Microchip Technology

MCP6044-I/SL - 14 kHz Quad CMOS Op Amp | Microchip

Артикул: MCP6044-I/SL ✓ Активен
1.4 V Vdss 600 nA Id 14-lead SOIC Package
MOQ: 1 |

MCP6044-I/SL Обзор

The Microchip Technology MCP6044-I/SL is a quad CMOS operational amplifier with a 14 kHz gain-bandwidth product, a typical operating current of 600 nA, and rail-to-rail input and output operation in a 14-lead SOIC package. The device supports single-supply operation from 1.4 V to 6 V and is designed for low-power signal-conditioning systems. Each of its four amplifiers combines rail-to-rail inputs with rail-to-rail output swing, making the MCP6044 suitable for portable, industrial, wearable, and battery-powered equipment.

An operational amplifier, or op amp, is a high-gain differential amplifier used to amplify, filter, buffer, or compare small voltage signals. The quad configuration places four amplifiers in one package, reducing board area in designs that require multiple independent analog channels. Within the power-management and signal-processing hierarchy, the MCP6044 belongs to the CMOS operational-amplifier family, where rail-to-rail operation, low supply current, and low offset voltage are important characteristics for portable instrumentation.

Key features include a 14 kHz gain-bandwidth product, a typical operating current of 600 nA, and a less-than-3 mV offset voltage. The manufacturer specifies less than 1 uA maximum quiescent current per amplifier and operation from a single supply as low as 1.4 V. Rail-to-rail input capability permits the input common-mode voltage to approach the supply limits, while rail-to-rail output swing improves usable output range in low-voltage systems. These attributes make the part suitable for sensor conditioning, current sensing, low-frequency filtering, and general-purpose buffering.

The MCP6044 uses Microchip's advanced CMOS technology to provide low bias current, high open-loop gain, and high-speed operation relative to other micropower amplifiers. Its 14 kHz gain-bandwidth product is appropriate for low-frequency precision and instrumentation applications rather than high-speed waveform or signal-integrity workloads. Because each amplifier is independent, users can configure the four channels for different functions, such as a transimpedance stage, an active filter, an instrumentation amplifier, or four voltage followers, while observing common supply and grounding requirements.

Typical applications include low-power process-control loops, portable sensor interfaces, wearable-device signal paths, low-current measurement circuits, and low-voltage data-acquisition systems. A sensor front end can use one channel for amplification and another for buffering or filtering. An industrial measurement system can use the four channels to condition multiple inputs while keeping the power budget low. In each case, the 600 nA typical operating current helps preserve battery life, while the 1.4 V minimum supply supports compact low-energy systems.

Designers should verify signal bandwidth and closed-loop stability against the 14 kHz gain-bandwidth product, check common-mode and output limits over the full supply range, and provide adequate bypass capacitance close to the supply pins. Stable operation with capacitive loads requires careful gain selection and output isolation. The industrial temperature suffix identifies the specified qualification option, but the manufacturer datasheet should be used for the exact temperature limits and electrical tolerances.

This product page consolidates the manufacturer's principal operating characteristics, package information, drop-in family alternatives, and practical analog-design guidance. It supports engineers comparing the MCP6044-I/SL with nearby Microchip variants and designing low-power, rail-to-rail signal-conditioning circuits without changing the 14-lead SOIC footprint.

Аналоги без доработки для MCP6044-I/SL — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MCP6044-I/SL (тот же форм-фактор и посадочное место) — отличается по Package, Typical Operating Current.

Microchip Technology
Package: 14-pin SOIC, 0.154 in (3.90 mm) width
Typical Operating Current: 600 nA per amplifier

MCP6044-E/SL

✅ Прямая замена
Microchip Technology
📦 14-lead SOIC
4 amplifiers · 14 kHz · 600 nA per amplifier · Less than 1 uA per amplifier · Less than 3 mV · 1.4 V · 6 V · Rail-to-rail

Уточнить цену

Открыть даташит →

MCP6044T-I/SL

✅ Прямая замена
📦 14-lead SOIC
Same 14 kHz gain-bandwidth product, 1.4 V minimum supply, and less-than-1 uA maximum quiescent current per amplifier; only the documented suffix designation differs

