MCF51QE96CLK - 32-bit ColdFire V1 MCU, 96KB Flash, 50MHz | NXP
Référence : MCF51QE96CLK ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $9.58 | $9,58 |
| 10 | $8.62 | $86,20 |
| 100 | $7.18 | $718,00 |
| 500 | $6.1 | $3 050,00 |
| 1 000 | $5.36 | $5 360,00 |
MCF51QE96CLK Présentation
Key features include 96KB program Flash, up to 8KB RAM, a 24-channel 12-bit analog-to-digital converter (ADC), multiple serial interfaces including SCI, SPI, and I2C, plus a hardware cryptographic acceleration unit (CAU) on select QE derivatives. The ColdFire V1 core delivers 0.94 Dhrystone MIPS per MHz, giving roughly 47 MIPS at peak clock. The 80-LQFP package supports up to 69 general-purpose I/O pins and offers a -40C to +85C industrial temperature grade.
What is a ColdFire V1 microcontroller? The ColdFire V1 is a 32-bit RISC processor architecture developed by Freescale (now NXP) as a low-power, low-cost derivative of the original ColdFire 68k family. It preserves binary compatibility with 68k while simplifying the pipeline and instruction set, making it ideal for cost-sensitive embedded control. Within NXP's controller continuum, the QE family is the Flexis pin-compatible 8-bit/32-bit crossover point: the S08QE devices share the same peripheral set and pinout, allowing designers to start with an 8-bit core and migrate upward without board rework.
The MCF51QE96CLK architecture integrates a memory-mapped Flash controller with security and encryption support, a multi-channel clock generation module with FLL, and a 5-channel flexible timer/PWM unit. The on-chip voltage regulator enables single-supply 2.5V or 3.3V operation while powering the core logic from an internal 1.8V rail, simplifying power-tree design.
Typical applications include industrial control, point-of-sale terminals, security and access panels, HVAC fan controllers, low-end graphical user-interface boards, and home appliance control where the pin-compatibility with the 8-bit S08QE family provides a future-proof upgrade path.
When designing with the MCF51QE96CLK, note that the 80-LQFP requires careful thermal management only at high ambient temperatures - typical MCU power dissipation remains below 200 mW. The FlexMemory region (96KB total) is split between EEPROM-emulation Flash and program Flash; allocate FlexMemory in the linker script to support both block-level EEPROM emulation and program storage. The QSPI/SPI peripheral can boot the device from an external Flash for field-upgradeable firmware scenarios.
This page synthesizes distributor pricing, Flexis-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Alternatives de remplacement direct pour MCF51QE96CLK — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MCF51QE96CLK (même facteur de forme et même empreinte) — différant par Package, Flash Memory, Maximum CPU Frequency, Performance, Core Architecture.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MCF51QE128CLK
✅ Remplacement direct✓ En stock
Contactez-nous pour le prix
Voir la fiche technique →MCF51QE64CLH
✅ Remplacement direct✓ En stock
$6.25 / unité
Voir la fiche technique →MCF51QU128VLHR
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MCF51QE32CLH
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$6.2 / unité
Voir la fiche technique →MCF51QE96CLK Valeurs maximales et caractéristiques électriques
| Core | ColdFire V1 (32-bit) |
| Maximum CPU Frequency | 50.33 MHz (above 2.4V), 40 MHz (above 2.1V), 20 MHz (above 1.8V) |
| Program Flash | 96 KB |
| FlexMemory / EEPROM Emulation | 96 KB (shared Flash region) |
| RAM | 8 KB |
| Largeur du bus de données | 32 bit |
| ADC | 24-channel, 12-bit |
| Tension d'alimentation | 2.5V / 3.3V (single supply) |
| GPIO Pins | 69 (max) |
| Température de fonctionnement | -40C to +85C (industrial) |
