Microchip Technology

MCP3426A5-E/MC - 16-Bit Dual-Channel ADC | Microchip

Артикул: MCP3426A5-E/MC ✓ Активен
2.048 V Vdss 8-DFN (2 x 3 mm) Package
MOQ: 1 |

MCP3426A5-E/MC Обзор

The Microchip Technology MCP3426A5-E/MC is a 16-bit, dual-channel delta-sigma analog-to-digital converter with differential inputs, a 15 SPS conversion rate, and an 8-DFN 2x3 mm package. The device includes an onboard precision 2.048 V reference, which supports a differential input range of ±2.048 V. Its two independent analog channels make it suitable for precision measurement, sensor acquisition, and low-frequency industrial instrumentation.

A delta-sigma ADC is an analog-to-digital converter category that uses oversampling, digital filtering, and noise shaping to provide high resolution and excellent rejection of broadband and 50/60 Hz interference. The MCP3426 belongs to the broader hierarchy of delta-sigma ADC, analog-to-digital converter, data converter IC, and semiconductor. This architecture is especially useful when relatively slow acquisition must be paired with high effective resolution and stable behavior in electrically noisy environments.

Key features include resolution of up to 16 bits, two differential analog inputs, and an integrated 2.048 V precision reference. The 15 SPS conversion rate favors continuous low-level monitoring rather than high-speed waveform capture. Differential input architecture helps reject common-mode noise when paired with suitable sensor circuits, while the onboard reference simplifies designs that do not require an external low-noise reference source. The compact 8-DFN package also reduces board area compared with larger leaded packages.

The MCP3426 family uses a low-noise, high-accuracy delta-sigma conversion architecture and communicates through a serial interface suitable for microcontroller- and processor-based acquisition systems. The integrated reference establishes the converter's full-scale measurement basis, while external input conditioning determines whether the available range is used effectively. Differential channel structure is valuable for bridge sensors, current-shunt measurements, and other signals centered around a common reference point. The device's 2.7 V to 5.5 V operating supply range supports compatibility with common embedded supply rails.

Typical applications include industrial pressure and temperature monitoring, low-speed data acquisition, current sensing, resistance measurement, and portable instrumentation. The dual-channel architecture allows two related measurements to be captured with one converter, reducing component count when both channels share suitable excitation and reference conditions. For battery-powered or low-power embedded systems, the ADC can also serve as a low-speed precision measurement front end connected to a host microcontroller over its serial interface.

PCB implementation should place input, reference, and bypass connections in accordance with the manufacturer datasheet layout recommendations. Differential routing should preserve symmetry between each positive and negative input, and a quiet grounding strategy is important because the converter's resolution can expose noise generated by surrounding circuitry. Input filtering must preserve the required source impedance while preventing out-of-band noise from degrading measurement accuracy.

This product page combines the Microchip family specifications, exact-orderable-package information, configuration alternatives, and application-oriented design guidance for engineers evaluating the MCP3426A5-E/MC. It also distinguishes the hardware-compatible MCP3426 family options from replacements requiring a different package or a changed serial-interface address.

Аналоги без доработки для MCP3426A5-E/MC — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

MCP3426A5T-E/MC

✅ Прямая замена
📦 8-DFN (2 x 3 mm)
Same 16-bit, dual-channel, 15 SPS conversion configuration and 8-DFN footprint; orderable suffix changes the supplied form

📋 Справочный аналог (нет в каталоге)

MCP3426A5-E/MS

✅ Прямая замена
📦 8-DFN (2 x 3 mm)
Same 16-bit, dual-channel, 15 SPS family configuration; stated temperature range is -55°C to +125°C versus the commercial target configuration

📋 Справочный аналог (нет в каталоге)

MCP3426A7T-E/MC

✅ Прямая замена
📦 8-DFN (2 x 3 mm)
Same 16-bit, dual-channel, 15 SPS ADC family and footprint; the A7 configuration uses a different factory-programmed serial-interface address

📋 Справочный аналог (нет в каталоге)

