MC9S12XEQ384CAG - 16-bit 50MHz MCU 384KB Flash | NXP
Артикул: MC9S12XEQ384CAG ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
MC9S12XEQ384CAG Обзор
A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals into one device, forming the lowest tier of the embedded processing hierarchy that spans MCUs, microprocessors, and application processors. The HCS12X family from NXP (formerly Freescale) is a CISC-based 16-bit architecture widely deployed in industrial and automotive embedded control.
Key features of the MC9S12XEQ384CAG include the XGATE co-processor, a separate RISC core that offloads interrupt handling and I/O processing to build virtual peripherals and boost overall system throughput. It also provides a flexible, programmable hardware-emulated EEPROM, a memory protection unit (MPU) with supervisor and user modes for system integrity, a 12-bit ADC with 3 us conversion time, an enhanced capture timer (ECT), a periodic interrupt timer (PIT), and a real-time interrupt (RTI).
Architecturally, the S12X CPU executes the HCS12X instruction set with additional indexed addressing modes, while the XGATE runs concurrently at the bus clock, allowing deterministic real-time response on the main core. The memory map supports paged Flash beyond the linear 16-bit address space, and the dual-core topology enables peripheral processing without stealing main-core cycles.
Typical applications include industrial automation and motor control nodes, body and comfort modules in vehicles, building control systems, and general embedded control projects requiring CAN connectivity and robust 5V operation over an industrial temperature range of -40C to +85C (TA).
Design considerations: verify the exact supply voltage domains (core and I/O rails) and ADC reference configuration against the manufacturer datasheet before board design, and budget for the hardware-emulated EEPROM endurance limits in write-intensive applications.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Аналоги без доработки для MC9S12XEQ384CAG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC9S12XEQ384CAG (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, Supply Voltage, Core Architecture, ADC.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC9S12XEQ512CAG
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$14.4 / шт.
Открыть даташит →MC9S12XEQ384CAG Максимальные параметры и электрические характеристики
| Core Processor | HCS12X (16-bit CISC) |
| Core Size | 16-bit |
| Bus Speed | 50 MHz |
| Co-processor | XGATE RISC co-processor |
| Flash Memory | 384 KB (384K x 8) |
| RAM Size | 24K x 8 |
| EEPROM | Hardware-emulated EEPROM (programmable, flexible) |
| ADC Resolution | 12-bit |
| ADC Conversion Time | 3 us |
| Timers | Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real Time Interrupt (RTI) |
| Memory Protection | MPU with supervisor/user modes |
| Рабочая температура | -40C to +85C (TA) |
| Тип монтажа | Surface Mount |
| Корпус | 144-LQFP (20x20 mm) |
| Packaging | Tray |
| Lifecycle Stage | Active |
Руководство по цоколевке MC9S12XEQ384CAG в корпусе 144-lqfp (20x20 mm)
Цоколевка для MC9S12XEQ384CAG (корпус 144-lqfp (20x20 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MC9S12XEQ384CAG.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MC9S12XEQ384CAG подходит для 6 применениеs: Industrial Automation and Motor Control, Automotive Body and Comfort Modules, Building Control and HVAC Systems, CAN Networked Embedded Gateways, Embedded Control Projects and Prototyping, Test and Measurement Instrumentation.
Industrial Automation and Motor Control
The MC9S12XEQ384CAG fits industrial automation nodes where deterministic 16-bit control and robust I/O matter more than raw processing power. Its 50 MHz HCS12X core runs motor control and sequencing loops deterministically, while the XGATE co-processor services CAN and serial interrupts independently, protecting control-loop jitter. The 12-bit ADC with 3 us conversion time samples current and voltage feedback fast enough for closed-loop motor drives, and the enhanced capture timer (ECT) handles encoder and PWM timing. Placed on a 5 V industrial board operating from -40C to +85C, the MCU consolidates Flash, RAM, emulated EEPROM, and CAN in one 144-LQFP device, reducing BOM count versus a discrete MCU-plus-EEPROM-plus-CAN-controller design.
Рекомендуется
Automotive Body and Comfort Modules
Body control modules, door modules, and comfort controllers are classic HCS12X applications, and the MC9S12XEQ384CAG aligns well with their requirements. The 384 KB Flash holds full diagnostic stacks and lighting or lock control logic, while the memory protection unit with supervisor and user modes supports system-integrity partitioning demanded by vehicle platforms. The hardware-emulated EEPROM stores calibration and learned values (mirror positions, keyless settings) without an external EEPROM. The XGATE co-processor handles LIN/CAN message traffic and wake-up sources so the main core maintains real-time lamp and load control. The 12-bit, 3 us ADC reads potentiometer and current-sense inputs across the -40C to +85C automotive ambient range.
