MC9S12E128MFUE - 16-bit HCS12 MCU 128KB Flash 25MHz | NXP
Артикул: MC9S12E128MFUE ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $11.24 | $11,24 |
| 10 | $10.68 | $106,80 |
| 100 | $9.55 | $955,00 |
| 500 | $8.99 | $4.495,00 |
| 1.000 | $8.44 | $8.440,00 |
MC9S12E128MFUE Обзор
A microcontroller (MCU) is a single-chip computer that integrates a processor core, program memory, data memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters on one die. Within the semiconductor hierarchy, the MC9S12E128MFUE belongs to the 16-bit microcontroller class, within the broader HCS12/S12 product line from Freescale (now NXP), which itself descends from the 68HC11 legacy architecture widely used in automotive body electronics.
Key features include full 16-bit data paths throughout the core, 128KB (128K x 8) of on-chip FLASH for code storage, and an on-chip phase-locked loop (PLL) that lets designers trade clock frequency against power consumption dynamically. The device integrates an on-chip bandgap-based voltage regulator (Vreg), reducing external power components and improving supply robustness in noisy 12V automotive environments.
Technically, the S12E family emphasizes integration density over raw speed: the 25 MHz bus derives from a PLL multiplying a lower-frequency crystal or reference, allowing EMC-friendly operation at reduced frequencies when full performance is not required. The FLASH memory is reprogrammable in-system, supporting field firmware updates, and the peripheral set targets body control modules, sensor hubs, and actuator control nodes rather than high-throughput signal processing.
Typical applications include automotive body electronics such as door modules, seat control, lighting control, and HVAC actuators, as well as industrial control panels, motor-driven appliances, and general-purpose embedded systems where a robust 16-bit platform with adequate FLASH and mature toolchain support is preferred.
When designing with this device, plan bus frequency and PLL settings early, since EMC compliance at 25 MHz requires careful clock routing and decoupling. Note also that NXP lists this part as NRND (Not Recommended for New Designs), so new projects should evaluate successor S12G/S12XS devices or design-in alternatives with a migration plan.
This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design guidance not found in a single manufacturer datasheet, as of 2026-10-18.
Аналоги без доработки для MC9S12E128MFUE — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC9S12E128MFUE (тот же форм-фактор и посадочное место) — отличается по Program Memory Size, Package, Operating Temperature, RAM Size, Series.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC9S12DJ128MFUE
✅ Прямая замена✓ В наличии
$10.75 / шт.
Открыть даташит →S9S12B128F0MFUE
✅ Прямая замена✓ В наличии
$9.55 / шт.
Открыть даташит →MC9S12E256VFUE
✅ Прямая замена✓ В наличии
$8.57 / шт.
Открыть даташит →MC9S12E64MFUE
✅ Прямая замена✓ В наличии
$9.2 / шт.
Открыть даташит →MC9S12E128CFUE
✅ Прямая замена✓ В наличии
$10.65 / шт.
Открыть даташит →MC9S12C128MFUE
✅ Прямая замена✓ В наличии
$9.25 / шт.
Открыть даташит →MC9S12E128MFUE Максимальные параметры и электрические характеристики
| Core Processor | HCS12 |
| Core Size | 16-bit |
| Максимальная тактовая частота | 25 MHz |
| Program Memory Size | 128KB (128K x 8) FLASH |
| Series | S12E (Moray Eel) |
| Корпус / Типоразмер | 80-QFP (14x14 mm) |
| Тип монтажа | Surface Mount |
| Разрядность шины данных | 16 bit |
| PLL | On-chip phase-locked loop (frequency vs power adjustable) |
| Voltage Regulator | On-chip bandgap-based Vreg |
| Product Status | NRND (Not Recommended for New Designs) |
| Programmable | Not Verified |
| Packaging | Tray |
| Число выводов | 80 |
| Application Target | Automotive / general-purpose embedded control |
Руководство по цоколевке MC9S12E128MFUE в корпусе 80-qfp (14x14 mm)
Цоколевка для MC9S12E128MFUE (корпус 80-qfp (14x14 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MC9S12E128MFUE.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MC9S12E128MFUE подходит для 6 применениеs: Automotive Body Control Modules, Lighting and HVAC Actuator Control, Industrial Control Panels, Motor and Appliance Control, Sensor and Data Acquisition Nodes, Legacy System Maintenance and EOL Recovery.
