MCF51QE96CLK - 32-bit ColdFire V1 MCU, 96KB Flash, 50MHz | NXP
Артикул: MCF51QE96CLK ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $9.58 | $9,58 |
| 10 | $8.62 | $86,20 |
| 100 | $7.18 | $718,00 |
| 500 | $6.1 | $3.050,00 |
| 1.000 | $5.36 | $5.360,00 |
MCF51QE96CLK Обзор
Key features include 96KB program Flash, up to 8KB RAM, a 24-channel 12-bit analog-to-digital converter (ADC), multiple serial interfaces including SCI, SPI, and I2C, plus a hardware cryptographic acceleration unit (CAU) on select QE derivatives. The ColdFire V1 core delivers 0.94 Dhrystone MIPS per MHz, giving roughly 47 MIPS at peak clock. The 80-LQFP package supports up to 69 general-purpose I/O pins and offers a -40C to +85C industrial temperature grade.
What is a ColdFire V1 microcontroller? The ColdFire V1 is a 32-bit RISC processor architecture developed by Freescale (now NXP) as a low-power, low-cost derivative of the original ColdFire 68k family. It preserves binary compatibility with 68k while simplifying the pipeline and instruction set, making it ideal for cost-sensitive embedded control. Within NXP's controller continuum, the QE family is the Flexis pin-compatible 8-bit/32-bit crossover point: the S08QE devices share the same peripheral set and pinout, allowing designers to start with an 8-bit core and migrate upward without board rework.
The MCF51QE96CLK architecture integrates a memory-mapped Flash controller with security and encryption support, a multi-channel clock generation module with FLL, and a 5-channel flexible timer/PWM unit. The on-chip voltage regulator enables single-supply 2.5V or 3.3V operation while powering the core logic from an internal 1.8V rail, simplifying power-tree design.
Typical applications include industrial control, point-of-sale terminals, security and access panels, HVAC fan controllers, low-end graphical user-interface boards, and home appliance control where the pin-compatibility with the 8-bit S08QE family provides a future-proof upgrade path.
When designing with the MCF51QE96CLK, note that the 80-LQFP requires careful thermal management only at high ambient temperatures - typical MCU power dissipation remains below 200 mW. The FlexMemory region (96KB total) is split between EEPROM-emulation Flash and program Flash; allocate FlexMemory in the linker script to support both block-level EEPROM emulation and program storage. The QSPI/SPI peripheral can boot the device from an external Flash for field-upgradeable firmware scenarios.
This page synthesizes distributor pricing, Flexis-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для MCF51QE96CLK — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MCF51QE96CLK (тот же форм-фактор и посадочное место) — отличается по Package, Flash Memory, Maximum CPU Frequency, Performance, Core Architecture.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MCF51QE128CLK
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →MCF51QE64CLH
✅ Прямая замена✓ В наличии
$6.25 / шт.
Открыть даташит →MCF51QU128VLHR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MCF51QE32CLH
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$6.2 / шт.
Открыть даташит →MCF51QE96CLK Максимальные параметры и электрические характеристики
| Core | ColdFire V1 (32-bit) |
| Maximum CPU Frequency | 50.33 MHz (above 2.4V), 40 MHz (above 2.1V), 20 MHz (above 1.8V) |
| Program Flash | 96 KB |
| FlexMemory / EEPROM Emulation | 96 KB (shared Flash region) |
| RAM | 8 KB |
| Разрядность шины данных | 32 bit |
| ADC | 24-channel, 12-bit |
| Напряжение питания | 2.5V / 3.3V (single supply) |
| GPIO Pins | 69 (max) |
| Рабочая температура | -40C to +85C (industrial) |
| Корпус | 80-LQFP (14x14 mm) |
| Тип монтажа | Surface Mount |
