MC9S08PA4VWJ - 8-Bit S08 MCU, 4KB Flash, 20MHz, 20-SOIC | NXP
Артикул: MC9S08PA4VWJ ✗ Снят с производстваMC9S08PA4VWJ Обзор
An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog converters. The S08 core sits inside the broader hierarchy of embedded controllers: MCU -> 8-bit microcontroller -> S08 family -> S08P scalable platform. The S08P family reuses the same core, IP, and development tools across pin-compatible members, which makes migration between density grades straightforward.
Key features of the MC9S08PA4VWJ include an 8-bit S08 central processor unit running up to 20 MHz, 4 KB of program Flash, an integrated 12-bit analog-to-digital converter, an analog comparator, EEPROM data memory, and a motor control Flex Timer Module. The device supports up to 40 interrupt and reset sources with up to four levels of nested interrupts, allowing real-time responses without software polling overhead.
The device is specified across a 2.7 V to 5.5 V operating supply range, which covers both 3.3 V and 5 V system rails, and the extended temperature option supports -40 degrees C to +105 degrees C industrial ambient conditions. Because the S08P platform is a scaled 5 V family, the on-chip voltage regulator and bus clocking are designed for reliable 5 V operation rather than low-voltage micro-power duty cycles.
Typical applications include small brushless DC motor controllers, fan and pump speed controls, appliance user interfaces, LED lighting drivers, keypad and panel interfaces, and simple sensor conditioning nodes. The ADC plus comparator pairing also suits battery monitoring, thermistor, and potentiometer front ends where a dedicated external converter would otherwise add cost.
When designing around this part, remember that the 20 MHz bus speed is guaranteed at 2.7 V and above across the full temperature range, so no derating is needed for industrial environments. Use the pin description table in the manufacturer data sheet for exact ball and pad assignments, and keep the on-chip regulator and decoupling network close to the supply pins to limit switching and analog noise on the ADC reference.
This page brings together lifecycle status, package and pin information, drop-in upgrade paths within the S08P family, and practical layout guidance so that engineers can evaluate the MC9S08PA4VWJ against larger-memory alternatives before committing to a board spin.
Аналоги без доработки для MC9S08PA4VWJ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC9S08PA4VWJ (тот же форм-фактор и посадочное место) — отличается по Package, Connectivity, Core Processor, Operating Temperature, Peripherals.
MC9S08PA4VWJR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC9S08PA4CWJR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC9S08PA4CVWJ
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC9S08PA4VTG
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →MC9S08SH4CWJR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MC9S08PA4VWJ Максимальные параметры и электрические характеристики
| CPU Core | 8-bit S08 central processor unit |
| Program Memory (Flash) | 4 KB (4K x 8) |
| Maximum Bus Frequency | 20 MHz at 2.7 V to 5.5 V |
| Рабочее напряжение питания | 2.7 V to 5.5 V |
| Корпус | 20-SOIC (SOIC-20, narrow body) |
| Тип монтажа | Surface Mount |
| Analog-to-Digital Converter | 12-bit ADC |
| Analog Comparator | Integrated |
| Motor Control Timer | Flex Timer Module (FTM) for motor control |
| Interrupt and Reset Sources | Up to 40 |
| Nested Interrupt Levels | Up to 4 levels |
| Диапазон рабочих температур | -40 degrees C to +105 degrees C |
| Статус RoHS | Compliant |
| Lead-Free Status | Lead free |
| EFT/ESD Performance | Marked as strong EFT/ESD robustness in the S08P family |
| Efficiency of Tool Chain | Reuses existing S08 core, IP and tools for family migration |
Руководство по цоколевке MC9S08PA4VWJ в корпусе 20-soic (soic-20, narrow body)
Цоколевка для MC9S08PA4VWJ (корпус 20-soic (soic-20, narrow body)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MC9S08PA4VWJ.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MC9S08PA4VWJ подходит для 6 применениеs: Small Brushless DC Motor Controller, Appliance User Interface and Control Panel, LED Lighting and Dimming Driver, Sensor Conditioning and Battery Monitoring Node, Small Pump, Fan, and Valve Control, Legacy Equipment Service and Retrofit.
Small Brushless DC Motor Controller
The MC9S08PA4VWJ suits small brushless DC fan, pump, and appliance motor controllers because its motor control Flex Timer Module handles complementary PWM outputs and fast fault handling while the 20 MHz S08 core leaves headroom for commutation logic and a speed control loop. The 12-bit ADC samples hall sensors, potentiometer speed commands, or shunt-based current feedback, and the integrated analog comparator provides a fast over-current trip without an external part. Operating from 2.7 V to 5.5 V lets the same board run from a 5 V rectified rail or a 3.3 V regulated bus, and the -40 to +105 degrees C rating suits appliance and industrial motor housings.
Рекомендуется
Appliance User Interface and Control Panel
In washing machines, dishwashers, and kitchen appliances the MC9S08PA4VWJ consolidates keypad scanning, display drive, and load sensing into one low-cost 8-bit device. Its 40 interrupt and reset sources with four nesting levels allow timer, keypad, and motor events to be prioritized without polling loops, while the 4 KB Flash is sufficient for a compact state machine and the 12-bit ADC reads pot positions or temperature sensors through resistive dividers. The 20-SOIC package keeps the footprint small for densely populated control boards, and the wide 2.7 V to 5.5 V supply range tolerates the 5 V rails typical in appliance electronics.
Рекомендуется
LED Lighting and Dimming Driver
The MC9S08PA4VWJ works well in constant-current LED lighting and dimming modules where the Flex Timer Module generates the PWM dimming signal and the ADC closes a current-regulation loop. Because the S08P platform targets 5 V systems with strong EFT/ESD performance, the part suits mains-derived lighting modules that must survive industrial transients. The analog comparator provides a fast hardware over-current or open-LED fault path, and the 20 MHz CPU rate leaves room for flicker-free modulation at high update rates. With 4 KB of Flash the dimming profile, temperature compensation curves, and fault logging fit without external memory.
Рекомендуется
Sensor Conditioning and Battery Monitoring Node
The MC9S08PA4VWJ turns a resistive or thermistor sensor into a digital report using its 12-bit ADC, then applies linearization, filtering, and thresholding on the 20 MHz core before forwarding results over a serial interface. A dedicated comparator tracks fast limit crossings such as over-temperature or low-battery events without waking the CPU. Its low pin count and small SOIC-20 land pattern suit compact, battery-backed condition monitoring nodes distributed across equipment, and the 2.7 V minimum supply supports operation directly from a regulated 3 V rail, reducing the need for a boost stage in energy-harvesting designs.
Рекомендуется
Small Pump, Fan, and Valve Control
Compact pump, fan, and solenoid valve controllers benefit from the MC9S08PA4VWJ because one device can run the motor driver PWM through the Flex Timer Module, supervise current with the comparator, and read the flow or pressure sensor through the ADC. The 40-source interrupt architecture lets protection functions such as dry-run and stall detection preempt routine control code, improving response time over polling designs. The 20-SOIC package limits board area in space-constrained heating and ventilation equipment, and the -40 to +105 degrees C rating supports unheated plant rooms where temperature swings are common.
Рекомендуется
Legacy Equipment Service and Retrofit
Because the MC9S08PA4VWJ is offered as NRND, it is frequently specified for service spares and retrofit of previously released industrial and appliance equipment. Keeping the same S08PA die, 4 KB Flash organization, and 20-SOIC pinout means existing boards can be repopulated without respinning the PCB, and existing S08 firmware and debug tooling carry over directly. For mixed fleets, the related 20-SOIC S08PA grades give procurement a way to align temperature grade and packing with the original assembly while the platform remains supported for service use.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC9S08PA4VWJ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC9S08PA4VWJR | MC9S08PA4CWJR | MC9S08PA4CVWJ | MC9S08PA4VTG | MC9S08SH4CWJR |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | SOIC-20 (20-SOIC) | SOIC-20 (20-SOIC) - same | SOIC-20 (20-SOIC) - same | SOIC-20 (20-SOIC) - same | SOIC-20 (20-SOIC) - same | SOIC-20 (20-SOIC) - same |
| CPU Core | 8-bit S08 | 8-bit S08 | 8-bit S08 | 8-bit S08 | 8-bit S08 | 8-bit S08SH family |
Ключевые отличия
- On-chip 12-bit ADC plus analog comparator in an 8-bit MCU (против MC9S08PT16VWJ)
- Motor control Flex Timer Module in the same 20-SOIC footprint (против MC9S08SH4CWJR)
- Pin-compatible in-family second sourcing without PCB change (против MC9S08PA4CVWJ)
- 20 MHz performance guaranteed across 2.7 V to 5.5 V (против MC9S08PA4VWJR)
Заметки по проектированию
Place the MCU decoupling network directly at the supply and ground pins rather than at the connector. Use a short, low-impedance ground plane connection for the supply return, and route analog ADC inputs away from PWM and Flex Timer outputs to avoid coupling from switching edges. Keep the ADC reference decoupling close to the analog supply pins, and follow the pin assignment table in the manufacturer data sheet for the exact 20-pin SOIC connectivity.
Estimated: for a 5 V rail at 20 MHz the on-chip logic dominates device dissipation, and the NXP data sheet states that power dissipation on I/O pins is usually small compared with on-chip logic and voltage regulator dissipation and is user determined. Confirm your worst-case total current in the data sheet electrical characteristics, and size the PCB for the SOIC-20 thermal resistance with adequate copper area so the junction temperature stays within the -40 to +105 degrees C rating.
Do not assume another manufacturer's 8-bit MCU in a 20-pin SOIC can be substituted: the S08 core instruction set, interrupt vector table, and Flex Timer Module register map are unique, so replacing the MCU requires a firmware port even when the footprint matches. Also verify the temperature grade suffix on any alternate ordering code, because mixing grades changes the acceptable ambient range of the assembled product.
For motor control use, keep the Flex Timer Module PWM traces short and pair them with a ground reference, and place the comparator and current-sense inputs behind the smallest possible loop area. Because the S08P family is noted for strong EFT/ESD performance, keep the reset and debug programming interface accessible and follow the recommended programming header layout in the manufacturer data sheet to preserve field re-flash capability.
Информация о соответствии
RoHS compliant and lead-free status confirmed from the manufacturer product listing. No AEC-Q100 qualification is stated for this industrial-grade part. REACH, halogen-free, and conflict-minerals declarations are not published for this ordering code.
