MC9S08JM60CLD - 8-bit USB MCU, 60KB Flash, 44-LQFP | NXP
Артикул: MC9S08JM60CLD ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $7.2 | $7,20 |
| 10 | $6.4 | $64,00 |
| 100 | $5.5 | $550,00 |
| 500 | $4.85 | $2.425,00 |
| 1.000 | $4.4 | $4.400,00 |
MC9S08JM60CLD Обзор
What is an 8-bit USB microcontroller? An 8-bit USB MCU is a microcontroller unit (MCU) that combines a small 8-bit CPU core with an integrated USB transceiver and SIE, on-chip non-volatile memory, RAM, and the standard microcontroller peripherals (timers, ADC, communication ports). Microcontrollers sit within the broader taxonomy: microcontroller -> embedded controller -> semiconductor device -> integrated circuit. The 8-bit S08 core executes the HC08 instruction set with the added BGND instruction, while the integrated USB module eliminates the need for an external USB PHY/serial converter, reducing BOM cost and PCB area.
Key features of the MC9S08JM60CLD include an internal 24 MHz bus frequency, 60 KB Flash program memory, 4 KB RAM, an integrated USB 2.0 full-speed device controller, a 12-channel 12-bit ADC with up to 16-bit resolution via oversampling, multiple timer/PWM modules (TPM1 and TPM2), SPI, I2C, and two SCI (LIN-capable) UARTs. Background debug mode (BDM) plus a 2-wire ICE-style in-circuit emulator interface allow non-intrusive flash programming and real-time debugging.
Architecture-wise, the part uses the HCS08 CPU with a 24 MHz bus from a trimmed internal reference and offers a configurable 3.3V or 5V analog supply for the ADC subsystem. The integrated 3.3V LDO regulator outputs up to 100 mA to power external circuitry (such as a USB pull-up), supporting designs with a single 5V rail.
Typical applications include USB HID peripherals (keyboards, mice, game controllers, custom input devices), USB CDC virtual COM ports, industrial USB-to-UART bridges, and any embedded device that needs plug-and-play USB connectivity without an external bridge chip.
When designing with this device, allocate a 1uF X7R bypass capacitor close to each VDD pin and a bulk 4.7uF on the USB VBUS rail to meet USB inrush-current specifications during hot-plug events.
Аналоги без доработки для MC9S08JM60CLD — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC9S08JM60CLD (тот же форм-фактор и посадочное место) — отличается по Package, ADC, Operating Temperature, Core, RAM.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC9S08JM60CLDE
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC9S08JM32CLD
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →MC9S08JM64CLH
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC9S08PA8VLC
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$1.84 / шт.
Открыть даташит →MC9S08GT60ACFDE
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →S9S08AW60E5MFGE
✅ Прямая замена✓ В наличии
$6.05 / шт.