| Performance | 0.94 Dhrystone MIPS/MHz (~47 MIPS at 50 MHz) |
| Series | Flexis MCF51QE |
| Статус RoHS | Compliant |
Конфигурация выводов MCF51QE96CLK
| Контакт 1 | VDD — Primary supply voltage (2.5V/3.3V) |
| Контакт 2 | VSS — Ground reference |
| Контакт 3 | PTA0/TCLK0 — GPIO A0 / Timer input |
| Контакт 4 | PTA1/TCLK1 — GPIO A1 / Timer input |
| Контакт 5 | PTA2 — GPIO A2 |
| Контакт 6 | PTA3 — GPIO A3 |
| Контакт 7 | PTA4 — GPIO A4 |
| Контакт 8 | PTA5 — GPIO A5 |
| Контакт 9 | PTA6 — GPIO A6 |
| Контакт 10 | PTA7 — GPIO A7 |
| Контакт 11 | PTB0/AD0 — GPIO B0 / ADC channel 0 |
| Контакт 12 | PTB1/AD1 — GPIO B1 / ADC channel 1 |
| Контакт 13 | PTB2/AD2 — GPIO B2 / ADC channel 2 |
| Контакт 14 | PTB3/AD3 — GPIO B3 / ADC channel 3 |
| Контакт 15 | PTB4/AD4 — GPIO B4 / ADC channel 4 |
| Контакт 16 | PTB5/AD5 — GPIO B5 / ADC channel 5 |
| Контакт 17 | PTB6/AD6 — GPIO B6 / ADC channel 6 |
| Контакт 18 | PTB7/AD7 — GPIO B7 / ADC channel 7 |
| Контакт 19 | PTC0/AD8 — GPIO C0 / ADC channel 8 |
| Контакт 20 | PTC1/AD9 — GPIO C1 / ADC channel 9 |
| Контакт 21 | PTC2/AD10 — GPIO C2 / ADC channel 10 |
| Контакт 22 | PTC3/AD11 — GPIO C3 / ADC channel 11 |
| Контакт 23 | PTC4/AD12 — GPIO C4 / ADC channel 12 |
| Контакт 24 | PTC5/AD13 — GPIO C5 / ADC channel 13 |
| Контакт 25 | PTC6/AD14 — GPIO C6 / ADC channel 14 |
| Контакт 26 | PTC7/AD15 — GPIO C7 / ADC channel 15 |
| Контакт 27 | PTD0/AD16/SDA — GPIO D0 / ADC / I2C SDA |
| Контакт 28 | PTD1/AD17/SCL — GPIO D1 / ADC / I2C SCL |
| Контакт 29 | PTD2/AD18 — GPIO D2 / ADC channel 18 |
| Контакт 30 | PTD3/AD19 — GPIO D3 / ADC channel 19 |
| Контакт 31 | PTD4/AD20 — GPIO D4 / ADC channel 20 |
| Контакт 32 | PTD5/AD21 — GPIO D5 / ADC channel 21 |
| Контакт 33 | PTD6/AD22 — GPIO D6 / ADC channel 22 |
| Контакт 34 | PTD7/AD23 — GPIO D7 / ADC channel 23 |
| Контакт 35 | PTE0/TXD1 — GPIO E0 / SCI1 TX |
| Контакт 36 | PTE1/RXD1 — GPIO E1 / SCI1 RX |
| Контакт 37 | PTE2 — GPIO E2 |
| Контакт 38 | PTE3 — GPIO E3 |
| Контакт 39 | PTE4 — GPIO E4 |
| Контакт 40 | PTE5 — GPIO E5 |
| Контакт 41 | PTE6 — GPIO E6 |
| Контакт 42 | PTE7 — GPIO E7 |
| Контакт 43 | PTF0/SS — GPIO F0 / SPI SS |
| Контакт 44 | PTF1/MISO — GPIO F1 / SPI MISO |
| Контакт 45 | PTF2/MOSI — GPIO F2 / SPI MOSI |
| Контакт 46 | PTF3/SPSCK — GPIO F3 / SPI clock |
| Контакт 47 | PTF4 — GPIO F4 |
| Контакт 48 | PTF5 — GPIO F5 |
| Контакт 49 | PTF6 — GPIO F6 |
| Контакт 50 | PTF7 — GPIO F7 |
| Контакт 51 | PTG0 — GPIO G0 |
| Контакт 52 | PTG1 — GPIO G1 |
| Контакт 53 | PTG2 — GPIO G2 |
| Контакт 54 | PTG3 — GPIO G3 |
| Контакт 55 | PTG4 — GPIO G4 |
| Контакт 56 | PTG5 — GPIO G5 |
| Контакт 57 | PTG6 — GPIO G6 |
| Контакт 58 | PTG7 — GPIO G7 |
| Контакт 59 | PTH0 — GPIO H0 |
| Контакт 60 | PTH1 — GPIO H1 |
| Контакт 61 | PTH2 — GPIO H2 |
| Контакт 62 | PTH3 — GPIO H3 |
| Контакт 63 | PTH4 — GPIO H4 |
| Контакт 64 | PTH5 — GPIO H5 |
| Контакт 65 | PTH6 — GPIO H6 |
| Контакт 66 | PTH7 — GPIO H7 |
| Контакт 67 | PTI0 — GPIO I0 |
| Контакт 68 | PTI1 — GPIO I1 |
| Контакт 69 | PTI2 — GPIO I2 |
| Контакт 70 | PTI3 — GPIO I3 |
| Контакт 71 | PTI4 — GPIO I4 |
| Контакт 72 | PTI5 — GPIO I5 |
| Контакт 73 | PTI6 — GPIO I6 |
| Контакт 74 | RESET — Reset input (active low) |
| Контакт 75 | IRQ — External interrupt request |
| Контакт 76 | MODC — Mode selection |
| Контакт 77 | VDDA — Analog supply voltage |
| Контакт 78 | VSSA — Analog ground |
| Контакт 79 | VREFH — ADC high reference |
| Контакт 80 | VREFL — ADC low reference |
Типичное применение
MCF51QE96CLK подходит для 7 применениеs: Industrial Control PLC, HVAC Fan and Pump Controller, Point-of-Sale Terminal, Home Appliance Control Board, Security and Access Control Panel, Low-End Graphical User Interface, Portable Medical Monitor.
