MCP3426A5-E/MC - 16-Bit Dual-Channel ADC | Microchip
N.º da peça: MCP3426A5-E/MC ✓ AtivoMCP3426A5-E/MC Visão geral
A delta-sigma ADC is an analog-to-digital converter category that uses oversampling, digital filtering, and noise shaping to provide high resolution and excellent rejection of broadband and 50/60 Hz interference. The MCP3426 belongs to the broader hierarchy of delta-sigma ADC, analog-to-digital converter, data converter IC, and semiconductor. This architecture is especially useful when relatively slow acquisition must be paired with high effective resolution and stable behavior in electrically noisy environments.
Key features include resolution of up to 16 bits, two differential analog inputs, and an integrated 2.048 V precision reference. The 15 SPS conversion rate favors continuous low-level monitoring rather than high-speed waveform capture. Differential input architecture helps reject common-mode noise when paired with suitable sensor circuits, while the onboard reference simplifies designs that do not require an external low-noise reference source. The compact 8-DFN package also reduces board area compared with larger leaded packages.
The MCP3426 family uses a low-noise, high-accuracy delta-sigma conversion architecture and communicates through a serial interface suitable for microcontroller- and processor-based acquisition systems. The integrated reference establishes the converter's full-scale measurement basis, while external input conditioning determines whether the available range is used effectively. Differential channel structure is valuable for bridge sensors, current-shunt measurements, and other signals centered around a common reference point. The device's 2.7 V to 5.5 V operating supply range supports compatibility with common embedded supply rails.
Typical applications include industrial pressure and temperature monitoring, low-speed data acquisition, current sensing, resistance measurement, and portable instrumentation. The dual-channel architecture allows two related measurements to be captured with one converter, reducing component count when both channels share suitable excitation and reference conditions. For battery-powered or low-power embedded systems, the ADC can also serve as a low-speed precision measurement front end connected to a host microcontroller over its serial interface.
PCB implementation should place input, reference, and bypass connections in accordance with the manufacturer datasheet layout recommendations. Differential routing should preserve symmetry between each positive and negative input, and a quiet grounding strategy is important because the converter's resolution can expose noise generated by surrounding circuitry. Input filtering must preserve the required source impedance while preventing out-of-band noise from degrading measurement accuracy.
This product page combines the Microchip family specifications, exact-orderable-package information, configuration alternatives, and application-oriented design guidance for engineers evaluating the MCP3426A5-E/MC. It also distinguishes the hardware-compatible MCP3426 family options from replacements requiring a different package or a changed serial-interface address.
Alternativas drop-in para MCP3426A5-E/MC — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
MCP3426A5T-E/MC
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MCP3426A5-E/MS
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MCP3426A7T-E/MC
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
MCP3426A5-E/MC Classificações máximas e características elétricas
| Converter Type | Delta-sigma analog-to-digital converter |
| Resolução | Up to 16 bits |
| Number of Channels | 2 channels |
| Input Type | Differential inputs |
| Conversion Rate | 15 SPS |
| Internal Reference Voltage | 2.048 V |
| Differential Input Range | ±2.048 V |
| Tensão de alimentação de operação | 2.7 V to 5.5 V |
| Encapsulamento | 8-DFN (2 x 3 mm) |
| Tipo de montagem | Surface mount |
| Temperature Range | -55°C to +125°C for MCP3426A5-E/MS |
| Analog Input Count | 2 differential inputs |
| Conversion Architecture | 1 sigma-delta converter |
| Reference Type | On-board precision reference |
| Series | MCP3426 series |
Guia de Configuração de Pinos do MCP3426A5-E/MC 8-dfn (2 x 3 mm)
Configuração de pinos para MCP3426A5-E/MC (pacote 8-dfn (2 x 3 mm)). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para MCP3426A5-E/MC.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MCP3426A5-E/MC é adequado para 6 aplicaçãos: Industrial Pressure and Temperature Monitoring, Current-Shunt Measurement, Battery-Powered Environmental Sensing, Resistance and Bridge-Sensor Acquisition, Process-Control Instrumentation, Low-Speed Test and Measurement.
Industrial Pressure and Temperature Monitoring
The MCP3426A5-E/MC fits slow industrial measurements that require more resolution than a conventional low-cost ADC but do not require high-speed sampling. Its 16-bit resolution and 15 SPS rate suit pressure transmitters, temperature sensors, and resistive bridges whose signals change gradually. The two differential channels can acquire complementary measurements while rejecting common-mode noise. The integrated 2.048 V reference establishes a stable measurement basis, and the ±2.048 V differential range provides useful headroom for appropriately conditioned bridge outputs.