📋 Справочный аналог (нет в каталоге)

MCP6044T-E/SL

✅ Прямая замена
📦 14-lead SOIC
Same 14 kHz gain-bandwidth product, 1.4 V minimum supply, and less-than-1 uA maximum quiescent current per amplifier; the E and T suffix designations differ

📋 Справочный аналог (нет в каталоге)

MCP6044-I/SL Максимальные параметры и электрические характеристики

Amplifier Type Quad CMOS operational amplifier
Number of Amplifiers 4 circuits
Gain-Bandwidth Product 14 kHz
Typical Operating Current 600 nA
Maximum Quiescent Current per Amplifier Less than 1 uA
Minimum Single-Supply Voltage 1.4 V
Maximum Supply Voltage 6 V
Input Operating Mode Rail-to-rail
Output Swing Rail-to-rail
Typical Offset Voltage Less than 3 mV
Typical Slew Rate 0.003 V/us
Open-Loop Gain High open-loop gain
Bias Current Low bias current
Корпус 14-lead SOIC
Тип монтажа Surface mount

Руководство по цоколевке MCP6044-I/SL в корпусе 14-lead soic

Цоколевка для MCP6044-I/SL (корпус 14-lead soic). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 14-lead soic для MCP6044-I/SL

Нет подробных данных о распиновке для MCP6044-I/SL.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MCP6044-I/SL подходит для 6 применениеs: Low-Power Sensor Signal Conditioning, Battery-Powered Portable Instruments, Industrial Process-Control Loops, Wearable Device Analog Front Ends, Low-Voltage Data Acquisition, Precision Current and Voltage Monitoring.

🧩

Low-Power Sensor Signal Conditioning

The MCP6044-I/SL fits sensor front ends that must amplify small signals without exhausting a limited power budget. Its 600 nA typical operating current, less-than-3 mV typical offset voltage, and rail-to-rail input operation support measurements from sensors operating near the supply rails. Place the amplifier between the sensor and an ADC, use a gain appropriate for the 14 kHz gain-bandwidth product, and bypass the supply close to the device. The advantage is a four-channel package that can amplify, filter, or buffer several low-frequency sensor signals while remaining compatible with operation from a supply as low as 1.4 V.

📱

Battery-Powered Portable Instruments

MCP6044-I/SL is appropriate for portable instruments that combine several analog channels with a constrained battery budget. A typical operating current of 600 nA and a maximum quiescent current below 1 uA per amplifier reduce the continuous load, while the 1.4 V minimum supply supports low-voltage energy sources and compact regulators. Four independent channels can handle excitation buffering, signal amplification, active filtering, and output buffering. Design the gain and settling requirements around the 14 kHz gain-bandwidth product and include the complete signal path in the battery-current calculation.

🏭

Industrial Process-Control Loops

The four rail-to-rail amplifier channels in MCP6044-I/SL support low-frequency industrial process-control and measurement circuits. The device can condition multiple sensor outputs, provide active filtering, or form gain stages around a controller input. Its less-than-3 mV typical offset voltage helps preserve small-signal accuracy, while the 14 kHz gain-bandwidth product covers slow process signals. Confirm the amplifier's common-mode behavior and output swing at the actual supply voltage, and keep high-energy switching loops physically separated from sensitive analog traces.

📱

Wearable Device Analog Front Ends

MCP6044-I/SL suits wearable electronics that require multiple low-power analog functions in a small area. Four channels can amplify biometric or motion-sensor signals, implement crossover or smoothing filters, and buffer inputs to a mixed-signal controller. Rail-to-rail inputs and outputs improve signal utilization in compact single-supply systems, and the 600 nA typical operating current supports power-conscious operation. The 14 kHz bandwidth is suitable for many physiological and inertial signals, but gain, noise, and settling requirements must be checked for each channel before choosing passive-component values.