Рекомендуется
Building Control and HVAC Systems
The MC9S12XEQ384CAG suits building controllers, HVAC boards, and gateway nodes that need long-life 5 V reliability and network connectivity. Its 50 MHz bus executes PID control loops for dampers, valves, and fan drives, while the periodic interrupt timer (PIT) and real-time interrupt (RTI) provide the time bases scheduling and time-stamping tasks require. The 384 KB Flash accommodates protocol stacks such as BACnet or Modbus variants, and the emulated EEPROM keeps configuration and setpoints across power cycles. The 12-bit ADC digitizes temperature, humidity, and pressure sensor inputs with 3 us conversions, enabling multi-zone control from a single 144-LQFP MCU without external data converters.
Рекомендуется
CAN Networked Embedded Gateways
The MC9S12XEQ384CAG works well as a protocol gateway between CAN-based industrial or vehicle subnetworks. The XGATE co-processor offloads CAN frame reception, filtering, and forwarding entirely from the S12X main core, so translation logic runs without interrupt latency on the application processor, a key benefit at high bus loads. The 384 KB Flash and 24 KB RAM provide room for routing tables, diagnostic (UDS-style) handlers, and logging buffers, while the MPU with supervisor/user modes isolates the protocol stack from application code. The 50 MHz bus keeps frame-store copy operations fast, and the emulated EEPROM retains gateway configuration across power interruptions in the field.
Рекомендуется
Embedded Control Projects and Prototyping
For general embedded control projects, the MC9S12XEQ384CAG offers an approachable path: classic 5 V tolerant I/O, a well-documented 16-bit architecture, and mature CodeWarrior tooling with BDM debugging. The 384 KB Flash is large enough for substantial firmware without external memory, and hardware-emulated EEPROM removes an external storage device from prototype boards. The enhanced capture timer (ECT) supports PWM generation and input capture for hobby-scale robotics, test rigs, and instrumentation. The 12-bit, 3 us ADC covers most analog sensor needs directly, and the 144-LQFP package offers generous I/O expansion for prototypes that later migrate to smaller XEQ family pin variants in production.
Рекомендуется
Test and Measurement Instrumentation
Bench instruments, data loggers, and industrial measurement devices benefit from the MC9S12XEQ384CAG combination of deterministic timing and integrated analog capture. The enhanced capture timer (ECT) provides input capture and output compare channels for period and frequency measurement, while the 12-bit ADC with 3 us conversion time streams multi-channel measurements without an external converter. The 384 KB Flash stores acquisition firmware, calibration tables, and display logic, and the emulated EEPROM retains calibration data across servicing cycles. The XGATE co-processor manages the user-interface and communication interrupts (SCI, SPI, CAN), keeping acquisition timing on the main core jitter-free across the -40C to +85C range.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC9S12XEQ384CAG — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC9S12XEQ512CAG |
|---|---|---|
| Package | 144-LQFP (20x20 mm) | 144-LQFP (20x20 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Core | HCS12X 16-bit + XGATE | HCS12X 16-bit + XGATE |
| Bus Speed | 50 MHz | 50 MHz |
| Flash | 384 KB | 512 KB |
| RAM | 24 KB | 24 KB |
| ADC | 12-bit, 3 us | 12-bit, 3 us |
Ключевые отличия
- Hardware-emulated EEPROM removes external EEPROM from BOM (против MC9S12XDP512MAG)
- MPU with supervisor/user modes for system integrity (против MC9S12XDP512MAG)
- Flash headroom option without redesign (против MC9S12XEQ512CAG)
Заметки по проектированию
The S12XE family runs from a nominal 5 V supply with internal regulation for the core; confirm the exact VDD/VDDX/VDDR rail architecture and decoupling network in the NXP S12XE reference manual before layout. Place 100 nF ceramic decoupling capacitors at each supply pin pair plus bulk capacitance near the regulator. Estimated: at 50 MHz bus with heavy XGATE loading, expect core current in the tens of milliamps range, so size the 5 V rail regulator with margin for I/O source current on all 100+ port pins.
Do not substitute the MC9S12XEQ384MAL for this part: it uses a 112-pin LQFP and is not pin-compatible despite identical core specifications. Also remember that the hardware-emulated EEPROM consumes a Flash partition - partition sizes set in software change the effective Flash available for code, so budget endurance and partition sizing early. Flash programming/erase voltages and sector granularity differ between emulated EEPROM and program Flash; consult the reference manual chapter on D-Flash/EEE rather than assuming uniform Flash behavior.
For the 144-LQFP (20x20 mm), use a standard 0.5 mm pitch LQFP land pattern per the package outline in the manufacturer datasheet. Route the crystal circuit with short traces and guard with ground, since the 50 MHz PLL-based clocking is sensitive to layout; keep the PLL loop filter components close to the device. Provide solid ground pour under the part and stitch vias around the CAN and SPI routing to limit EMI on the multiplexed I/O ring.
Информация о соответствии
The NXP product page includes an Environmental Quality section; exact RoHS/REACH documentation should be downloaded from nxp.com/part/MC9S12XEQ384CAG for the regulatory file.
