onsemi

MC33179PG - 5 MHz Quad Low-Power Op Amp | onsemi

Артикул: MC33179PG ✓ Активен
2 V to 18 V Vdss 14-PDIP, 0.300 in (7.62 mm) pitch Package
MOQ: 1 |

MC33179PG Обзор

The onsemi MC33179PG is a quad, general-purpose operational amplifier designed for low-power audio and data-signal processing, with four amplifiers in a 14-pin DIP package. Its headline characteristics are a 5 MHz gain-bandwidth product, a 2 V to 18 V supply-voltage range, and a 14-PDIP through-hole package. The device is specified for industrial-temperature operation and combines bipolar input stages with a low-noise, low-power design intended for audio preamplification, active filtering, instrumentation, and general analog signal conditioning.

An operational amplifier is an analog building block that uses high open-loop gain and negative feedback to amplify the difference between two input voltages. The MC33179PG belongs to the operational-amplifier hierarchy, where a general-purpose quad amplifier provides four independent amplifiers in one package. Placing four amplifiers in a single 14-pin DIP reduces component count and simplifies PCB assembly in designs that require several matched signal-conditioning channels.

Key features include a 5 MHz gain-bandwidth product, a 2 V to 18 V operating supply range, and low-noise bipolar input characteristics. The quad configuration permits four independent amplifier sections with a shared positive and negative supply. This makes the MC33179PG appropriate for audio mixer stages, active low-pass and band-pass filters, sensor-conditioning circuits, and small-signal buffers. Its through-hole package also remains convenient for prototypes, educational designs, repair work, and manually assembled industrial control boards.

The MC33179 family uses high-frequency PNP input transistors to obtain a combination of low noise and improved transient response compared with conventional bipolar amplifier inputs. This architecture is useful when a design must recover small signals cleanly while remaining within a modest power budget. Because the amplifiers share package leads for supply voltage, the board layout should treat the power pins as high-current nodes and provide a low-impedance return path to the decoupling capacitors.

Typical applications include four-channel audio preamplification, active crossover and equalization networks, instrumentation amplifiers built from discrete sections, sensor signal conditioning, and general-purpose industrial control interfaces. The 14-pin DIP footprint is especially useful where through-hole assembly is preferred over fine-pitch surface-mount assembly. Designers should verify noise, offset, bias-current, output-swing, and stability requirements against the actual signal amplitude and source impedance.

When laying out the MC33179PG, place the supply bypass capacitor close to pins 4 and 11 and route the ground return directly to the device ground pin. Keep feedback-loop components compact to minimize parasitic capacitance and oscillation risk, especially when the closed-loop gain is high. Decouple each signal source locally where practical so that input and output currents do not share long current paths on the board.

This page consolidates the MC33179PG electrical identity, verified package and sourcing details, drop-in replacement analysis, and practical analog-layout guidance. It is intended to help engineers move quickly from device selection to schematic capture, PCB layout, and legacy-board redesign while remaining mindful of the part's through-hole package and amplifier-level trade-offs.

Аналоги без доработки для MC33179PG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MC33179PG (тот же форм-фактор и посадочное место) — отличается по Number of Pins, Package.

onsemi
Number of Pins: 8 pins
Package: 8-pin PDIP
Сравнить с MC33179PG →

MC33178PG

✅ Прямая замена
onsemi
📦 14-PDIP (0.300", 7.62mm)
2 amplifiers · Dual operational amplifier · 2 V to 18 V · 5 MHz · Bipolar · High-frequency PNP · 8-pin PDIP · 8 pins

Уточнить цену

Открыть даташит →

TL054CN

✅ Прямая замена
📦 14-PDIP (0.300", 7.62mm)
Pin-compatible 14-pin DIP quad amplifier, but input bias current is 200 pA versus 100 nA for the MC33179PG and slew rate is 1.3 V/us versus 2 V/us; noise and bias requirements differ.

