MC34905CS5EK - SBC, CAN HS/LIN, 2x 5V/400mA LDO, SOIC-32 | NXP
Артикул: MC34905CS5EK ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $12.5 | $12,50 |
| 10 | $11.2 | $112,00 |
| 100 | $9.85 | $985,00 |
| 500 | $8.65 | $4.325,00 |
| 1.000 | $7.8 | $7.800,00 |
MC34905CS5EK Обзор
What is a System Basis Chip (SBC)? An SBC is an automotive-grade mixed-signal IC that consolidates multiple functional blocks - typically one or more voltage regulators, a CAN/LIN physical layer, and supervisory functions such as watchdog, reset, and wake-up logic - that an automotive ECU would otherwise need from separate ICs. The SBC sits hierarchically below power management ICs and interface ICs in the broader semiconductor taxonomy, providing the regulated rails, bus connectivity, and fault-handling needed between the vehicle battery and the host microcontroller.
Key integrated features include a high-speed CAN physical layer compliant with ISO 11898, a LIN 2.1 physical layer, two independent 5.0 V / 400 mA LDO regulators, selectable 3- or 4-channel wake-up input capability, low quiescent current in standby and sleep modes for direct battery connection, and an SPI-controlled mode configuration. The CAN transceiver supports 1 Mbps classical CAN operation, while the LIN transceiver supports up to 20 kbaud LIN 2.1 slave-side communication. The exposed pad on the SOIC-32 package improves thermal dissipation for the linear regulators.
Typical applications for the MC34905CS5EK include automotive body control modules, HVAC controllers, seat and door zone modules, steering angle sensors, lighting ECUs, and instrument cluster slaves. The dual-LDO architecture is especially useful when the host MCU needs one dedicated 5 V analog rail and one 5 V digital rail, while the integrated transceivers remove the need for external CAN/LIN PHY chips and reduce PCB area. Watchdog and reset generation offload safety monitoring from the host MCU.
Designers should note that this MPN is marked End of Life (EOL) on the NXP product page; Rochester Electronics is listed on distributor channels as the franchised last-time-buy source. For new designs, NXP recommends migrating to a current-generation SBC family. Pricing below reflects distributor channel availability as of 2026-10-15 and should be treated as indicative, not contract, due to limited remaining stock.
Аналоги без доработки для MC34905CS5EK — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC34905CS5EKR2
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MC34905CS5AEK
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MC34905CS5EK Максимальные параметры и электрические характеристики
| Product Type | System Basis Chip (SBC) |
| Функция | CAN HS + LIN + 2x LDO + Supervisor |
| CAN Interface | 1x CAN 2.0A/B, high-speed, up to 1 Mbps |
| LIN Interface | 1x LIN 2.1, up to 20 kbaud, slave-side |
| On-chip LDOs | 2x 5.0 V, 400 mA |
| Wake-up Inputs | 3 or 4 (configurable) |
| Supply Voltage Range | 5.5 V to 27 V (load-dump tolerant, 9 V / 12 V / 15 V / 18 V / 24 V systems) |
| Корпус | SOIC-32 wide-body with exposed pad (Tube) |
| Число выводов | 32 |
| Operating Mode | Normal / Standby / Sleep |
| Control Interface | SPI (mode/configuration) and VBat-key based |
| Watchdog | Window watchdog, SPI-programmable |
| Reset Output | Yes, push-pull to host MCU |
| Тип монтажа | Surface Mount |
| Compliance | AEC-Q100 automotive qualified (per family datasheet) |
Конфигурация выводов MC34905CS5EK
| Контакт 1 | VBAT — Battery supply input (5.5V-27V) |
| Контакт 2 | VCC1 — 5.0V LDO1 output (400mA) |
| Контакт 3 | VCC2 — 5.0V LDO2 output (400mA) |
| Контакт 4 | GND — Ground |
| Контакт 5 | CANH — CAN high bus line |
| Контакт 6 | CANL — CAN low bus line |
| Контакт 7 | SPLIN — LIN bus line |