Recomendado
Current-Shunt Measurement
The MCP3426A5-E/MC can digitize a low-level voltage across a current-shunt element when the signal remains within its differential input range. Differential inputs reduce sensitivity to common-mode voltage and ground offsets that could affect a single-ended measurement. A 15 SPS conversion rate is appropriate for power monitoring, battery discharge analysis, and motor-control feedback rather than high-bandwidth protection. The 2.048 V onboard reference helps provide repeatable conversion results when the shunt signal is amplified or scaled appropriately.
Recomendado
Battery-Powered Environmental Sensing
The MCP3426A5-E/MC is well matched to portable instruments that periodically measure slow-changing environmental signals. Its 15 SPS rate avoids the excess throughput of a high-speed converter, while the resolution supports fine measurement steps over a controlled input range. Two channels reduce the need for a second ADC when temperature, humidity, light level, or gas-sensor outputs must be acquired together. The compact 8-DFN 2 x 3 mm package preserves board area in battery-powered industrial and IoT products.
Recomendado
Resistance and Bridge-Sensor Acquisition
The MCP3426A5-E/MC supports precision resistance and bridge measurements when the transducer output is conditioned into the converter's ±2.048 V differential range. The differential architecture is valuable for sensor bridges because it suppresses common-mode excitation noise and offset. At 15 SPS, the converter is appropriate for weighing systems, force sensing, and slow position transducers. The 2.048 V precision reference provides a common conversion basis, while external excitation and differential filtering determine practical accuracy.
Recomendado
Process-Control Instrumentation
The MCP3426A5-E/MC is appropriate for process-control front ends that monitor slowly varying analog variables and transmit measurements to a controller. Two independent differential channels can reduce acquisition hardware when related process signals share compatible electrical characteristics. The 16-bit resolution improves numerical headroom over lower-resolution converters, while the 15 SPS rate is sufficient for many temperature, level, and pressure loops. Industrial designs should also verify the exact temperature grade and apply appropriate input protection.
Recomendado
Low-Speed Test and Measurement
The MCP3426A5-E/MC can serve as the acquisition element in a low-speed measurement instrument when high resolution and input flexibility matter more than conversion bandwidth. The dual differential channels allow two precision inputs to be compared without requiring separate converters, while the internal 2.048 V reference simplifies standalone measurement systems. A 15 SPS rate suits calibrated voltage, resistance, and temperature measurements. For laboratory use, input buffering, reference bypass, and shielded differential routing can help preserve resolution.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MCP3426A5-E/MC — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MCP3426A5T-E/MC | MCP3426A5-E/MS | MCP3426A7T-E/MC |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) | 8-DFN (2 x 3 mm) |
| Resolution | Up to 16 bits | 16 bits | 16 bits | 16 bits |
| Channel Count | 2 differential inputs | 2 differential inputs | 2 differential inputs | 2 differential inputs |
| Conversion Rate | 15 SPS | 15 SPS | 15 SPS | 15 SPS |
| Internal Reference | 2.048 V precision reference | 2.048 V precision reference | 2.048 V precision reference | 2.048 V precision reference |
| Differential Input Range | ±2.048 V | ±2.048 V | ±2.048 V | ±2.048 V |
| Operating Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Serial Interface Address | A5 configuration | A5 configuration | A5 configuration | A7 configuration; address differs from A5 |
Principais diferenciais
- Exact A5 conversion configuration with dual differential channels (vs MCP3426A7T-E/MC)
- Broader stated temperature qualification (vs MCP3426A5T-E/MC)
- Compact two-channel precision conversion (vs MCP3426A5T-E/MC)
Notas de projeto
Route each differential input pair as a symmetrical signal path and keep the positive and negative traces close together. Place input filtering components close to the corresponding converter pins, and provide a quiet return path to the device ground. The high-resolution architecture can resolve small voltage differences, so unequal routing, nearby switching nodes, and shared ground-current paths can directly degrade the measured result.
Use the manufacturer datasheet's recommended supply and reference bypassing arrangement, and keep high-current return paths away from the analog input and ground pins. The MCP3426A5-E/MC supports a 2.7 V to 5.5 V operating range, but stable reference and conversion performance depend on clean supply voltage. Verify capacitor voltage ratings, placement, and the permitted range of source impedance for the selected filter network before fabrication.
Do not select the A7 configuration as an unconditional firmware-compatible replacement for the A5 configuration. Although it belongs to the same MCP3426 family and uses the same 8-DFN footprint, the factory-programmed serial-interface address differs. Confirm the host firmware address, repeated-start behavior, bus address assignment, and any multi-device bus topology before approving that substitution.
Choose analog filtering according to the required bandwidth rather than simply increasing capacitance. Excessively high source impedance or aggressive filtering can influence the converter's conversion accuracy and settle time. Begin with the manufacturer example values, calculate the attenuation at the signal bandwidth of interest, and verify the resulting noise bandwidth and settling behavior in the final board configuration.
Informações de conformidade
The manufacturer product page and family data sheet identify the device as an industrial ADC, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified.