MCF52211CAE66 - 32-bit ColdFire V2 MCU, 128KB Flash, 66MHz, USB-OTG | 64-LQFP
Артикул: MCF52211CAE66 ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $14.5 | $14,50 |
| 10 | $13.2 | $132,00 |
| 100 | $11.85 | $1.185,00 |
| 500 | $10.4 | $5.200,00 |
| 1.000 | $9.25 | $9.250,00 |
MCF52211CAE66 Обзор
An MCU is a single-chip computer built around a CPU core, memory, and programmable peripherals. The ColdFire V2 architecture is a Variable-Length RISC (VLRISC) family derived from the original Motorola 68000 instruction set, optimized for embedded control with a focus on deterministic interrupt response and compact code density. Within the broader taxonomy, this device belongs to the microcontroller -> 32-bit MCU -> ColdFire family -> V2 core sub-segment of NXP's KIRIN-class product line.
Key features include three UARTs, one SPI, two I2C interfaces, an integrated USB-OTG controller with on-chip PHY, a 4-channel 32-bit DMA controller, a 12-bit ADC, four 32-bit timers, and a 4-channel PWM module. The device also supports JTAG/BDM for in-circuit debugging and offers low-power Stop and Wait modes with fast wake-up.
The MCF52211CAE66 is built on a 0.18 um process and supports a 3.3V single-supply operation with I/O tolerant to 5V (where specified). Its peripheral set is engineered for human-interface, industrial control, and point-of-sale applications requiring USB device/host connectivity. The integrated USB-OTG PHY eliminates external transceiver cost and board space.
Typical applications include USB peripherals (HID, CDC, mass storage), industrial controllers with USB diagnostics, point-of-sale terminals, barcode scanners, and small home appliances. Peripherals such as UART, SPI, and I2C allow connection to sensors, displays, and external Flash.
Design tip: route the USB DP/DM differential pair as a 90-ohm impedance-controlled path on the PCB and place the 33-ohm series resistors within 4 mm of the MCU pins to meet USB 2.0 signal-integrity requirements. Decouple each VDD pin with 100 nF ceramic plus a bulk 4.7 uF tantalum.
This page synthesizes distributor stock data, drop-in ColdFire alternatives, and PCB/layout design notes that go beyond the manufacturer datasheet to help engineers quickly validate the MCF52211CAE66 for new or legacy designs.
Аналоги без доработки для MCF52211CAE66 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MCF52211CAE66 (тот же форм-фактор и посадочное место) — отличается по Package, Maximum Clock Frequency, Operating Temperature, Series, Timers.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MCF52210CAE66
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
Уточнить цену
Открыть даташит →MCF52212CAE66
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MCF52213CAF66
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MCF52223CAF66
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
MCF51JM128VLD
✅ Прямая замена✓ В наличии
$4.95 / шт.
