MCF53014CMJ240J - 240MHz ColdFire V3 32-Bit MPU | NXP
Артикул: MCF53014CMJ240J ⚠ Последняя закупка| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
MCF53014CMJ240J Обзор
A microprocessor such as the MCF53014 is a higher-level computing device than a microcontroller: it executes an instruction set, manages memory, coordinates peripherals, and supports embedded operating systems or real-time control software. The ColdFire V3 architecture combines that general-purpose processing role with integrated connectivity, allowing an industrial controller to handle networking and embedded voice functions without requiring separate interface devices. Its 240 MHz operating frequency provides a concrete performance point for control-loop, communications, and human-interface workloads.
Verified features include Version 3 ColdFire processing with EMAC, 211 Dhrystone 2.1 MIPS at 240 MHz, a 16 KB unified instruction/data cache, and 128 KB internal SRAM. The internal SRAM includes standby power-supply support, while the peripheral mix includes DMA, PWM, and a watchdog timer. The processor is a ROMless device, so production designs must provide external nonvolatile boot storage rather than relying on integrated program memory.
The 256-MAPBGA package and industrial temperature grade position the device for embedded industrial-control platforms rather than general commercial hobby use. Its external bus and serial interfaces support connections to memory, storage, audio circuitry, communications equipment, and human-interface modules. The Ethernet MAC and USB connectivity are especially relevant to gateways, terminals, and voice-enabled industrial equipment, while the watchdog and DMA resources support reliable real-time system behavior.
A primary design consideration is package complexity. A 256-ball BGA requires careful PCB escape routing, via-in-pad or via-under-bump strategies where required, controlled impedance, adequate power-plane integrity, and assembly-process validation. Designers should also verify external memory support, boot-memory requirements, pin multiplexing, and power sequencing against the manufacturer data sheet before layout release. The verified sources identify the package as 17 mm by 17 mm MAPBGA-256, but the complete public pinout was not included in the supplied evidence.
Аналоги без доработки для MCF53014CMJ240J — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MCF53014CMJ240J (тот же форм-фактор и посадочное место) — отличается по Package, RoHS Status.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
Для этого товара нет аналогов без доработки.
Запросить аналогиMCF53014CMJ240J Максимальные параметры и электрические характеристики
| Device Type | 32-bit microprocessor |
| Core | ColdFire V3 |
| Максимальная тактовая частота | 240 MHz |
| Processor Architecture | 32-bit |
| Performance | 211 Dhrystone 2.1 MIPS at 240 MHz |
| Program Memory | ROMless; external boot memory required |
| Unified Cache | 16 KB |
| Internal SRAM | 128 KB |
| SRAM Standby Support | Supported |
| Ethernet | Ethernet MAC |
| External Bus | EBI/EMI |
| Serial Interfaces | I2C, SPI, SSI, UART/USART |
| USB Interfaces | USB and USB OTG |
| External Storage Connectivity | Memory card connectivity |
| DMA | Available |
| PWM | Available |
| Watchdog Timer | WDT available |
| Number of I/O | 83 |
| Корпус | 256-MAPBGA, 17 mm x 17 mm |
| Package Type | Plastic MAPBGA-256 |
| Temperature Grade | Industrial |
| Напряжение питания | 3.3 V |
| Статус RoHS | RoHS compliant |
Руководство по цоколевке MCF53014CMJ240J в корпусе plastic mapbga-256
Цоколевка для MCF53014CMJ240J (корпус plastic mapbga-256). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MCF53014CMJ240J.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MCF53014CMJ240J подходит для 6 применениеs: Industrial Voice Control Terminal, Industrial Ethernet Gateway, USB-Conditioned Data Acquisition Unit, Embedded Human-Machine Interface, Automated Test and Measurement Controller, Industrial Communication Controller.
Industrial Voice Control Terminal
The MCF53014CMJ240J fits an industrial voice-control terminal because it combines a 240 MHz ColdFire V3 processor with Ethernet, USB, serial interfaces, and voice-codec connectivity identified in the verified source data. Its 32-bit architecture and 211 Dhrystone 2.1 MIPS provide a practical processing platform for user-interface handling, local control, communications, and audio-management tasks. The processor's 128 KB internal SRAM can support short-lived working data, while ROMless operation requires external boot storage. Engineers should verify codec timing, Ethernet PHY integration, memory-map compatibility, and the 256-MAPBGA layout before committing the PCB.
Рекомендуется
Industrial Ethernet Gateway
The MCF53014CMJ240J is suitable for an Ethernet-connected industrial gateway because the verified records identify Ethernet MAC capability, a ColdFire V3 core at 240 MHz, USB, USB OTG, UART/USART, SPI, and an external bus. Those resources support protocol handling, local data acquisition, USB service connections, and supervisory control traffic in a compact embedded platform. The 16 KB unified cache and 128 KB internal SRAM help manage active code and data, while the ROMless architecture leaves boot and configuration storage to the board designer. Layout must preserve high-speed signal integrity and provide robust power delivery to all 256 BGA balls.