📋 Справочный аналог (нет в каталоге)

MC33179PG Максимальные параметры и электрические характеристики

Amplifier Type Quad general-purpose operational amplifier
Number of Amplifier Channels 4 channels
Gain-Bandwidth Product 5 MHz
Supply Voltage Range 2 V to 18 V
Корпус 14-PDIP, 0.300 in (7.62 mm) pitch
Тип монтажа Through-hole
Input Transistor Technology Bipolar with high-frequency PNP input transistors
Operating Temperature Class Industrial temperature range
Количество выводов 14 pins
Статус жизненного цикла Active product listing

Конфигурация выводов MC33179PG

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
Контакт 1 OUTA — Amplifier A output
Контакт 2 -INA — Amplifier A inverting input
Контакт 3 +INA — Amplifier A non-inverting input
Контакт 4 V- — Negative supply voltage
Контакт 5 +INB — Amplifier B non-inverting input
Контакт 6 -INB — Amplifier B inverting input
Контакт 7 OUTB — Amplifier B output
Контакт 8 OUTC — Amplifier C output
Контакт 9 -INC — Amplifier C inverting input
Контакт 10 +INC — Amplifier C non-inverting input
Контакт 11 V+ — Positive supply voltage
Контакт 12 +IND — Amplifier D non-inverting input
Контакт 13 -IND — Amplifier D inverting input
Контакт 14 OUTD — Amplifier D output

Типичное применение

MC33179PG подходит для 6 применениеs: Four-Channel Audio Preamplification, Active Audio Equalization and Crossover Filters, Industrial Sensor Signal Conditioning, Active Notch and Band-Pass Filtering, Control-Signal Buffering and Level Shifting, Audio Equipment Repair and Legacy Retrofit.

🎧

Four-Channel Audio Preamplification

The MC33179PG fits four-channel audio preamplification because it places four independent bipolar amplifiers in one 14-PDIP package while providing a 5 MHz gain-bandwidth product. Each channel can amplify a low-level source before a volume control, mixer, or line-level stage. The shared 2 V to 18 V supply simplifies power distribution, although each amplifier still requires local input and feedback components. For low-impedance microphone or instrument sources, check the input bias current in the manufacturer datasheet against the source impedance, because high source resistance can shift the DC operating point. Keep input traces short and place the supply bypass capacitor close to pins 4 and 11.

🎚️

Active Audio Equalization and Crossover Filters

The MC33179PG is well suited to active equalization and crossover networks that require several filtered amplifier channels in one board. Its 5 MHz gain-bandwidth product provides useful loop gain for moderate-frequency audio filters, while four independent sections allow stereo low-pass and high-pass stages to share a package. Use the manufacturer application circuits as the starting point for stable feedback arrangements, especially where Q factor and phase margin are critical. Component tolerances determine the actual filter response, so evaluate R and C networks with their actual tolerances. Keep each filter's input node away from the shared supply pins to minimize channel-to-channel crosstalk.

🏭

Industrial Sensor Signal Conditioning

The MC33179PG can condition four low-level industrial sensor signals when the system needs local amplification before an analog-to-digital converter. Its industrial-temperature rating and 2 V to 18 V supply range fit many 5 V, 12 V, and 15 V control rails. Each channel can buffer a transducer or amplify a bridge-derived voltage, then drive a short trace into the next conversion stage. Verify common-mode input range and output swing for the selected supply because those values are not interchangeable with gain-bandwidth. For high-impedance sensors, examine bias-current-induced offset, and use a dedicated low-noise reference at the ADC rather than treating the op amp as a precision voltage reference.

🌐

Active Notch and Band-Pass Filtering

The MC33179PG supports active notch, band-pass, and frequency-selective stages where four independent channels reduce the number of packages needed. The device's 5 MHz gain-bandwidth product is well above the center frequencies of many audio, communications, and measurement filters, allowing meaningful closed-loop gain while preserving stability margins. Select resistor and capacitor networks using the manufacturer's application guidance, then check stability with source and load impedances that match the finished circuit. Place the four amplifier sections so their feedback loops do not surround shared supply or ground paths, because long loops can pick up noise and create unintended coupling.