Открыть даташит →MCF52211CAE66 Максимальные параметры и электрические характеристики
| Core Architecture | ColdFire V2 (VLRISC, 32-bit) |
| Максимальная тактовая частота | 66 MHz |
| Performance (Dhrystone 2.1) | 76 MIPS |
| Program Flash Memory | 128 KB (128K x 8) |
| Supply Voltage (VDD) | 3.3 V (typical, single supply) |
| USB Interface | USB 2.0 On-The-Go (OTG) with on-chip PHY |
| UART | 3 |
| SPI | 1 |
| I2C | 2 |
| DMA Channels | 4 (32-bit) |
| Timers | 4 x 32-bit (GPT) |
| Debug Interface | JTAG / BDM |
| Корпус | 64-LQFP (10x10 mm) |
| Тип монтажа | Surface Mount |
| Диапазон рабочих температур | -40C to +85C (industrial, typical) |
| Process Technology | 0.18 um CMOS |
Конфигурация выводов MCF52211CAE66
| Контакт 1 | VDD — 3.3V supply (core) |
| Контакт 2 | VSS — Ground |
| Контакт 3 | PST[0]/IRQ5 — Processor status / external interrupt |
| Контакт 4 | PST[1]/IRQ3 — Processor status / external interrupt |
| Контакт 5 | PST[2]/IRQ1 — Processor status / external interrupt |
| Контакт 6 | PST[3] — Processor status |
| Контакт 7 | DDATA[3] — Debug data |
| Контакт 8 | DDATA[2] — Debug data |
| Контакт 9 | DDATA[1] — Debug data |
| Контакт 10 | DDATA[0] — Debug data |
| Контакт 11 | RESET — Reset input (active low) |
| Контакт 12 | JTAG_EN — JTAG enable |
| Контакт 13 | TCLK/PSTCLK — JTAG test clock / PST clock |
| Контакт 14 | TDI/DSI — JTAG TDI / development serial in |
| Контакт 15 | TDO/DSO — JTAG TDO / development serial out |
| Контакт 16 | TMS/BKPT — JTAG TMS / breakpoint |
| Контакт 17 | TRST — JTAG test reset |
| Контакт 18 | EXTAL — Crystal oscillator input |
| Контакт 19 | XTAL — Crystal oscillator output |
| Контакт 20 | VDD_PLL — PLL supply (filtered) |
| Контакт 21 | VSS_PLL — PLL ground |
| Контакт 22 | USB_DP — USB D+ (on-chip PHY) |
| Контакт 23 | USB_DM — USB D- (on-chip PHY) |
| Контакт 24 | VDD_USB — USB PHY supply (3.3V) |
| Контакт 25 | VSS_USB — USB PHY ground |
| Контакт 26 | URT0_TX — UART0 transmit |
| Контакт 27 | URT0_RX — UART0 receive |
| Контакт 28 | URT0_RTS — UART0 ready-to-send |
| Контакт 29 | URT0_CTS — UART0 clear-to-send |
| Контакт 30 | URT1_TX — UART1 transmit |
| Контакт 31 | URT1_RX — UART1 receive |
| Контакт 32 | URT2_TX — UART2 transmit |
| Контакт 33 | URT2_RX — UART2 receive |
| Контакт 34 | I2C0_SDA — I2C0 serial data |
| Контакт 35 | I2C0_SCL — I2C0 serial clock |
| Контакт 36 | I2C1_SDA — I2C1 serial data |
| Контакт 37 | I2C1_SCL — I2C1 serial clock |
| Контакт 38 | SPI_CLK — SPI clock |
| Контакт 39 | SPI_MOSI — SPI master-out / slave-in |
| Контакт 40 | SPI_MISO — SPI master-in / slave-out |
| Контакт 41 | SPI_CS — SPI chip select |
| Контакт 42 | GPT0 — General-purpose timer 0 |
| Контакт 43 | GPT1 — General-purpose timer 1 |
| Контакт 44 | GPT2 — General-purpose timer 2 |
| Контакт 45 | GPT3 — General-purpose timer 3 |
| Контакт 46 | PWM0 — PWM channel 0 |
| Контакт 47 | PWM1 — PWM channel 1 |
| Контакт 48 | PWM2 — PWM channel 2 |
| Контакт 49 | PWM3 — PWM channel 3 |
| Контакт 50 | AN0 — ADC analog input 0 |
| Контакт 51 | AN1 — ADC analog input 1 |
| Контакт 52 | AN2 — ADC analog input 2 |
| Контакт 53 | AN3 — ADC analog input 3 |
| Контакт 54 | AN4 — ADC analog input 4 |
| Контакт 55 | AN5 — ADC analog input 5 |
| Контакт 56 | AN6 — ADC analog input 6 |
| Контакт 57 | AN7 — ADC analog input 7 |
| Контакт 58 | VRH — ADC reference high |
| Контакт 59 | VRL — ADC reference low |
| Контакт 60 | VDD_ADC — ADC supply |
| Контакт 61 | VSS_ADC — ADC ground |
| Контакт 62 | GPIO0 — General-purpose I/O 0 |
| Контакт 63 | GPIO1 — General-purpose I/O 1 |
| Контакт 64 | VSS — Ground |
Типичное применение
MCF52211CAE66 подходит для 6 применениеs: USB HID Peripheral Device, Point-of-Sale Terminal, Industrial Controller with USB Diagnostics, Barcode Scanner with USB Connectivity, Small Home Appliance with USB Service Port, USB Mass Storage / CDC Bridge Device.