Рекомендуется
USB-Conditioned Data Acquisition Unit
The MCF53014CMJ240J can serve as the control processor in a data-acquisition unit requiring USB, USB OTG, memory-card connectivity, and multiple serial interfaces. Its 240 MHz 32-bit ColdFire V3 core can coordinate sampling control, local buffering, communications, and configuration storage. The 128 KB internal SRAM is useful for active buffers, but the exact application capacity depends on the firmware and external memory architecture. Because the target is ROMless, a production board should include a validated boot-memory solution and must carefully budget BGA escape routing, decoupling, and signal-integrity margins.
Рекомендуется
Embedded Human-Machine Interface
The MCF53014CMJ240J is applicable to an embedded human-machine interface when local responsiveness and connectivity are both important. Its 240 MHz ColdFire V3 core provides a defined instruction-rate target for display, keypad, and communications tasks, while Ethernet, USB, UART/USART, SPI, and SSI connectivity support peripheral integration. The 16 KB unified cache and 128 KB internal SRAM help keep frequently used code and data close to the processor. A design should confirm the external memory map, boot behavior, pin multiplexing, and BGA assembly process before using the part in a volume industrial HMI.
Рекомендуется
Automated Test and Measurement Controller
The MCF53014CMJ240J can support an automated test-equipment controller where a real-time control loop, network management, and peripheral coordination are required. The 240 MHz processor and 211 Dhrystone 2.1 MIPS provide a useful baseline for sequencing tests and handling supervisory software, while DMA, PWM, watchdog, and serial interfaces support peripheral orchestration. The ROMless configuration requires a validated external boot path, and the 256-MAPBGA package demands careful thermal, power, and layout engineering. Timing-critical analog or RF functions should remain separated from the processor unless the complete system timing budget proves adequate.
Рекомендуется
Industrial Communication Controller
The MCF53014CMJ240J is a reasonable candidate for an industrial communication controller because the verified data lists Ethernet, USB, USB OTG, UART/USART, SPI, SSI, I2C, and EBI/EMI connectivity alongside DMA and watchdog support. Those interfaces allow one processor to coordinate multiple communication paths, local I/O, and system recovery behavior. Its 3.3 V supply and industrial grade make it more appropriate for industrial equipment than an unspecified commercial package. Before layout, verify transceiver requirements, signal termination, isolation, grounding, and the exact BGA power-ball assignments in the manufacturer package documentation.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MCF53014CMJ240J — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар |
|---|---|
| Package | 256-MAPBGA, 17 mm x 17 mm |
| Brand | NXP Semiconductors |
| Device Type | 32-bit microprocessor |
| Core | ColdFire V3 |
| Clock Frequency | 240 MHz |
| Performance | 211 Dhrystone 2.1 MIPS |
| Program Memory | ROMless |
| Internal SRAM | 128 KB |
| Unified Cache | 16 KB |
| Connectivity | EBI/EMI, Ethernet, I2C, memory card, SPI, SSI, UART/USART, USB, USB OTG |
| Number of I/O | 83 |
| Supply Voltage | 3.3 V |
| Temperature Grade | Industrial |
| Lifecycle Status | Last Time Buy |
Ключевые отличия
- Integrated connectivity for embedded voice and industrial control (против Generic industrial-control MCU alternatives)
- Higher stated compute target than basic 8-bit or low-end control devices (против Lower-end embedded controller alternatives)
- ROMless architecture supports flexible external boot-memory selection (против Integrated-ROM microcontroller alternatives)
Заметки по проектированию
The MCF53014CMJ240J uses a 256-MAPBGA package, so the PCB should be designed for the exact 17 mm by 17 mm land pattern and manufacturer-recommended escape strategy. Establish ball assignments and power domains from the complete data sheet before routing; the supplied evidence does not contain a complete numbered pinout. Confirm via geometry, solder-mask definitions, pad-to-mask design, and assembly capability with the board fabricator before release.
Plan the 3.3 V power architecture for a ROMless 256-BGA microprocessor rather than treating it like a small controller. Place local decoupling close to the relevant power balls, maintain continuous reference planes, and verify the complete power-ball list, current requirements, sequencing, and allowable ripple in the manufacturer data sheet. Exact capacitor values and voltage-current limits were not included in the supplied verification and must not be inferred from generic guidance.
Route Ethernet, USB, and other high-speed interfaces as controlled-impedance nets with continuous return paths and carefully managed BGA escapes. The verified feature list confirms USB, USB OTG, Ethernet, and EBI/EMI support, but it does not provide interface timing, impedance, or transceiver details. Use the exact electrical specifications from the applicable manufacturer documentation and validate the final board with appropriate signal-integrity analysis.
Do not treat the MCF5301x family name as proof that a neighboring MPN is a drop-in replacement. MCF53014CMJ240J is ROMless and its verified feature set depends on external boot memory, peripheral multiplexing, and a 256-ball package. Before substituting any related part, compare the complete pin map, memory controller behavior, interrupt vector, boot requirements, peripheral set, voltage levels, and BGA footprint; no verified drop-in substitute was found in the supplied cross-reference results.
Информация о соответствии
The supplied DigChip result identifies the MCF53014 family package as RoHS compliant. The exact MPN's REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not supplied and must be confirmed from current manufacturer documentation.