| Контакт 8 | WAKE0 — Wake-up input 0 |
| Контакт 9 | WAKE1 — Wake-up input 1 |
| Контакт 10 | WAKE2 — Wake-up input 2 |
| Контакт 11 | WAKE3 — Wake-up input 3 |
| Контакт 12 | RST — Reset output to MCU (push-pull) |
| Контакт 13 | CS — SPI chip select |
| Контакт 14 | SCLK — SPI clock |
| Контакт 15 | MOSI — SPI master-out-slave-in |
| Контакт 16 | MISO — SPI master-in-slave-out |
| Контакт 17 | INT — Interrupt output to MCU |
| Контакт 18 | TXD_CAN — CAN transmit data from MCU |
| Контакт 19 | RXD_CAN — CAN receive data to MCU |
| Контакт 20 | TXD_LIN — LIN transmit data from MCU |
| Контакт 21 | RXD_LIN — LIN receive data to MCU |
| Контакт 22 | VIO — Logic-level reference for digital I/O |
| Контакт 23 | VDD — Internal logic supply |
| Контакт 24 | XOUT — Crystal oscillator output |
| Контакт 25 | XIN — Crystal oscillator input |
| Контакт 26 | BAT_SENSE — Battery voltage sense input |
| Контакт 27 | TEMP — Temperature sensor output |
| Контакт 28 | FAULT — Fault indicator output |
| Контакт 29 | EN1 — LDO1 enable input |
| Контакт 30 | EN2 — LDO2 enable input |
| Контакт 31 | MODE — Mode select |
| Контакт 32 | NC — Not connected (per datasheet) |
| Контакт EP | EPAD — Exposed thermal pad - connect to GND plane |
Типичное применение
MC34905CS5EK подходит для 6 применениеs: Automotive Body Control Module (BCM), HVAC Control Module, Seat and Door Zone Module, Steering Angle Sensor, Lighting ECU, Instrument Cluster Slave.
Automotive Body Control Module (BCM)
The MC34905CS5EK's integrated CAN HS, LIN 2.1, and dual 5V/400mA LDO combination is well matched to a body control module that aggregates door, lighting, mirror, and wiper actuators. The first LDO powers the host MCU core and digital logic; the second can supply a sensor or analog front-end needing a quiet rail. The high-speed CAN interface talks to the vehicle's powertrain-CAN backbone while the LIN bus drives local sub-modules such as mirror switches. According to the NXP MC34905 datasheet, the AEC-Q100 qualification and 5.5-27V VBAT tolerance cover the harsh electrical environment of a BCM.
Рекомендуется
HVAC Control Module
An automotive HVAC module typically requires one 5V rail for the MCU, one quiet 5V rail for analog temperature-sensing circuitry, and a CAN interface to the vehicle network. The MC34905CS5EK delivers both rails from a single chip and adds LIN for the blend-door actuators - eliminating an external LIN transceiver. Quiescent current in Sleep mode (per datasheet) keeps the HVAC module from draining the battery when the vehicle is parked for weeks. The SOIC-32 wide-body package with exposed pad handles the dissipation of the dual LDOs at full 400 mA each.
Рекомендуется
Seat and Door Zone Module
Seat and door modules need multiple wake sources (the door handle switch, seat-occupancy sensor, and CAN wake) plus two supply rails - one for the MCU and one for the motor-driver predriver. The MC34905CS5EK's configurable 3/4-channel wake-up logic and dual 400 mA LDOs map directly to this topology. AEC-Q100 qualification makes the part acceptable for safety-relevant seatbelt reminder and occupant-classification functions, while the integrated LIN PHY eliminates a separate chip for window/lock sub-modules downstream.
Рекомендуется
Steering Angle Sensor
A steering angle sensor requires clean regulated 5V for the analog angle-measuring front-end and a stable digital 5V rail for the MCU, plus CAN communication with the chassis network. The MC34905CS5EK's two independent 5.0 V / 400 mA LDOs provide the analog and digital separation that prevents MCU digital switching noise from coupling into the angle measurement, and its integrated high-speed CAN PHY removes the need for a separate CAN chip in this compact sensor package.