🔧

Control-Signal Buffering and Level Shifting

The MC33179PG can buffer four low-current control signals or provide limited level shifting between compatible analog stages in an industrial controller. The quad topology allows outputs to drive successive circuit blocks without repeating a package for every channel, and the 2 V to 18 V supply range supports common control-rail choices. Verify the output swing, output-current capability, and input common-mode range before assigning the amplifier to a relay-control or actuator-interface stage. Keep the buffer inputs close to their source components and give each output a defined return path. Decouple the shared supply pins once at the package, and route output currents away from the sensitive input-reference ground.

🛠️

Audio Equipment Repair and Legacy Retrofit

The MC33179PG's 14-PDIP through-hole package is useful for repairing or modernizing legacy audio and control equipment that uses discrete or obsolete quad amplifier stages. A DIP outline is straightforward to install on a repair board with a conventional through-hole footprint and allows individual socketed or soldered replacement. Before substituting it into vintage equipment, compare the original amplifier's gain-bandwidth, noise voltage, input bias current, output swing, and supply pins against the MC33179PG datasheet. Retrofitting a PCB that uses a surface-mount footprint would require an adapter and is not a direct footprint replacement.

What is the MC33179PG?
The MC33179PG is a four-channel, general-purpose bipolar operational amplifier from onsemi, intended for low-power audio and data-signal processing. It combines four amplifiers, a 5 MHz gain-bandwidth product, and a 2 V to 18 V supply range in one 14-PDIP package. According to the MC33179PG manufacturer datasheet, the device is designed for industrial-temperature applications where a through-hole quad amplifier is more convenient than a surface-mount equivalent.
Where can I download the MC33179PG datasheet PDF?
The MC33179PG datasheet is available from the onsemi document identified as the Low Power, Low Noise Operational Amplifiers datasheet. A manufacturer-hosted PDF can also be reached through the onsemi product documentation. Use the pin-description table and typical-application circuits in that document when assigning the 14 package leads, checking common-mode range, and selecting external compensation or stabilization components.
What is the pinout of the MC33179PG?
The MC33179PG uses a standard 14-pin DIP quad-amplifier arrangement: pins 1, 7, 8, and 14 are outputs; pins 2, 6, 9, and 13 are inverting inputs; pins 3, 5, 10, and 12 are non-inverting inputs; pin 4 is the negative supply; and pin 11 is the positive supply. Confirm lead numbering against the manufacturer pin-description table before laying out a replacement board.
What are the key specifications of MC33179PG that engineers should know?
The essential MC33179PG specifications are four amplifier channels, a 5 MHz gain-bandwidth product, a 2 V to 18 V supply range, and a 14-PDIP package. The onsemi datasheet describes the family as low-power, low-noise operational amplifiers using bipolar technology and high-frequency PNP input transistors. Additional numerical limits for bias current, offset voltage, noise density, slew rate, and output swing should be read from the relevant datasheet tables.
What is the MC33179PG used for in audio circuits?
The MC33179PG is suitable for four-channel audio preamplification, low-level mixing, active equalization, and crossover filtering because it provides four amplifiers in one 14-pin package. Its bipolar low-noise architecture supports small-signal audio work, while the 5 MHz gain-bandwidth product offers more bandwidth than many low-power general-purpose amplifiers. Use the manufacturer application circuits to establish stable feedback networks around each channel.
What is the difference between MC33179PG and MC33178PG?
The MC33179PG is the higher-bandwidth member of the closely related MC33178/MC33179 quad-amplifier family, with a stated gain-bandwidth product of 5 MHz. MC33178PG is an onsemi 14-PDIP alternative listed in a direct product comparison, but its key parameters and noise characteristics must be checked in its own datasheet. Treat the choice as a functional engineering decision based on bandwidth, noise, offset, and supply requirements rather than only package compatibility.
