MCP6142-I/P - Dual 600nA Rail-to-Rail Op Amp | Microchip
MPN: MCP6142-I/P ✓ פעילMCP6142-I/P סקירה
An operational amplifier is a voltage-controlled differential amplifier whose inverting and non-inverting inputs determine the gain and behavior of an analog signal chain. The MCP6142 belongs to the low-power operational-amplifier hierarchy, combining an amplifier function with rail-to-rail signal handling in a package designed for low-voltage systems. Rail-to-rail input operation expands the usable common-mode range, while rail-to-rail output allows the output voltage to approach either supply rail under suitable load conditions.
The principal features of the MCP6142-I/P are its low power consumption, wide single-supply operating range, dual-channel configuration, and 100 kHz typical gain-bandwidth product. Maximum quiescent current is 1 microampere per amplifier, making the device suitable for systems where standby and active current are important constraints. Its non-unity-gain-stable architecture is intended for low-frequency analog applications that do not require the bandwidth of a general-purpose high-speed amplifier.
Microchip describes the MCP6142 as part of the MCP6141, MCP6142, MCP6143, and MCP6144 family of 600 nA, non-unity-gain-stable, rail-to-rail input and output operational amplifiers. The family provides single, dual, and quad channel options, with the MCP6143 adding a chip-select function. This architecture is particularly useful when low quiescent current must be balanced against a modest but practical gain-bandwidth product of 100 kHz.
Typical applications include battery-powered sensor interfaces, portable measurement systems, low-current analog signal conditioning, general-purpose dual-amplifier circuits, and industrial or automotive equipment operating from low-voltage supplies. The two independent channels can amplify different sensors, implement filters, drive small-signal analog stages, or provide gain and buffering functions in one package.
Design the surrounding circuit with the 1.4 V to 5.5 V supply range in mind. Confirm input and output common-mode behavior for the selected gain, load, and temperature, and verify that the required output swing remains practical for the connected load. Place bypass capacitance close to the supply pins and route feedback and input traces away from noisy or high-current paths to preserve low-level signal integrity.
This product data combines the key manufacturer characteristics, package details, application guidance, and design considerations into a practical engineering reference. It also distinguishes verified performance from parameters that require confirmation in the manufacturer datasheet before a new board is released.
חלופות תחליף ישיר עבור MCP6142-I/P — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MCP6142-I/P (אותו גורם צורה וטביעת רגל) — שונים ב Input Common-Mode Range, Maximum Quiescent Current, Output Swing, Package, Slew Rate.
אין חלופות תואמות Drop-in עבור מוצר זה.
בקשת חלופותMCP6142-I/P דירוגים מרביים ומאפיינים חשמליים
| Amplifier Type | General-purpose operational amplifier |
| Number of Channels | 2 circuits |
| Supply Voltage Range | 1.4 V to 5.5 V |
| Typical Quiescent Current | 600 nA per amplifier |
| Maximum Quiescent Current | 1 uA per amplifier |
| Typical Gain-Bandwidth Product | 100 kHz |
| Input Common-Mode Range | Rail-to-rail input |
| Output Swing | Rail-to-rail output |
| Gain Stability | Non-unity gain stable |
| Slew Rate | 0.003 V/us |
| מארז | 8-PDIP, 0.300 inch (7.62 mm) pitch |
| סוג הרכבה | Through-hole |
| Packaging | Tube |
מדריך תצורת פינים של MCP6142-I/P 8-pdip, 0.300 inch (7.62 mm) pitch
תצורת פינים עבור MCP6142-I/P (מארזת 8-pdip, 0.300 inch (7.62 mm) pitch). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור MCP6142-I/P.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MCP6142-I/P מתאים עבור 6 יישוםs: Battery-Powered Sensor Conditioning, Portable Measurement Instrumentation, Low-Power Active Filters, Industrial Low-Voltage Control, General-Purpose Dual Signal Conditioning, Automotive or Mobile Low-Power Interfaces.
Battery-Powered Sensor Conditioning
The MCP6142-I/P is appropriate for battery-powered sensor conditioning because each channel draws 600 nA of typical quiescent current, with a maximum of 1 uA per amplifier. Place one channel in a non-inverting gain configuration and use the second for filtering or output buffering. Rail-to-rail input and output operation across the 1.4 V to 5.5 V supply range helps retain usable signal range, while the 100 kHz typical gain-bandwidth product supports low-frequency sensor signals. The design trade-off is that its 0.003 V/us slew rate is not intended for high-speed transients.
מומלץ
Portable Measurement Instrumentation
The MCP6142-I/P fits portable measurement instruments where two channels can amplify or buffer low-level signals without consuming a large standby budget. Its dual general-purpose architecture allows one channel to condition a sensor while the other handles a reference or monitor signal. Operating from 1.4 V to 5.5 V supports low-voltage portable systems, and the 100 kHz typical gain-bandwidth product is useful for slowly varying measurements. Verify the required accuracy, offset, and noise specifications before using it for precision instrumentation.
מומלץ
Low-Power Active Filters
The MCP6142-I/P can implement active filters because its 100 kHz typical gain-bandwidth product provides useful bandwidth for low-frequency transfer functions while maintaining a maximum quiescent current of 1 uA per amplifier. One channel can form the main filter stage and the other can buffer a reference or perform post-filter conditioning. The non-unity-gain-stable architecture is suitable for conventional closed-loop filter gains, but component tolerances and the amplifier's finite output drive must be included in the response analysis.
מומלץ
Industrial Low-Voltage Control
The MCP6142-I/P is suitable for low-voltage industrial control blocks that require signal amplification close to a sensor or actuator interface. Its dual configuration can process two related channels, while the 1.4 V to 5.5 V supply range accommodates compact control systems. Rail-to-rail operation helps preserve signal swing, but designers should verify operating-temperature limits, electromagnetic interference exposure, and input offset requirements against the manufacturer datasheet before deploying the device in a regulated industrial enclosure.
מומלץ
General-Purpose Dual Signal Conditioning
The MCP6142-I/P supports general-purpose dual signal-conditioning tasks such as gain, buffering, impedance conversion, and small-signal amplification. Two independent channels reduce the number of amplifier packages required on a board, while the low 600 nA typical quiescent current per channel limits the continuous overhead. The 100 kHz typical gain-bandwidth product is adequate for many low-frequency analog paths, but applications requiring greater bandwidth, lower offset voltage, or faster settling should use a different amplifier family.
מומלץ
Automotive or Mobile Low-Power Interfaces
The MCP6142-I/P can be evaluated for mobile or automotive low-power interfaces because it operates from 1.4 V to 5.5 V and offers rail-to-rail input and output behavior. Its two channels can support paired sensing or diagnostic functions while keeping typical quiescent current at 600 nA per amplifier. Before using it in an automotive design, confirm AEC-Q100 qualification for the exact ordering code, the complete operating-temperature range, transient requirements, and load behavior in the current Microchip documentation.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור MCP6142-I/P — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה |
|---|---|
| Package | 8-PDIP, 0.300 inch (7.62 mm) pitch |
| Brand | Microchip Technology |
| Number of Amplifier Channels | 2 circuits |
| Supply Voltage Range | 1.4 V to 5.5 V |
| Typical Quiescent Current per Amplifier | 600 nA |
| Maximum Quiescent Current per Amplifier | 1 uA |
| Typical Gain-Bandwidth Product | 100 kHz |
| Input Common-Mode Capability | Rail-to-rail input |
| Output Capability | Rail-to-rail output |
| Gain Stability | Non-unity gain stable |
| Slew Rate | 0.003 V/us |
| Amplifier Type | General-purpose operational amplifier |
מבדילים עיקריים
- Dual-channel low-power amplifier in one through-hole package (לעומתMCP6141)
- Wide low-voltage operating range (לעומתMCP6142T-I/SN)
- Low quiescent current with practical bandwidth (לעומתMCP6144)
הערות תכנון
Account for both quiescent current and load-related supply demand. The MCP6142-I/P has 600 nA typical quiescent current per amplifier and a 1 uA maximum, but output current and internal operating current increase as the circuit drives a load. For a battery design, calculate the average and peak current separately, include downstream bias currents, and verify that the selected regulator can support the resulting load without excessive supply ripple.
Use a compact, quiet layout because the MCP6142-I/P is intended for low-current and potentially low-noise measurements. Place the supply bypass capacitor close to the device, provide a low-impedance ground return, and keep input and feedback traces away from switching regulators, digital clocks, and inductor connections. Treat the 100 kHz gain-bandwidth product as a firm bandwidth constraint and avoid routing that allows feedback-node coupling from adjacent channels.
Do not assume rail-to-rail operation guarantees usable output swing at every load. The exact output range, input common-mode limits, offset voltage, and stable gain range must be checked in the Microchip manufacturer datasheet for the selected supply voltage and temperature. Also confirm the 1.4 V minimum supply and the non-unity gain-stable architecture before attempting a unity-gain follower configuration or a precision gain stage.
Keep each amplifier channel's high-impedance input node physically small and protect it from surface leakage, flux residue, and moisture. Route the two channels away from one another when one carries a high-level signal and the other measures a small sensor output. If the source impedance is high, verify that bias-current errors, input capacitance, and the selected feedback network do not create excessive settling time or channel crosstalk.
מידע על תאימות
The exact ordering code's environmental and automotive compliance status requires confirmation through current Microchip compliance documentation.