🖥️

Low-Voltage Data Acquisition

MCP6044-I/SL can serve as the analog front end in a compact low-voltage data-acquisition system. Four channels can buffer multiplexed sensor inputs, implement anti-alias filtering, or provide programmable gain ahead of an ADC. Rail-to-rail input and output capability allows operation close to the supply limits, while the 1.4 V minimum supply supports low-energy conversion systems. Account for the 14 kHz gain-bandwidth product when selecting closed-loop gain, ensure settling is complete within the acquisition interval, and keep the analog return path continuous beneath the device.

⚡

Precision Current and Voltage Monitoring

MCP6044-I/SL is well matched to low-current monitoring circuits where amplifier self-consumption and input error must remain small. Its less-than-3 mV typical offset voltage can help limit measurement error in low-level amplifier stages, and its low quiescent current reduces disturbance to the monitored power budget. The four channels allow simultaneous conditioning of voltage, current, reference, or temperature signals. Select feedback values and gain carefully because the 14 kHz gain-bandwidth product defines the usable closed-loop bandwidth, and verify output swing under the worst-case load.

Сводка рекомендуемых товаров

MCP6044-E/SL Microchip Technology Используется в: Low-Power Sensor Signal Conditioning, Battery-Powered Portable Instruments, Industrial Process-Control Loops, Wearable Device Analog Front Ends, Low-Voltage Data Acquisition, Precision Current and Voltage Monitoring MCP6044T-I/SL Same-family 14-lead SOIC option Используется в: Low-Power Sensor Signal Conditioning, Industrial Process-Control Loops, Wearable Device Analog Front Ends, Precision Current and Voltage Monitoring MCP6044T-E/SL Same-family SOIC option for temperature-qualified portable designs Используется в: Battery-Powered Portable Instruments, Low-Voltage Data Acquisition
What are the key specifications of MCP6044-I/SL that engineers should know?
The MCP6044-I/SL is a quad CMOS operational amplifier with a 14 kHz gain-bandwidth product, 600 nA typical operating current, less than 1 uA maximum quiescent current per amplifier, and rail-to-rail input and output operation. According to the Microchip Technology MCP6044 product information, it operates from a single supply as low as 1.4 V and provides less than 3 mV typical offset voltage. The four amplifiers are integrated in a 14-lead SOIC package for compact, low-power analog signal conditioning.
Where can I download the MCP6044 datasheet PDF?
The MCP6044-I/SL datasheet is available through the manufacturer product page and the linked Microchip family datasheet. It documents the MCP6041, MCP6042, MCP6043, and MCP6044 operating-amplifier family, including supply range, input and output behavior, electrical characteristics, and package information. Use the manufacturer datasheet as the authoritative source for pin assignments, test conditions, limits, and application guidance when designing the 14-lead SOIC footprint.
What is the supply voltage range of MCP6044-I/SL?
The MCP6044-I/SL operates from a single supply of 1.4 V to 6 V. The manufacturer family information identifies operation at supplies as low as 1.4 V, while the component comparison information lists a 6 V upper supply limit. Rail-to-rail input and output behavior is especially useful at the lower end of this range, where usable input and output voltage headroom is limited.
Is MCP6044-I/SL suitable for battery-powered applications?
Yes, the MCP6044-I/SL is well suited to battery-powered and portable equipment because its typical operating current is 600 nA and its maximum quiescent current is less than 1 uA per amplifier. Its ability to operate from a 1.4 V single supply also supports low-energy designs. Actual battery-life calculations should include sensor current, load current, regulator efficiency, and the selected operating mode in addition to amplifier quiescent current.
What can replace MCP6044-I/SL on the same 14-lead SOIC footprint?
The MCP6044-E/SL is a direct family alternative that retains the 14-lead SOIC format and the 14 kHz, 1.4 V, and sub-1 uA electrical characteristics, with a different temperature-grade suffix. The MCP6044T-I/SL and MCP6044T-E/SL are also documented in 14-lead SOIC comparisons. Confirm the exact temperature grade, pinout, electrical limits, and qualification requirements against the manufacturer datasheet before substitution.
What is the best Microchip equivalent for MCP6044-I/SL?