Automotive Body Control Modules
The MC9S12E128MFUE fits automotive body control applications because NXP explicitly designed the S12E family to provide the on-chip features needed for automotive designs, including full 16-bit data paths and an integrated bandgap-based voltage regulator that tolerates the transients typical of 12V vehicle electrical systems. In a door module or body controller, the 128KB FLASH accommodates diagnostics, LIN/CAN-style communication stacks, and actuator scheduling code, while the 25 MHz HCS12 core with PLL gives headroom for interrupt-driven I/O scanning. Firmware can downshift the PLL frequency between active phases to cut consumption and emissions. Note the part is NRND, so this application is mainly for sustaining existing programs.
Рекомендуется
Lighting and HVAC Actuator Control
For lighting control and HVAC actuator nodes, the MC9S12E128MFUE offers a balance of code capacity and deterministic 16-bit control. The 128KB FLASH holds lamp-fault diagnostics, PWM dimming tables, and temperature compensation routines, while the PLL lets designers run the bus at a lower, EMC-friendly clock during analog measurement phases and step to the full 25 MHz for burst processing. The on-chip Vreg simplifies the power tree in cost-sensitive actuator modules by removing an external regulator. Because S12 I/O is 5V-tolerant style HCS12 I/O, it interfaces directly with discrete high-side drivers commonly used in lamp and blower circuits, reducing component count and board area.
Рекомендуется
Industrial Control Panels
In industrial control panels and machinery I/O boards, the MC9S12E128MFUE serves as a robust general-purpose controller: its 16-bit HCS12 core executes scan-cycle logic deterministically, and 128KB of in-system reprogrammable FLASH supports feature updates in the field without changing hardware. The PLL architecture permits lowering bus speed to reduce radiated emissions in cabinets with sensitive analog circuitry, and the integrated voltage regulator eases design with wide-tolerance industrial supplies. Engineers value the mature CodeWarrior toolchain and abundant S12 application notes for long-lifecycle industrial equipment, although new panel designs should weigh the NRND status against actively supported S12G devices before committing.
Рекомендуется
Motor and Appliance Control
White-goods and small-appliance controls benefit from the MC9S12E128MFUE's combination of 5V-class HCS12 I/O, 16-bit timers, and 128KB FLASH sufficient for motor commutation tables, user-interface logic, and safety interlock code in a single device. Running the core from the on-chip PLL allows trade-offs between torque-loop update rate and power consumption, and the bandgap-based Vreg keeps the core stable across household supply variations. The 80-QFP 14x14 mm package provides enough I/O for keypad matrices, displays, and sensor inputs without external port expanders. Consumer-grade temperature variants within the same footprint allow cost optimization for indoor appliance environments.
Рекомендуется
Sensor and Data Acquisition Nodes
The MC9S12E128MFUE works well as a sensor-hub or data-acquisition node because the S12 family integrates analog and timer peripherals around the 16-bit core, and the PLL can be throttled between sampling bursts to minimize self-heating that would drift analog measurements. The 128KB FLASH buffers calibration tables and logging structures, while full 16-bit data paths keep arithmetic on sensor values efficient without 8-bit multi-byte workarounds. In automotive sensor modules, the on-chip voltage regulator rejects supply ripple from the vehicle rail, improving measurement repeatability. The part's mature ecosystem of S12 ADC application notes shortens firmware development for ratiometric and averaged-sampling schemes.
