MCF5470VR200 - 200MHz ColdFire V4E 32-bit MPU, 388-PBGA | NXP
Артикул: MCF5470VR200 ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $48.5 | $48,50 |
| 10 | $43.2 | $432,00 |
| 100 | $38.65 | $3.865,00 |
| 500 | $34.1 | $17.050,00 |
| 1.000 | $30.25 | $30.250,00 |
MCF5470VR200 Обзор
A microprocessor (MPU) is a fully-integrated CPU complex — ALU, caches, MMU, and bus controllers — fabricated as a single chip and intended to run an operating system. ColdFire processors sit in the 32-bit embedded MPU hierarchy (M68k-derived, simplified instruction set, lower cost per MIPS than PowerPC), and the V4E variant adds an enhanced integer pipeline plus optional FPU support. The MCF5470VR200 occupies the high-end networking tier within that ColdFire line, positioned between the MCF5445x and the older MCF548x. It is historically classified under Embedded Processors and Controllers > Microcontrollers / Microprocessors in component taxonomy.
Key features include 32 KB instruction / 32 KB data L1 caches, an enhanced ColdFire V4 core with multiply-accumulate (EMAC), dual 10/100 Ethernet MACs with hardware acceleration, a 32-bit/66 MHz PCI 2.2 bus controller, USB 2.0 full-speed device and host, four 32-bit timers, dual CAN 2.0B controllers, three UARTs, two I2C, and two SSI/SPI/I2S serial interfaces. The integrated security engine (SEC) accelerates DES, 3DES, AES, SHA-1/MD5 — purpose-built for secure networked control.
Architecturally, the V4E core supersedes V4 with branch acceleration, larger TLBs, and improved DMA-coupled peripheral throughput. The 200 MHz core drives up to 305 MIPS sustained, with deterministic interrupt latency suitable for real-time Ethernet/control loops. On-chip 32 KB SRAM and external SDRAM/DDR-style memory controller (plus FlexBus for NAND/NOR/FPGA) deliver headroom for protocols like uClinux, RTEMS, or VxWorks with full MMU protection.
Typical applications include industrial Ethernet gateways, factory-automation PLCs with secure remote management, networked printers and multifunction peripherals, building-automation controllers, smart-grid concentrators, point-of-sale / payment terminals, and embedded web/Ethernet servers. The dual-Ethernet + PCI combination is the classic industrial-control signature; the encryption accelerator answers the secure-management slot.
When designing with the MCF5470VR200, plan for a 6–10 layer PCB to fan out the 1.00 mm-pitch 388-ball grid and place at least four 0.1 µF/10 µF decoupling groups near each power quadrant (1.5 V core, 2.5 V/3.3 V I/O). The part is now NRND, so RoHS-compliant lead-free assembly is mandatory and a second-source plan is recommended for new designs.
Аналоги без доработки для MCF5470VR200 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MCF5470VR200 (тот же форм-фактор и посадочное место) — отличается по Package, Encryption Accelerator, FPU, RoHS Status, MMU.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MCF5472VR200
✅ Прямая замена✓ В наличии
$27.8 / шт.
Открыть даташит →MCF5474VR200
✅ Прямая замена✓ В наличии
$25.4 / шт.
Открыть даташит →MCF5475VR200
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$25.6 / шт.
Открыть даташит →MCF5482CVR200
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MCF5484CVR200
✅ Прямая замена✓ В наличии
$19.25 / шт.
Открыть даташит →MCF5485CVR200
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
Уточнить цену
Открыть даташит →MCF5470VR200 Максимальные параметры и электрические характеристики
| Core Processor | ColdFire V4E |
| Core Size | 32-Bit Single-Core |
| Максимальная тактовая частота | 200 MHz |
| Operating Voltage (Core) | 1.5 V |
| Operating Voltage (I/O) | 2.5 V / 3.3 V |
| Program Memory Type | ROMless |
| L1 Cache (I/D) | 32 KB / 32 KB |
| MMU | Yes |
| FPU | Yes |
| Ethernet | 2 × 10/100 MAC |
| PCI Bus | PCI 2.2, 32-bit, up to 66 MHz |
| USB | USB 2.0 Full-Speed Device/Host |
| CAN | 2 × CAN 2.0B |
| Encryption Accelerator | DES / 3DES / AES / SHA-1 / MD5 |
| Корпус | 388-PBGA, 27x27 mm, 1.00 mm pitch |
| Тип монтажа | Surface Mount |
| Рабочая температура | 0°C to +70°C (Commercial) |
| Статус RoHS | Compliant (lead-free) |
| Статус жизненного цикла | NRND (Not Recommended for New Designs) |
Руководство по цоколевке MCF5470VR200 в корпусе 388-pbga, 27x27 mm, 1.00 mm pitch
Цоколевка для MCF5470VR200 (корпус 388-pbga, 27x27 mm, 1.00 mm pitch). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MCF5470VR200.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MCF5470VR200 подходит для 7 применениеs: Industrial Ethernet Gateway / Router, Secure Building-Automation Controller, Networked Multifunction Printer / MFP Controller, Smart-Grid Concentrator / Substation IED, Industrial Payment Terminal / Secure POS, Embedded Linux/uClinux Web Server Appliance, Automotive Aftermarket / In-Vehicle Telematics (non-safety).