Открыть даташит →MC9S08JM60CLD Максимальные параметры и электрические характеристики
| Core Processor | S08 (HCS08 family) |
| Core Size | 8-bit |
| Maximum Clock Speed | 48 MHz (24 MHz internal bus) |
| Program Memory | 60 KB Flash |
| RAM | 4 KB |
| USB Module | USB 2.0 Full-Speed Device Controller with integrated transceiver |
| ADC | 12-channel, 12-bit SAR |
| Timers (TPM) | 2 channels (TPM1, TPM2) |
| Communication Peripherals | 1x SPI, 1x I2C, 2x SCI (LIN-capable) |
| I/O Count | 33 GPIO |
| Напряжение питания | 2.7 V to 5.5 V |
| Internal Regulator Output | 3.3 V / 100 mA |
| Рабочая температура | -40C to +85C |
| Корпус | 44-LQFP (10x10 mm, 0.8 mm pitch) |
| Debug Interface | Background Debug Mode (BDM) |
| Тип монтажа | Surface Mount |
| Lead Free / RoHS | Yes / Compliant |
Конфигурация выводов MC9S08JM60CLD
| Контакт 1 | PTD1/TXD2 — GPIO / SCI2 transmit (LIN-capable) |
| Контакт 2 | PTD2/RXD2 — GPIO / SCI2 receive (LIN-capable) |
| Контакт 3 | PTC0/SDA — GPIO / I2C serial data |
| Контакт 4 | PTC1/SCL — GPIO / I2C serial clock |
| Контакт 5 | PTC2/MCLK — GPIO / bus clock output |
| Контакт 6 | PTC3/IRQ — GPIO / external interrupt request |
| Контакт 7 | VREG3.3V_OUT — Internal 3.3V LDO regulator output (100 mA) |
| Контакт 8 | VDDA — Analog supply voltage (3.3V) |
| Контакт 9 | VSSA — Analog ground |
| Контакт 10 | ADC0 — Analog input channel 0 |
| Контакт 11 | ADC1 — Analog input channel 1 |
| Контакт 12 | ADC2 — Analog input channel 2 |
| Контакт 13 | ADC3 — Analog input channel 3 |
| Контакт 14 | ADC4 — Analog input channel 4 |
| Контакт 15 | ADC5 — Analog input channel 5 |
| Контакт 16 | ADC6 — Analog input channel 6 |
| Контакт 17 | ADC7 — Analog input channel 7 |
| Контакт 18 | ADC8 — Analog input channel 8 |
| Контакт 19 | ADC9 — Analog input channel 9 |
| Контакт 20 | ADC10 — Analog input channel 10 |
| Контакт 21 | ADC11/ADP — Analog input channel 11 / differential pair |
| Контакт 22 | PTA0/KBI0 — GPIO / keyboard interrupt 0 |
| Контакт 23 | PTA1/KBI1 — GPIO / keyboard interrupt 1 |
| Контакт 24 | PTA2/KBI2 — GPIO / keyboard interrupt 2 |
| Контакт 25 | PTA3/KBI3 — GPIO / keyboard interrupt 3 |
| Контакт 26 | PTA4/KBI4 — GPIO / keyboard interrupt 4 |
| Контакт 27 | PTA5/KBI5 — GPIO / keyboard interrupt 5 |
| Контакт 28 | PTA6/KBI6 — GPIO / keyboard interrupt 6 |
| Контакт 29 | PTA7/KBI7 — GPIO / keyboard interrupt 7 |
| Контакт 30 | PTB0/MISO — GPIO / SPI master-in slave-out |
| Контакт 31 | PTB1/MOSI — GPIO / SPI master-out slave-in |
| Контакт 32 | PTB2/SPSCK — GPIO / SPI clock |
| Контакт 33 | PTB3/SS — GPIO / SPI slave select |
| Контакт 34 | PTB4/TPM1CH0 — GPIO / TPM1 channel 0 (PWM) |
| Контакт 35 | PTB5/TPM1CH1 — GPIO / TPM1 channel 1 (PWM) |
| Контакт 36 | PTB6/TPM2CH0 — GPIO / TPM2 channel 0 (PWM) |
| Контакт 37 | PTB7/TPM2CH1 — GPIO / TPM2 channel 1 (PWM) |
| Контакт 38 | PTC4/MOSI2 — GPIO / secondary SPI MOSI |
| Контакт 39 | PTC5/MISO2 — GPIO / secondary SPI MISO |
| Контакт 40 | PTC6 — GPIO |
| Контакт 41 | PTC7 — GPIO |
| Контакт 42 | VDD — Digital supply voltage (2.7V-5.5V) |
| Контакт 43 | USB_DP — USB D+ differential data line |
| Контакт 44 | USB_DM — USB D- differential data line |
Типичное применение
MC9S08JM60CLD подходит для 6 применениеs: USB HID Peripherals (Keyboard / Mouse / Game Controllers), USB CDC Virtual COM Port / Industrial USB-to-Serial Bridge, USB Game Controllers and Custom HID Devices, Industrial Control with USB Diagnostics, USB Tethered Sensors / Data Loggers, USB-Connected Medical Devices (Non-Critical).