Is the TL054CN a drop-in replacement for the MC33179PG?
The TL054CN can be used as a functional alternative in many general-purpose amplifier circuits, but it is not an unconditional electrical drop-in for the MC33179PG. The published comparison identifies input bias current of 100 nA for the MC33179PG versus 200 pA for the TL054CN and slew rate of 2 V/us versus 1.3 V/us. Both devices use a 14-pin DIP arrangement, but feedback values, noise expectations, and stability should be revalidated before substitution.
What is the best drop-in replacement for MC33179PG?
The closest documented same-package option is onsemi MC33178PG, which appears in a direct comparison of the MC33178 and MC33179 families and uses the same 14-PDIP format. It is the practical first candidate for a redesign because it keeps the amplifier count, package outline, and through-hole assembly method. Verify bandwidth, offset voltage, bias current, slew rate, and rail-to-rail behavior against the system requirements before releasing the PCB.
When should I choose MC33179PG instead of TL054CN?
Choose the MC33179PG when the circuit requires more amplifier bandwidth, lower input bias current, or faster transient response than the TL054CN provides. The documented comparison gives the MC33179PG a 5 MHz gain-bandwidth product, 100 nA input bias current, and 2 V/us slew rate, while the TL054CN is associated with 1.3 V/us slew rate and much lower bias current. The choice therefore depends on whether source impedance and signal speed outweigh the TL054CN's lower input bias current.
Can the MC33179PG replace four separate single operational amplifiers?
Yes, the MC33179PG can replace four single amplifiers when each section has compatible supply, input, output, and stability requirements, and the PCB can accept a 14-pin DIP. The quad package reduces placement area and assembly cost compared with four separate packages. It does not, however, allow the channels to be omitted selectively; all four sections share the same package power pins and must still be connected properly.
Where can I buy MC33179PG online?
Use the Request a Quote form on this page to request MC33179PG pricing, current inventory, and a delivery commitment for the onsemi 14-PDIP device. Multiple authorized-channel listings are associated with this exact MPN, so a quotation can be matched to the required quantity and package suffix. Confirm that any offered part number ends in PG and specifies the same 14-pin DIP configuration before releasing a purchase order.
What is the price of MC33179PG?
The current MC33179PG price depends on order quantity, inventory, and shipment timing, so submit the Request a Quote form on this page for a binding commercial offer. The same form can request volume-break pricing, scheduled delivery, and stock confirmation for the onsemi MC33179PG. Compare the quoted part number, package, and operating-temperature grade against the original design requirement before ordering.
What is the lead time and stock status for MC33179PG?
A listing associated with MC33179PG reports 7,456 pieces in stock, but that inventory is time-sensitive and may not reflect current availability. Request the current lead time and allocation through the Request a Quote form on this page. Include your required quantity, annual usage, and target delivery date so the supplier can confirm allocation for the onsemi MC33179PG in its 14-PDIP package.
How should decoupling and grounding be handled for the MC33179PG?
Place the supply bypass capacitor as close as practical to pins 4 and 11, and provide a short, low-impedance ground return from pin 4 to the capacitor ground terminal. The positive and negative supply leads serve all four amplifier sections, so long or shared supply traces can couple noise between channels. Keep feedback components compact, route input and output traces separately, and avoid routing sensitive input signals beside the supply pins.
Is MC33179PG suitable for industrial control and sensor interfaces?
The MC33179PG is suitable for many industrial-control and sensor-interface tasks because it provides four general-purpose amplifiers, a 2 V to 18 V supply range, and an industrial-temperature rating. Its through-hole package supports repairable and manually assembled control boards. Check input bias current against the sensor source impedance, confirm output swing at the selected supply voltage, and verify noise and stability with the actual source and feedback network.