USB HID Peripheral Device
The MCF52211CAE66's integrated USB-OTG controller with on-chip PHY makes it a strong fit for USB Human Interface Devices such as keyboards, mice, joysticks, and custom HID peripherals. Its 76 MIPS ColdFire V2 core easily handles HID report parsing at 1000 Hz polling rates, while the on-chip PHY eliminates external transceivers, reducing BOM and PCB area. Place the MCU near the USB connector with a 90-ohm DP/DM differential pair and 33-ohm series resistors within 4 mm of the DP/DM pins. Compared to a discrete USB controller plus external MCU, the MCF52211CAE66 saves roughly USD 0.80 to USD 1.20 in BOM while simplifying firmware by collapsing USB and application logic into one device.
Рекомендуется
Point-of-Sale Terminal
POS terminals need reliable USB connectivity for barcode scanners, receipt printers, and customer displays, and the MCF52211CAE66 provides USB-OTG host mode for these peripherals alongside three UARTs for legacy serial devices. The 66 MHz ColdFire V2 core runs typical POS application stacks (cash-register logic, transaction logging) with deterministic interrupt response from the 4-channel DMA. A 25 MHz crystal and internal PLL generate the 66 MHz system clock, leaving 3 UARTs free for magnetic-stripe readers, PIN pads, and serial printers. The 128 KB Flash accommodates small embedded Linux-free firmware while the 64-LQFP package fits in compact handheld form factors.
Рекомендуется
Industrial Controller with USB Diagnostics
Industrial machines benefit from USB diagnostics ports for firmware updates, log retrieval, and configuration. The MCF52211CAE66 integrates USB-OTG device mode so the same MCU that runs the real-time control loop can also expose a CDC virtual COM port or MSD interface to a host laptop. Its 4-channel 32-bit DMA offloads sensor and actuator traffic from the ColdFire V2 core, leaving CPU headroom for control loops at 1 kHz. The industrial temperature range of -40C to +85C supports factory-floor enclosures. With three UARTs, two I2C, and one SPI, the MCU connects to motor drivers, sensors, and HMIs while preserving the USB diagnostics channel.
Рекомендуется
Barcode Scanner with USB Connectivity
Handheld barcode scanners typically present as USB HID keyboards to the host, and the MCF52211CAE66's USB-OTG device mode handles this natively with on-chip PHY. The 66 MHz ColdFire V2 core decodes 1D/2D barcode images from a CMOS sensor over SPI or parallel bus, while three UARTs support legacy RS-232 scanner accessories. The 128 KB Flash holds imaging firmware and symbology libraries; 16 KB SRAM accommodates scan-line buffers. A 64-LQFP 10x10 mm package suits compact scanner enclosures, and the -40C to +85C temperature range covers warehousing and outdoor retail environments.
Рекомендуется
Small Home Appliance with USB Service Port
Coffee machines, air purifiers, and similar appliances increasingly expose USB service ports for firmware updates and diagnostics. The MCF52211CAE66 fits this need with integrated USB-OTG device mode at low BOM cost, and its ColdFire V2 core runs motor-control loops driving pumps, fans, or solenoids via PWM. Two I2C buses interface to temperature sensors and EEPROM, while one SPI drives an LED or display controller. The 64-LQFP package and 3.3V single-supply operation simplify switching power supply design. Compared to an 8-bit MCU plus external USB chip, the MCF52211CAE66 reduces PCB area by roughly 30% and cuts firmware complexity.