Industrial Ethernet Gateway / Router
The MCF5470VR200's dual 10/100 MACs with hardware acceleration, the PCI 2.2/66 MHz bus for external PHY or switching fabric, and the embedded ColdFire V4E MMU make it a near-textbook fit for industrial Ethernet gateways and protocol-conversion routers. The integrated SEC accelerator off-loads DES/3DES/AES/SHA-1 sessions, allowing VPN/secure-MQTT tunnels to run without burning core cycles; sustained throughput stays inside the 200 MHz envelope. Built for long-life programs at factory-floor temperatures (0 °C to +70 °C commercial grade) with lead-free PBGA assembly, the part lets designers ship a 24/7 deterministic Ethernet node with VxWorks or uClinux.
Рекомендуется
Secure Building-Automation Controller
For HVAC, lighting and access-control head-ends, the MCF5470VR200 delivers both the dual Ethernet ports required for IP-bus segmentation and the SEC accelerator that authenticates BACnet/IP-secure and TLS sessions. Its 32 KB L1 instruction cache deterministically serves real-time control loops while the MMU shields the BACnet stack from the management UI, and the FPU accelerates trending and PID math. The 388-PBGA package supports a fan-less, conformal-coated chassis suitable for ceiling-mounted control panels. PCI host mode can accept a wireless M-Bus or LoRa gateway card, making the part a single-silicon building-automation platform.
Рекомендуется
Networked Multifunction Printer / MFP Controller
Office MFPs and production printers need an MPU that can juggle gigabit-speed imaging pipelines, USB mass-storage hosts, and authenticated remote-management sessions — exactly the MCF5470VR200's wheelhouse. The USB 2.0 full-speed host interfaces directly with card readers and operator panels; PCI 2.2 slots the imaging ASIC; dual Ethernet gives one port for the office LAN and one for the service technician's service-port subnet. ColdFire V4E delivers predictable interrupt response so duplex scan/print operations stay glitch-free, and the FPU accelerates raster compression.
Рекомендуется
Smart-Grid Concentrator / Substation IED
In a substation IED or smart-grid concentrator, the MCF5470VR200 acts as the secure protocol bridge: dual Ethernet for IEC 61850 station bus/process bus separation, dual CAN 2.0B for legacy metering trunks, and the SEC block for MACsec-secure GOOSE messages. The MMU runs a protected-mode RTOS to isolate SCADA stacks from operator HMI code, and the FPU accelerates power-quality DSP such as FFT-based harmonic analysis. Its commercial-grade temperature range plus industrial EMC design margin makes the part a fit for indoor cubicle IEDs feeding DERs and AMI networks.
Рекомендуется
Industrial Payment Terminal / Secure POS
PCI-PTS payment terminals need a 32-bit MMU-protected core, accelerated AES/DES for PIN-block encryption, and IP connectivity that is hard to compromise — and the MCF5470VR200 covers all three. The dual Ethernet ports segregate the merchant LAN from the acquirer tunnel, while the dedicated SEC block performs TDES PIN translation inside a hardware-isolated engine. ColdFire V4E deterministic interrupt latency enforces keypad-debounce timing and EMVCo transaction budgets. The lead-free 388-PBGA package supports conformal-coat assembly typical of POS chassis.
Рекомендуется
Embedded Linux/uClinux Web Server Appliance
Remote-management appliances — IPMI boards, router control planes, network-attached storage controllers — are classic ColdFire use cases, and the MCF5470VR200 with its MMU runs Linux or uClinux comfortably. The dual Ethernet ports provide the management and data planes; the PCI bus hosts an extra 4-port NIC; the SEC accelerator hardens the management HTTPS/TLS path. SDRAM plus NAND/NOR via FlexBus supports a persistent configuration store; USB device-mode allows field-upgrade technicians to attach a recovery stick. The 200 MHz V4E core is more than sufficient for typical control-plane workloads, leaving the FPU free for any housekeeping math.
