Automated Test Equipment Signal Routing

The MAX364ESE+ is suitable for automated test equipment that routes several low-frequency or precision analog nodes through a compact, controlled interface. Four independent SPST paths reduce the number of separate relay or switch assemblies, while matching within 2Ω helps maintain similar signal attenuation across test channels. The 85Ω maximum must be included in the impedance budget for high-impedance sources. Place the device close to the tester interface and use short analog routing to minimize additional parasitic capacitance.

📊

Data Acquisition Channel Isolation

The MAX364ESE+ can isolate four channels in a data-acquisition front end while maintaining normally closed signal paths. Its specified channel matching within 2Ω and resistance variation of no more than 9Ω reduce channel-dependent errors when the same source is sampled through different routes. The 85Ω on-resistance contributes to source impedance and may interact with the acquisition converter's acquisition time. Verify settling requirements, input leakage, and the complete signal range against the manufacturer datasheet before selecting capacitor and sampling parameters.

⚡

Instrument Signal Routing

The MAX364ESE+ provides a compact way to route four precision analog signals within laboratory and industrial instrumentation. The normally closed configuration allows a selected path to remain connected until the corresponding control input overrides it. Consistent on-resistance below 85Ω helps maintain predictable attenuation, while the 2Ω channel matching supports repeatable comparisons between measurement paths. High-impedance nodes should be routed with short traces, guarded where appropriate, and kept away from switching or digital timing signals.

🧩

Programmable Sensor Interface

The MAX364ESE+ can connect or disconnect sensor lines in a programmable analog interface when low-frequency operation and a 16-pin surface-mount footprint are suitable. Its normally closed paths provide continuity during reset, while four control inputs allow individual sensor channels to be selected. The switch's maximum 85Ω on-resistance must be checked against sensor loading, transducer impedance, and downstream amplifier biasing. For source impedances much greater than 85Ω, the switch may contribute little error; for lower-impedance nodes, its resistance should be included directly.

🔧

Analog Loopback and Diagnostic Circuits

The MAX364ESE+ is useful in analog loopback and diagnostic circuitry because four independent channels can form or interrupt test paths under digital control. Matched on-resistance within 2Ω helps compare channel paths, and the flatness limit of 9Ω reduces resistance-driven variation over the specified analog signal range. The normally closed topology can support fail-safe continuity paths when the controller is inactive. Confirm control polarity, inactive-state voltage, and maximum switch voltage using the MAX364 manufacturer datasheet before implementing diagnostic loops.

What is the MAX364ESE+?
The MAX364ESE+ is a precision, quad, normally closed SPST analog switch from Analog Devices with four independently controlled channels and a maximum on-resistance of 85Ω. It is packaged in a 16-pin narrow SOIC. According to the Analog Devices MAX364 manufacturer datasheet, the four channels have on-resistance matching within 2Ω and remain flat within 9Ω across the analog signal range, making the device suitable for precision signal-routing and measurement systems.
What is the difference between MAX364 and MAX365?
The MAX364 has four normally closed switches, while the MAX365 has four normally open switches. Both families provide low on-resistance below 85Ω, channel matching within 2Ω, and on-resistance variation of no more than 9Ω across the analog signal range. According to the Analog Devices MAX364 manufacturer datasheet, the difference is the default mechanical state of the switched paths; confirm that normally closed behavior is required before using the MAX364 as a drop-in substitute for the MAX365.
Where can I download the MAX364ESE+ datasheet PDF?
The MAX364 manufacturer datasheet and product information are available from Analog Devices at https://www.analog.com/en/products/MAX364.html. The datasheet is the authoritative source for the complete pin configuration, control logic, supply limits, leakage current, off-state isolation, switching timing, and operating-temperature limits. Use its pin-description table when assigning PCB nets, especially because the MAX364ESE+ is a 16-pin narrow SOIC device.
Where can I find the MAX364ESE+ pinout?
Use the pin-description table in the MAX364 manufacturer datasheet to locate the MAX364ESE+ pinout. The exact public pin-number-to-signal assignment is not reproduced on this product page. The device uses four control inputs and four normally closed analog channels in a 16-pin narrow SOIC package, but engineers should not infer individual pin numbers from the functional description alone.
What are the key specifications of MAX364ESE+ that engineers should know?
The MAX364ESE+ provides four normally closed 1:1 SPST channels, less than 85Ω on-resistance, channel-to-channel matching within 2Ω, and no more than 9Ω resistance variation over the analog signal range. According to the Analog Devices MAX364 manufacturer datasheet, these resistance characteristics are the central precision specifications. The device also uses a 16-pin narrow SOIC package and four independent control inputs.
Is MAX364ESE+ suitable for precision test equipment?
The MAX364ESE+ is suitable for precision test equipment because its four channels have matched on-resistance within 2Ω and resistance variation of no more than 9Ω across the analog signal range. According to the Analog Devices MAX364 manufacturer datasheet, this matching limits differences caused by routing the same source through different switch channels. Its normally closed paths also maintain connectivity when control signals are inactive.
What can replace the MAX364ESE+?
A direct replacement must use four normally closed SPST channels, a 16-pin narrow SOIC footprint, and comparable on-resistance and leakage performance. MAX364CSE+ is the closest same-package part identified in the MAX364 family, while MAX365ESE+ changes the default state from normally closed to normally open and is therefore not a functional drop-in replacement. Request a quote for the exact MPN and package required through the Request a Quote form on this page.
Is MAX364ESE+ the same as MAX365ESE+?
No. The MAX364ESE+ has four normally closed switches, whereas the MAX365ESE+ has four normally open switches. Both are precision quad SPST devices with on-resistance below 85Ω, but their default signal paths are electrically different. According to the Analog Devices MAX364 manufacturer datasheet, replacing one with the other changes whether a path is connected before its control signal is asserted.
When should I choose MAX364ESE+ over MAX364CSE+?
Choose the MAX364ESE+ when the required component ordering configuration specifically calls for MAX364ESE+, while MAX364CSE+ is used only when its manufacturer ordering codes, temperature grade, and qualification details have been confirmed as acceptable. Both belong to the same MAX364 family and provide four normally closed SPST channels, so package function is closely related. The exact ordering-code differences must be checked in the manufacturer datasheet before substitution.
Is MAX364ESE+ suitable for data-acquisition systems?
The MAX364ESE+ is suitable for data-acquisition systems that require four independently routed, normally closed analog channels with consistent on-resistance. According to the Analog Devices MAX364 manufacturer datasheet, on-resistance matching within 2Ω helps reduce channel-dependent gain error, while the 85Ω maximum provides a defined upper limit for source-impedance calculations. Include the switch resistance, source impedance, ADC input impedance, and settling requirements in the complete signal-path design.
Where can I buy MAX364ESE+ online?
Use the Request a Quote form on this page to request availability, order quantity, and packaging for MAX364ESE+. The manufacturer part number and 16-pin narrow SOIC configuration are the key identifiers for a valid quotation. Current stock and delivery schedules should be confirmed through that form rather than inferred from an obsolete catalog listing.
What is the price of MAX364ESE+?
The Request a Quote form on this page provides the current commercial answer for MAX364ESE+, including quantity pricing and availability. Pricing is not embedded in this technical description because it can change with order quantity, lifecycle status, and packaging. Provide the exact MAX364ESE+ MPN and required quantity when submitting the request.
What is the lead time for MAX364ESE+?
Request the current lead time through the Request a Quote form on this page. Lead time can depend on manufacturer inventory, order quantity, and the requested shipping configuration, so it should be confirmed for the exact MAX364ESE+ order. The technical designation is Analog Devices MAX364ESE+ in a 16-pin narrow SOIC package.
Is MAX364ESE+ in stock?
Current MAX364ESE+ stock status should be confirmed through the Request a Quote form on this page. The product uses the exact Analog Devices ordering code MAX364ESE+ and a 16-pin narrow SOIC footprint. Because inventory can change independently of technical documentation, use the quotation response for a quantity-specific availability commitment.
What is the best Analog Devices equivalent for MAX364ESE+?
The closest Analog Devices family candidate is MAX364CSE+, which retains the four normally closed SPST switch architecture and narrow 16-pin SOIC format. According to the Analog Devices MAX364 manufacturer datasheet, the family is specified around low on-resistance below 85Ω, matching within 2Ω, and flatness within 9Ω. Confirm the temperature and ordering-code differences before accepting it as a production replacement.