MCP3426A5-E/MC Максимальные параметры и электрические характеристики

Converter Type Delta-sigma analog-to-digital converter
Разрешение Up to 16 bits
Number of Channels 2 channels
Input Type Differential inputs
Conversion Rate 15 SPS
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Рабочее напряжение питания 2.7 V to 5.5 V
Корпус 8-DFN (2 x 3 mm)
Тип монтажа Surface mount
Temperature Range -55°C to +125°C for MCP3426A5-E/MS
Analog Input Count 2 differential inputs
Conversion Architecture 1 sigma-delta converter
Reference Type On-board precision reference
Series MCP3426 series

Руководство по цоколевке MCP3426A5-E/MC в корпусе 8-dfn (2 x 3 mm)

Цоколевка для MCP3426A5-E/MC (корпус 8-dfn (2 x 3 mm)). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 8-dfn (2 x 3 mm) для MCP3426A5-E/MC

Нет подробных данных о распиновке для MCP3426A5-E/MC.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MCP3426A5-E/MC подходит для 6 применениеs: Industrial Pressure and Temperature Monitoring, Current-Shunt Measurement, Battery-Powered Environmental Sensing, Resistance and Bridge-Sensor Acquisition, Process-Control Instrumentation, Low-Speed Test and Measurement.

🏭

Industrial Pressure and Temperature Monitoring

The MCP3426A5-E/MC fits slow industrial measurements that require more resolution than a conventional low-cost ADC but do not require high-speed sampling. Its 16-bit resolution and 15 SPS rate suit pressure transmitters, temperature sensors, and resistive bridges whose signals change gradually. The two differential channels can acquire complementary measurements while rejecting common-mode noise. The integrated 2.048 V reference establishes a stable measurement basis, and the ±2.048 V differential range provides useful headroom for appropriately conditioned bridge outputs.

⚡

Current-Shunt Measurement

The MCP3426A5-E/MC can digitize a low-level voltage across a current-shunt element when the signal remains within its differential input range. Differential inputs reduce sensitivity to common-mode voltage and ground offsets that could affect a single-ended measurement. A 15 SPS conversion rate is appropriate for power monitoring, battery discharge analysis, and motor-control feedback rather than high-bandwidth protection. The 2.048 V onboard reference helps provide repeatable conversion results when the shunt signal is amplified or scaled appropriately.

🧩

Battery-Powered Environmental Sensing

The MCP3426A5-E/MC is well matched to portable instruments that periodically measure slow-changing environmental signals. Its 15 SPS rate avoids the excess throughput of a high-speed converter, while the resolution supports fine measurement steps over a controlled input range. Two channels reduce the need for a second ADC when temperature, humidity, light level, or gas-sensor outputs must be acquired together. The compact 8-DFN 2 x 3 mm package preserves board area in battery-powered industrial and IoT products.

⚖️

Resistance and Bridge-Sensor Acquisition

The MCP3426A5-E/MC supports precision resistance and bridge measurements when the transducer output is conditioned into the converter's ±2.048 V differential range. The differential architecture is valuable for sensor bridges because it suppresses common-mode excitation noise and offset. At 15 SPS, the converter is appropriate for weighing systems, force sensing, and slow position transducers. The 2.048 V precision reference provides a common conversion basis, while external excitation and differential filtering determine practical accuracy.

🏭

Process-Control Instrumentation

The MCP3426A5-E/MC is appropriate for process-control front ends that monitor slowly varying analog variables and transmit measurements to a controller. Two independent differential channels can reduce acquisition hardware when related process signals share compatible electrical characteristics. The 16-bit resolution improves numerical headroom over lower-resolution converters, while the 15 SPS rate is sufficient for many temperature, level, and pressure loops. Industrial designs should also verify the exact temperature grade and apply appropriate input protection.

🖥️

Low-Speed Test and Measurement

The MCP3426A5-E/MC can serve as the acquisition element in a low-speed measurement instrument when high resolution and input flexibility matter more than conversion bandwidth. The dual differential channels allow two precision inputs to be compared without requiring separate converters, while the internal 2.048 V reference simplifies standalone measurement systems. A 15 SPS rate suits calibrated voltage, resistance, and temperature measurements. For laboratory use, input buffering, reference bypass, and shielded differential routing can help preserve resolution.

Сводка рекомендуемых товаров

MCP3426 Family-level precision ADC used for low-speed sensor acquisition Используется в: Industrial Pressure and Temperature Monitoring, Current-Shunt Measurement, Battery-Powered Environmental Sensing, Resistance and Bridge-Sensor Acquisition, Process-Control Instrumentation, Low-Speed Test and Measurement MCP3427 Related delta-sigma ADC family option Используется в: Industrial Pressure and Temperature Monitoring, Current-Shunt Measurement, Resistance and Bridge-Sensor Acquisition, Low-Speed Test and Measurement MCP3428 Related delta-sigma ADC family option Используется в: Industrial Pressure and Temperature Monitoring, Battery-Powered Environmental Sensing, Process-Control Instrumentation
What is the MCP3426A5-E/MC and what are its key specifications?
The MCP3426A5-E/MC is a 16-bit, dual-channel delta-sigma ADC with differential inputs, a 15 SPS conversion rate, and an 8-DFN 2 x 3 mm package. According to the Microchip MCP3426 product page and the MCP3426/7/8 data sheet, it also includes a precision 2.048 V onboard reference, allowing a differential input range of ±2.048 V. The device is designed for precision, low-speed signal acquisition in compact embedded systems.
What is the operating voltage of the MCP3426A5-E/MC?
The MCP3426A5-E/MC operates from 2.7 V to 5.5 V. The 2.7 V to 5.5 V operating supply range is identified in the manufacturer documentation for the MCP3426A5-E/MS configuration and is applicable to the same MCP3426A5 family. This range allows use with 3.3 V and 5 V system rails, although the serial interface, reference accuracy, and analog front end must all be checked at the selected supply voltage.
How many bits of resolution does the MCP3426A5-E/MC provide?
The MCP3426A5-E/MC provides up to 16 bits of resolution. According to the Microchip MCP3426/7/8 data sheet, the MCP3426 is a low-noise, high-accuracy delta-sigma ADC family capable of converting analog inputs to digital codes with up to 16-bit resolution. Effective measurement accuracy in a complete system can be lower than nominal resolution because of noise, reference error, input conditioning, and other circuit limitations.
Where can I download the MCP3426A5-E/MC datasheet PDF?
The manufacturer data sheet for MCP3426A5-E/MC is available from the official Microchip PDF at the datasheet link on this page. It is titled “MCP3426/7/8 Data Sheet” and covers the common low-noise, high-accuracy 16-bit delta-sigma ADC family. Use its package drawings, electrical characteristics, serial-interface information, and recommended application circuit when assigning pins and designing the PCB.
Where can I find the MCP3426A5-E/MC pinout?
The MCP3426A5-E/MC pin assignment is shown in the pin-description and package drawings in the official Microchip MCP3426/7/8 data sheet. The exact-orderable MCP3426A5-E/MC is supplied in an 8-DFN 2 x 3 mm package. Use the pin-description table to identify supply, ground, analog-input, reference, and serial-interface connections before assigning PCB tracks.
What is the difference between the MCP3426A5-E/MC and MCP3426A5T-E/MC?
The MCP3426A5T-E/MC has the same 16-bit, dual-channel, 15 SPS ADC configuration and the same 8-DFN 2 x 3 mm package as the MCP3426A5-E/MC, with the orderable suffix identifying a different supplied form. According to the manufacturer family documentation, both belong to the MCP3426A5 configuration. Confirm the required mounting form and supplier packing method before treating them as interchangeable.
Can MCP3426A5-E/MS replace MCP3426A5-E/MC?
The MCP3426A5-E/MS is a pin-compatible 16-bit, dual-channel MCP3426A5-family option in the same 8-DFN package, but its specified temperature range of -55°C to +125°C differs from the commercial target configuration. According to manufacturer family information, the ADC conversion rate remains 15 SPS. Select it when the broader temperature qualification is required and the complete operating conditions have been reviewed.
