Microchip Technology

MCP6142-I/P - Dual 600nA Rail-to-Rail Op Amp | Microchip

Артикул: MCP6142-I/P ✓ Активен
1.4 V to 5.5 V Vdss 600 nA per amplifier Id 8-PDIP, 0.300 inch (7.62 mm) pitch Package
MOQ: 1 |

MCP6142-I/P Обзор

The Microchip Technology MCP6142-I/P is a dual, general-purpose operational amplifier with 600 nA typical quiescent current per amplifier, rail-to-rail input and output capability, and a 1.4 V to 5.5 V operating supply range. Each channel provides a typical gain-bandwidth product of 100 kHz, and the device is packaged in an 8-pin PDIP format.

An operational amplifier is a voltage-controlled differential amplifier whose inverting and non-inverting inputs determine the gain and behavior of an analog signal chain. The MCP6142 belongs to the low-power operational-amplifier hierarchy, combining an amplifier function with rail-to-rail signal handling in a package designed for low-voltage systems. Rail-to-rail input operation expands the usable common-mode range, while rail-to-rail output allows the output voltage to approach either supply rail under suitable load conditions.

The principal features of the MCP6142-I/P are its low power consumption, wide single-supply operating range, dual-channel configuration, and 100 kHz typical gain-bandwidth product. Maximum quiescent current is 1 microampere per amplifier, making the device suitable for systems where standby and active current are important constraints. Its non-unity-gain-stable architecture is intended for low-frequency analog applications that do not require the bandwidth of a general-purpose high-speed amplifier.

Microchip describes the MCP6142 as part of the MCP6141, MCP6142, MCP6143, and MCP6144 family of 600 nA, non-unity-gain-stable, rail-to-rail input and output operational amplifiers. The family provides single, dual, and quad channel options, with the MCP6143 adding a chip-select function. This architecture is particularly useful when low quiescent current must be balanced against a modest but practical gain-bandwidth product of 100 kHz.

Typical applications include battery-powered sensor interfaces, portable measurement systems, low-current analog signal conditioning, general-purpose dual-amplifier circuits, and industrial or automotive equipment operating from low-voltage supplies. The two independent channels can amplify different sensors, implement filters, drive small-signal analog stages, or provide gain and buffering functions in one package.

Design the surrounding circuit with the 1.4 V to 5.5 V supply range in mind. Confirm input and output common-mode behavior for the selected gain, load, and temperature, and verify that the required output swing remains practical for the connected load. Place bypass capacitance close to the supply pins and route feedback and input traces away from noisy or high-current paths to preserve low-level signal integrity.

This product data combines the key manufacturer characteristics, package details, application guidance, and design considerations into a practical engineering reference. It also distinguishes verified performance from parameters that require confirmation in the manufacturer datasheet before a new board is released.

Аналоги без доработки для MCP6142-I/P — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с MCP6142-I/P (тот же форм-фактор и посадочное место) — отличается по Input Common-Mode Range, Maximum Quiescent Current, Output Swing, Package, Slew Rate.

Microchip Technology
Input Common-Mode Range: Rail-to-rail
Maximum Quiescent Current: 1 uA maximum
Output Swing: Rail-to-rail

Для этого товара нет аналогов без доработки.

Запросить аналоги

MCP6142-I/P Максимальные параметры и электрические характеристики

Amplifier Type General-purpose operational amplifier
Number of Channels 2 circuits
Supply Voltage Range 1.4 V to 5.5 V
Typical Quiescent Current 600 nA per amplifier
Maximum Quiescent Current 1 uA per amplifier
Typical Gain-Bandwidth Product 100 kHz
Input Common-Mode Range Rail-to-rail input
Output Swing Rail-to-rail output
Gain Stability Non-unity gain stable
Slew Rate 0.003 V/us
Корпус 8-PDIP, 0.300 inch (7.62 mm) pitch
Тип монтажа Through-hole
Packaging Tube

Руководство по цоколевке MCP6142-I/P в корпусе 8-pdip, 0.300 inch (7.62 mm) pitch

Цоколевка для MCP6142-I/P (корпус 8-pdip, 0.300 inch (7.62 mm) pitch). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса 8-pdip, 0.300 inch (7.62 mm) pitch для MCP6142-I/P

Нет подробных данных о распиновке для MCP6142-I/P.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

MCP6142-I/P подходит для 6 применениеs: Battery-Powered Sensor Conditioning, Portable Measurement Instrumentation, Low-Power Active Filters, Industrial Low-Voltage Control, General-Purpose Dual Signal Conditioning, Automotive or Mobile Low-Power Interfaces.

🔋

Battery-Powered Sensor Conditioning

The MCP6142-I/P is appropriate for battery-powered sensor conditioning because each channel draws 600 nA of typical quiescent current, with a maximum of 1 uA per amplifier. Place one channel in a non-inverting gain configuration and use the second for filtering or output buffering. Rail-to-rail input and output operation across the 1.4 V to 5.5 V supply range helps retain usable signal range, while the 100 kHz typical gain-bandwidth product supports low-frequency sensor signals. The design trade-off is that its 0.003 V/us slew rate is not intended for high-speed transients.

📱

Portable Measurement Instrumentation

The MCP6142-I/P fits portable measurement instruments where two channels can amplify or buffer low-level signals without consuming a large standby budget. Its dual general-purpose architecture allows one channel to condition a sensor while the other handles a reference or monitor signal. Operating from 1.4 V to 5.5 V supports low-voltage portable systems, and the 100 kHz typical gain-bandwidth product is useful for slowly varying measurements. Verify the required accuracy, offset, and noise specifications before using it for precision instrumentation.

🔧

Low-Power Active Filters

The MCP6142-I/P can implement active filters because its 100 kHz typical gain-bandwidth product provides useful bandwidth for low-frequency transfer functions while maintaining a maximum quiescent current of 1 uA per amplifier. One channel can form the main filter stage and the other can buffer a reference or perform post-filter conditioning. The non-unity-gain-stable architecture is suitable for conventional closed-loop filter gains, but component tolerances and the amplifier's finite output drive must be included in the response analysis.

🏭

Industrial Low-Voltage Control

The MCP6142-I/P is suitable for low-voltage industrial control blocks that require signal amplification close to a sensor or actuator interface. Its dual configuration can process two related channels, while the 1.4 V to 5.5 V supply range accommodates compact control systems. Rail-to-rail operation helps preserve signal swing, but designers should verify operating-temperature limits, electromagnetic interference exposure, and input offset requirements against the manufacturer datasheet before deploying the device in a regulated industrial enclosure.

⚙️

General-Purpose Dual Signal Conditioning

The MCP6142-I/P supports general-purpose dual signal-conditioning tasks such as gain, buffering, impedance conversion, and small-signal amplification. Two independent channels reduce the number of amplifier packages required on a board, while the low 600 nA typical quiescent current per channel limits the continuous overhead. The 100 kHz typical gain-bandwidth product is adequate for many low-frequency analog paths, but applications requiring greater bandwidth, lower offset voltage, or faster settling should use a different amplifier family.

🚗

Automotive or Mobile Low-Power Interfaces

The MCP6142-I/P can be evaluated for mobile or automotive low-power interfaces because it operates from 1.4 V to 5.5 V and offers rail-to-rail input and output behavior. Its two channels can support paired sensing or diagnostic functions while keeping typical quiescent current at 600 nA per amplifier. Before using it in an automotive design, confirm AEC-Q100 qualification for the exact ordering code, the complete operating-temperature range, transient requirements, and load behavior in the current Microchip documentation.

Сводка рекомендуемых товаров

MCP6141 Single-channel member of the same low-power amplifier family Используется в: Battery-Powered Sensor Conditioning, Portable Measurement Instrumentation, Low-Power Active Filters, Industrial Low-Voltage Control, General-Purpose Dual Signal Conditioning, Automotive or Mobile Low-Power Interfaces MCP6144 Quad-channel member of the same low-power amplifier family Используется в: Battery-Powered Sensor Conditioning, Low-Power Active Filters, Industrial Low-Voltage Control, General-Purpose Dual Signal Conditioning MCP6143 Single-channel family option with chip select Используется в: Portable Measurement Instrumentation, Automotive or Mobile Low-Power Interfaces
What is the MCP6142-I/P?
The MCP6142-I/P is a dual, low-power operational amplifier with rail-to-rail input and output operation over a 1.4 V to 5.5 V supply range. According to the Microchip manufacturer datasheet, each amplifier draws 600 nA typically, with maximum quiescent current of 1 uA, and has a typical gain-bandwidth product of 100 kHz. The device is a non-unity-gain-stable general-purpose amplifier in an 8-pin PDIP package.
What are the key specifications of MCP6142-I/P that engineers should know?
The MCP6142-I/P combines two amplifier channels, 1.4 V to 5.5 V operation, rail-to-rail input and output capability, and a 100 kHz typical gain-bandwidth product. According to the Microchip manufacturer datasheet, typical quiescent current is 600 nA per amplifier and maximum quiescent current is 1 uA per amplifier. The package is 8-PDIP with 0.300 inch (7.62 mm) lead spacing, and the specified slew rate is 0.003 V/us.
Where can I download the MCP6142-I/P datasheet PDF?
The MCP6142-I/P datasheet PDF is available from Microchip Technology through the official product-document link on this page. It covers the MCP6141, MCP6142, MCP6143, and MCP6144 family, including electrical characteristics, rail-to-rail operation, low-power behavior, and available packages. Use the manufacturer document when finalizing supply limits, offset voltage, bias current, temperature limits, and detailed application values.
Where can I find the MCP6142-I/P pinout?
The MCP6142-I/P pinout is presented in the pin-configuration section of the Microchip MCP6142 manufacturer datasheet. The part uses an 8-PDIP package with a 0.300 inch (7.62 mm) lead pitch. Because the individual terminal names are not reproduced in the product excerpts, use the official pin-configuration drawing when assigning traces and confirming each channel's supply, input, and output connections.
What is the operating voltage range of MCP6142-I/P?
The MCP6142-I/P operates from 1.4 V to 5.5 V as a single supply. According to the Microchip manufacturer product page, both the input and output paths support rail-to-rail operation over this supply range. This makes the amplifier suitable for low-voltage battery-powered systems, although the selected gain and load must still satisfy the input and output limits defined in the manufacturer datasheet.
Why is the MCP6142-I/P suitable for battery-powered circuits?
The MCP6142-I/P is suitable for battery-powered circuits because its quiescent current is 600 nA typically per amplifier and does not exceed 1 uA per amplifier. According to the Microchip manufacturer datasheet, the family was designed for battery applications that need more frequency response than extremely low-power alternatives can provide. Its 100 kHz typical gain-bandwidth product supports low-frequency filtering and signal conditioning while keeping supply demand low.
What is the difference between MCP6142-I/P and MCP6142T-I/SN?
Both parts belong to the MCP6142 dual-amplifier family, but MCP6142-I/P is an 8-PDIP tube-packaged option while MCP6142T-I/SN uses a surface-mount package. The MCP6142T-I/SN suffix identifies its specific ordering and packaging configuration, so it is not a drop-in replacement on a through-hole PCB. Check both mechanical drawings and grade-related ordering information before selecting between them.
Is MCP6142-I/P the same as MCP6142T-I/SN?
No, the MCP6142-I/P and MCP6142T-I/SN are not mechanically interchangeable. The MCP6142-I/P uses an 8-PDIP through-hole package, while MCP6142T-I/SN is a surface-mount ordering variant. Although the parts are members of the same amplifier family, package geometry, lead layout, and production ordering codes differ, so a PCB footprint change is required.
When should I choose MCP6142-I/P over another low-power dual op amp?
Choose the MCP6142-I/P when the design needs two amplifier channels, operation from 1.4 V to 5.5 V, rail-to-rail input and output behavior, and very low quiescent current in a through-hole package. According to the Microchip manufacturer datasheet, its typical gain-bandwidth product is 100 kHz, making it suitable for low-frequency filtering and sensing. Select a different amplifier only when wider bandwidth, lower offset, lower noise, or another package is required.
Is MCP6142-I/P suitable for low-power sensor interfaces?
Yes, the MCP6142-I/P is well suited to low-power sensor interfaces that operate from a single supply between 1.4 V and 5.5 V. Its 600 nA typical quiescent current per amplifier reduces standby demand, while rail-to-rail input capability helps preserve signal range near the supply rails. The 100 kHz typical gain-bandwidth product is appropriate for many sensor, filtering, and general signal-conditioning stages.
What is the best drop-in replacement for MCP6142-I/P?
No verified drop-in replacement is established for the MCP6142-I/P in the available component cross-references. A valid substitute must use the same 8-PDIP footprint, preserve pin-to-pin signal and power connections, and remain within the required electrical limits. Rather than treating a surface-mount order code as interchangeable, use the manufacturer cross-reference resources and compare the candidate's package, rail-to-rail behavior, current consumption, offset, and stability.
Can an MCP6142 replace an MCP6141 in the same circuit?
The MCP6142 cannot replace an MCP6141 on the same PCB footprint because the MCP6142 is a dual amplifier and the MCP6141 is a single amplifier. Both are members of the same low-power, rail-to-rail family, but their channel counts and package pin assignments differ. Use the MCP6142 when two independent amplifier functions are available; redesign the layout if one MCP6141 position must be populated.
What are the MCP6142-I/P design limitations?
The primary design limitations are its 1.4 V to 5.5 V supply range, 100 kHz typical gain-bandwidth product, and 0.003 V/us slew rate. These characteristics make it appropriate for low-frequency, low-power analog circuits rather than high-speed signal chains. The MCP6142-I/P is also non-unity gain stable, so confirm the required noise gain against the stability guidance in the Microchip manufacturer datasheet.
How should the MCP6142-I/P be laid out on a PCB?
Place the MCP6142-I/P close to the bypass capacitor and route the supply connection with a short, low-impedance path. Keep amplifier inputs and feedback traces away from switching nodes, inductors, and high-current return paths, and use a quiet ground reference for both channels. Because the device targets low-current applications, extra care is still required to prevent leakage, copper contamination, or unintended oscillation from degrading the measured signal.
Where can I buy MCP6142-I/P and check current lead time?
Use the Request a Quote form on this page to request MCP6142-I/P availability, current lead time, order quantities, and packaging requirements. The MCP6142-I/P is listed in an 8-PDIP tube package, and the manufacturer family page identifies it as a dual low-power amplifier. A sourcing confirmation should include the exact MCP6142-I/P suffix so that the requested part is not confused with another package option.
Is MCP6142-I/P compliant with RoHS, REACH, or AEC-Q100?
The RoHS, REACH, and AEC-Q100 status of the exact MCP6142-I/P ordering code must be confirmed from the current Microchip product declaration or material-compliance documentation. Do not infer automotive qualification from the industrial-temperature suffix alone. For a production release, request the compliance record associated with MCP6142-I/P and confirm whether the intended installation requires AEC-Q100 qualification.

Справочные инженерные данные для MCP6142-I/P — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the MCP6142-I/P when the board needs two general-purpose amplifier channels, a single supply from 1.4 V to 5.5 V, rail-to-rail input and output behavior, and very low quiescent current in a through-hole package. Its 100 kHz typical gain-bandwidth product works well for sensor interfaces, low-frequency filters, buffering, and general analog conditioning. Select the MCP6141 when only one channel is needed, or the MCP6144 when four channels justify the larger package. Do not use a different package suffix as a PCB drop-in: the MCP6142T-I/SN is surface mount and requires a different footprint. For designs requiring lower offset, lower noise, wider bandwidth, higher output current, or confirmed automotive qualification, compare those requirements against the manufacturer family specifications before finalizing the MCP6142-I/P selection.

Сравнение с аналогами

Параметр Этот товар
Package 8-PDIP, 0.300 inch (7.62 mm) pitch
Brand Microchip Technology
Number of Amplifier Channels 2 circuits
Supply Voltage Range 1.4 V to 5.5 V
Typical Quiescent Current per Amplifier 600 nA
Maximum Quiescent Current per Amplifier 1 uA
Typical Gain-Bandwidth Product 100 kHz
Input Common-Mode Capability Rail-to-rail input
Output Capability Rail-to-rail output
Gain Stability Non-unity gain stable
Slew Rate 0.003 V/us
Amplifier Type General-purpose operational amplifier

Ключевые отличия

  • Dual-channel low-power amplifier in one through-hole package (против MCP6141)
  • Wide low-voltage operating range (против MCP6142T-I/SN)
  • Low quiescent current with practical bandwidth (против MCP6144)

Заметки по проектированию

Account for both quiescent current and load-related supply demand. The MCP6142-I/P has 600 nA typical quiescent current per amplifier and a 1 uA maximum, but output current and internal operating current increase as the circuit drives a load. For a battery design, calculate the average and peak current separately, include downstream bias currents, and verify that the selected regulator can support the resulting load without excessive supply ripple.

Use a compact, quiet layout because the MCP6142-I/P is intended for low-current and potentially low-noise measurements. Place the supply bypass capacitor close to the device, provide a low-impedance ground return, and keep input and feedback traces away from switching regulators, digital clocks, and inductor connections. Treat the 100 kHz gain-bandwidth product as a firm bandwidth constraint and avoid routing that allows feedback-node coupling from adjacent channels.

Do not assume rail-to-rail operation guarantees usable output swing at every load. The exact output range, input common-mode limits, offset voltage, and stable gain range must be checked in the Microchip manufacturer datasheet for the selected supply voltage and temperature. Also confirm the 1.4 V minimum supply and the non-unity gain-stable architecture before attempting a unity-gain follower configuration or a precision gain stage.

Keep each amplifier channel's high-impedance input node physically small and protect it from surface leakage, flux residue, and moisture. Route the two channels away from one another when one carries a high-level signal and the other measures a small sensor output. If the source impedance is high, verify that bias-current errors, input capacitance, and the selected feedback network do not create excessive settling time or channel crosstalk.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The exact ordering code's environmental and automotive compliance status requires confirmation through current Microchip compliance documentation.

Данные проверены: 2026-11-10 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

mcp6142 datasheet MCP6142-I/P datasheet MCP6142-I/P datasheet pdf MCP6142-I/P pinout MCP6142-I/P operating voltage MCP6142-I/P quiescent current MCP6142-I/P rail to rail MCP6142-I/P 8-PDIP MCP6142-I/P battery powered MCP6142-I/P drop-in replacement MCP6142-I/P vs MCP6142T-I/SN MCP6142-I/P price and stock

Связанные компоненты & термины

Microchip Technology MCP6142-I/P MCP6141 MCP6142T-I/SN MCP6143 MCP6144 operational amplifier dual amplifier general-purpose amplifier low-power amplifier rail-to-rail input rail-to-rail output quiescent current gain-bandwidth product GBWP slew rate non-unity gain stable single-supply operation 8-PDIP through-hole package battery-powered applications sensor interfaces active filters analog signal conditioning low-current measurement
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