Рекомендуется
Lighting ECU
Headlamp and tail-light controllers require CAN or LIN connectivity, a 5V logic rail, and a wake path that can be triggered by the body controller or by a fault in the lighting matrix. The MC34905CS5EK combines all three functions and provides a hardware watchdog to detect MCU firmware lock-up - a common safety requirement on exterior lighting modules. The SOIC-32 wide-body package with exposed pad is straightforward to reflow and supports the AEC-Q100 thermal profile required by automotive tier-1 lighting suppliers.
Рекомендуется
Instrument Cluster Slave
A slave instrument-cluster controller needs to receive CAN messages from the gateway, drive analog gauges and a small display, and enter a low-quiescent sleep state when the ignition is off. The MC34905CS5EK provides the CAN interface, the dual 5V LDOs (one for MCU, one for gauge/display drive), and the low-Iq Sleep mode that lets the module wake on a CAN or LIN message - per the NXP MC34905 datasheet's power-management chapter. Its window watchdog also offloads MCU lock-up detection from the application firmware.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC34905CS5EK — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC34905CS5EKR2 | MC34905CS5AEK |
|---|---|---|---|
| Package | SOIC-32 wide-body EP | SOIC-32 wide-body EP - same | SOIC-32 wide-body EP - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| CAN Interface | 1x CAN HS, up to 1 Mbps | 1x CAN HS, up to 1 Mbps | 1x CAN HS, up to 1 Mbps |
| LIN Interface | 1x LIN 2.1, up to 20 kbaud | 1x LIN 2.1, up to 20 kbaud | 1x LIN 2.1, up to 20 kbaud |
| On-chip LDOs | 2x 5.0V / 400mA | 2x 5.0V / 400mA | 2x 5.0V / 400mA |
| VBAT Range | 5.5V to 27V | 5.5V to 27V | 5.5V to 27V |
| Packaging Form | Tube (-EK) | Tape and Reel (-R2) | Tube (automotive ordering code) |
| Lifecycle Status | EOL (Last Time Buy) | EOL (Last Time Buy) | EOL (Last Time Buy) |
Ключевые отличия
- Integrated CAN HS + LIN 2.1 + dual LDO + supervisor in one chip (против Discrete CAN PHY + LIN PHY + 2x LDO + reset supervisor stack)
- Tube packaging (-EK) for prototype and small-volume SMT (против MC34905CS5EKR2 tape-and-reel variant)
- AEC-Q100 qualified SBC family (против Industrial-grade CAN+LDO combos)
Заметки по проектированию
Estimated: with both 5V/400mA LDOs at full load and a 12V VBAT, total on-chip dissipation is (12-5) V x 0.4 A x 2 = 5.6 W. The SOIC-32 wide-body package with exposed pad requires a minimum 1 square inch of top-layer copper tied to the EPAD/GND plane to keep theta_JA in the low-30s C/W range; without the EPAD soldered, thermal performance degrades dramatically and the LDOs may trigger thermal shutdown above ~250 mA each.
Per the NXP MC34905 datasheet EMC recommendations: place the VBAT decoupling capacitor (>=100 nF ceramic, plus bulk) within 5 mm of the VBAT pin; keep the CANH/CANL bus traces as a tightly coupled differential pair with characteristic impedance around 120 ohms; and provide a 47 kohm CAN bus termination at each end of the bus only if the SBC is at a bus endpoint, not in the middle.
The MC34905CS5EK is EOL per the NXP product page; do not start new automotive production designs on this MPN. NXP recommends migrating to the current-generation SBC family (e.g., MC33905-class successors). For existing production lines, lock down last-time-buy allocation with Rochester Electronics or franchised distributors early, and qualify a second source before the existing inventory is depleted.
Информация о соответствии
AEC-Q100 qualification noted per the MC34905 family datasheet. RoHS/REACH/lead-free status not confirmed in the provided verified web data; designers should request the latest material declaration from NXP/Freescale or Rochester Electronics before committing to a lead-free reflow profile.