When should I choose MCP3426A5-E/MC over another MCP3426A5 option?
Choose the MCP3426A5-E/MC when you need a compact, 16-bit, dual-channel delta-sigma ADC at 15 SPS with an integrated 2.048 V reference and an 8-DFN footprint. The MCP3426A5T-E/MC is preferable when its supplied form matches the assembly process, while the MCP3426A5-E/MS is attractive for a wider stated temperature range of -55°C to +125°C. The final choice should follow electrical, environmental, and mechanical requirements.
What is the best drop-in replacement for MCP3426A5-E/MC?
The MCP3426A5T-E/MC is the closest documented same-package option because it retains the 16-bit, dual-channel, 15 SPS MCP3426A5 configuration in an 8-DFN 2 x 3 mm package. MCP3426A5-E/MS offers another same-family footprint with a wider stated temperature range. Verify package drawings, serial-interface behavior, calibration expectations, and lifecycle requirements before approving either replacement.
What can replace MCP3426A5-E/MC without changing the PCB?
The MCP3426A5T-E/MC can be used where the same 8-DFN 2 x 3 mm land pattern and identical MCP3426A5 conversion function are required. The MCP3426A5-E/MS is another family-level candidate for the same footprint, with a stated -55°C to +125°C temperature range. An option with a different MCP3426 address suffix may require host firmware changes and should not be treated as an automatic drop-in replacement.
Is MCP3426A5-E/MC suitable for precision sensor measurement?
The MCP3426A5-E/MC is suitable for precision, low-speed sensor measurement when the sensor output is conditioned to fit the differential input range. Its up-to-16-bit resolution, 2.048 V onboard reference, and ±2.048 V differential range support accurate measurement of bridge, current-sense, and slowly changing industrial signals. The 15 SPS rate favors temperature, pressure, level, and general monitoring rather than fast waveform acquisition.
What are the key specifications of MCP3426A5-E/MC that engineers should know?
The principal specifications are 16-bit resolution, two differential input channels, 15 SPS conversion speed, a 2.048 V internal reference, ±2.048 V differential input range, a 2.7 V to 5.5 V supply range, and an 8-DFN 2 x 3 mm package. According to the Microchip MCP3426 product page and family data sheet, the converter is optimized for low-noise, high-accuracy acquisition rather than high-speed sampling.
Where can I buy MCP3426A5-E/MC online?
Use the “Request a Quote” form on this page to ask for MCP3426A5-E/MC availability, current unit pricing, minimum order quantity, and delivery timing. The form is the appropriate route for a quote-based electronic component purchase and for confirmation of the exact 8-DFN orderable configuration. No other seller, marketplace, or distributor is recommended here because channel availability can change independently of device lifecycle status.
What is the price of MCP3426A5-E/MC?
The current price of MCP3426A5-E/MC is returned through the “Request a Quote” form on this page. Submit the required quantity and the exact MCP3426A5-E/MC orderable suffix to obtain a current quotation. Pricing can vary with volume, procurement quantity, component condition, and supply status, so use the form for a transaction-ready figure rather than relying on an archived or approximate catalog value.
What is the lead time and stock status for MCP3426A5-E/MC?
Current stock and lead time for MCP3426A5-E/MC must be confirmed through the “Request a Quote” form on this page. Provide the required quantity, target date, and whether factory-new packaging is acceptable. The Microchip product page identifies the MCP3426 family as an active product offering, but live procurement availability is handled through the quote request.

