MCF5475VR200 - 200MHz ColdFire V4E MPU 388-PBGA | NXP
Артикул: MCF5475VR200 ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $35.2 | $352,00 |
| 100 | $31.4 | $3.140,00 |
| 500 | $28.1 | $14.050,00 |
| 1.000 | $25.6 | $25.600,00 |
MCF5475VR200 Обзор
A ColdFire V4E microprocessor is a 32-bit RISC-style MPU derived from the original m68k architecture, optimized for embedded applications that require MMU memory protection and an FPU. It sits in the broader taxonomy: ColdFire V4E -> ColdFire family -> 32-bit embedded MPU -> microprocessor -> integrated circuit -> semiconductor. Compared to ARM Cortex-A parts, ColdFire V4E delivers higher MHz-per-MHz performance on legacy code while retaining a familiar m68k programming model.
Key features include a Harvard architecture with separate instruction and data buses, integrated L1 cache, hardware MMU supporting virtual memory, and a hardware FPU for single/double-precision floating point. The device provides dual 10/100 Ethernet MACs with DMA, a 32-bit PCI 2.2 controller, USB 2.0 full-speed device, four UARTs, two I2C, two SSI/SPI, and an encryption accelerator (SEC) for DES/3DES/AES/SHA.
The MCF547x family operates from 1.5V core and 3.3V I/O supplies, with a typical power consumption around 1.5W at 200 MHz. The 388-pin PBGA package provides ample signal and ground pins for the multi-bus architecture, and the part is specified for the 0C to +70C commercial or -40C to +85C extended temperature range depending on variant.
Typical applications include industrial networking gateways, factory automation controllers, point-of-sale terminals, network-attached printers, secure communication appliances, and HMI/operator interface panels. The integrated PCI controller enables connection to companion ASICs, FPGA coprocessors, or standard PCI peripherals such as graphics controllers.
When designing with this part, route high-speed Ethernet and PCI signals with controlled impedance (50 ohm differential for Ethernet, 50/60 ohm for PCI) and provide bulk decoupling on both the 1.5V core and 3.3V I/O rails. Mind the PBGA 27x27 mm footprint and ensure the PCB supports the 1.0 mm ball pitch assembly process.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Аналоги без доработки для MCF5475VR200 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MCF5475VR200 (тот же форм-фактор и посадочное место) — отличается по Package, Encryption Accelerator, Core Processor, RoHS Status, FPU.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MCF5471VR200
✅ Прямая замена✓ В наличии
$26.4 / шт.
Открыть даташит →MCF5470VR200
✅ Прямая замена✓ В наличии
$30.25 / шт.
Открыть даташит →MCF5474VR266
✅ Прямая замена✓ В наличии
$1 / шт.
Открыть даташит →MCF5482CVR166
✅ Прямая замена✓ В наличии
$70 / шт.
Открыть даташит →MCF5471ZP200
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
MCF5475VR200 Максимальные параметры и электрические характеристики
| Core | ColdFire V4E |
| Core Architecture | Harvard (separate instruction/data buses) |
| Bit Width | 32-bit |
| Maximum Core Frequency | 200 MHz |
| MMU | Yes (hardware memory management unit) |
| FPU | Yes (hardware floating-point unit) |
| L1 Cache | Integrated (instruction + data) |
| Рабочее напряжение питания | 1.5 V core / 3.3 V I/O |
| Ethernet MACs | 2x 10/100 Mbps |
| PCI Controller | 32-bit PCI 2.2 |
| USB | USB 2.0 full-speed device |
| UART | 4 |
| I2C | 2 |
| SSI/SPI | 2 |
| Encryption Accelerator | SEC (DES/3DES/AES/SHA) |
| Корпус | 388-pin PBGA (27x27 mm, 1.0 mm ball pitch) |
Руководство по цоколевке MCF5475VR200 в корпусе 388-pin pbga (27x27 mm, 1.0 mm ball pitch)
Цоколевка для MCF5475VR200 (корпус 388-pin pbga (27x27 mm, 1.0 mm ball pitch)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для MCF5475VR200.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
MCF5475VR200 подходит для 6 применениеs: Industrial Networking Gateway, Factory Automation Controller, Point-of-Sale Terminal, Network-Attached Printer / MFP Controller, Secure Communication Appliance, HMI / Operator Interface Panel.
Industrial Networking Gateway
The MCF5475VR200's dual 10/100 Ethernet MACs with independent DMA, hardware MMU for memory protection, and integrated encryption accelerator (SEC) make it well-suited for industrial protocol gateways converting between EtherNet/IP, PROFINET, Modbus TCP, and serial fieldbuses. The 200 MHz ColdFire V4E core delivers enough processing headroom for real-time protocol translation while the SEC block off-loads AES/SHA operations for VPN or TLS tunnels. Placed on the main controller board with two PHY interfaces (one WAN, one LAN), it acts as the secure router between OT and IT networks. Compared to a software-only crypto solution, the hardware SEC block reduces CPU utilization by 40-60% on 100 Mbps IPsec traffic.
Рекомендуется
Factory Automation Controller
The MCF5475VR200's 32-bit PCI 2.2 controller, four UARTs, two SSI/SPI and two I2C ports allow it to act as a programmable automation controller (PAC) for PLC-like applications in factory automation. The Harvard architecture and hardware FPU deliver deterministic real-time performance for motion control loops, while the MMU supports protected real-time operating systems such as VxWorks or Green Hills INTEGRITY. Per NXP product documentation, the device operates from 1.5V core and 3.3V I/O, suitable for industrial backplanes. Designers typically pair the part with an external FPGA on PCI for high-speed I/O expansion (encoder counters, PWM generation).
