MC9S08PL8SCTJ - 8-Bit 20MHz MCU with 8KB Flash | NXP
Артикул: MC9S08PL8SCTJ ✓ АктивенMC9S08PL8SCTJ Обзор
An 8-bit microcontroller is a compact embedded-control device built around an 8-bit processing architecture. Within the semiconductor hierarchy, it belongs to the microcontroller, embedded-processing, and semiconductor categories. The S08P family combines the established S08 core and reusable intellectual property with streamlined peripherals, making it practical for cost-sensitive products that require deterministic control, analog measurement, and modest program-memory capacity.
The principal benefits of the MC9S08PL8SCTJ are its 20 MHz operating speed, 8 KB of flash memory, 10-bit ADC, analog comparator, and flexible timer resources. The 20-pin TSSOP package also supports compact surface-mount PCB layouts. Its 3.3 V and 5 V operation gives designers flexibility when interfacing with industrial, appliance, automotive, and general-purpose control systems. AEC-Q100 qualification is especially relevant when component selection must meet automotive quality requirements.
The device belongs to the pin-compatible S08P family, allowing design migration to related family members while reusing the S08 core, intellectual property, and development tools. This scalability is important for products that may progress from an 8 KB configuration to a larger memory option. Exact RAM, timer-channel, ADC-channel, pin, and electrical-limit assignments should be taken from the manufacturer pin-description and parameter tables before PCB routing or production release.
Typical uses include compact automotive controllers, appliance interfaces, motor and relay control, industrial sensing nodes, keypad controls, and low-cost embedded systems. In an automotive sensing application, the ADC can acquire analog sensor values, the comparator can provide a fast threshold function, and the timers can organize periodic control tasks without requiring a higher-bit processor.
A key design consideration is package and family planning. Use the manufacturer pin-description table to assign every signal and preserve the 20-TSSOP land pattern. Decoupling, reset, clock, programming, and exposed-test requirements should follow the S08P reference design, while firmware should be validated for startup, interrupt behavior, and peripheral timing.
This product page consolidates the manufacturer product information, distributor specifications, family relationships, and practical design guidance for engineers evaluating the MC9S08PL8SCTJ as an automotive-oriented 8-bit control device.
Аналоги без доработки для MC9S08PL8SCTJ — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC9S08PL8SCTJ (тот же форм-фактор и посадочное место).
Для этого товара нет аналогов без доработки.
Запросить аналогиMC9S08PL8SCTJ Максимальные параметры и электрические характеристики
| Product Type | 8-bit microcontroller |
| Series | S08PL |
| Maximum CPU Frequency | 20 MHz |
| Flash Memory | 8 KB |
| Program Memory Organization | 8K x 8 bits |
| ADC Resolution | 10 bits |
| Analog Comparator | Integrated |
| Timers | Flexible timer resources |
| Напряжение питания | 3.3 V / 5 V |
| Automotive Qualification | AEC-Q100 |
| Корпус | 20-TSSOP |
| Package Width | 4.40 mm |
| Тип монтажа | Surface Mount |
| Instruction Set | 8-bit S08 CISC |
| Core and Peripheral IP | Reusable S08 core and IP |
| Family Pin Compatibility | Pin-compatible S08P family |
| ESD and EFT Performance | Enhanced EFT/ESD performance |
| Статус жизненного цикла | Active |
Руководство по цоколевке MC9S08PL8SCTJ в корпусе 4.40 mm
Цоколевка для MC9S08PL8SCTJ (корпус 4.40 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MC9S08PL8SCTJ.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MC9S08PL8SCTJ подходит для 6 применениеs: Automotive Sensor Interface, Appliance Control Module, Industrial Sensor Node, Small Motor and Relay Control, LED Lighting Controller, Keypad and Human Interface Control.
Automotive Sensor Interface
The MC9S08PL8SCTJ fits compact automotive sensing subsystems that must acquire analog measurements and make embedded control decisions. Its 10-bit ADC supports sensor digitization, while the analog comparator can provide a fast threshold function independent of the main software path. The 20 MHz S08 core provides enough processing speed for signal conditioning, filtering, diagnostics, and communication tasks, while 8 KB of flash accommodates structured application code. AEC-Q100 qualification makes the device relevant for automotive programs, subject to the complete product qualification process. Designers should confirm channel availability, input limits, ADC timing, and automotive errata in the manufacturer documentation.
Рекомендуется
Appliance Control Module
The MC9S08PL8SCTJ is well suited to appliance controllers combining discrete inputs, analog sensing, timers, and compact user interfaces. An 8-bit S08 core running up to 20 MHz can execute motor sequencing, button logic, temperature decisions, and state-machine control without a higher-cost processor. The 10-bit ADC supports sensors such as temperature or level devices, and the analog comparator can provide simple threshold detection. Its 20-TSSOP package helps reduce board area in space-constrained products. The 8 KB flash capacity should be checked against code size, while the 3.3 V and 5 V operating options simplify interface planning across appliance subcircuits.
Рекомендуется
Industrial Sensor Node
The MC9S08PL8SCTJ can serve as the controller in a compact industrial sensor node where local measurement, filtering, thresholding, and status reporting are required. Its 10-bit ADC is suitable for many low- to moderate-resolution sensing tasks, while the comparator supports fast limit detection that reduces software polling frequency. The 8-bit architecture simplifies control logic for pumps, valves, relays, and condition-monitoring equipment, and the 8 KB flash provides room for calibration constants and diagnostic routines. Industrial deployments should verify operating-temperature limits, ESD and EFT behavior, isolation strategy, grounding, and I/O protection against the applicable system requirements.
Рекомендуется
Small Motor and Relay Control
The MC9S08PL8SCTJ fits small motor, solenoid, relay, and actuator-control boards that need deterministic sequencing and multiple timing functions. Its flexible timers can organize pulse generation, debounce timing, periodic maintenance tasks, and motor-step sequences, while the 20 MHz core provides ample headroom for a compact state machine. The ADC can monitor current, position, or analog feedback where the board provides suitable sensing circuitry. The 20-TSSOP package supports compact layouts, although motor environments require careful separation of power paths from sensitive analog and MCU grounding, plus protection appropriate to the load and wiring length.
Рекомендуется
LED Lighting Controller
The MC9S08PL8SCTJ can control compact LED lighting systems that require dimming, sequencing, status indication, or sensor-responsive behavior. Flexible timer resources can produce repeatable PWM-related timing or coordinate multiple lighting patterns, while the 10-bit ADC can support ambient-light or current-feedback measurements. Its modest 8-bit architecture and 8 KB flash fit straightforward lighting state machines without a larger embedded platform. The 20-TSSOP footprint helps minimize controller area, but the final design must account for LED-driver topology, switching-node layout, ground-current return, thermal performance, and any flicker requirement rather than treating the MCU pins as direct high-power LED outputs.
Рекомендуется
Keypad and Human Interface Control
The MC9S08PL8SCTJ is suitable for keypads, control panels, and small human-interface modules that combine button input with analog adjustment or status feedback. Timers can handle debounce and long-press detection, while the 10-bit ADC can read a potentiometer, joystick position, or resistive sensor network. The 8-bit S08 core supports straightforward menu and state-machine logic, and the compact 20-TSSOP package leaves board space for display or communication circuitry. Designers should use the manufacturer pin and alternate-function tables to assign shared pins, account for input leakage and debounce timing, and validate ESD protection for connectors that users may touch.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC9S08PL8SCTJ — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Brand | NXP Semiconductors |
| Package | 20-TSSOP |
| Product Type | 8-bit microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Flash Memory | 8 KB |
| Program Memory Organization | 8K x 8 bits |
| ADC Resolution | 10 bits |
| Analog Comparator | Integrated |
| Supply Voltage | 3.3 V / 5 V |
| Automotive Qualification | AEC-Q100 |
Ключевые отличия
- Combines automotive qualification with a streamlined S08P feature set (против MC9S08PL4CTG)
- Provides twice the program memory of the 4 KB S08P option (против MC9S08PL4CTG)
- Retains a compact 20-TSSOP package (против MC9S08SL8VTJ)
Заметки по проектированию
Use the manufacturer 20-TSSOP land pattern and pin-description table for the PCB footprint. Place the required input, output, and reference decoupling capacitors close to their associated power pins, with short return paths and a continuous ground plane. Confirm whether the selected package variant exposes a pad, then follow the specified thermal-copper and soldering recommendations. Do not route high-current motor or relay paths through the MCU ground area.
Do not treat every S08P member as electrically identical merely because the family is described as pin-compatible. Before migration, compare the exact flash and RAM capacity, ADC channels, timer resources, clock options, reset behavior, alternate functions, temperature grade, and package drawing. Program the new device with its correct support files and repeat startup, interrupt, timing, and peripheral tests because ordering suffixes can change qualification or packaging details.
Keep analog inputs away from switching nodes, relay contacts, motor windings, and high-current return paths. Use a quiet analog ground strategy only if the manufacturer reference design supports it, and route the ADC source with a short path and minimal loop area. Add external filtering when sensor outputs are slow or noisy, but account for the ADC sampling network and the resulting settling time. Check every I/O for contention before enabling an output or peripheral.
Budget the MCU supply rail for normal operation, analog conversion, and peripheral current across the full input-voltage range. A 5 V application should not assume that every 3.3 V signal is directly compatible, and a 3.3 V application should check I/O and ADC limits against the selected ordering option. Place bulk and local decoupling according to the manufacturer reference design, and keep regulator return currents out of sensitive analog traces.
Информация о соответствии
Distributor product information identifies the MC9S08PL8SCTJ as AEC-Q100 qualified. Other environmental and material compliance statuses are not established by the available manufacturer and distributor information.