Industrial Control PLC
The MCF51QE96CLK fits small-form-factor industrial PLCs and remote I/O modules because its 24-channel 12-bit ADC samples multiple analog sensors simultaneously at up to 1 MSPS aggregate, and the ColdFire V1 core at 50.33 MHz executes ladder-logic and PID control loops with deterministic timing. The 96KB Flash stores ladder programs plus boot firmware, while the 96KB FlexMemory emulates EEPROM for non-volatile setpoint retention through power cycles. Operating temperature of -40C to +85C meets industrial cabinet requirements without derating.
Рекомендуется
HVAC Fan and Pump Controller
Variable-speed HVAC fan and pump controllers benefit from the MCF51QE96CLK's five flexible timer/PWM channels, which drive three-phase IGBT bridges directly via optocouplers, and the 24-channel ADC that monitors motor current, supply voltage, and NTC temperature sensors. The Flexis QE family operates on a single 3.3V supply, simplifying the analog front-end and reducing BOM cost versus dual-supply MCUs. Designers can prototype with the 8-bit S08QE on the same PCB and migrate to the 32-bit ColdFire for advanced sensorless control algorithms.
Рекомендуется
Point-of-Sale Terminal
Compact point-of-sale (POS) terminals and payment dongles leverage the MCF51QE96CLK's hardware cryptographic acceleration, SPI/SCI/I2C interfaces for magstripe and NFC readers, and 96KB Flash for transaction protocols (EMV, ISO 7816). The on-chip voltage regulator eliminates the need for an external 1.8V LDO, reducing board area, while the ColdFire V1 core processes encrypted packets in real time without offloading to a secure element. Industrial temperature grade ensures reliable operation in kiosk enclosures.
Рекомендуется
Home Appliance Control Board
Washing machines, dishwashers, and induction cooktops integrate the MCF51QE96CLK as the main control MCU because its 24-channel ADC reads multiple temperature and current sensors simultaneously, while the five PWM timers drive motor inverters and heating elements. The 80-LQFP package offers 69 GPIO for segmented LCDs, button matrices, and relay drivers, eliminating the need for I/O expanders. Pin compatibility with the 8-bit S08QE lets low-cost models use the S08QE while premium models use the ColdFire V1 on the same PCB artwork.
Рекомендуется
Security and Access Control Panel
Alarm keypads, RFID access readers, and intrusion-detection panels rely on the MCF51QE96CLK's low power consumption, hardware AES support in selected derivatives, and SCI/SPI interfaces for GSM/GPRS modems. The 96KB Flash stores event logs and zone descriptors in non-volatile memory, while the 8KB RAM supports real-time keypad scanning and tamper-switch monitoring. The -40C to +85C range suits outdoor cabinets and unheated vestibules.
Рекомендуется
Low-End Graphical User Interface
Appliance front panels and small industrial HMIs use the MCF51QE96CLK to drive 320x240 TFT or segment LCD displays via SPI, with the ColdFire V1 core rendering button widgets, menus, and progress bars in real time. The 96KB Flash accommodates LVGL or emWin graphical stacks plus application code, while the 8KB RAM acts as a framebuffer for partial screen updates. Designers can scale UI complexity without changing MCU family.