Рекомендуется
Automotive Aftermarket / In-Vehicle Telematics (non-safety)
Although not AEC-Q100 qualified, the MCF5470VR200's dual CAN 2.0B controllers make it a strong candidate for in-vehicle telematics head units and aftermarket fleet gateways in non-safety-critical compartments. The SEC accelerator secures OBD-II diagnostic uploads and MQTT telemetry, and the dual Ethernet ports support entertainment-bus segmentation from a cellular gateway. Designers should plan a careful thermal and EMI study, since the part is rated for commercial (0 °C to +70 °C) and not automotive temperature grades; placing it inside a sealed cabin enclosure is typical.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MCF5470VR200 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MCF5472VR200 | MCF5474VR200 | MCF5482CVR200 | MCF5484CVR200 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 388-PBGA (S-PBGA-B388) 27x27 mm, 1.00 mm pitch | 388-PBGA (S-PBGA-B388) 27x27 mm - identical | 388-PBGA (S-PBGA-B388) 27x27 mm - identical | 388-PBGA (S-PBGA-B388) 27x27 mm - identical | 388-PBGA (S-PBGA-B388) 27x27 mm - identical |
| Core Processor | ColdFire V4E | ColdFire V4E | ColdFire V4E | ColdFire V4E | ColdFire V4E |
| Maximum Clock Frequency | 200 MHz | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| MMU / FPU | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes |
| Ethernet MACs | 2 × 10/100 | 2 × 10/100 | 2 × 10/100 | 2 × 10/100 | 2 × 10/100 |
| Hardware Encryption Accelerator | DES/3DES/AES/SHA-1/MD5 | Enhanced SEC + USB OTG | Full SEC: DES/3DES/AES + RNG + public-key | None | None |
| CAN 2.0B Controllers | 2 | 2 | 2 | 1 | 1 |
| PCI Bus | PCI 2.2, 32-bit, 66 MHz | PCI 2.2, 32-bit, 66 MHz | PCI 2.2, 32-bit, 66 MHz | PCI 2.2, 32-bit, 66 MHz | PCI 2.2, 32-bit, 66 MHz |
Ключевые отличия
- Hardware encryption accelerator (SEC) on-chip (против MCF5482CVR200)
- Dual independent CAN 2.0B controllers (против MCF5482CVR200)
- Identical 388-PBGA family pinout for drop-in upgrades (против MCF5472VR200)
- MMU + FPU on a 200 MHz ColdFire V4E (против MCF51AC128AVLKE)
Заметки по проектированию
The 388-PBGA at 1.00 mm pitch demands a 6–10 layer PCB with laser-drilled microvias for BGA escape; signal layers should be paired with dedicated GND planes to control the impedance of the dual Ethernet MII/RMII traces (typically 50 Ω single-ended). Fan-out the BGA into a dog-bone or via-in-pad pattern, keeping vias clear of the central silicon keep-out. NXP's ColdFire BSP includes reference layouts that can be licensed into Altium or Cadence Allegro to shorten the design cycle.
Estimated: with a 1.5 V core rail and a 3.3 V I/O rail, the part is expected to draw roughly 700 mA in active mode at 200 MHz. Provide at least four 10 µF bulk ceramic + sixteen 0.1 µF decoupling caps around the BGA, grouped near each of the four power quadrants. Keep the 1.5 V LDO within 25 mm of the core balls; ripple should stay below 50 mV peak-to-peak to avoid PLL jitter and consequent Ethernet clock drift.
The 388-PBGA's θJA is typically 18–22 °C/W on a 4-layer JEDEC test board, so continuous 200 MHz operation is manageable at commercial 0 °C–70 °C without a heatsink. Estimated: junction temperature rise at full load is in the 12–15 °C range above ambient. For sealed enclosures with restricted airflow, derate by 30% or attach a small aluminum spreader over the BGA lid. Avoid placing the part adjacent to a heatsinked Ethernet PHY or voltage regulator.
Do not assume MCF5470VR200 silicon revision matches MCF5472VR200 — there are boot-mode resistor settings that differ. Verify that the JTAG, RSTOUT, and EXTAL/XTAL pin states are correctly set during reset, and confirm that the SEC accelerator driver in your BSP supports the older descriptor schema. Finally, because the part is NRND, lock a multi-year buy or qualify a replacement before committing to a long-life industrial design.
Route PCI 32-bit/66 MHz signals on the layer immediately beneath the top-component layer with continuous GND reference; match trace length to within ±150 mil (3.8 mm) to keep skew below the PCI 2.2 budget. For USB 2.0, observe 90 Ω differential impedance and place the common-mode choke within 5 mm of the connector. MII traces to the dual Ethernet PHYs should be length-matched pair-to-pair rather than net-to-net.
Информация о соответствии
RoHS and lead-free per NXP product page (NRND part is produced only in lead-free / Pb-free PBGA). Commercial temperature grade (0°C to +70°C) — not AEC-Q100; design accordingly for non-automotive deployments only. REACH, halogen-free, and CM conflict-mineral status taken from NXP product information; specific CM declaration document not quoted.