The closest documented Microchip family choice is MCP6044-E/SL because it uses the same 14-lead SOIC package and shares the 1.4 V minimum supply, 14 kHz gain-bandwidth product, and less-than-1 uA maximum quiescent current per amplifier. The selection should be confirmed against temperature-grade requirements. The MCP6044T-I/SL and MCP6044T-E/SL provide additional documented SOIC options with distinct suffix qualifications.
What is the difference between MCP6044-I/SL and MCP6044-E/SL?
Both parts are quad, 14 kHz, 1.4 V rail-to-rail CMOS operational amplifiers in a 14-lead SOIC package, with less than 1 uA maximum quiescent current per amplifier. Their principal distinction is the qualification suffix: I denotes the industrial-temperature option and E denotes the extended-temperature option. Verify the exact temperature limits in the manufacturer datasheet and confirm that the selected part meets the end product's environmental requirements.
When should I choose MCP6044-I/SL over MCP6044-E/SL?
Choose MCP6044-I/SL when the equipment operates within its industrial temperature qualification and the industrial-grade suffix is explicitly required by the bill of materials or qualification plan. Choose MCP6044-E/SL when the application requires the extended-temperature qualification. Both retain the same 14-lead SOIC footprint and the key 1.4 V minimum-supply, 14 kHz bandwidth, and low-current characteristics.
Is MCP6044-I/SL suitable for industrial process-control measurements?
Yes, MCP6044-I/SL is identified by the manufacturer as suitable for industrial process control and has an industrial temperature suffix. Its four rail-to-rail amplifier channels can condition multiple low-frequency sensor signals while consuming a typical operating current of 600 nA. Confirm loop accuracy, common-mode range, output loading, noise, and the exact operating-temperature limits for the installation environment.
Can MCP6044-I/SL replace MCP6024-I/SN?
MCP6024-I/SN should not be treated as a drop-in replacement for MCP6044-I/SL without a complete pinout and parameter comparison. The MCP6024 is a dual amplifier, while the MCP6044 contains four amplifiers in a 14-lead SOIC package, so the channel count and circuit implementation differ. Use the MCP6044-E/SL or another documented MCP6044 SOIC variant when an exact same-footprint family replacement is required.
Why should MCP6044-I/SL have bypass capacitors near the supply pins?
MCP6044-I/SL should have local supply bypassing to keep the supply impedance low and reduce coupling of noise into the four amplifier channels. Place the bypass capacitor close to the device's supply and ground pins, keep the return path short, and route analog output traces away from switching nodes. The manufacturer datasheet and its decoupling guidance should determine the final capacitance values and stability configuration.
What is the gain-bandwidth limitation of MCP6044-I/SL?
The MCP6044-I/SL has a 14 kHz gain-bandwidth product, so closed-loop bandwidth decreases as the selected noise gain increases. It is best suited to low-frequency sensing, buffering, filtering, and control functions rather than high-speed waveform amplification. Designers should calculate the required closed-loop bandwidth, phase margin, output-swing margin, and capacitive-load tolerance before finalizing the gain network.
Where can I buy MCP6044-I/SL and check its current availability?
Use the Request a Quote form on this page to ask for MCP6044-I/SL price, stock, lead time, and the required 14-lead SOIC shipping configuration. The form lets you specify quantity and sourcing requirements without relying on a static price or availability statement. Confirm the exact MPN suffix and package before requesting a quotation.
What is the current price of MCP6044-I/SL?
The current commercial terms for MCP6044-I/SL are presented through the Request a Quote form on this page. Submit the required quantity, shipment destination, and packaging preference to obtain a current quotation. Because component pricing and inventory can change, the form provides a more reliable transaction path than a static listing price.
What is the lead time and stock status for MCP6044-I/SL?
Current stock and lead time for MCP6044-I/SL should be confirmed through the Request a Quote form on this page. Include your required quantity, delivery location, and acceptable date so the sourcing response reflects the actual order configuration. Do not infer availability from a distributor search result because inventory levels and fulfillment schedules can change independently.