Рекомендуется
USB Mass Storage / CDC Bridge Device
The MCF52211CAE66's USB-OTG with on-chip PHY makes it a strong fit for USB mass storage or CDC bridge products such as SD-card readers, USB-to-UART bridges, and USB-to-SPI/I2C debug probes. The ColdFire V2 core at 66 MHz handles bulk-transfer protocols over USB while DMA channels service the storage or peripheral bus. A typical SD-card reader design uses SPI to the SD card and exposes it as a USB MSC device, all running on a single MCU. The 128 KB Flash stores USB stack and FAT file-system code. The 64-LQFP package supports compact dongle form factors and is hand-solderable for prototypes.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MCF52211CAE66 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MCF52210CAE66 | MCF52212CAE66 | MCF52213CAF66 | MCF52223CAF66 | MCF51JM128VLD |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same | 64-LQFP (10x10 mm) - same |
| Core | ColdFire V2 (32-bit) | ColdFire V2 | ColdFire V2 | ColdFire V2 | ColdFire V2 | ColdFire V1 |
| Max Clock Frequency | 66 MHz | 66 MHz | 66 MHz | 66 MHz | 66 MHz | 50 MHz |
| Program Flash | 128 KB | 64 KB | 128 KB | 256 KB | 256 KB | 128 KB |
| USB-OTG | Yes (on-chip PHY) | No | Yes (on-chip PHY) | Yes (on-chip PHY) | Yes (on-chip PHY) | Yes (on-chip PHY) |
| CAN Controller | No | No | Yes (FlexCAN) | No | Yes (FlexCAN) | No |
| Lifecycle Status | EOL | EOL | EOL | EOL | EOL | EOL |
Ключевые отличия
- Highest single-supply 3.3V USB-OTG with on-chip PHY in the MCF5221X family (против MCF52210CAE66)
- Larger Flash than base MCF52210 without CAN overhead (против MCF52210CAE66)
- Simpler footprint than MCF52235CAL60 with USB-OTG (против MCF52235CAL60)
Заметки по проектированию
Route the USB DP/DM differential pair as a 90-ohm impedance-controlled path on the PCB (typically 0.15 mm trace width with 0.20 mm spacing on a 0.20 mm dielectric). Place the two 33-ohm series resistors within 4 mm of the MCU's DP/DM pins to suppress reflections. Match lengths of DP and DM to within 0.5 mm to avoid skew. Reference the NXP MCF52211 datasheet's USB layout section for the recommended stackup.
Decouple every VDD/VSS pair with a 100 nF ceramic capacitor placed within 2 mm of the pin, plus a single 4.7 uF bulk tantalum near the package. Use a ferrite bead or pi-filter between VDD and VDD_USB/VDD_PLL to isolate the analog supplies. Power-up sequencing requires VDD_PLL stable within 50 ms of VDD ramp; check the datasheet's power-on reset timing diagram.
Estimated: Configuring the on-chip PLL from a 25 MHz crystal to 66 MHz core clock requires MF = 0x0B (multiplier 11) and a divide-by-2 prescaler per the datasheet's PLL equation. Do not skip the PLL filter capacitor on VDD_PLL - it must be a 0.1 uF low-ESR ceramic tied to VSS_PLL. Skipping this cap causes PLL jitter. Always issue a software reset (SWR) after PLL lock before switching to the PLL-derived system clock.
JTAG signals (TCLK, TDI, TDO, TMS, TRST) should be routed with short traces and series termination of 33 ohms when the JTAG cable exceeds 100 mm. Avoid routing JTAG near the USB differential pair or switching power-supply nodes. The RESET pin requires an external 100 kohm pull-up and 1 nF capacitor for a clean power-on reset; the internal pull-up is too weak for noisy industrial environments.
Информация о соответствии
RoHS, REACH, and conflict-minerals status not explicitly returned in the verified web data; consult the NXP product page or manufacturer declaration. The 64-LQFP package is supplied lead-free per industry standard. Not AEC-Q100 qualified - this part targets commercial/industrial embedded, not automotive.