Справочные инженерные данные для MCP3426A5-E/MC — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose MCP3426A5-E/MC for compact, low-speed precision acquisition requiring two differential channels, up-to-16-bit resolution, a 15 SPS conversion rate, and an integrated 2.048 V reference. Its 8-DFN 2 x 3 mm package is appropriate when board area is constrained and the device can be placed close to its source signal. MCP3426A5T-E/MC is the closest same-family option when its supplied form matches the assembly process. MCP3426A5-E/MS is preferable when the wider stated -55°C to +125°C range is valuable and the environmental requirements justify that configuration. MCP3426A7T-E/MC retains the converter family and footprint but uses a different factory-programmed serial-interface address; it should be selected only after the host firmware and bus plan are updated. None of these options should be chosen for high-speed waveform acquisition because the MCP3426 family's 15 SPS rate is optimized for slow, high-resolution measurements.

Сравнение с аналогами

Параметр Этот товар MCP3426A5T-E/MC MCP3426A5-E/MS MCP3426A7T-E/MC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-DFN (2 x 3 mm) 8-DFN (2 x 3 mm) 8-DFN (2 x 3 mm) 8-DFN (2 x 3 mm)
Resolution Up to 16 bits 16 bits 16 bits 16 bits
Channel Count 2 differential inputs 2 differential inputs 2 differential inputs 2 differential inputs
Conversion Rate 15 SPS 15 SPS 15 SPS 15 SPS
Internal Reference 2.048 V precision reference 2.048 V precision reference 2.048 V precision reference 2.048 V precision reference
Differential Input Range ±2.048 V ±2.048 V ±2.048 V ±2.048 V
Operating Supply Voltage 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Serial Interface Address A5 configuration A5 configuration A5 configuration A7 configuration; address differs from A5

Ключевые отличия

  • Exact A5 conversion configuration with dual differential channels (против MCP3426A7T-E/MC)
  • Broader stated temperature qualification (против MCP3426A5T-E/MC)
  • Compact two-channel precision conversion (против MCP3426A5T-E/MC)

Заметки по проектированию

Route each differential input pair as a symmetrical signal path and keep the positive and negative traces close together. Place input filtering components close to the corresponding converter pins, and provide a quiet return path to the device ground. The high-resolution architecture can resolve small voltage differences, so unequal routing, nearby switching nodes, and shared ground-current paths can directly degrade the measured result.

Use the manufacturer datasheet's recommended supply and reference bypassing arrangement, and keep high-current return paths away from the analog input and ground pins. The MCP3426A5-E/MC supports a 2.7 V to 5.5 V operating range, but stable reference and conversion performance depend on clean supply voltage. Verify capacitor voltage ratings, placement, and the permitted range of source impedance for the selected filter network before fabrication.

Do not select the A7 configuration as an unconditional firmware-compatible replacement for the A5 configuration. Although it belongs to the same MCP3426 family and uses the same 8-DFN footprint, the factory-programmed serial-interface address differs. Confirm the host firmware address, repeated-start behavior, bus address assignment, and any multi-device bus topology before approving that substitution.

Choose analog filtering according to the required bandwidth rather than simply increasing capacitance. Excessively high source impedance or aggressive filtering can influence the converter's conversion accuracy and settle time. Begin with the manufacturer example values, calculate the attenuation at the signal bandwidth of interest, and verify the resulting noise bandwidth and settling behavior in the final board configuration.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer product page and family data sheet identify the device as an industrial ADC, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

MCP3426A5-E/MC MCP3426A5-E/MC datasheet MCP3426A5-E/MC datasheet pdf MCP3426A5-E/MC pinout MCP3426A5-E/MC equivalent MCP3426A5-E/MC replacement MCP3426A5-E/MC price MCP3426A5-E/MC stock MCP3426A5-E/MC vs MCP3426A5T-E/MC MCP3426 16-bit 15 SPS ADC MCP3426 8-DFN pinout Microchip MCP3426A5-E/MC

Связанные компоненты & термины

Microchip Technology MCP3426A5-E/MC MCP3426A5T-E/MC MCP3426A5-E/MS MCP3426A7T-E/MC MCP3426 delta-sigma ADC analog-to-digital converter data converter IC semiconductor differential input 16-bit resolution 15 SPS conversion rate 2.048 V precision reference ±2.048 V differential input range 8-DFN DFN package family surface-mount package I2C serial interface industrial sensor acquisition process instrumentation current-shunt measurement bridge sensor battery-powered measurement
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