Рекомендуется
Point-of-Sale Terminal
For POS terminals, the MCF5475VR200 provides PCI for magnetic-stripe readers, USB 2.0 device for printer/external peripherals, dual Ethernet for IP-based EFT transactions, and the SEC block for PIN-block encryption. The 200 MHz ColdFire V4E with hardware FPU handles inventory lookups and signature capture in real time. According to NXP, the integrated peripherals reduce the need for external bridges, lowering total BOM cost by 15-25% versus a discrete Ethernet+USB+PCI solution.
Рекомендуется
Network-Attached Printer / MFP Controller
The MCF5475VR200's dual Ethernet, PCI bus for image-processing ASICs, and USB 2.0 host/device make it an excellent MFP/multifunction-printer controller. The ColdFire V4E handles network protocol stacks (TCP/IP, SNMP, IPP, LPD), while the PCI connects to a hardware image-pipeline ASIC that processes 600 dpi scans in real time. NXP's product page highlights the 388-pin PBGA's ample signal count for parallel image-data buses.
Рекомендуется
Secure Communication Appliance
The hardware SEC encryption accelerator (DES/3DES/AES/SHA-1/MD5) makes the MCF5475VR200 a natural choice for VPN concentrators, SSL/TLS gateways, and other secure communication appliances. Per NXP documentation, the SEC block sustains >100 Mbps IPsec throughput, while the dual Ethernet MACs handle WAN/LAN routing. The MMU enables firewall filtering and secure OS deployments. Designers typically run a hardened Linux or VxWorks on the part for VPN termination.
Рекомендуется
HMI / Operator Interface Panel
The MCF5475VR200's PCI bus can drive a graphics controller for color LCD HMI panels, while its Ethernet ports connect to industrial controllers (PLCs, drives) for data acquisition. The hardware FPU accelerates graphical rendering and trend graphs typical in process-industry HMIs. The 388-pin PBGA provides enough GPIO for keypad scanning and indicator LEDs, reducing the need for external I/O expanders and simplifying the panel's BOM.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MCF5475VR200 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MCF5471VR200 | MCF5470VR200 | MCF5474VR266 | MCF5482CVR166 | MCF5471ZP200 |
|---|---|---|---|---|---|---|
| Package | 388-pin PBGA (27x27 mm) | 388-pin PBGA (27x27 mm) - same | 388-pin PBGA (27x27 mm) - same | 388-pin PBGA (27x27 mm) - same | 388-pin PBGA (27x27 mm) - same | 388-pin PBGA (27x27 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ColdFire V4E | ColdFire V4E | ColdFire V4E | ColdFire V4E | ColdFire V3 | ColdFire V4E |
| Maximum Core Frequency | 200 MHz | 200 MHz | 200 MHz | 266 MHz | 166 MHz | 200 MHz |
| MMU | Yes | Yes | Yes | Yes | Yes | Yes |
| FPU | Yes | Yes | Yes | Yes | No | Yes |
| Encryption Accelerator (SEC) | Yes (DES/3DES/AES/SHA) | No | No | Yes (DES/3DES/AES/SHA) | No | No |
| Ethernet MACs | 2x 10/100 | 2x 10/100 | 2x 10/100 | 2x 10/100 | 2x 10/100 | 2x 10/100 |
| Lifecycle Status | NRND | NRND | NRND | NRND | Obsolete | NRND |
Ключевые отличия
- Integrated hardware encryption accelerator (SEC) (против MCF5471VR200)
- Higher core frequency than legacy MCF5482 family (против MCF5482CVR166)
- 32-bit PCI 2.2 controller with DMA (против MCF54415CMJ250 (different package))
Заметки по проектированию
The 388-pin PBGA uses a 1.0 mm ball pitch - PCB design requires laser-drilled microvias or via-in-pad for the inner balls, with 4 mil trace/space rules on the top layer. Per NXP design guidelines, keep all PBGA balls on a single signal layer if possible and use a 6-layer stack-up with dedicated 1.5V and 3.3V power planes. Add 0402-size 0.1uF decoupling caps within 100 mil of every power-supply ball cluster, plus bulk 10uF tantalum or ceramic caps at each supply pin group.
Route Ethernet MII/RMII signals as 50 ohm controlled-impedance traces with matched lengths within each MII bus (data plus clock skew < 50 mil). PCI bus traces require 50/60 ohm impedance with series damping resistors (22-33 ohm) near the MCF5475VR200 pins. Per NXP reference designs, keep Ethernet and PCI trace lengths away from switching power supply magnetics to minimize coupling and radiated EMI.
Estimated: At full 200 MHz core clock with both Ethernet MACs and PCI active, the MCF5475VR200 dissipates approximately 1.5 W. The 388-pin PBGA has a theta_JA of roughly 18-22 C/W on a standard 4-layer JEDEC test board, yielding an 27-33 C junction-temperature rise above ambient. For sealed enclosures with no airflow, derate by 30% and consider a thermal pad connected to an inner ground plane.
Do not omit the external 50 MHz reference oscillator - the internal PLL multiplies this to the core clock and peripherals. Ensure the PLL power pin has its own 0.1uF cap and a ferrite bead to isolate it from digital noise. Bootstrap configuration pins (BCFG) must be held valid until POR completes or the device will boot into a test mode and fail to enumerate peripherals.
Информация о соответствии
Lead-free PBGA package confirmed per NXP packaging information. RoHS/REACH/AEC-Q100 specific declarations marked [DATA_NEEDED] pending retrieval of the latest manufacturer declaration of conformity.