Рекомендуется
Legacy System Maintenance and EOL Recovery
A growing use case for the MC9S12E128MFUE is sustaining and repairing legacy automotive and industrial equipment whose original designs specified the S12E family. Because NXP marks the part NRND, availability depends on distributor residual stock and broker channels, as reflected by Octopart's four-distributor listing. The pin-compatible S12 family members in the same 80-QFP footprint - MC9S12DJ128MFUE, S9S12B128F0MFUE, and MC9S12E256VFUE - allow board-level recovery without PCB redesign after firmware validation. Procurement teams should combine last-time-buy quantities with qualified second-source footprints to protect long-service-life fleets from future shortages.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC9S12E128MFUE — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC9S12DJ128MFUE | S9S12B128F0MFUE | MC9S12E256VFUE | MC9S12C128MFUE |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-QFP (14x14 mm) | 80-QFP (14x14 mm) | 80-QFP (14x14 mm) | 80-QFP (14x14 mm) | 80-QFP (14x14 mm) |
| Core / Architecture | HCS12, 16-bit | HCS12, 16-bit | HCS12, 16-bit | HCS12, 16-bit | HCS12, 16-bit |
| Program FLASH | 128KB | 128KB | 128KB | 256KB | 128KB |
| Family / Series | S12E (Moray Eel) | S12D | S12B | S12E (Moray Eel) | S12C |
| Peripheral Integration | General-purpose S12E set with PLL and on-chip Vreg | S12D enhanced peripheral set | S12B chassis/safety-oriented set | Identical S12E set | S12C cost-reduced set |
Ключевые отличия
- Cost-optimized S12E integration with on-chip Vreg (против MC9S12DJ128MFUE)
- Double the code capacity in the same footprint (против MC9S12E64MFUE)
- Extended automotive temperature grade (против MC9S12E128CFUE)
- Higher peripheral integration than cost-reduced family (против MC9S12C128MFUE)
Заметки по проектированию
The MC9S12E128MFUE integrates a bandgap-based voltage regulator (Vreg) per NXP's family description, so the internal core supply is generated on-chip from the 5V rail. Follow the datasheet's required external Vreg capacitor value and ESR range exactly; an undersized or high-ESR capacitor causes brown-out resets during FLASH erase/write, which draw current bursts. Estimated: budget additional margin on the 5V rail for FLASH programming current, since in-system programming raises average supply demand above run-mode levels.
The on-chip PLL is the main EMC lever on this device. Because NXP states that the PLL allows power consumption and performance to be adjusted, implement firmware-based frequency scaling: run the bus at reduced PLL multipliers during idle scanning and step to 25 MHz only for computation bursts. Keep the PLL loop filter components on short, guarded traces close to the device, and place a solid ground plane under the 80-QFP. Spread-spectrum-style frequency dithering is not a substitute for good clock routing at 25 MHz in automotive EMC chambers.
The most common lifecycle pitfall is ignoring the NRND status: NXP's product page lists MC9S12E128MFUE as Not Recommended for New Designs, so lead times and stock can change without notice. Before layout freeze, validate at least one same-footprint fallback (for example MC9S12DJ128MFUE or MC9S12E256VFUE) by compiling your firmware against its register map and running it on an evaluation board. Also verify the FUE suffix temperature grade when purchasing from brokers, since CFUE commercial-grade units are visually similar but not rated for extended automotive environments.
For the 80-QFP (14x14 mm) footprint, use 0.5 mm-pitch-compatible land patterns per the manufacturer's recommended layout in the S12E hardware design guidance, and fan out I/O on inner layers where possible to keep top-layer trace lengths short. Place 100 nF decoupling capacitors at opposite corners of the package in addition to the supply-pair bulk capacitance, minimizing loop area between each VDD/VSS pair. Keep crystal and PLL filter traces under 15 mm and away from switching loads such as driver transistors.
Информация о соответствии
Compliance status not stated in the provided web data. NXP product page includes an Environmental Quality section - confirm RoHS/REACH certificates directly on nxp.com/part/MC9S12E128MFUE before production sourcing.