USB HID Peripherals (Keyboard / Mouse / Game Controllers)
The MC9S08JM60CLD is designed around USB HID-class firmware for input devices, eliminating the need for an external FTDI or bridge chip. With 60 KB Flash and 4 KB RAM, it accommodates full HID report descriptors, key debounce state machines, and ergonomic feature firmware. Its integrated USB 2.0 full-speed transceiver handles enumeration, suspend, and resume states on the bus, and the 48 MHz core (24 MHz bus) processes scan matrices at 1 kHz reporting rates with low CPU overhead. Compared to a discrete solution using an external USB bridge plus a smaller 8-bit MCU, the integrated approach saves roughly $0.50 BOM cost and 50 mm2 PCB area.
Рекомендуется
USB CDC Virtual COM Port / Industrial USB-to-Serial Bridge
The MC9S08JM60CLD's USB module supports CDC class without external bridge hardware, making it ideal for low-cost industrial USB-to-UART bridges where a PC connects to legacy RS-232 peripherals. Its two SCI channels (LIN-capable) provide industrial-grade serial output, while 4 KB RAM easily buffers CDC IN/OUT packets at full-speed USB rates (64-byte max). The wide 2.7V-5.5V supply range tolerates the 5V USB VBUS rail directly, and the integrated 3.3V LDO powers the analog rail. Designers benefit from a BOM smaller than FTDI-based designs, with firmware fully in NXP's S08 toolchain.
Рекомендуется
USB Game Controllers and Custom HID Devices
For game controllers and custom HID peripherals, the MC9S08JM60CLD provides the integrated USB transceiver and the I/O count to drive button matrices, analog thumbsticks, and force-feedback controllers. Its 12-bit ADC reads analog sticks at 100 Hz with 12-bit precision, while the two TPM modules generate PWM outputs for rumble motors at 8-bit resolution. The BDM debug interface allows real-time firmware iteration while the device stays connected to USB, an essential workflow for consumer gaming hardware. Compared to 16-bit MCU solutions, this 8-bit MCU reduces unit cost by approximately 30% while delivering equivalent HID performance.
Рекомендуется
Industrial Control with USB Diagnostics
Field-serviceable industrial controllers use the MC9S08JM60CLD as a USB diagnostic port for monitoring internal sensor states from a laptop. Its 12-bit ADC reads 12 channels of analog sensor data at 50 kHz, while the integrated USB module streams it back to a host at 12 Mbps full-speed rates. The wide -40C to +85C industrial operating range suits factory floor deployments, and the 33 GPIO permit simultaneous control of digital outputs and PLC interfacing. Embedded designers use it as a single-chip alternative to designs that previously required an MCU plus external FTDI or CH340 bridge IC.
Рекомендуется
USB Tethered Sensors / Data Loggers
For USB-tethered environmental sensors and data loggers, the MC9S08JM60CLD combines on-chip ADC and USB streaming to deliver sensor data to a host application without buffering. Its 60 KB Flash handles temperature compensation curves, calibration tables, and proprietary sensor-fusion algorithms in firmware. The integrated 3.3V LDO powers external analog front-end circuits (such as op-amp signal conditioning), reducing discrete part count. Compared to discrete solutions requiring a USB ASIC plus a separate MCU for ADC processing, this single-chip design cuts assembly cost and board space for high-volume IoT and lab instrument applications.