Справочные инженерные данные для MAX364ESE+ — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose MAX364ESE+ when the design requires four independently controlled, normally closed analog paths in a 16-pin narrow SOIC and can operate within the MAX364 family's electrical limits. Its sub-85Ω on-resistance, matching within 2Ω, and variation within 9Ω are valuable when channel-to-channel consistency affects measurement accuracy. MAX364CSE+ is the closest same-package family candidate, but its ordering-code and temperature-grade differences require confirmation before substitution. MAX365ESE+ is not a direct replacement because its channels are normally open. The MAX364ESE+ is also less appropriate when the 85Ω resistance is excessive for the signal path, when very high leakage performance is required, or when a mechanical relay provides more suitable voltage, current, or isolation ratings.

Сравнение с аналогами

Параметр Этот товар MAX364CSE+
Package 16-pin narrow SOIC 16-pin narrow SOIC
Brand Analog Devices Analog Devices
Number of Switches 4 circuits 4 circuits
Switch Type Quad SPST Quad SPST
Default State Normally closed Normally closed
Maximum On-Resistance 85 ohm 85 ohm
On-Resistance Matching Within 2 ohm Within 2 ohm
On-Resistance Variation 9 ohm maximum 9 ohm maximum

Ключевые отличия

  • Four matched normally closed channels (против MAX364CSE+)
  • Defined precision resistance characteristics (против MAX365ESE+)
  • Compact four-channel integration (против Mechanical relay alternatives)

Заметки по проектированию

Include the maximum 85Ω on-resistance in the complete source-impedance calculation. For a voltage divider formed by the source impedance and the receiving input, use the actual switch resistance rather than assuming an ideal connection. This is especially important when the receiving circuit has high input impedance, because leakage and parasitic capacitance can then dominate errors that are not visible from resistance matching alone.

Route each analog path directly to its MAX364ESE+ pin and avoid sharing narrow segments between channels that need independent measurements. Keep the 16-pin SOIC away from clock, pulse, and high-current switching traces. For high-impedance nodes, use guarded spacing where practical and minimize exposed PCB area; otherwise leakage and surface contamination can exceed the useful precision of the matched on-resistance characteristic.

Do not treat MAX365ESE+ as a direct substitute because it uses normally open switches rather than the MAX364ESE+'s normally closed paths. Also verify the control polarity, inactive control-state voltage, and absolute maximum analog voltage before connecting external circuitry. A valid drop-in replacement must preserve the 16-pin SOIC footprint, four-channel NC behavior, and the relevant electrical limits.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The '+' ordering suffix commonly denotes a lead-free finish, but the exact RoHS, REACH, halogen-free, and conflict-minerals status was not established from the listed technical sources.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MAX364ESE+ datasheet MAX364ESE+ pinout MAX364ESE+ datasheet pdf MAX364ESE+ 16 pin SOIC MAX364ESE+ equivalent MAX364ESE+ replacement MAX364ESE+ cross reference MAX364ESE+ vs MAX365ESE+ MAX364ESE+ price MAX364ESE+ stock Analog Devices MAX364ESE+ 85 ohm quad SPST switch MAX364ESE+ precision analog switch MAX364ESE+ application circuit MAX364ESE+ footprint

Связанные компоненты & термины

Analog Devices MAX364ESE+ MAX364CSE+ MAX365ESE+ precision analog switch SPST switch normally closed switch analog switch IC interface IC semiconductor on-resistance channel matching low leakage 16-pin narrow SOIC SOIC family surface-mount package SMD data-acquisition system automated test equipment precision multimeter signal routing off-state isolation channel-to-channel crosstalk
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