| Boîtier | 80-LQFP (14x14 mm) |
| Type de montage | Surface Mount |
| Performance | 0.94 Dhrystone MIPS/MHz (~47 MIPS at 50 MHz) |
| Series | Flexis MCF51QE |
| Statut RoHS | Compliant |
Configuration des broches de MCF51QE96CLK
| Broche 1 | VDD — Primary supply voltage (2.5V/3.3V) |
| Broche 2 | VSS — Ground reference |
| Broche 3 | PTA0/TCLK0 — GPIO A0 / Timer input |
| Broche 4 | PTA1/TCLK1 — GPIO A1 / Timer input |
| Broche 5 | PTA2 — GPIO A2 |
| Broche 6 | PTA3 — GPIO A3 |
| Broche 7 | PTA4 — GPIO A4 |
| Broche 8 | PTA5 — GPIO A5 |
| Broche 9 | PTA6 — GPIO A6 |
| Broche 10 | PTA7 — GPIO A7 |
| Broche 11 | PTB0/AD0 — GPIO B0 / ADC channel 0 |
| Broche 12 | PTB1/AD1 — GPIO B1 / ADC channel 1 |
| Broche 13 | PTB2/AD2 — GPIO B2 / ADC channel 2 |
| Broche 14 | PTB3/AD3 — GPIO B3 / ADC channel 3 |
| Broche 15 | PTB4/AD4 — GPIO B4 / ADC channel 4 |
| Broche 16 | PTB5/AD5 — GPIO B5 / ADC channel 5 |
| Broche 17 | PTB6/AD6 — GPIO B6 / ADC channel 6 |
| Broche 18 | PTB7/AD7 — GPIO B7 / ADC channel 7 |
| Broche 19 | PTC0/AD8 — GPIO C0 / ADC channel 8 |
| Broche 20 | PTC1/AD9 — GPIO C1 / ADC channel 9 |
| Broche 21 | PTC2/AD10 — GPIO C2 / ADC channel 10 |
| Broche 22 | PTC3/AD11 — GPIO C3 / ADC channel 11 |
| Broche 23 | PTC4/AD12 — GPIO C4 / ADC channel 12 |
| Broche 24 | PTC5/AD13 — GPIO C5 / ADC channel 13 |
| Broche 25 | PTC6/AD14 — GPIO C6 / ADC channel 14 |
| Broche 26 | PTC7/AD15 — GPIO C7 / ADC channel 15 |
| Broche 27 | PTD0/AD16/SDA — GPIO D0 / ADC / I2C SDA |
| Broche 28 | PTD1/AD17/SCL — GPIO D1 / ADC / I2C SCL |
| Broche 29 | PTD2/AD18 — GPIO D2 / ADC channel 18 |
| Broche 30 | PTD3/AD19 — GPIO D3 / ADC channel 19 |
| Broche 31 | PTD4/AD20 — GPIO D4 / ADC channel 20 |
| Broche 32 | PTD5/AD21 — GPIO D5 / ADC channel 21 |
| Broche 33 | PTD6/AD22 — GPIO D6 / ADC channel 22 |
| Broche 34 | PTD7/AD23 — GPIO D7 / ADC channel 23 |
| Broche 35 | PTE0/TXD1 — GPIO E0 / SCI1 TX |
| Broche 36 | PTE1/RXD1 — GPIO E1 / SCI1 RX |
| Broche 37 | PTE2 — GPIO E2 |
| Broche 38 | PTE3 — GPIO E3 |
| Broche 39 | PTE4 — GPIO E4 |
| Broche 40 | PTE5 — GPIO E5 |
| Broche 41 | PTE6 — GPIO E6 |
| Broche 42 | PTE7 — GPIO E7 |
| Broche 43 | PTF0/SS — GPIO F0 / SPI SS |
| Broche 44 | PTF1/MISO — GPIO F1 / SPI MISO |
| Broche 45 | PTF2/MOSI — GPIO F2 / SPI MOSI |
| Broche 46 | PTF3/SPSCK — GPIO F3 / SPI clock |
| Broche 47 | PTF4 — GPIO F4 |
| Broche 48 | PTF5 — GPIO F5 |
| Broche 49 | PTF6 — GPIO F6 |
| Broche 50 | PTF7 — GPIO F7 |
| Broche 51 | PTG0 — GPIO G0 |
| Broche 52 | PTG1 — GPIO G1 |
| Broche 53 | PTG2 — GPIO G2 |
| Broche 54 | PTG3 — GPIO G3 |
| Broche 55 | PTG4 — GPIO G4 |
| Broche 56 | PTG5 — GPIO G5 |
| Broche 57 | PTG6 — GPIO G6 |
| Broche 58 | PTG7 — GPIO G7 |
| Broche 59 | PTH0 — GPIO H0 |
| Broche 60 | PTH1 — GPIO H1 |
| Broche 61 | PTH2 — GPIO H2 |
| Broche 62 | PTH3 — GPIO H3 |
| Broche 63 | PTH4 — GPIO H4 |
| Broche 64 | PTH5 — GPIO H5 |
| Broche 65 | PTH6 — GPIO H6 |
| Broche 66 | PTH7 — GPIO H7 |
| Broche 67 | PTI0 — GPIO I0 |
| Broche 68 | PTI1 — GPIO I1 |
| Broche 69 | PTI2 — GPIO I2 |
| Broche 70 | PTI3 — GPIO I3 |
| Broche 71 | PTI4 — GPIO I4 |
| Broche 72 | PTI5 — GPIO I5 |
| Broche 73 | PTI6 — GPIO I6 |
| Broche 74 | RESET — Reset input (active low) |
| Broche 75 | IRQ — External interrupt request |
| Broche 76 | MODC — Mode selection |
| Broche 77 | VDDA — Analog supply voltage |
| Broche 78 | VSSA — Analog ground |
| Broche 79 | VREFH — ADC high reference |
| Broche 80 | VREFL — ADC low reference |
Applications typiques
MCF51QE96CLK convient pour 7 applications: Industrial Control PLC, HVAC Fan and Pump Controller, Point-of-Sale Terminal, Home Appliance Control Board, Security and Access Control Panel, Low-End Graphical User Interface, Portable Medical Monitor.
