MC9S08PA4VWJ - 8-Bit S08 MCU, 4KB Flash, 20MHz, 20-SOIC | NXP
MPN: MC9S08PA4VWJ ✗ Son Kullanım ZamanıMC9S08PA4VWJ Genel Bakış
An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog converters. The S08 core sits inside the broader hierarchy of embedded controllers: MCU -> 8-bit microcontroller -> S08 family -> S08P scalable platform. The S08P family reuses the same core, IP, and development tools across pin-compatible members, which makes migration between density grades straightforward.
Key features of the MC9S08PA4VWJ include an 8-bit S08 central processor unit running up to 20 MHz, 4 KB of program Flash, an integrated 12-bit analog-to-digital converter, an analog comparator, EEPROM data memory, and a motor control Flex Timer Module. The device supports up to 40 interrupt and reset sources with up to four levels of nested interrupts, allowing real-time responses without software polling overhead.
The device is specified across a 2.7 V to 5.5 V operating supply range, which covers both 3.3 V and 5 V system rails, and the extended temperature option supports -40 degrees C to +105 degrees C industrial ambient conditions. Because the S08P platform is a scaled 5 V family, the on-chip voltage regulator and bus clocking are designed for reliable 5 V operation rather than low-voltage micro-power duty cycles.
Typical applications include small brushless DC motor controllers, fan and pump speed controls, appliance user interfaces, LED lighting drivers, keypad and panel interfaces, and simple sensor conditioning nodes. The ADC plus comparator pairing also suits battery monitoring, thermistor, and potentiometer front ends where a dedicated external converter would otherwise add cost.
When designing around this part, remember that the 20 MHz bus speed is guaranteed at 2.7 V and above across the full temperature range, so no derating is needed for industrial environments. Use the pin description table in the manufacturer data sheet for exact ball and pad assignments, and keep the on-chip regulator and decoupling network close to the supply pins to limit switching and analog noise on the ADC reference.
This page brings together lifecycle status, package and pin information, drop-in upgrade paths within the S08P family, and practical layout guidance so that engineers can evaluate the MC9S08PA4VWJ against larger-memory alternatives before committing to a board spin.
Drop-in alternatifler için MC9S08PA4VWJ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MC9S08PA4VWJ (aynı form faktörü ve ayağa oturma) — farklı olan Package, Connectivity, Core Processor, Operating Temperature, Peripherals.
MC9S08PA4VWJR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MC9S08PA4CWJR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MC9S08PA4CVWJ
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MC9S08PA4VTG
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MC9S08SH4CWJR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MC9S08PA4VWJ Maksimum Değerlendirmeler & Elektriksel Özellikler
| CPU Core | 8-bit S08 central processor unit |
| Program Memory (Flash) | 4 KB (4K x 8) |
| Maximum Bus Frequency | 20 MHz at 2.7 V to 5.5 V |
| İşletim Besleme Gerilimi | 2.7 V to 5.5 V |
| Paket | 20-SOIC (SOIC-20, narrow body) |
| Montaj Türü | Surface Mount |
| Analog-to-Digital Converter | 12-bit ADC |
| Analog Comparator | Integrated |
| Motor Control Timer | Flex Timer Module (FTM) for motor control |
| Interrupt and Reset Sources | Up to 40 |
| Nested Interrupt Levels | Up to 4 levels |
| İşletim Sıcaklığı Aralığı | -40 degrees C to +105 degrees C |
| RoHS Durumu | Compliant |
| Lead-Free Status | Lead free |
| EFT/ESD Performance | Marked as strong EFT/ESD robustness in the S08P family |
| Efficiency of Tool Chain | Reuses existing S08 core, IP and tools for family migration |
MC9S08PA4VWJ 20-soic (soic-20, narrow body) Pin Yapısı Kılavuzu
MC9S08PA4VWJ (20-soic (soic-20, narrow body) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: MC9S08PA4VWJ.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MC9S08PA4VWJ için uygundur 6 uygulamas: Small Brushless DC Motor Controller, Appliance User Interface and Control Panel, LED Lighting and Dimming Driver, Sensor Conditioning and Battery Monitoring Node, Small Pump, Fan, and Valve Control, Legacy Equipment Service and Retrofit.
Small Brushless DC Motor Controller
The MC9S08PA4VWJ suits small brushless DC fan, pump, and appliance motor controllers because its motor control Flex Timer Module handles complementary PWM outputs and fast fault handling while the 20 MHz S08 core leaves headroom for commutation logic and a speed control loop. The 12-bit ADC samples hall sensors, potentiometer speed commands, or shunt-based current feedback, and the integrated analog comparator provides a fast over-current trip without an external part. Operating from 2.7 V to 5.5 V lets the same board run from a 5 V rectified rail or a 3.3 V regulated bus, and the -40 to +105 degrees C rating suits appliance and industrial motor housings.
Önerilen
Appliance User Interface and Control Panel
In washing machines, dishwashers, and kitchen appliances the MC9S08PA4VWJ consolidates keypad scanning, display drive, and load sensing into one low-cost 8-bit device. Its 40 interrupt and reset sources with four nesting levels allow timer, keypad, and motor events to be prioritized without polling loops, while the 4 KB Flash is sufficient for a compact state machine and the 12-bit ADC reads pot positions or temperature sensors through resistive dividers. The 20-SOIC package keeps the footprint small for densely populated control boards, and the wide 2.7 V to 5.5 V supply range tolerates the 5 V rails typical in appliance electronics.
Önerilen
LED Lighting and Dimming Driver
The MC9S08PA4VWJ works well in constant-current LED lighting and dimming modules where the Flex Timer Module generates the PWM dimming signal and the ADC closes a current-regulation loop. Because the S08P platform targets 5 V systems with strong EFT/ESD performance, the part suits mains-derived lighting modules that must survive industrial transients. The analog comparator provides a fast hardware over-current or open-LED fault path, and the 20 MHz CPU rate leaves room for flicker-free modulation at high update rates. With 4 KB of Flash the dimming profile, temperature compensation curves, and fault logging fit without external memory.
Önerilen
Sensor Conditioning and Battery Monitoring Node
The MC9S08PA4VWJ turns a resistive or thermistor sensor into a digital report using its 12-bit ADC, then applies linearization, filtering, and thresholding on the 20 MHz core before forwarding results over a serial interface. A dedicated comparator tracks fast limit crossings such as over-temperature or low-battery events without waking the CPU. Its low pin count and small SOIC-20 land pattern suit compact, battery-backed condition monitoring nodes distributed across equipment, and the 2.7 V minimum supply supports operation directly from a regulated 3 V rail, reducing the need for a boost stage in energy-harvesting designs.
Önerilen
Small Pump, Fan, and Valve Control
Compact pump, fan, and solenoid valve controllers benefit from the MC9S08PA4VWJ because one device can run the motor driver PWM through the Flex Timer Module, supervise current with the comparator, and read the flow or pressure sensor through the ADC. The 40-source interrupt architecture lets protection functions such as dry-run and stall detection preempt routine control code, improving response time over polling designs. The 20-SOIC package limits board area in space-constrained heating and ventilation equipment, and the -40 to +105 degrees C rating supports unheated plant rooms where temperature swings are common.
Önerilen
Legacy Equipment Service and Retrofit
Because the MC9S08PA4VWJ is offered as NRND, it is frequently specified for service spares and retrofit of previously released industrial and appliance equipment. Keeping the same S08PA die, 4 KB Flash organization, and 20-SOIC pinout means existing boards can be repopulated without respinning the PCB, and existing S08 firmware and debug tooling carry over directly. For mixed fleets, the related 20-SOIC S08PA grades give procurement a way to align temperature grade and packing with the original assembly while the platform remains supported for service use.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MC9S08PA4VWJ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MC9S08PA4VWJR | MC9S08PA4CWJR | MC9S08PA4CVWJ | MC9S08PA4VTG | MC9S08SH4CWJR |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | SOIC-20 (20-SOIC) | SOIC-20 (20-SOIC) - same | SOIC-20 (20-SOIC) - same | SOIC-20 (20-SOIC) - same | SOIC-20 (20-SOIC) - same | SOIC-20 (20-SOIC) - same |
| CPU Core | 8-bit S08 | 8-bit S08 | 8-bit S08 | 8-bit S08 | 8-bit S08 | 8-bit S08SH family |
Ana Farklılayıcılar
- On-chip 12-bit ADC plus analog comparator in an 8-bit MCU (karşılaştırma:MC9S08PT16VWJ)
- Motor control Flex Timer Module in the same 20-SOIC footprint (karşılaştırma:MC9S08SH4CWJR)
- Pin-compatible in-family second sourcing without PCB change (karşılaştırma:MC9S08PA4CVWJ)
- 20 MHz performance guaranteed across 2.7 V to 5.5 V (karşılaştırma:MC9S08PA4VWJR)
Tasarım Notları
Place the MCU decoupling network directly at the supply and ground pins rather than at the connector. Use a short, low-impedance ground plane connection for the supply return, and route analog ADC inputs away from PWM and Flex Timer outputs to avoid coupling from switching edges. Keep the ADC reference decoupling close to the analog supply pins, and follow the pin assignment table in the manufacturer data sheet for the exact 20-pin SOIC connectivity.
Estimated: for a 5 V rail at 20 MHz the on-chip logic dominates device dissipation, and the NXP data sheet states that power dissipation on I/O pins is usually small compared with on-chip logic and voltage regulator dissipation and is user determined. Confirm your worst-case total current in the data sheet electrical characteristics, and size the PCB for the SOIC-20 thermal resistance with adequate copper area so the junction temperature stays within the -40 to +105 degrees C rating.
Do not assume another manufacturer's 8-bit MCU in a 20-pin SOIC can be substituted: the S08 core instruction set, interrupt vector table, and Flex Timer Module register map are unique, so replacing the MCU requires a firmware port even when the footprint matches. Also verify the temperature grade suffix on any alternate ordering code, because mixing grades changes the acceptable ambient range of the assembled product.
For motor control use, keep the Flex Timer Module PWM traces short and pair them with a ground reference, and place the comparator and current-sense inputs behind the smallest possible loop area. Because the S08P family is noted for strong EFT/ESD performance, keep the reset and debug programming interface accessible and follow the recommended programming header layout in the manufacturer data sheet to preserve field re-flash capability.
Uyumluluk Bilgisi
RoHS compliant and lead-free status confirmed from the manufacturer product listing. No AEC-Q100 qualification is stated for this industrial-grade part. REACH, halogen-free, and conflict-minerals declarations are not published for this ordering code.