Справочные инженерные данные для MCP6044-I/SL — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose MCP6044-I/SL for low-voltage, low-power analog designs requiring four rail-to-rail amplifier channels in a 14-lead SOIC package. It is particularly appropriate for portable sensing, battery-operated instrumentation, industrial process-control loops, and low-voltage data-acquisition systems. Its 600 nA typical operating current, 1.4 V minimum supply, and 14 kHz gain-bandwidth product provide a clear operating envelope for slow sensor and control signals. Select MCP6044-E/SL when the extended-temperature suffix is required, or MCP6044T-I/SL and MCP6044T-E/SL when those documented same-family qualification options better match the product plan. All listed alternatives retain the 14-lead SOIC format and core electrical characteristics, but the suffix must be checked against environmental requirements. This family is not intended for high-speed video, RF, or waveform applications requiring bandwidth substantially above 14 kHz.

Сравнение с аналогами

Параметр Этот товар MCP6044-E/SL MCP6044T-I/SL MCP6044T-E/SL
Package 14-lead SOIC 14-lead SOIC 14-lead SOIC 14-lead SOIC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Amplifier Configuration Quad operational amplifier Quad operational amplifier Quad operational amplifier Quad operational amplifier
Gain-Bandwidth Product 14 kHz 14 kHz 14 kHz 14 kHz
Typical Operating Current 600 nA 600 nA 600 nA 600 nA
Maximum Quiescent Current per Amplifier Less than 1 uA Less than 1 uA Less than 1 uA Less than 1 uA
Minimum Single-Supply Voltage 1.4 V 1.4 V 1.4 V 1.4 V
Maximum Supply Voltage 6 V 6 V 6 V 6 V
Input and Output Operation Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output

Ключевые отличия

  • Very low power for a quad amplifier (против MCP6044-E/SL)
  • Single-supply operation supports compact systems (против MCP6044T-I/SL)
  • Rail-to-rail signal range improves utilization (против MCP6044T-E/SL)

Заметки по проектированию

Place the supply bypass capacitor immediately beside the MCP6044-I/SL supply and ground connections. Keep the high-frequency return path short and avoid routing sensitive analog inputs across the noisy supply path. Because the device supports operation from 1.4 V, verify regulator startup, dropout behavior, ground offset, and output-swing margins at the lowest operating supply. The amplifier's less-than-1 uA maximum quiescent current per channel is useful for battery designs, but total system current also includes load, bias-network, and sensor currents.

Do not select a high closed-loop gain without checking the 14 kHz gain-bandwidth product. For example, a noise gain of 10 leaves approximately 1.4 kHz of nominal gain-bandwidth, while higher noise gains reduce it further. Use the manufacturer gain-bandwidth and stability guidance to choose feedback resistors and capacitors, and verify settling time for signal-acquisition and process-control applications.

Keep the four amplifier channels on the same 14-lead SOIC electrically quiet and physically separate from switching-regulator outputs, inductors, relay contacts, and high-current return paths. Route outputs directly to their destinations rather than passing them near input pins. Use a continuous ground plane where practical, place input-bias and feedback components close to the associated pins, and account for parasitic capacitance from long traces when driving capacitive loads.

Rail-to-rail operation does not eliminate all supply-rail or common-mode limitations. Check the input and output voltage ranges in the manufacturer datasheet across temperature and process conditions, and avoid driving an output hard against a supply rail when the next stage requires additional headroom. When replacing MCP6044-I/SL with another suffix, verify temperature limits, electrical tolerances, pin names, and qualification rather than relying on package shape alone.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No explicit compliance declaration is included in the manufacturer product information or component listings.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

mcp6044 datasheet MCP6044-I/SL datasheet MCP6044-I/SL pinout MCP6044-I/SL schematic MCP6044-I/SL equivalent MCP6044-I/SL replacement MCP6044-I/SL price MCP6044-I/SL stock Microchip MCP6044-I/SL MCP6044 14 kHz op amp MCP6044-I/SL vs MCP6044-E/SL MCP6044 14-SOIC pinout

Связанные компоненты & термины

Microchip Technology MCP6044-I/SL MCP6044 MCP6044-E/SL MCP6044T-I/SL MCP6044T-E/SL operational amplifier op amp quad operational amplifier CMOS operational amplifier rail-to-rail input rail-to-rail output gain-bandwidth product quiescent current offset voltage single-supply operation 14-lead SOIC surface mount low-power instrumentation industrial process control battery-powered equipment wearable electronics sensor signal conditioning advanced CMOS technology
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