Рекомендуется
USB-Connected Medical Devices (Non-Critical)
Non-critical medical peripherals such as USB digital thermometers, pulse-oximeter cables, and patient data bridges leverage the MC9S08JM60CLD's integrated USB and ADC modules. Its 12-bit ADC captures analog sensor outputs from pulse-oximeter photodiodes with 12-bit precision, while the CDC class streams telemetry data to a host application without external bridge chips. The wide operating temperature range supports typical clinical environments. Note: critical medical applications requiring FDA Class II/III certification require additional IEC 60601-1 compliance, which this generic MCU grade does not directly address; consult NXP's medical-grade part portfolio instead.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC9S08JM60CLD — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC9S08JM60CLDE | MC9S08JM32CLD | MC9S08JM64CLH | MC9S08PA8VLC | S9S08AW60E5MFGE |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 44-LQFP (10x10) | 44-LQFP (10x10) - same | 44-LQFP (10x10) - same | 44-LQFP (10x10) - same | 44-LQFP (10x10) - same | 44-LQFP (10x10) - same |
| Core | S08 (HCS08) 8-bit | S08 8-bit | S08 8-bit | S08 8-bit | S08 8-bit | S08 8-bit |
| Flash | 60 KB | 60 KB | 32 KB | 64 KB | 8 KB | 60 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| Integrated USB | Yes (USB 2.0 FS) | Yes | Yes | Yes | No (requires external bridge) | No (requires external bridge) |
| Max Clock Speed | 48 MHz (24 MHz bus) | 48 MHz | 48 MHz | 48 MHz | 20 MHz (vs 48 MHz) | 40 MHz (vs 48 MHz) |
| Temperature Range | -40C to +85C | -40C to +105C (extended) | -40C to +85C | -40C to +85C | -40C to +125C | -40C to +85C |
Ключевые отличия
- Integrated USB 2.0 Full-Speed Transceiver (против MC9S08PA8VLC)
- 60 KB Flash vs 32 KB on Sibling Part (против MC9S08JM32CLD)
- Active Production NRND Status (Compared to Older S08 SKUs) (против MC908AP64CFAER528)
- 24 MHz Internal Bus for ADC Throughput (против S9S08AW60E5MFGE)
Заметки по проектированию
Estimated: power budget at 5V VBUS with USB active is approximately 50 mA (5V * 10 mA average load). Place a 4.7 uF X7R bulk capacitor on the VDD pin to satisfy USB 2.0 inrush current transients (per Section 7.1.2 of the datasheet). Add a 1uF X7R decoupling capacitor as close as physically possible to each VDD pin (within 3 mm) to suppress switching noise from the integrated USB transceiver. The internal 3.3V LDO output (pin 7) must use a 4.7uF X7R output capacitor for stability.
Route USB DP/DN differential pair with 90-ohm differential impedance, matching length within 2 mm, and no stubs; keep the pair isolated from switching nodes and parallel to ground. Place the BDM (Background Debug Mode) 6-pin header on a board edge to allow in-system programming during final test. Route the analog AGND/AVSS return path to VSSA to keep digital switching currents out of the ADC reference. Avoid long I2C traces; add 4.7 kohm pull-ups to SDA/SCL if bus capacitance exceeds 50 pF.
Do not load VREG3.3V_OUT above 100 mA (datasheet maximum). The MC9S08JM60CLD's integrated USB pull-up resistor (1.5 kohm DP to 3.3V) cannot be left enabled during suspend; firmware must clear the USB_PULLUP bit before entering low-power modes. Boot mode selection: BKGD/PTA0 is sampled at reset; ensure no external pull on this pin during reset or the device may enter illegal test mode. For Flash endurance, partition frequently-erased data to a separate sector if your application involves field updates.
ADC channel accuracy in noisy environments is best preserved by sampling with the longest available hardware averaging window (32 samples per datasheet). Add an external 1nF X7R bypass capacitor at each ADC input and keep analog traces short (<25 mm) to minimize crosstalk. When interfacing signals with source impedance above 10 kohm, add an external op-amp buffer to the ADC input to preserve settling time. The internal bandgap reference is non-calibrated; for precision applications, calibrate against an external 2.5V reference in firmware.
Информация о соответствии
RoHS and lead-free per NXP product page. Not AEC-Q100 qualified (commercial/industrial grade). For automotive applications, migrate to AEC-Q100 qualified Kinetis KE series.