Справочные инженерные данные для MC33179PG — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the MC33179PG for four-channel low-level signal amplification when a 14-pin through-hole package, 5 MHz gain-bandwidth product, and low-power bipolar architecture are required. It is particularly attractive for audio preamplification, active filtering, and industrial control boards assembled with through-hole components. MC33178PG is the logical same-family alternative when its lower bandwidth remains acceptable and maintaining the onsemi device family simplifies qualification. TL054CN can fit the same DIP outline, but its 1 MHz bandwidth, 1.3 V/us slew rate, and substantially lower 200 pA input bias current create different error and transient behavior. For high-impedance sources, the TL054CN's lower bias current may be advantageous; for wider-band filtering and faster settling, the MC33179PG is usually preferable. In either case, confirm common-mode range, output swing, noise, offset, and stability from the selected device's datasheet before releasing a design.

Сравнение с аналогами

Параметр Этот товар MC33178PG TL054CN
Brand onsemi onsemi Texas Instruments
Package 14-PDIP (0.300", 7.62mm) 14-PDIP (0.300", 7.62mm) - same 14-PDIP (0.300", 7.62mm) - same
Amplifier Channels 4 circuits 4 circuits 4 circuits
Mounting Type Through-hole Through-hole Through-hole

Ключевые отличия

  • Higher bandwidth than the TL054CN alternative (против TL054CN)
  • Faster transient response (против TL054CN)
  • Four independent amplifiers in a through-hole package (против MC33178PG)

Заметки по проектированию

Place the supply bypass capacitor immediately adjacent to pins 4 and 11, with its ground terminal returning directly to the pin 4 ground path. Because all four amplifier sections share the same package supply leads, a long supply trace can couple output-current disturbances into the other channels. Keep each amplifier's feedback components close to its pins and route input nodes away from pins 11 and 12.

Do not treat a same-package amplifier as electrically identical to the MC33179PG. The MC33179PG has a stated input bias current of 100 nA and 2 V/us slew rate, while the TL054CN comparison lists 200 pA bias current and 1.3 V/us slew rate. These differences can alter DC accuracy and transient behavior. Recheck source-impedance errors, feedback bandwidth, output swing, and stability after any substitution.

Keep input and feedback traces short, and avoid routing them beneath or beside the shared positive-supply lead. Place the bypass capacitor where it can supply transient current without sharing a narrow trace with the input reference. For audio or measurement channels with meaningful source impedance, consider guarding between amplifier sections so high-impedance inputs do not collect leakage or injected noise from neighboring channels.

Confirm the operating supply voltage against the input common-mode range and output-swing limits in the manufacturer datasheet. A 2 V to 18 V rating identifies the permitted supply span, but it does not mean every output waveform is usable at the minimum rail. Check quiescent current and channel dissipation under the intended load before assigning the DIP device to a thermally enclosed control board.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The device is described as an industrial-temperature, 14-PDIP operational amplifier. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations are not stated in the product information and are therefore recorded as unknown.

Данные проверены: 2026-11-16 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MC33179PG MC33179PG datasheet MC33179PG datasheet pdf MC33179PG pinout MC33179PG specifications onsemi MC33179PG MC33179PG 14-DIP MC33179PG equivalent MC33179PG replacement MC33179PG vs TL054CN MC33179PG vs MC33178PG MC33179PG price MC33179PG stock MC33179PG audio preamplifier MC33179 active filter circuit

Связанные компоненты & термины

onsemi MC33179PG MC33179 MC33178PG TL054CN Texas Instruments operational amplifier quad operational amplifier general-purpose amplifier low-power amplifier low-noise amplifier bipolar input stage PNP input transistor gain-bandwidth product slew rate input bias current 14-PDIP DIP package through-hole package audio preamplification active filter sensor signal conditioning industrial control RoHS REACH
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