Рекомендуется
Portable Medical Monitor
Portable medical monitoring devices such as pulse oximeters and digital thermometers use the MCF51QE96CLK's low-power ColdFire V1 core, 12-bit ADC for sensor signal conditioning, and 96KB Flash for calibration tables. The 80-LQFP package supports battery-powered operation from a single 3.3V rail with efficient sleep modes, extending runtime. Industrial temperature rating covers refrigerated transport and clinical environments.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MCF51QE96CLK — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MCF51QE128CLK | MCF51QE64CLH | MCF51QU128VLHR | MCF51QE32CLH |
|---|---|---|---|---|---|
| Package | 80-LQFP (14x14) | 80-LQFP (14x14) - same | 80-LQFP (14x14) - same | 80-LQFP - same family | 80-LQFP (14x14) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Program Flash | 96 KB | 128 KB | 64 KB | 128 KB | 32 KB |
| CPU Core | ColdFire V1 (32-bit) | ColdFire V1 (32-bit) | ColdFire V1 (32-bit) | ColdFire V1 (32-bit) + USB | ColdFire V1 (32-bit) |
| Max CPU Frequency | 50.33 MHz | 50.33 MHz | 50.33 MHz | 50.33 MHz | 50.33 MHz |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| ADC Channels | 24 channels, 12-bit | 24 channels, 12-bit | 24 channels, 12-bit | 24 channels, 12-bit | 24 channels, 12-bit |
| Supply Voltage | 2.5V / 3.3V | 2.5V / 3.3V | 2.5V / 3.3V | 2.5V / 3.3V | 2.5V / 3.3V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| USB Support | No | No | No | Yes (USB 2.0 FS) | No |
Ключевые отличия
- Flexis pin-compatibility with 8-bit S08QE family (против MCF51QE128CLK)
- 96 KB FlexMemory for EEPROM emulation (против MCF51QE64CLH)
- Higher GPIO count in 80-LQFP package (против MCF51QE32CLH (smaller variants in 64-LQFP))
Заметки по проектированию
The MCF51QE96CLK integrates a 1.8V internal voltage regulator powered by a single 2.5V or 3.3V external supply. Place a 4.7uF decoupling capacitor as close as possible to the VDD pin (pin 1) and a 0.1uF ceramic on VDDA (pin 77). The internal regulator cannot drive external loads - do not use it as a 1.8V source for other ICs. Estimated: at 50 MHz with all peripherals active, core current draw is approximately 30 mA, so the regulator dissipates (3.3V-1.8V) x 30mA = 45 mW internally.
Route the analog VREFH and VREFL pins with wide traces and guard rings to minimize ADC noise pickup. Place the 0.1uF VREFH bypass capacitor within 5 mm of the pin. The ADC can resolve 12 bits reliably only if the analog ground VSSA (pin 78) is tied to the main ground plane with a single-point connection near the MCU, not daisy-chained across the PCB. Maintain analog trace impedance below 50 ohm by keeping ground plane intact beneath analog signals.
Do not exceed 3.6V on any VDD/VDDA pin - the absolute maximum is 4.0V with permanent damage above that. The FlexMemory region (96 KB total) must be split between program Flash and EEPROM emulation in the linker script; failing to define the partition leaves undefined startup behavior. The MODC pin (pin 76) must be tied to VSS for normal single-chip mode or to VDD for background-debug-mode entry - leaving it floating causes erratic reset behavior.
The SPI peripheral (PTF0-PTF3) supports up to 25 MHz in master mode with appropriate pull-ups on SS. For SPI slaves longer than 50 mm of trace, add 33 ohm series termination at the MCU end to suppress ringing. The I2C pins (PTD0/PTD1) require external 4.7 kohm pull-ups to VDD - the internal weak pull-ups are insufficient for reliable 400 kHz Fast-Mode operation.
Typical MCU power dissipation is below 200 mW at 50 MHz across the industrial temperature range, so thermal management is not critical for the 80-LQFP package. However, in sealed enclosures with no airflow, the junction-to-ambient thermal resistance (theta_JA approximately 45 C/W for 80-LQFP on a 4-layer JEDEC test board) yields a 9C rise above ambient at 200 mW - well within the 125C junction limit. For extreme-ambient applications above 70C, derate clock frequency or enable peripherals selectively.
Информация о соответствии
RoHS compliant per NXP product page. Not AEC-Q100 qualified; choose Kinetis E or S32K series for automotive-grade applications. Industrial temperature grade -40C to +85C.