Industrial Control PLC
The MCF51QE96CLK fits small-form-factor industrial PLCs and remote I/O modules because its 24-channel 12-bit ADC samples multiple analog sensors simultaneously at up to 1 MSPS aggregate, and the ColdFire V1 core at 50.33 MHz executes ladder-logic and PID control loops with deterministic timing. The 96KB Flash stores ladder programs plus boot firmware, while the 96KB FlexMemory emulates EEPROM for non-volatile setpoint retention through power cycles. Operating temperature of -40C to +85C meets industrial cabinet requirements without derating.
Recommandé
HVAC Fan and Pump Controller
Variable-speed HVAC fan and pump controllers benefit from the MCF51QE96CLK's five flexible timer/PWM channels, which drive three-phase IGBT bridges directly via optocouplers, and the 24-channel ADC that monitors motor current, supply voltage, and NTC temperature sensors. The Flexis QE family operates on a single 3.3V supply, simplifying the analog front-end and reducing BOM cost versus dual-supply MCUs. Designers can prototype with the 8-bit S08QE on the same PCB and migrate to the 32-bit ColdFire for advanced sensorless control algorithms.
Recommandé
Point-of-Sale Terminal
Compact point-of-sale (POS) terminals and payment dongles leverage the MCF51QE96CLK's hardware cryptographic acceleration, SPI/SCI/I2C interfaces for magstripe and NFC readers, and 96KB Flash for transaction protocols (EMV, ISO 7816). The on-chip voltage regulator eliminates the need for an external 1.8V LDO, reducing board area, while the ColdFire V1 core processes encrypted packets in real time without offloading to a secure element. Industrial temperature grade ensures reliable operation in kiosk enclosures.
Recommandé
Home Appliance Control Board
Washing machines, dishwashers, and induction cooktops integrate the MCF51QE96CLK as the main control MCU because its 24-channel ADC reads multiple temperature and current sensors simultaneously, while the five PWM timers drive motor inverters and heating elements. The 80-LQFP package offers 69 GPIO for segmented LCDs, button matrices, and relay drivers, eliminating the need for I/O expanders. Pin compatibility with the 8-bit S08QE lets low-cost models use the S08QE while premium models use the ColdFire V1 on the same PCB artwork.
Recommandé
Security and Access Control Panel
Alarm keypads, RFID access readers, and intrusion-detection panels rely on the MCF51QE96CLK's low power consumption, hardware AES support in selected derivatives, and SCI/SPI interfaces for GSM/GPRS modems. The 96KB Flash stores event logs and zone descriptors in non-volatile memory, while the 8KB RAM supports real-time keypad scanning and tamper-switch monitoring. The -40C to +85C range suits outdoor cabinets and unheated vestibules.
Recommandé
Low-End Graphical User Interface
Appliance front panels and small industrial HMIs use the MCF51QE96CLK to drive 320x240 TFT or segment LCD displays via SPI, with the ColdFire V1 core rendering button widgets, menus, and progress bars in real time. The 96KB Flash accommodates LVGL or emWin graphical stacks plus application code, while the 8KB RAM acts as a framebuffer for partial screen updates. Designers can scale UI complexity without changing MCU family.
Recommandé
Portable Medical Monitor
Portable medical monitoring devices such as pulse oximeters and digital thermometers use the MCF51QE96CLK's low-power ColdFire V1 core, 12-bit ADC for sensor signal conditioning, and 96KB Flash for calibration tables. The 80-LQFP package supports battery-powered operation from a single 3.3V rail with efficient sleep modes, extending runtime. Industrial temperature rating covers refrigerated transport and clinical environments.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MCF51QE96CLK — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MCF51QE128CLK | MCF51QE64CLH | MCF51QU128VLHR | MCF51QE32CLH |
|---|---|---|---|---|---|
| Package | 80-LQFP (14x14) | 80-LQFP (14x14) - same | 80-LQFP (14x14) - same | 80-LQFP - same family | 80-LQFP (14x14) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Program Flash | 96 KB | 128 KB | 64 KB | 128 KB | 32 KB |
| CPU Core | ColdFire V1 (32-bit) | ColdFire V1 (32-bit) | ColdFire V1 (32-bit) | ColdFire V1 (32-bit) + USB | ColdFire V1 (32-bit) |
| Max CPU Frequency | 50.33 MHz | 50.33 MHz | 50.33 MHz | 50.33 MHz | 50.33 MHz |
| RAM | 8 KB | 8 KB | 8 KB | 8 KB | 8 KB |
| ADC Channels | 24 channels, 12-bit | 24 channels, 12-bit | 24 channels, 12-bit | 24 channels, 12-bit | 24 channels, 12-bit |
| Supply Voltage | 2.5V / 3.3V | 2.5V / 3.3V | 2.5V / 3.3V | 2.5V / 3.3V | 2.5V / 3.3V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| USB Support | No | No | No | Yes (USB 2.0 FS) | No |
Principaux différenciateurs
- Flexis pin-compatibility with 8-bit S08QE family (vs MCF51QE128CLK)
- 96 KB FlexMemory for EEPROM emulation (vs MCF51QE64CLH)
- Higher GPIO count in 80-LQFP package (vs MCF51QE32CLH (smaller variants in 64-LQFP))
Notes de conception
The MCF51QE96CLK integrates a 1.8V internal voltage regulator powered by a single 2.5V or 3.3V external supply. Place a 4.7uF decoupling capacitor as close as possible to the VDD pin (pin 1) and a 0.1uF ceramic on VDDA (pin 77). The internal regulator cannot drive external loads - do not use it as a 1.8V source for other ICs. Estimated: at 50 MHz with all peripherals active, core current draw is approximately 30 mA, so the regulator dissipates (3.3V-1.8V) x 30mA = 45 mW internally.
Route the analog VREFH and VREFL pins with wide traces and guard rings to minimize ADC noise pickup. Place the 0.1uF VREFH bypass capacitor within 5 mm of the pin. The ADC can resolve 12 bits reliably only if the analog ground VSSA (pin 78) is tied to the main ground plane with a single-point connection near the MCU, not daisy-chained across the PCB. Maintain analog trace impedance below 50 ohm by keeping ground plane intact beneath analog signals.
Do not exceed 3.6V on any VDD/VDDA pin - the absolute maximum is 4.0V with permanent damage above that. The FlexMemory region (96 KB total) must be split between program Flash and EEPROM emulation in the linker script; failing to define the partition leaves undefined startup behavior. The MODC pin (pin 76) must be tied to VSS for normal single-chip mode or to VDD for background-debug-mode entry - leaving it floating causes erratic reset behavior.
The SPI peripheral (PTF0-PTF3) supports up to 25 MHz in master mode with appropriate pull-ups on SS. For SPI slaves longer than 50 mm of trace, add 33 ohm series termination at the MCU end to suppress ringing. The I2C pins (PTD0/PTD1) require external 4.7 kohm pull-ups to VDD - the internal weak pull-ups are insufficient for reliable 400 kHz Fast-Mode operation.
Typical MCU power dissipation is below 200 mW at 50 MHz across the industrial temperature range, so thermal management is not critical for the 80-LQFP package. However, in sealed enclosures with no airflow, the junction-to-ambient thermal resistance (theta_JA approximately 45 C/W for 80-LQFP on a 4-layer JEDEC test board) yields a 9C rise above ambient at 200 mW - well within the 125C junction limit. For extreme-ambient applications above 70C, derate clock frequency or enable peripherals selectively.
Informations de conformité
RoHS compliant per NXP product page. Not AEC-Q100 qualified; choose Kinetis E or S32K series for automotive-grade applications. Industrial temperature grade -40C to +85C.
